Liczymy pasujące modele…
Here is a whole set of hooks in different shapes and sizes. There are so many different ways in which a hook can be used and I hope you will find some that are to your liking. Approximate sizes of the different hooks are shown in the…
This space saving battery dispenser is designed to hold both AA and AAA batteries, 12 AA and 13 AAA. There is a Voronoi pattern on the sides of the magazine to make it easy to see how many batteries are left. The drawback of this design…
I wanted a bin where the label was easy to read even from the front. So I made these. Apart from the fact that the design of the label lip prevents other units from being stacked on top of the bins, the dimensions of the bins are in…
Use the Skadis T-nut to mount different accessories to the IKEA Skådis board. The accessory will be firmly attached to the board and will not come loose when used, as can happen with conventional hooks. Is the threaded T-nut strong…
The transverse flute is thought to be one of the oldest musical instruments. It was first made of bone or wood. Today, the simple models are usually made of plastic, and we can make them with a 3D printer. Although this is a simple flute,…
When I became interested in the honeycomb storage wall, I thought that the hooks that I had designed for the IKEA Skådis board could be used on the honeycomb wall as well, so with some redesigning of the hooks and a customised inserts, I…
This space saving battery dispenser for the honeycomb storage wall is designed to hold both AA and AAA batteries, 12 AA and 13 AAA. A hexagonal pattern on the sides of the magazine makes it easy to see how many batteries are left. A…
A simple but useful knife that can be kept here and there, in your backpack, bag, car, toolbox, desk drawer or wherever you need a small knife. When pushing the blade forwards or inwards, it is best to push the latch sideways, not…
This is a complete pack of T-nuts designed for the assembly of 2020 aluminium profiles. This pack contains a variety of T-nuts for different applications. There are T-nuts for different sizes of screws, and there are T-nuts with…
I needed some new hooks for my Skadis tool board and when I was designing the hooks I got carried away and ended up with a whole collection of different shapes and sizes. There are so many different ways to use a hook, and I hope you will…
This space-saving battery dispenser holds both AA and AAA batteries, 10 of each size. If you would like to have a version that is able to hold a little bit more batteries, you can find it here . There are holes in the sides of the…
Here are a number of bins for small parts for the honeycomb storage wall. The collection of bins are available in widths ranging from 40 mm to 200 mm and with bottom depths of 40 mm or 50 mm. Some of the bins have dividers to get multiple…
Here are some bins with a low front face for the honeycomb storage wall. The collection of bins are available in widths ranging from 80 mm to 200 mm and in bottom depths of 50 mm or 60 mm. Some of the bins have dividers to get multiple…
This is a cable clip that can be used in the corner between the wall and the roof overhang where it can be difficult to install with standard cable clips. I made a couple of variants of the cable clip, one for a 20 degree roof pitch, one…
Use the drop-in T-nuts to mount different accessories to the Festool workbench MFT. The accessory will be firmly attached to the workbench. I made two different versions of the T-nuts, one threaded for M3 to M6 and the other for a nut or…
This is a holder for metric drill bits from 1 to 10 mm in 0.5 mm steps. I have added a couple of extra holes for the narrower drill bits, I like to have some extra because I tend to lose them or they can break off from time to time. The…
This extra large battery dispenser is designed to hold both AA and AAA batteries, 20 AA and 23 AAA. I have also added a version that holds up to 16 AA and 18 AAA batteries. If you're looking for a smaller model that holds up to 12 AA and…
This is a new version of my space saving battery dispenser for Skadis. It is designed to hold both AA and AAA batteries, 12 AA and 13 AAA. There are holes in the sides of the magazine to make it easy to see how many batteries are left. A…
This is my version of the Gravitrax compatible baseplate with 6 exits and interchangeable insets as well as corner holes for height blocks - all for the construction of flexible tracks. To be able to use this building block, you need to…
