Liczymy pasujące modele…
My version of the helmet from the Martian. I never had the opportunity to see the original in person so this is done from watching the movie many times and represents my best estimate of size and proportions. Some adaptations for 3D…
Open PC frame II. Uses less filament compared to OPF-1 and is more compact. (https://www.prusaprinters.org/prints/80195-open-pc-frame-1-opf-1). Just 30x45x40cm. Designed to be able to use two radiators to keep the RTX 3090 in check.…
Template to make it easy to cut shields for the Prusa protective face shield Print instructions Just any filament will do
Heavy duty camera cage for DSLRs and other cameras. Arca style frame all around This cage doesn't obscure access to the USB and HDMI ports of Canon cameras. Also included is a monitor adapter for 7-8 inch monitors with VESA mount…
Modular rack to organize all the spray cans in your shop. Got sick of rummaging around for the right color. All in direct view now. Designed to be printed on a 20x20x17.5cm print bed. 2x 15 mm M4 screws/module. End piece has no pins on…
Heavy duty tripod ball head for small and large format cameras. Needed something for a 6x7 camera and DSLRs. I printed this in Carbon fiber PETG. Make sure that there are no supports placed in the threads as this will mess them up. Firmly…
Open PC frame 3. The PC parts become structural components in this build. A lot of parts so that all can be printed on a 20x20 print bed. You probably want custom cables with this one. Printed in carbon fiber PETG for dimensional…
Canon FD to RF adapter. Printed in two parts. Wet sand with 400 grit so that you get exactly 22mm height. 3x10mm M2 screws and glue in place when all fits well. Printed in CF-PETG (Atomic filament). 3 perimeter 5 bottom and 7 top layers…
Small stand with VESA 75mm mount for 7-8 inch monitors. Needs a 3cm M6 screw, washers and nut. 4x M4 8mm to mount the monitor. Empiricus@Dremomys Print Settings Printer Brand: Wanhao Printer: Duplicator 6 Rafts: No Supports: No…
Here is a quick release clamp and plate for DSLRs and other cameras. Made this because I needed a larger number of these that are compatible with other release plates. Bigger than these usually are (88x70x25mm) for stability. I printed…
35mm film adapter parts for Mamiya RZ67. I use the 220 film backs for this. Tested with Kodak and Ilford cartidges. You can use the included uptake spools or spool into a second film cartridge. Printed in PETG with a 0.6mm nozzle at 0.2mm…
A sturdy shade and a gimbal protector for the Mavic Pro. Couldn't find one that fits well and I kept loosing them in high wind. After inserting the hooks in the front, push with both thumbs from the back forward and down to lock in place.…
Just a fun starfish with organic looking surface. Was meant to replace dried sea stars as props. Glue both parts together. Printed with 0.2 mm nozzle in PETG. Empiricus@Dremomys Print Settings Printer Brand: Monoprice Printer: Maker…
Just a hood for the screen of the Canon R5. May fit other cameras with a screen size of 60x84x7.5mm. 61.4 and 61.6 wide versions to accommodate for different filament shrinkage and less calibrated printers.
I wanted all my ports on one side and a minimal number of fans. This is printed with Atomic filament Carbon fiber PETG on a Railcore. 0.2mm layer height, 2 perimeter 25% infill, 5 bottom 7 top layer. The 1.7kg frame has to hold 12-14kg of…
L-bracket I made for Canon 5D Mark II-IV and 6D, but it should fit other DSLRs as well. Printed this in Carbonfiber PETG 5 layers all around and 50% triangle infill. After printing snap off the support and the lower bars on the arca style…
Modular Paint Rack. Ridiculously sturdy and inescapable. Will hold bottles with a diameter of 25, 35 and 50 mm and brushes. Needs a 30x30cm print bed and 2-2.5kg of filament. M3 screws and nuts to hold things together. Orient the part so…
Two caps for Leica M system lenses.
Tactile sculpture bowl Print instructions Any filament. No support required. Wet sand with 220, 400 and 800 grid.
Made this is to stop hunting around for tools in drawers and to obviate the chaos on the desk. Ad as many sections as you need. Added LED lights and a touch toggle switch just because its fun. Connections between sections are made with…
Revision of the Open PC frame II. Less filament and much cleaner. The blue parts in the frame pictures are the revised ones. Mobo sits on 5.5 mm tall printed spacers (glue on after putting in the heat inserts). Printed in carbon fiber…
Barnack Leica film trimmer. Two version of the baseplate let me know which one works best for you.
