P
PrintablesKisssys
Paint Can Spout
Just another Paint can spout. Keeps paint out of the gutter and allows more controlled pouring. Cheers Kisssys Category: Hand Tools
- Pobrania
- 1889
- Polubienia
- 199
- Ocena
- 4,83
Wszystkie modele
Liczymy pasujące modele…
P
PrintablesKisssys
Dewalt Battery connector
Dewalt battery holder or adapter. You could use this just as a mountable holder or if you insert a .7 inch strip of .032 brass you can connect to the battery. A small compartment is made for a fuse, reverse voltage protection or what you…
- Pobrania
- 1132
- Polubienia
- 202
- Ocena
- 5
P
PrintablesKisssys
DJI O3 Air Unit Model
These are models to help design FPV frames and camera mounts for the DJI O3. Insert them in you drawings as a reference. Cheers Kisssys Category: R/C Vehicles
- Pobrania
- 634
- Polubienia
- 21
- Ocena
- 5
P
PrintablesKisssys
Thumb Brace for Arthritis
I've had arthritis in my left thumb for a couple of years and have been wearing a brace off an on depending on the pain and many times I just wear it at night which seems to help. I did a 3d scan of my left hand and created this in Fusion…
- Pobrania
- 529
- Polubienia
- 127
- Ocena
- 5
P
PrintablesKisssys
Harbor Freight Ultrasonic Cleaner Basket
Edit: Added full basket 9/9/2020 lhas not been printed, drop me a message if it's good. I goofed up my parts basket so I made a new one for my Harbor Freight Ultrasonic Cleaner. Part shown in use about 18:00 into the video. Fusion360…
- Pobrania
- 388
- Polubienia
- 53
- Ocena
- 4,5
P
PrintablesKisssys
PEX Staple
I ran some PEX tubing from my shop to my office to supply air pressure. Mine is regulated to 30psi but their are a number of people on Youtube using air at full pressure, you can decide, if you do these are handy to hold the PEX in place.…
- Pobrania
- 347
- Polubienia
- 42
- Ocena
- 5
P
PrintablesKisssys
Parametric Project Case in Fusion360
The Stl files are for a 2x3x1 box but the Fusion360 design is linked and is Parametric so it's easy to make the size you need. Look at the video starting about 10:10 to see how easy it can be made to the size you need with Fusion. Uses…
- Pobrania
- 309
- Polubienia
- 19
- Ocena
- 0
P
PrintablesKisssys
Toy Train Track 40mm
I made a raised Train Track for my Grandson's 40mm train track. I've printed the bridge parts but not the track. Make 4 Bridge Bottom supports and CA to the corners of the Bride half to keep the slope tracks from slipping through Cheers…
- Pobrania
- 282
- Polubienia
- 44
- Ocena
- 5
P
PrintablesKisssys
Fire HD 8 tablet case
This is a cover for the Amazon Fire HD8 tablet. It should be printed in a soft material if protection is your primary goal. I printed mine in PETG because I just wanted to make it easier to hold. It only fits the fire with these…
- Pobrania
- 272
- Polubienia
- 15
- Ocena
- 5
P
PrintablesKisssys
2.4 ghz 12 element Yagi Quick build
I need a little Wifi Yagi every once in a while so I thought I would make a 3d printed quick build antenna. While I was drawing it I thought I'd include a means to automatically measure the elements as I assemble it. Well then I of course…
- Pobrania
- 203
- Polubienia
- 30
- Ocena
- 5
P
PrintablesKisssys
SMA wrench
Simple SMA wrench to put on your sma connectors and leave for easy attachment and removal. Printed 100 percent PETG Cheers Kisssys Category: Electronics
- Pobrania
- 175
- Polubienia
- 20
- Ocena
- 5
P
PrintablesKisssys
JR module case
Keeping my JR radio's that accept a frequency module was the smartest thing I have ever done. I have been able to use my radio's on the Ham bands and many other formats that are available. I'm building a submarine for my pool and I found…
- Pobrania
- 171
- Polubienia
- 3
- Ocena
- 0
P
PrintablesKisssys
Cake Knives
I made these Wedding cake knive drawings last year and made them on my wood router. I did print one scaled down a little in abs and it looked so I nice I've kept in the office to admire. Hope someone else might find them useful. They need…
- Pobrania
- 147
- Polubienia
- 18
- Ocena
- 5
P
PrintablesKisssys