This space saving battery dispenser for the multiboard is designed to hold both AA and AAA batteries, 12 AA and 13 AAA. A pattern on the sides of the magazine makes it easy to see how many batteries are left. A drawback of this design is…
This is a kit of brackets for making your own drawer organisers, suitable for organising drawers in the kitchen, office or workshop. The brackets are designed to be used with 3.5 mm plywood or 1/4" (6.35 mm) plywood. The height of the…
Easily sort your small parts into your Gridfinity bins. With this model you can place the sorting tray directly on top of your Gridfinity bins in your drawer or wherever you have them. Or you can also have the tray as a freestanding unit…
A Gridfinity frame for IKEA's Skådis board. The collection of Gridfinity frames is available in 12 sizes from 1x1 to 2x5 modules. The Gridfinity frame is mounted on the IKEA Skådis board by using T-nuts. Installation The Gridfinity frame…
This is a set of Gravitrax compatible 'standard' inserts. More of my models Click here if you are interested in seeing more of my models for Gravitrax Feedback is always a good thing. To encourage me or other designers to make more…
One of the cornerstones of the Gravitrax system is building at height. These columns are a flexible way to build the marble tracks in an efficient way. The advantage is that the columns together with the base plate are flexible and allow…
Here are two different spacers with 9.5° and 4.75° inclination for Gravitrax marble tracks. For the 9.5° sloped spacer block, the top track entry is 10mm higher than the bottom track entry. For the second spacer block with 4.75°…
A guitar neck radius gauge tool. The radiuses for this tool are 7", 7.25", 9.5", 10" and 12".
The assortment box is suitable for the storage of small parts. The boxes have been adapted to an old standard with a modular dimension of 45 x 45 mm. I have made these boxes to replace the old and worn out cardboard boxes that used to fit…
The collection of hex bit holders are available in 37 different sizes ranging from 1x1 up to 4x12 holes for hex bits. The hex bit holder is designed for good visibility and access and easy hex bit removal and insertion, so the holder is…
Screwdriver holder for IKEA's Skådis board. The holder is designed with an open slot. This allows easy removal and insertion of the screwdrivers. The length of the holders has been designed to allow them to be mounted side by side. The…
Here are a couple of Voronoi-patterned baskets that can be mounted on the IKEA Skådis board using T-nuts. The baskets are available in two sizes 80 x 50 mm and 120 x 40 mm. Installation The baskets is mounted on the Skadis board using a…
Here are three different holders for Allen L-keys in both metric and inch sizes as well as for the Torx L-key. The metric holder holds 9 Allen keys from 10mm to 1.5mm. The inch size Allen key holder holds 13 keys ranging from 3/8" to…
A tunnel spacer to be used together with my Gravitrax base tile . It adds 10mm to the height of the base plate and can be stacked with all types of Gravitrax building elements above. No support is required if printed upside down as…
LEGO compatible plates to display minifigures or small builds for IKEA's Skådis board. The collection of LEGO shelfs is available in 20 different sizes ranging from 1x2 up to 4x6 plates. For the LEGO pieces to fit well, there are small…
I have made a number of models of trays and shelves to be mounted on the IKEA Skådis board. The collection of models are available in widths ranging from 40 mm to 120 mm and in depths of 40 mm or 50 mm. Installation The trays and shelves…
This is a set of holders for drill bits. The drill bits holder is designed for good visibility and access and easy drill bit removal and insertion, so the holes are oversized by 0.5mm and the holder is tilted by 10 degrees. I have added a…
A caliper holder for Skadis boards. It is designed for an analogue caliper, specifically a C.E. Johansson caliper. Whether it will fit other calipers is an open question. Installation The caliper holder is mounted on the Skadis board…
This is a feed-through for your garden water tank. The feed-through requires a flat surface inside the tank. Make a 25 mm hole in the tank and fit an O-ring with an inner diameter of 25 mm on the feed-through. Push the feed-through…
This is a hooks rack with three to six hooks. The width of the hook racks is respectively 165, 220, 275, 330 mm, the hook spacing is 55 mm and the length of the hooks is 35 mm. Installation The hooks rack is screwed to the wall, so it has…
Find your Duplo bricks and start building high-level marble tracks. The Duplo blocks give us a different way of creating a little extra height on the marble track. With one block we get a height of 31 mm, with two blocks we get 50 mm and…