Here is a Tilt-Shift Adapter that can be configured to attach Canon EF or FD lenses to an EOS-M camera. Old FD lenses will allow to select the f-stop. EF lenses will have wide open aperture and the adapter allows for detailed control of…
Grip for Pentax 6x7. Made for my big hands and the index finger on the trigger. You need a 20mm M3 screw. Printed in Atomic filament CF-PETG. Version 2 has more space between grip and camera.
Mavic Pro Legs. Version 1 is similar to the original part. Version 2 and 3 legs have thicker attachment plates. Printed this Carbon fiber PETG and regular PETG. Empiricus@Dremomys Print Settings Printer Brand: Wanhao Printer: Duplicator 6…
M39 to EOS M adapter. Printed in Carbon fiber PETG at 0.1 mm layer height and support under the FD mount extensions. Adapter height should be 10.8mm. Wet sand with 400 grid if required.
Cap for Leica Elmarit-M 28mm and Summicron-M 35mm Lens Hood. The original hood cover sits very loose and is easily lost. The center part is pressed into the cover. Hold as shown and press slightly down to put the cover on. Pull off to…
This is fully functional adaptation of the remarkable Memory Orb for 3D printing. The original build thread can be found on therpf.com. www.therpf.com/showthread.php?t=289943. Please find details there. video:…
Turns out that it is not easy to balance a full frame DSLR and lens for cinematography. These things are heavy and holding 2-3kg in one hand is demanding. I added an arm brace so that the weight is better distributed and the stabilizer…
Finder Mask for framing 24x68 format images with the RZ67. Works with waist level or RZ67 AE prism finders. Printed in PETG and 0.15mm layer height with a 0.4mm nozzle.
Camera attachment for Rode Microphone Wireless Go with 1/4 inch thread. Printed in PETG. Empiricus@Dremomys Print Settings Printer: Railcore II Rafts: No Supports: Yes Resolution: 150 Infill: 30 Filament: Atomic Filament Carbon fiber PETG…
A Tilt-Shift adapter for using Pentax 6x7 lenses on Canon EF mount cameras. Shift and tilt can be set between plus/minus 17mm and 12.5 degree, respectively. I use it with the Pentax 6x7 1:4 55mm and an Canon 6D or 5DM2. The grip of the…
Focus tab for the Leica 50mm Summicron-M V5 and V3. Glued on with double sided foam tape that fits the recess in the part. Printed in CF-PETG for dimensional accuracy.
Adapter for mounting Pentax 6x7 lenses on Canon EF mount DSLRs. Locks the camera and the lens in position. Line the red dot on the lens with the small dot on the mount and turn to the larger dot until it locks. 1x 25mm M3 screw and nut…
This is a version with RC3 attachments with the visor extension of the NIH version. Print instructions PETG
Just to have fun with forms. Empiricus@Dremomys Print Settings Printer: Railcore Rafts: No Resolution: 0.1 Infill: 5% Filament: Atomic filament PLA Notes: Sand wet with 220, 400 and 800 grid. Category: Sculptures
Made this one as similar designs had a lot of mesh problems messing up Simplify 3D and filling the areas for the sticks. Anyway, this one should work with any slicer. Empiricus@Dremomys Print Settings Rafts: No Supports: No Resolution:…
Cover for Pentax 6x7 prisms. Printed in Atomic filament PETG.
Adapter Canon EOS M to Canon FD. Wet sand with 400 grid so that the two parts give you the right height of 24 mm if required. 3 12 mm M2 screws to hold he parts together. Printed in Carbon fiber PETG with 0.1 mm layer height with support…
Cooling for the Canon R5 to prevent overheating during long captures and on hot days. Added a hood to be able to use the screen better. Kirk Arca Camera Plate for Canon EOS R5 and R6 Digital Cameras. Adafruit Camcorder Battery Holder for…
Quick release mount for GoPro Hero 3 plus with or with out weather case. Included are some extensions to adjust the mount. Fits www.thingiverse.com/thing:2450904 Empiricus@Dremomys Print Settings Printer Brand: Wanhao Printer: Duplicator…
Had an unintended sudden deceleration and lost one of the rubber feet in the back of my Mavic Pro. As I attach larger legs there I needed a replacement. However, DJI doesn't make these available at this point in time outside of repair. So…
Camera utility shoe mounts with an M2 screw to secure the microphone/light/flash to the mount. Three versions: 1/4 Screw 1/4-20 thread 3/8-16 thread Empiricus@Dremomys Print Settings Printer Brand: Wanhao Printer: Duplicator 6 Rafts: No…
This is an insert to replace the filament guide between the hotend and the filament gear in E3D Titan Aero to better control flexible filaments. I bought a direct drive Titan Aero to work more with flexible filaments on my railcore 2…
Robot M26 to EOS M adapter. Will fit the old and newer vintage lenses. Printed in Carbon fiber PETG at 0.1 mm layer height and support under the FD mount extensions. Adapter height should be 13 mm. Wet sand with 400 grid if required.
