Wyniki wyszukiwania: 15m

Sortowanie

1022 modeli

P
PrintablesJake Reeves

Perforated Sink Sponge Holder(s) - Single + Double Sided (15mm or 20mm Pinch)

After looking through a few different models online, I decided to create my own sink sponge holder and include some perforated holes that allow any water to easily drain away from the sponge - preventing moisture build-up . This was…

Wydruk około 2,62 €–3,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1078
Polubienia
131
Ocena
4,92
P
PrintablesJayfeather

Small Waffle (100x100x15mm)

A 50 gram 10x10x1.5 cm waffle with 36 holes. Takes 3 hours to print on ender 3. Print settings no supports

Wydruk około 3,18 €–3,88 € nettoWstępna wycena jednego wariantu

Pobrania
121
Polubienia
10
Ocena
4,67
P
PrintablesObe_Design

PVC pipe holder 15mm - 20mm

These are 3D-printed PVC pipe mounts, designed to be secured with M3 bolts. They are commonly used in electrical conduit installations and are available in different sizes to fit various pipe diameters. Perfect for mounting pipes to walls…

Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu

Pobrania
118
Polubienia
26
Ocena
5

Buckle Webbing Adjuster 15mm

Print Settings: -PLA +/PETG -80% Infill -Mostly <1.5 grams per item I used Ender 3 V2 to print this item. Thank you

Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu

Pobrania
98
Polubienia
9
Ocena
0
P
PrintablesThunderhead

250mm x 200mm x 15mm (WxDxH) Parts Tray 2

Parts tray to keep small parts organized

Wydruk około 8,43 €–10,31 € nettoWstępna wycena jednego wariantu

Pobrania
25
Polubienia
1
Ocena
0
P
PrintablesJeroen3

PrintDry 15mm pipe end

Buy some 15mm OD copper pipe and cut this at 27cm Hammer in these ends, ensure the angle is the same! (use plastic hammer) And it fits just like the original short bars. I recommend to print with HT-PET, solid, with 3 perimeters.

Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
15
Polubienia
1
Ocena
0
P
PrintablesBurns3D

15mL Conical tube adapter for Sony Cell Sorter

A tube adapter for the Sony FX500 Cell sorter. Should also fit the MA900 and SH800. Made when some of the adapters when some of them when missing. Printed on standard PLA settings for the MK3s+ printer, no supports. Print each part on the…

Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu

Pobrania
14
Polubienia
2
Ocena
0
P
PrintablesJernejP.

Bed scraper - fast print 15min - minimal filament usage 3g

Print in PLA so you dont damage the printbed. Check out the new larger model at: https://www.printables.com/model/291609-bed-scraper-mk2-8g-25min Still uses only 8g and prints in 25min. Print instructions Click print =)

Pobrania
39 451
Polubienia
3967
Ocena
4,78
P
PrintablesVomDeich

Corner Clamp 90deg 5-15mm

This design supports material from 5-15mm thickness. The clamps are more easy to handle than angles with seperate clamps, but will only support joints of equal thickness material. Concept is based on idea of takuwoodcraft / TWCDesign.…

Pobrania
3458
Polubienia
1833
Ocena
5
P
PrintablesAndreas W

KUNA laptop stand with 15mm clearance

I printed a set of these but found them to not fit my Razer Blade laptop and also being a bit large. The angle the laptop gets with the original stand made it uncomfortable using the keyboard, I just wanted a very slight lift to help with…

Pobrania
3038
Polubienia
347
Ocena
4,84
P
PrintablesChiprobot

The Mistyfier - V3.0 Clean Bike Chain Luber (Update inc. 15mm Gap version)

This attachment enables a spray can to spray a stream of Oil/Wax or Brake-fluid directly and only to the chain (i.e. avoiding overspray onto bike frame , tires and disk rotors) , less mess, less waste and more time to ride…….. I am blown…

Pobrania
2985
Polubienia
1277
Ocena
5
P
PrintablesStranula

Multiboard Corners 45° & 90°, 6.25, 8, 12.5 & 15mm

I have an insider corner above my workbench where I am putting up a multiboard. I couldn't make any of the premade brackets work for my needs, so I made my own. These are working for me and can be seen in the attached images Updated…

Pobrania
2288
Polubienia
329
Ocena
4,9
P
Printablesquibeck

tripple toothpic crossbow shotgun (+15m range )

Print-in-place toothpick crossbow with compliant mechanism. No assembly, fits 3 spare toothpicks, 15m+ range! Mini Toothpick Crossbow – Print-in-Place Compliant Mechanism (+15m Range!) This is a compact, incredibly fun, and functional…

Pobrania
2109
Polubienia
427
Ocena
2
P
PrintablesLeapTechOnline

Pipe Lagging Insulation - Template Jig - Cutter - 15mm 22mm 28mm

A set of simple tried and tested pipe insulation cutting templates. I was sick of doing it by eye and then noticed people selling similar online but they were either overpriced or a bit "janky". I spent a fair bit of time sorting these…