Dewalt NMHD to Lipo converter
I have 2 old Ni MH batteries for my Dewalt DC970 drill that are on their last days and the drill is working perfectly but is at least 10 years old. I'll buy another Dewalt when I need it but in the mean time I'm going to plug in my Bauer…
- Pobrania
- 147
- Polubienia
- 13
- Ocena
- 0
P
PrintablesKisssys
4 Inch Gothic Post Cap
One of my plastic fence post caps has seen better days so I did a quick drawing and printed it up. The cap was printed separately so it prints perfectly with no support. Cheers Kisssys Can you believe they actually put the Thingivese…
- Pobrania
- 124
- Polubienia
- 25
- Ocena
- 0
P
PrintablesKisssys
Solar Panel Post Mount
I needed a quick mount for a ALLPOWERS 2.5W 5V/500mAh Solar Cell Panel to mount on top of a post. https://www.amazon.com/gp/product/B074TYH68Z/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 I taped around the edge of the solar panel and…
- Pobrania
- 122
- Polubienia
- 25
- Ocena
- 0
P
PrintablesKisssys
Jar Opener
Getting old and my hands don't work as well as they did. This gives me the leverage to open up jars with lids up to a 3.5 inch or 90mm diameter. Put 2ea 4 inch jig saw blades in the grooves with the barbs facing the inside. CA in place.…
- Pobrania
- 119
- Polubienia
- 23
- Ocena
- 5
P
PrintablesKisssys
Peristaltic pump
This peristaltic pump has been made as small as possible to inject small quatities of test solution on command. It has been tested with this tubing.…
- Pobrania
- 118
- Polubienia
- 35
- Ocena
- 0
P
PrintablesKisssys
Harbor Freight 5 to 4 inch Vacuum Adapter
My original adapter broke so I made this up to adapt the 5 inch input of my Central Machinery vacuum to the 4 inch hose I have. Hope it's of use to some one. Cheers Kisssys Category: Parts
- Pobrania
- 116
- Polubienia
- 18
- Ocena
- 0
P
PrintablesKisssys
Belt rack
Some of the new popular belts don't have a buckle with which to hand them up easily. I made this to allow hanging both kinds of belts. It holds up to 5 belts. Cheers Kisssys Category: Organization
- Pobrania
- 115
- Polubienia
- 16
- Ocena
- 5
P
PrintablesKisssys
Morse 2 tool holder
Wall MT2 holder Note: This was save in the inch format by mistake so scale it to mm. I can't find the drawing file I did. Cheers Kisssys Category: Machine Tools
- Pobrania
- 104
- Polubienia
- 11
- Ocena
- 0
P
PrintablesKisssys
Mini Lathe Quick Change Tool Post Holder
Tool holder for Mini Lathe Quick Change Tool Post. https://www.amazon.com/gp/product/B071LDWTVQ/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 Print Settings Printer Brand: Prusa Printer: I3 MK3S Category: Machine Tools
- Pobrania
- 102
- Polubienia
- 12
- Ocena
- 0
P
PrintablesKisssys
Sunfounder 10 inch screen
I needed a case for my Pi 4 and my Sunfounder 10 screen. I designed a model of the screen which I used for design. Its included for use in your own desing. I used it to create a switch assembly to move the switch motion to the front. I…
- Pobrania
- 101
- Polubienia
- 9
- Ocena
- 0
P
PrintablesKisssys
Basket for Harbor Freight Ultrasonic Cleaner
I extended up the sides of my Harbor Freight basket and it turned out so nice my wife put fruit in it. It was printed in PETG which may be food safe and it is quite strong. I did a diamond shape on the sides so only the handle area's will…
- Pobrania
- 95
- Polubienia
- 22
- Ocena
- 0
P
PrintablesKisssys
Pentair Chlorinator Cap
My Pentair Chlorinator cap always takes a board between the tabs to get it open. I decided to print a cap that I can mount a 1 1/2 inch board that will give me the torque needed to take it on and off. I used to have to replace the O-rings…
- Pobrania
- 89
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKisssys
Tungsten Grinder
Simple 3 piece adapter for Dremel tool. Works with my Dremel 10.8 and my 3220. I printed them solid but only the backup wheel probably needs to be. The backup wheel needs to be a good print or you may find it vibrates or is out of…
- Pobrania
- 82
- Polubienia
- 18
- Ocena
- 0
P
PrintablesKisssys
Paint Can Spout