LEGO compatible plates to display several minifigures for IKEA's Skådis board. The LEGO shelf is 160 mm long, and if you want an even longer shelf, you can put several of them next to each other. For the LEGO pieces to fit well, there are…
Combined with Duplo blocks, the platforms allow you to build multi-level tracks. The track can be extended in the horizontal as well as the vertical direction. You can use these building blocks to create shelves, bridges or supports…
Here is a hook rack with six hooks that can be mounted onto the IKEA Skådis board. The hook rack is 120 mm wide, and if you need more hooks, several hook racks can be mounted next to each other. The hooks come in different sizes, with S…
This is a set of holders for hexagon sockets, both 1/4" and 3/8". The shelves that hold the sockets are tilted 15 degrees for easy access. I have made the pins for the sockets round, which has the advantage that it is a little bit easier…
Here are some Bins with a low front face to be mounted on the IKEA Skådis board with T-nuts. The collection of bins are available in widths ranging from 80 mm to 200 mm and in bottom depths of 50 mm or 60 mm. Some of the bins have…
The collection of hex drill bit holders are available in 12 different sizes ranging from 1x5 up to 2x12 holes for drill bits. The drill bit holder is designed for good visibility and access and easy drill bit removal and insertion, so the…
Here are some Bins for small parts to be mounted on the IKEA Skådis board with T-nuts. The collection of bins are available in widths ranging from 40 mm to 160 mm and in depths of 40 mm or 50 mm. Some of the bins have dividers to get…
This is my version of the AA to C battery adapter. I tested it with all the different types of batteries I had at home and it was perfect for most of them but for a couple of rechargeable ones it was a bit tight but still ok. I designed…
There are quite a few stackable boxes with a semi-open front, I wanted to make a variant based on the Gridfinity system. This Gridfinity box set is available in 1x2 (42x84), 2x2 (84x84mm) and 2x3 (84x126mm) modules and 3 different heights…
A hook in the shape of a moose to hang small items such as keys, cables or a cap. It is available in two versions, one that can be screwed on and the other that can be fixed with double-sided tape or glue. Printing and print settings In…
This is a holder for inch size drill bits from 1/16" to 15/32" in 1/32" steps. I have added a couple of extra holes for the narrower drill bits, I like to have some extra because I tend to lose them or they can break off from time to…
A simple bottle holder that makes it easy to reach the bottles from your IKEA Skådis board. The bottle holder is available in four different sizes (50 mm, 55 mm, 60 mm and 67 mm). Installation The bottle holder is mounted on the Skadis…
A document stand can be useful to help keep your documents upright and easy to read. I remembered seeing something similar to this model a few years ago, so I tried to recreate it from memory, and this is the result. Assembly Turn the…
This is a set of holders for pliers/cutters that can be mounted on the IKEA Skådis board with T-nut mounting. To meet different needs, the holders are available in five different depths: 12 (XS), 18 (S), 24 (M), 30 (L), and 36 mm (XL).…
I wanted to have a stable holder for my folding ruler and a spirit level for my Skadis board, so I made these holders. The holders come in three different depths: 17mm, which fits a folding ruler, 25mm, which fits a spirit level, and 21mm…
This is the spindle supports for the AMB (Kress) 1050 spindle on my cnc router. This design requires two M5x30 screws and nuts for the upper spindle support and one M6x40 screw and nut for the lower spindle support for the spindle…
I made this holder to hang my Makita cordless screwdrivers on the wall. However, the holder is designed so that screwdrivers of other brands also fit — I have tried this with my Bosch and AEG screwdrivers. Installation The holder is…
Skadis Pen Holder A modular pen holder designed for the Skadis pegboard. It consists of a main mounting body and a cuple of interchangeable inserts, each designed to hold multiple pens and keep them neatly organized and easily accessible.…
Skadis Tool Holder Set This set consists of multiple tool holders designed to mount directly onto a Skadis pegboard using T-nuts and screws, providing a secure and flexible storage solution. Each holder features an open shelf design with…
To wszystkie aktualnie dostępne wyniki.