Pobrania
1871
Polubienia
642
Ocena
5
P
PrintablesFelix Wiseman

1×5.25" Optical Disk Drive Bay to 4×2.5" up to 15mm thick

This print is a conversion from now mostly useless optical drive bays (discs/DVD/CD bays), AKA 5.25" drives. The adapter will fit up to 4 2.5" drives instead and can fit all standard formats (so each of the 7mm, 9.5mm, and 15mm thick…

Pobrania
1662
Polubienia
194
Ocena
5
P
Printablesprntmkr

Prusa MK4s Print Bed Cleaner - only 15mins!

Intro Sometimes a print may leave little marks on your print bed - some of these marks are hard to remove even if you use a print bed scraper. This print bed cleaner will easy the removal of all those annoying marks. Why you'll love it?…

Pobrania
1195
Polubienia
154
Ocena
4,94
P
PrintablesElitail

Ikea Skadis Hook 115mm

To be printed on its side If you will print this model, please post a make. Thanks! P.S. Thinner remix exist to fit US Skadis: https://www.printables.com/model/975385-skadis-hook-115mm-na-skadis

Pobrania
1110
Polubienia
155
Ocena
4,82
P
PrintablesBeo666

Linealanschlag für Metalllineale (15mm x 1mm)

Dieser Anschlag ist für Metalllineale mit den Maßen 15mm x 1mm (Breite / Dicke) konstruiert. Er lässt sich problemlos drucken, keine Stützen etc. Es wird auch kein zusätzliches Zubehör benötigt. Weitere Größen sind unter meinem Profil zu…

Pobrania
1055
Polubienia
414
Ocena
5
P
PrintablesMike Rainbow

Bosch 115mm angle grinder drill bit sharpener attachment

Ive designed something to clamp over the existing guard on a bosch 115mm angle grinder then clamp your angle grinder to a bench to sharpen 12mm, 10mm, 8mm, 6mm, 5mm, 4mm drill bits 2x 90mm 8mm bolts & nuts required. mine are my usual CF…

Pobrania
1026
Polubienia
149
Ocena
5
P
PrintablesIzzy0wlPrints

15mm Crochet Hook

To help reduce the chances of yarn snagging on your hook, I recommend printing at the lowest layer height you can. Some sanding may be needed, but for me wasn't needed. Happy crocheting! Layer height 0.12 mm Infill 25% Wall shells 3 PLA…

Pobrania
990
Polubienia
123
Ocena
4,8
P
PrintablesMateusz Tokarz

Nail-In Cable Clips | 10 Sizes (3mm to 15mm)

BOM: Printed with ROSA3D High Speed PLA Gray Save yourself a trip to the hardware store! This is a complete set of classic, nail-in cable clips for routing wires along baseboards, walls, or door frames. Key Features: Nail Compatibility:…

Pobrania
914
Polubienia
433
Ocena
5
P
PrintablesBowlerman72

Nut M10 4x15mm for PC4-M10 PTFE coupler

I needed a simple nut for the PC4-M10 PTFE coupling when making a drybox. Nothing fancy, created in OpenSCAD with “Nuts and Bolts v1.9.6 OpenSCAD library” by biomushroom that you can find here: https://www.thingiverse.com/thing:965737…

Pobrania
880
Polubienia
77
Ocena
5
P
PrintablesBasementLAB

Mechanic Parts Tray 145x170x15mm - Mechanic Stuff

Mechanic Parts Tray 145x170x15mm - Mechanic Stuff It is ideal for storing small parts or screws, for garage, maintenance, or DIY Overall dimensions: 145x170x15mm The model may be imported as a single assembly or grouped object. Before…

Pobrania
872
Polubienia
157
Ocena
5
P
PrintablesModu

Turbo Fan / Jet Fan - Magnetic Nozzle (15mm)

This is an alternative nozzle for a Turbo Fan/Jet Fan, featuring much higher nozzle pressure than the stock version. In my opinion, it offers the perfect balance between pressure and airflow. There's a small notch on one side, which…

Pobrania
856
Polubienia
135
Ocena
5
P
PrintablesMagig_I3Prusa

FDM Nosupport DND Terrain Small Portal No Steps Easyprint Fastprint 15min

As a wish of the DISCORD dungons channel the Small portal for TTRPG terrain prints without support at 0,3layerheight 15min no infill CR10 0,2 35min 6mm zigzag infill 2perimiter 2 botton and 2 top layer HAVE fun

Pobrania
784
Polubienia
79
Ocena
0
P
Printablesredaeq

Sohle, Einlegesohle, Schuh Erhöhung / Insole, shoe elevation 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, Größe 42