I usually buy one of these at Walmart for a few dollars but they were out the other day so I printed this and glued it to my paint can lid with silicon glue. I an using it with solvent based paint so I am careful to keep the cap threads…
- Pobrania
- 75
- Polubienia
- 38
- Ocena
- 0
P
PrintablesKisssys
Nextion NX3224T028_11 Project Box
This is a case I use for Teensy and ESP32 development board projects. It is designed for a Nextion NX3224T028_11 TFT screen. It uses my Parametric box creation with some added barriers and holes to allow simple placement of a ESP or…
- Pobrania
- 70
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKisssys
Chamberlain Garage door shield
I just changed from a 20 year old Genie to a new Chamberlain B750 with a quiet belt drive so here comes a new shield design. I looked around and didn't see any commercial units that I couldn't think of a way to get around so I made my…
- Pobrania
- 68
- Polubienia
- 16
- Ocena
- 5
P
PrintablesKisssys
18650 Battery holder with reverse voltage protection
Yet another 18650 battery holder. I think I could find one good enough, the ones by enif are very popular but I worry about the plastic as a spring if it gets hot. I only use stranded wire so wrapping it as a connector would be a pain…
- Pobrania
- 68
- Polubienia
- 11
- Ocena
- 0
P
PrintablesKisssys
Lathe RPM meter
I've had this popular RPM meter sitting in my project bin for over a year so I decided to mount it today. I see a number of youtube video's displaying how to wire it up so I won't go their other than a quick schematic I've included.…
- Pobrania
- 64
- Polubienia
- 17
- Ocena
- 0
P
PrintablesKisssys
Yeti 10 ounce cup holder car adpater
My wife loves her YETI Rambler 10oz but it didn't fit the Lexus 350 cup holder so I made this little adapter that provides a 3 1/2 inch shelf that supports the little thermos. The base is open so you can put normal cups their when the…
- Pobrania
- 63
- Polubienia
- 8
- Ocena
- 0
P
PrintablesKisssys
D-Line Outlet Cover
This is an outlet cover that goes direct to D-line Cord cover https://www.amazon.com/s?k=d-line+cable+raceway&crid=30ZVP0WTYYR5L&sprefix=D-line%2Caps%2C179&ref=nb_sb_ss_ts-a-p_3_6 Enjoy KIsssys Print Settings Printer Brand: Prusa Printer:…
- Pobrania
- 60
- Polubienia
- 16
- Ocena
- 0
P
PrintablesKisssys
Pick and Place Bottom Camera
Thought I would share my bottom camera mount for my PNP machine. It uses the standard USB camera that is common to Open PNP. I use 30mm 3mm x .5 bolts that self tap to the bottom arms. A nut is installed and locked in place to allow the…
- Pobrania
- 55
- Polubienia
- 10
- Ocena
- 0
P
PrintablesKisssys
XH-M240 Battery Capacity Tester
Simple base for Banggood XH-M240 18640 battery tester Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG Category: Electronics
- Pobrania
- 54
- Polubienia
- 2
- Ocena
- 0
P
PrintablesKisssys
Hobby Lathe Digital Readout
I needed to create a v-belt pulley on my Jet BD920 hobby lathe and my old eyes had trouble stepping over 2.34 mm 6 times with a scribed mark so I did a quick 3D print. If you have this lathe then the pictures should make it clear how to…
- Pobrania
- 51
- Polubienia
- 15
- Ocena
- 0
P
PrintablesKisssys
Gear motor adaptation for White Board Magnetic Marble Lift
The Marble lift by bamoore01 is just outstanding. The parts print perfectly without support, you may need some added brim to give the tall pieces more contact area to hold. I've have over a hundred designs on Thingiverse and few match up…
- Pobrania
- 43
- Polubienia
- 11
- Ocena
- 0
P
PrintablesKisssys
Tig Primeweld slider control
I've been playing with handheld tig current controls. This is my third version and I'm pleased with how it works. Uses inexpensive pots and switches and may be worth building for light welding use. It's made of PETG plastic so it can…
- Pobrania
- 39
- Polubienia
- 18
- Ocena
- 0
P
PrintablesKisssys
Geekcreit® XH-M229 base
Simple base for Geekcreit® XH-M229 pc power supply breakout board. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG Category: Electronics