Based on Nilo Rodis-Jamero concept art. I had to try to model this to see it in 3D. The most difficult part was the storm trooper though. Still have to finish the paint and weathering. Curious to see what the more experienced star wars…
Finally as much cooling air flow as you want thanks to the EBM-PAPST RLF35-8/14N blower. Version 11 M12 with stronger attachments on the left side. Version 10 M12 has an internal fin to direct more air out of the middle nozzle. This…
Here is a reusable mold for a silicone boot for the Wanhao D6/ Monoprice Ultimate printers thanks to the original files by 1bigpig. It can easily be assembled and taken apart. Also increased the size of the cutouts for hot end and nozzle.…
Case for the type 1 CURTA modeled according to the blueprints from 1950. There were 5mm thick 52mm and 17mm diameter rubber pads in the bottom and in the small receptible on top. Printed in CF-PETG, 0.25 mm nozzle and 0.15 mm layer height.
M39 to EOS M adapter. Printed in Carbon fiber PETG at 0.1 mm layer height and support under the FD mount extensions. Adapter height should be 10.8mm. Wet sand with 400 grid if required. Empiricus@Dremomys Category: Camera
I take the Mavic on long hikes and needed better protection from the elements so I made these cases for the Mavic Pro controller alone or with the controller for the Epson BT-300 glasses attached with this adapter:…
Enclosure for the PanelDue with 5 inch touch screen. Cable access from the side or bottom. 3x 6mm M3 3x 10mm M3 4x 12mm M3 1X 30mm M6 and nut 3x 25mm M4 and nuts Updated this with a hinged attachment part for moving the screen out of the…
Adapter Canon EOS M to Canon FD. Wet sand with 400 grid so that the two parts give you the right height of 24 mm if required. 3 12 mm M2 screws to hold he parts together. Printed in Carbon fiber PETG with 0.1mm layer height with support…
CURTA 'Loescherhebel'/ clearing lever. Modeled according to the original plans. Printed with a 0.25 mm nozzle at 0.1 mm layer height in carbon fiber PETG.
The Epson Moverio BT-300 controller will securely snap into these cradles. Two iterations, the longer version protects the cable attachment in the back of the Epson controller. I suspect this may be a point of cable breaks if you use a…
This a remix of thing:3037926 Filament holder w/integrated scale by dieki. Please see instructions there. Provides a readout of filament weight remaining in Octoprint. I integrated the weight sensor into a spool holder that turns on two…
Railcore II Y carriage for Dual extrusion using the Bondtech BMG-X2 EXTRUDER and E3D Chimera. 2x GDStime Technology 24V 0.1A 40mm blowers for cooling. I use a Omron E2B-M12KN08-WP-C1 2M inductive probe with this. Slight updates and all is…
Fill your Moka Express funnel reservoir with one swipe. Made this to get reproducible fill levels and because I am impatient. Insert the funnel, turn the top lever to the left and tap to fill the reservoir. Turn the lever back to the…
Replacement for Rhode Video Microphone Pro flash/tripod mount. Made this as the thin brittle metal mount on the Rhode VideoMic Pro breaks easily. This is probably by design to prevent damage to the mic or camera but annoying nevertheless.…
Enclosure for a super accurate Arduino GPS clock. Basic description and sketch here: learn.adafruit.com/arduino-clock/software?view=all I expanded this with a charger, Lipo, on/off switch and a touch toggle switch. The display is bright…
Added a funnel guide so that it is easier to load the filament without turning the printer around, a rim so that the halves lock better together and a bypass for flexible filaments. I had to bend the lever as shown and ad a little…
Another take on a drive block for the extruder of the Zortrax/Wanhao D6/Monoprice Ultimate clonage for flexible filaments. Version 2 has a very tight fit for the 10.8mm diameter, 38 tooth Robotdigg Filament drive gear 4 flat shaft for…
Cooler for the EKWB backplate for the EVGA 3090 FTW3 Ultra. Uses 5x60mm/1cm fans. 6mm M3 and 10mm M2.5 screws to hold things together. M2.5 12mm to screw it to the 3090. Do not use PLA as it gets soft at 60C. PETG (80C) or ABS (100C)…
This shroud is printed in two parts that slide together. Included is a M12x1mm nut for the proximity sensor. You also need to print two of the 5x6mm posts and remove a small bridge between the holding posts for the fan on the shroud. I…
I made this shade to allow better view of the projected image in bright sunlight and as a protection for the glasses. Insert the glasses from the back. I printed this top down or standing on the back which needs much more support. Printed…