- Pobrania
- 38
- Polubienia
- 4
- Ocena
- 5
P
PrintablesKisssys
Wheel for Radio Flyer Wagon
My wife loves this modern version of a Radio Flyer. The white wheels have turned to brittle mush. When one broke I replaced it with this wheel. You make 2 pieces and glue them together with Duco cement. Fusion360 files shared below.…
- Pobrania
- 36
- Polubienia
- 3
- Ocena
- 5
P
PrintablesKisssys
Handwheel Pulse Encoder Dual Axis
This is a dual Hand Wheel holder for 2 rotary encoders. https://www.amazon.com/dp/B07K254YCG?psc=1&ref=ppx_yo2ov_dt_b_product_details I added 3 more screws in the actually STL files to better secure it. The pictures are of my test print.…
- Pobrania
- 36
- Polubienia
- 5
- Ocena
- 0
P
PrintablesKisssys
Pick and Place Juki Nozzle Holer
4 slot Juki nozzle holder for Pick and Place machine. Print slots up no support. Category: Tools
- Pobrania
- 35
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKisssys
Bulldozer toy
My 4 year old nephew said he wanted me to make him a bulldozer. Had to make a second one to keep his little sister happy. It uses Lego wheels and tracks. https://www.amazon.com/dp/B00YBERL4E?psc=1&ref=ppx_yo2ov_dt_b_product_details I…
- Pobrania
- 35
- Polubienia
- 19
- Ocena
- 0
P
PrintablesKisssys
Standard light socket to 2 wire adapter
I broke a base off of a Sylvania LED light and thought I surely can make something out of it. So I made aN adapter that will screw into it to make a simple adapter to take power from a standard lamp socket. Well it's not UL approved of…
- Pobrania
- 30
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKisssys
Polaris Feed Hose Nut
I couldn't find where I place a couple of Polaris Feed Hose Nuts and had to make a couple. Cheers Kisssys Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Replacement Parts
- Pobrania
- 29
- Polubienia
- 2
- Ocena
- 0
P
PrintablesKisssys
Drill Press Laser Centering Device
The laser cross hairs on my old Sears drill press stopped working so I thought I'd try to build a laser centering device I believe was invented by Dan Gelbart. A search for laser centering device should pull up a couple of video's of it…
- Pobrania
- 29
- Polubienia
- 6
- Ocena
- 0
P
PrintablesKisssys
Chipquick SMDLTLFP 982A adapter
I needed an adapter today for a 10ml Syringe and for a 5cc 15g Chipquick Solder paste syringe. These both seemed to work out well. I drilled out the hole to get a tight fit on 3/16 brass tubing as the air connection to the 982A. I doubt a…
- Pobrania
- 29
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKisssys
Pen Knife Grip and Safety Cap
I must have a half dozen #1 Exacto knives laying around and all of them seem to lack the ability to keep the blade tight. I'm guessing the collet holder has expanded over time and just can't pull the collet tight. It would also be nice to…
- Pobrania
- 27
- Polubienia
- 8
- Ocena
- 0
P
PrintablesKisssys
Enclosure for ESP-WROVER-KIT
The ESP WROVER development kit is a great board to have around. It has a good color LCD screen, built in debugger and sells for less than $40 usd. I made a case to house my gateway to my MQTT network. The front panel is square so you can…
- Pobrania
- 27
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKisssys
Water Valve RC controlled
I have a lot of fun chasing the kids with my micro drone and squirting them with water. This is the assembly I made using some IV components, surgical tubing and a micro RC servo. The surgical tubing is filled with about 30ml of water…
- Pobrania
- 26
- Polubienia
- 6
- Ocena
- 0
P
PrintablesKisssys
Tesla Model 3 Toyoto emblem
Made this as a joke for my buddies Tesla. You can stick it over the "T" to hide the Tesla insignia with or without the background. Hide the T alltogether or make it look like a poor attempt to hide it. Put some ratty duck tape over the…
- Pobrania
- 23
- Polubienia
- 2
- Ocena
- 0
P
PrintablesKisssys
Switch Assembly
This is a switch assembly that I use for a CNC pendant. I've posted this separately to make it easier to obtain for your project. I used 4 MXRS micro-switches, 2 9657k651 springs from www.mcmaster.com, and a 3mm x 5. The switches are…
- Pobrania
- 22
- Polubienia
- 6
- Ocena
- 0
P
PrintablesKisssys
3d Printer Filament Scale
Welcome to my Filament Scale project. I have had this mounted to my Taz5 for over a year and have been quite happy with its operation and accuracy. There will be some error because of the pulling of the filament but it gives me a good…
- Pobrania
- 21
- Polubienia
- 7
- Ocena
- 0
P
PrintablesKisssys
Trumpit
Don't go to a rally without your own personal Stupid Trumpit. Uses a simple audio board with some audio in the zip file to try out or record your own. The switch is 6mm pushbutton switch that is pressed in to the holder and wires are…
- Pobrania
- 20
- Polubienia
- 3
- Ocena
- 0
P
PrintablesKisssys
Polaris 180 Wheel Adapter to Ceramic 608 Bearings
This is a kit to use the Polaris 180 wheel with ceramic 608 bearings. The bearings last longer and the Plastic screw that breaks off is replaced with a 10-24 1.5 in stainless screw. Requires you to print a new bracket to hold the wheel.…
- Pobrania
- 20
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKisssys
Taz5 Tools
Edit. Added my ztool for leveling. I've had my TAZ5 for about 2 weeks and these are the gadgets I have made to help get it working properly. I'm NOOB to 3D printing but a old hand at g-code with CNC routers, mills and plasma cutting so…
- Pobrania
- 20
- Polubienia
- 6
- Ocena
- 0
P
PrintablesKisssys
Bambulab Desicant holder
It was time to replace the desicant in my Bambulab P1P. I always use Dry & Dry desicant when I need desicant so I made a easily refillable holder for my P1P. You can use the original cover and attach it to the base with a 1.7x5 mm screw…
- Pobrania
- 19
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKisssys
Time Wise 825 Speedometer generic mount
Created a mount for the Timewise 825 speedometer. Print solid in high temp plastic like ABS since it may be in the sunlight. Top pivots on a 1/8 inch shaft. The knob rotates on a 1/4 inch shaft that is tapped almost all the way through…
- Pobrania
- 19
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKisssys
Mini3 Drop
I have been wanting to drop small skydivers from my Mini3 Pro drone. I first added a XIAO ESP32C3 board with a RC servo and used the vertical position of the camera to trigger the servo and drop the object. It worked well but found I had…
- Pobrania
- 18
- Polubienia
- 3
- Ocena
- 0
P
PrintablesKisssys
Box for Lolin ESP32 with OLED
This is part of a bigger project but I thought the case may be of use to anyone who might want to build something using the Lolin ESP32 Oled board. The board mounts with 2mm screws self tapping to bottom of the box. The mounting back is…
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
PrintablesKisssys
Eflite EFL propguards Xvert
Well I don't need them yet but had a little time to make the propguards. Printing separately creates the strongest elements. Print out the PDF of the layout and tape the hoop and the Assembly stand in place. Tact the arms to the hoop…
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 5
P
PrintablesKisssys
Tormach TTS tool tightener
This is a Tormach tool tightening system that mounts to the table. It uses 2 one way needle bearings, one to tighten and one to loosen the collet nut. This is not really a 3D printed project except for the bearing cover. The Fusion360…
- Pobrania
- 18
- Polubienia
- 3
- Ocena
- 0
P
PrintablesKisssys
Squirrelinator Daylight Door Newer version available
This would be good if scaled up for a automated pet door. Wifi and bluetooth are available on the board. You could easily set up a message to your phone are Nodered to notify of movement. I've had a Squirrelinator trap for about 6 months…
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
PrintablesKisssys
AutoEC Motor Model
This is a model of the AutoEC Gear motor sold as a set of 4 on Amazon . The Fusion file is here. https://a360.co/39YoNzY This is uploaded to aid in the design of projects that make use of this motor. Cheers Kisssys Print Settings Printer…