Added a cable guide for the proximity sensor on the side of this excellent print head top that secures the main cable on the Wanhao D6/Monoprice Ultimate printer. Also doubled the snap-in guides on the clips. Empiricus@Dremomys Category:…
Designed an diopter adapter to the Leica 21mm Brightline metal finder. Used a Mamiya RB/RZ +3 diopter lens as I had one around. It has a good size and they sit in a soft plastic frame for easy removal. Printed in Carbon fiber PETG 0.1 mm…
Release button for the L-Grip Holder RZ for Mamiya RZ67 that always gets lost but is impossible to get. Empiricus@Dremomys Print Settings Printer Brand: Wanhao Printer: Duplicator 6 Rafts: No Supports: No Resolution: 0.150 mm Notes: ABS…
Adapters for the SEAC Unica Full Face Snorkeling Mask and Gibec 0124 Iso Gard HEPA Light filters - for testing only. Adding filters to these masks can be dangerous. There are four version with/without latch and/or o-ring. Please provide…
Robot M26 to EOS M adapter. Will fit the old and newer vintage lenses. Printed in Carbon fiber PETG at 0.1 mm layer height and support under the FD mount extensions. Adapter height should be 13 mm. Wet sand with 400 grid if required.…
Well, check your baseline. This will hold a Pi Zero and Pi camera with wide angle lens. More reference on https://www.therpf.com/ . Work in progress but this has a lot of space for additional circuits. Orient the pieces so that they print…
Diopter adapter to use the Nikon FM 19mm diopters on the Leica 21mm Brightline metal finder. Printed in Atomic filaments Carbon fiber PETG 0.1 mm layer hight for dimensional accuracy as this material has practically no shrinkage. Designed…
Cap for the Leica sun shade 12575 . The shade can be reversed on the 90mm and 135mm Tele-Elmarits but there is no cap to protect the lens. This will help there. Printed in PETG.
These are 21.25mm brackets to offset the servos to the correct distance with dampers in place and to get some additional dampening. Used 3D Printer Motor & Vibration Dampers that are 5.75mm in height. The long version has additional lugs…
Just a little shroud to cover the yellow caps on the EVGA Z690 classified board. Printed in Carbon fiber -PETG with a 0.25mm nozzle, 0.1 mm layer height.
More compact E3D Hemera mount for the Railcore. EBM-PAPST RLF35-8/14N 5cm blower and Omron E2B-M12KN08-WP-C1 2M probe. You have to turn around the Y-Rail to get 30x30 cm xy Support only around the opening for the blower. New blower shroud…
Just a mount for a Wyze camera. Can be mounted from the front as shown with metal plate glued in or on top of the side extrusions without metal plate inside. Prints without support. Changed the mount so that it is flush with the front…
Got tired of buying headphone cushion replacements. This is a mold for casting cushions from silicone or silicone foam. Made for some beats headphones with diameter of 70x65 mm when the cushion is removed. I used Smooth-On Dragon skin…
Cable guide for my railcore 2 build. Snaps into the front right bracket that is part of https://www.thingiverse.com/thing:3290533 . Empiricus@Dremomys Print Settings Printer: Railcore 300ZL Rafts: No Supports: Yes Resolution: 0.150mm…
Print head top for adding a inline Duet3D IR Laser filament sensor to the Railcore II Y carriage for E3D Titan Aero and Blower Shroud thing:3206498. Set a wide range of 2%-130% as even with one particular filament the measured distance…
Filament holder for Railcore 2 300ZL and some brackets. No support in the post required. Added brackets and base for left side holder. New right side base and support to better deal with 3.5kg rolls. Ad spool holder thing:2431785. This…
The IR probe was not leveling reliable with my PEI bed. I added an NPN Omron inductive probe I had around instead. Much better now. These probes have a working distance of 8mm in an M12 form factor, that is about 4mm for Al. Twice the…
This is a new Y carriage for the Railcore 2 to use the E3D Titan Aero extruder and a new blower shroud using the EBM-PAPST RLF35-8/14N 5cm blower. Also included is a mount and cover for an IR auto leveling sensor. Tested and working…
Some parts that maybe helpful as reference. These are used to reinforce the Z motor mounts included are some covers and a bracket to help setting the distance between the Z axis. Empiricus@Dremomys Print Settings Printer: Railcore II…
To wszystkie aktualnie dostępne wyniki.