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
P
PrintablesKisssys
Garage Shield for Genie pre 2012
If you don't know how easy it is to open a garage door with a typical garage door opener you need to google it. This shield only works on older Genie doors so look at the stl and Fusion360 drawings to make sure it's suitable for your…
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
P
PrintablesKisssys
GoPro3 Tripod mount
Another GoPro3 mount. This one fits on my Tripod from Butterfly Photo purchased through Amazon . I also printed a lense guard that keeps the wide angle lense from being scratched if it's layed down on its face. Fusion360 files shared…
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKisssys
X-Vert Wing Tip/Landing Gear Replacement
I lost one of the Tip Landing gear for my Eflite X-vert so made a spare. I'd print both so you have a balanced pair. Cheers Kisssys Category: R/C Vehicles
- Pobrania
- 16
- Polubienia
- 5
- Ocena
- 0
P
PrintablesKisssys
Haunyang VFD Cover Spindle Lights
I upgraded my Router to a Chinese spindle. The cover that is provided wasn't flat on the front to mount a Pot or switches so I made a replacement and also made LED light rings for a 60mm air cooled spindle and a 72mm ring for a water…
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 0
P
PrintablesKisssys
Tormach Tool System
Holder for Tormach TTS tools. Fusion360 files shared below. Tormach TTS holder http://a360.co/2wjMnmK Print Settings Printer Brand: LulzBot Printer: TAZ 5 Rafts: Doesn't Matter Supports: No Resolution: .2 Infill: 30 Custom Section…
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 0
P
PrintablesKisssys
Titan Capspray spray gun cap
Printed 100% and Prusa .1 quality for strength and accuracy.
- Pobrania
- 16
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKisssys
Magnetic Parts pickup with quick drop
I have a big one of these I made with a large Magnetron magnet but it just won't fit in small places so I made a smaller one. I ordered these Magnets from Amazon .…
- Pobrania
- 15
- Polubienia
- 5
- Ocena
- 0
P
PrintablesKisssys
Pentar 320 Wrench
Sometimes the Pentair Chlorinator cap can be difficult to remove, especially if the oring is old or dirt in the cap threads. This gives you a lot more leverage and can be silicon glued in place to keep it handy. Cheers Kisssys Category:…
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKisssys
AFA reamer tool holder
I bought these reamers from Amazon the other day and was very impressed so I made a simple holder for the set. https://www.amazon.com/dp/B08SLBT6SJ?ref=ppx_yo2ov_dt_b_fed_asin_title Cheers Kisssys Category: Machine Tools
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
PrintablesKisssys
Prusa Mk3 Dry Spool Holder
note: I've been using this quite a while and it works great. I also found that the fan is not necessary at all, just the desiccant works perfect. In my environment I just drain out the desiccant once a month, dry it per manufacturers…
- Pobrania
- 13
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKisssys
Polaris Bag Quick Disconnect Version 2
This is version 2. The previous version would come undone if the bag got to heavy. This has more strength in the right direction but allows it to pop off easily if pulled up. Polaris bag quick disconnect. Glue in 8x3mm magnets hook to…
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKisssys
Polaris 180 Cover
My Polaris 180 started to fall apart so I designed a simple cover to replace it. It prints with the tops down with very little support material. Just CA them together, it prints on a 250 x 250 bed. I've replaced a lot of parts on my…
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
PrintablesKisssys
Coke Can Oil Keeper
I keep oil and an acid brush in a soda can to provide occasional lubrication. This is a simple wall mount. Category: Machine Tools
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKisssys
Simple tool to adjust IP camera lenses
Grips 15mm lens without touching optics.
- Pobrania
- 12
- Polubienia
- 5
- Ocena
- 0
P
PrintablesKisssys
Wireless charger stand
I have an old Samsung J7 that didn't come with a wireless charging receiver built it. I added a Qi wireless charging pad and use a Choetech T511-S charger. It has been great to not have to plug that little micro usb connector in all the…
- Pobrania
- 12
- Polubienia
- 2
- Ocena
- 0
P
PrintablesKisssys
Canon EOS 2S lipo holder
I often need a battery to power my electronic projects. I have used large power tool battery's and they work great but for a small toy I needed something smaller, safe to handle and come with a good charger. I found the Canon EOS 2 cell…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKisssys
Tormach PCNC1100 spindle lock
I made this spindle lock for my Tormach PCNC1100 but haven't had a chance to use it for broaching. Ended up printing a plastic part and when it fails I'll probably try it out. Yes it's plastic but it seemed pretty strong, I wouldn't think…
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
PrintablesKisssys
Paint Pouring Cap
Paint can pour spout cover. Category: Hand Tools
- Pobrania
- 11
- Polubienia
- 3
- Ocena
- 0
P
PrintablesKisssys
Squirrelinator Trap Latch Gate
This is a simpler version of the Squirrelinator Daylight Door which I posted earlier this year. It is much easier to make and should be very reliable. It also allows the electronics to be removed easily and replaced it you need to wash…
- Pobrania
- 11
- Polubienia
- 6
- Ocena
- 0
P
PrintablesKisssys
Selectable Label
I don't always use all the chemicals in my sprayer so I made a Marker that can select 6 different positions. I mark with a magic marker the current liquid. Keeps me from using Roundup on my wife's flowers. Tighten the self tapping 3mm…
- Pobrania
- 11
- Polubienia
- 3
- Ocena
- 0
P
PrintablesKisssys
Lulzbot Taz5 wiper holder
I created this wiper strip holder for the right side of my Taz5 printer. The printer allows the head to go off the right side of the bed enough that you could wipe you head. As soon as I made this I decided to use a different method to…
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKisssys
Polaris Bag Old version
My bag Velcro always wears out so I took a couple of 8x3mm magnets and made a quick disconnect. Just snaps on 19mm hose and hook the bag Velcro through the provided slot. If it doesn't stay secure to the hose there is a slot for a zip tie…
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKisssys
GreatRace Clock mount
This is a simple mount for a Great Race Clock. It has a slight tilt to the rear to match the slope of the vehicle it was used on but should still be usable in most situations. The holes in the back allow the clock to slide down and self…
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKisssys
IP Camera mount for TAZ5
This mounts my Wansview Home camera on my Taz so I can check on it's progress. I made the top lip separate to make printing easier. Fusion360 files shared below. IP Camera http://a360.co/2xzkJ3S Print Settings Printer Brand: LulzBot…
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKisssys
Echo Weedeater Spool Holder
This is designed to hold a spare EchoMatic Pro P022006770 Trimmer Head Spool on my weedeater. It uses a universal mount that attaches to the 1 inch or 25mm rod with 2ea 1-1/2 inch 8-32 machine screws. The Spool holder is CA'd to the mount…
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKisssys
Leveling tool for X axis
This is a simple fixed length tool to set the height of both Z screws on a Taz5 printer. Print anyway you want not critical. If you need something taller or shorter you could just adjust the Z scale. Watch the short video on how it's…
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKisssys
Lulzbot Taz5 wiper holder
I created this wiper strip holder for the right side of my Taz5 printer. The printer allows the head to go off the right side of the bed enough that you could wipe you head. As soon as I made this I decided to use a different method to…
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKisssys
3d Filament Moisture monitor
I have been storing my filament in 5 gallon buckets for a few years now and I always replace the dessicant packets every once in a while to keep things dry. This will eventually be attached to my Red node server but it's just a simple…
- Pobrania
- 7
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKisssys
Echo Weedeater Bump spool
I designed a mount to carry a spare spool on my Weed Wacker and even gave a shot at making the spool. Split the spool into 3 pieces to make it easy to print. Probably not practical to make, I see them for less than $10 on ebay but mine…
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKisssys
Taz5 Heater Blanket Head Clone
I thought I would see how much an insulated head would effect the heating of my Taz5 Hexhead. I couldn't really tell much improvement in heating from room temp to 240C. I did notice about a 10 percent reduction in the rate of cooling. If…
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKisssys
Pendant with Attitude
I made this pendant for my Tormach a while back and just hadn't had time to make a video that show's it working. Anyway take a quick look at the video and see if reading on is worthwhile. Pendant with Attitude…
- Pobrania
- 5
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKisssys
Polaris 180 bag adapers
I still use an old 180 Polaris pool cleaner and have used a 180 bag attached to my 180QuickRelease adapter to take it on and off. I have had trouble finding cheap 180 bags so I've used a 280 bag tie strapped to my adapter. I decided to…
- Pobrania
- 5
- Polubienia
- 2
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.