Einlegesohle, Schuh Erhöhung, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, Größe 42 Gedruckt in TPU, kann natürlich auf andere Größen skaliert werden. ----------- Insole, shoe elevation, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, size 42…

Pobrania
784
Polubienia
49
Ocena
4
P
PrintablesDankof

Grinder drill sharpener 115mm

Description: This is a remixed version of the original drill bit sharpener, redesigned to fit a 115mm diameter grinder. It offers a compact and efficient solution for sharpening your drill bits with ease. Printing Configuration: Material:…

Pobrania
680
Polubienia
112
Ocena
5
P
PrintablesLeedle Dynamics

Hardware Free BCAR (For DZ Muzzles or 15mm OD Alu Barrel)

A bit of an experimental BCAR with agressive twisting for sticking inside DZ Muzzles or on the outside of 15MM OD aluminium tube

Pobrania
605
Polubienia
133
Ocena
5
P
PrintablesLine Arc Line

15mm Strap Adjuster (Parametric)

This parametric strap adjuster is set to 15mm, but can be adjusted to plenty of sizes by changing the parameters in the Fusion 360 file!

Pobrania
599
Polubienia
74
Ocena
5
P
PrintablesMisterMaker

Tablespoon cup (15mL)

I needed this one, the others I found on Thingverse and here, where a bit crap. It has a description on the inside. I made it so it prints without supports. It is also correct up to 1%. (Although I didn't account for the letters) It is 1…

Pobrania
586
Polubienia
36
Ocena
5
P
PrintablesZocazola

NR200 Side panel 15mm extension (SEMI-OPEN AIR DESIGN)

This is a work in progress for the NR200- adding a side panel extension that's 3D printable to allow for taller CPU coolers like the NH-D15. Currently my designed clips hold the side panel 15mm out from the side (extending the 153-155mm…

Pobrania
578
Polubienia
35
Ocena
4
P
PrintablesCazMovi

CazBox - A light weight, Clamp on MatteBox (Now with 15mm rod adapters!)

I was tired of paying a lot of money for a really nice, and light weight Mattebox for a gimbal or steadicam So I made this! Hope you like it, I worked really hard on it. Print instructions Hey friends! I moved this over from Thingiverse…

Pobrania
534
Polubienia
65
Ocena
3,5
P
PrintablesDan m

Camera rig feet for 15mm rails

Design allows you to snap them into place without having to de-rig everything. Fits smallrig, but will fit any 15mm rail system where they are 60mm apart. Just added a model that makes the rails sits 0.8 inches higher. Some people that…

Pobrania
533
Polubienia
70
Ocena
5
P
PrintablesMisterChaos

Festival Wristband Clip 15mm

Little contrabtion to make the festival bands reusable without damaging them and having them tight and adjustable.

Pobrania
486
Polubienia
30
Ocena
5
P
PrintablesEA3D

Nema 23 Stepper Motor shaft D8 length 41-115mm

Stepper Motor Nema 23 length 41-115mm shaft D8

Pobrania
465
Polubienia
9
Ocena
0
P
PrintablesKexana

SUBSTR system 15mm Ball-Hinge-Ball (BHB) joint

This is a 15mm Ball-Hinge-Ball joint for use in the Substratum figure building system I will be utilize in my projects. It should be simple enough to print but the dowel might be a bit hard to insert at first, this is in order for the…

Pobrania
463
Polubienia
20
Ocena
0
P
PrintablesThreeD-Michael

Stackable Jar (115mm version)

Update 2023-12-10: I added a nice 3-fold stand to this storage system. It has the same bayonet closure as the jars, so that they stand securely. Please download here . This is the 115mm jar of my new “ Stackable Jars ” storage system. You…

Pobrania
462
Polubienia
223
Ocena
5
P
PrintablesJohnMartin

Extension Cord Reel - 50ft (15m) - Ambidextrous

This pushes the outer limits of the X1C's 256mm bed. It's 250mm in diameter. If you're a perfectionist, pause the print and remove the purge lines before letting the first layer go down. It's easy enough to trim it off if you don't. I…

Pobrania
432
Polubienia
97
Ocena
5
P
PrintablesMr. Togi

Starlink mini Netzteil 12-48V mit Step-up Booster für original 15m Kabel / Power Supply for 12V and 15m cable

(English below) Um die Starlink mini im Wohnmobil über 12V betreiben zu können, habe ich mir ein kleines 12V Netzteil für den KFZ Zigarettenanzünder gebaut. Damit lässt sich das original 15m Starlink Kabel weiterhin verwenden und es kommt…

Pobrania
424
Polubienia
31
Ocena
0

gridfinity 1x2 bin dremel tools, spanner, chuck and std. dremel 3.15mm (1/8") tools

Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…

Pobrania
418
Polubienia
121
Ocena
5
P
Printables3D Galaxy

BOLT AND NUT M3x15mm

Bolt 3 metric, star, thor, torx, nut, plain Bolt 3 metric, star, thor, torx, nut, plain. Lenght: 15mm Diameter: 3mm

Pobrania
410
Polubienia
21
Ocena
0
P
PrintablesMuffelkraft

Customizable M20 Cable Glands, Inserts, Plug and Gasket (12 & 15mm ID)

Complete set of M20 cable glands for 12mm and 15mm inner diameters, including 2-7-wire inserts (1.5mm² & 2.5mm² versions), reducing inserts (3-13mm) and a gasket for reliable sealing. Also includes an M20 plug compatible with the gasket…

Pobrania
392
Polubienia
37
Ocena
5
P
PrintablesMiller Bro

1/100 scale (15mm) low detail Buildings

I needed some quick and easy buildings to play Gale Force 9s Tanks:Modern Age So I modded a few of my 1/285scale buildings and one of my 1/48scale buildings and these are the result Edit:2019-07-09 - Thickened walls on Small 3 level…

Pobrania
388
Polubienia
29
Ocena
5
P
Printablesflegne

Pegstr - Pegboard Wizard for 15mm/4mm boards

Remix of the amazing Pegstr - Pegboard Wizard by mgx for use with pegboards with 4mm holes, 15mm spacing between holes (measured from middle of the holes or 11mm from edge to edge). In my case the board was just 2,5mm thick, but you can…

Pobrania
373
Polubienia
66
Ocena
5
P
Printablesmetalsepp

RadiusGauge v2 01-15mm

Das ist der Nachfolger (v2) meiner Radiuslehre 01-14mm. Das Problem dass keine 90 Grad Ecken gemessen werden konnten, wurde hier behoben. Die Daten sind für den Druck mit einer .4mm Düse und einer Schichthöhe von .2mm optimiert.

Pobrania
371
Polubienia
19
Ocena
5
P
PrintablesXimple Printing

Stackable Falcon centrifuge tube holder 50ml+15ml

My space in our lab fridge is a mess – many times i had to move out all the tubes in order to get the only one that I was looking for. They were lying flat, stacking on top of each other. So I designed this tube holder. This helps me to…

Pobrania
357
Polubienia
29
Ocena
4,67

ADXL Nozzle Mount 15mm

Nozzle Mount Adapter for an ADXL with 15mm hole distance. BOM: (3mm holes in bottom plate) 2 M3 Heat Inserts 1 M2 Heat Insert 1 M2 Screw BOM: (2mm holes in bottom plate) 3 M2 Heat Insert 1 M2 Screw

Pobrania
355
Polubienia
57
Ocena
5
P
PrintablesDSpecter

15ml Falcon Tube Rack

Just a simple rack I made for my partner who was needing one as the lab had none! It can hold both 15ml Falcon Tubes as well as EDTA (blood sample) tubes. Using a completely stock Mini+ with Prusament PLA, no infill (meant to be light and…

Pobrania
339
Polubienia
30
Ocena
0
P
PrintablesHeXeH

Skadis Hook 115mm - NA Skadis

A little fix to the original model to work with North American Skadis boards. For some reason the original model was set to 5.2mm width which would not fit the Skadis without adjusting it. This model is sized correctly for the North…

Pobrania
337
Polubienia
50
Ocena
4,5
P
Printablesonektd

Dell Optiplex Micro 15mm HDD Caddy

The factory HDD caddy for the Dell OptiPlex 9020 Micro only fits a 9mm drive. This is a custom version designed to fit a 15mm drive. I’m reuploading this to Printables so more people can find it, as it took me three hours to discover that…

Pobrania
324
Polubienia
31
Ocena
4
P
PrintablesJoe

Caliper gauge for Mitutoyo Digital Absolute 15mm IP67 (Tiefenmesser)

Extension for Mitutoyo caliper gauge (Tiefenmesser) made for MITUTOYO Digital Absolute 150 mm IP67 Input / idea came from @jackenhack but this 3D model does not fit to mine Mitutoyo caliper gauge, so I need to redesign the full model new.…

Pobrania
315
Polubienia
59
Ocena
5
P
Printablesingegneredentro

115mm Angle grinder dust cover Bosch GWS

115mm Angle grinder dust cover Bosch GWS

Pobrania
306
Polubienia
69
Ocena
5
P
PrintablesEd Yu

Extra tall Lack riser 215mm

There are holes for screws but I found they aren't needed at all.

Pobrania
304
Polubienia
86
Ocena
5
P
PrintablesRokapet

DoTerra bottle (15ml) holder

A holder tray for 17x DoTerra 15ml bottles.

Pobrania
304
Polubienia
16
Ocena
5
P
PrintablesSvUltreia

Large (Two Part) Storage Crates (360mm x 215mm x 50/90mm)

I needed storage crates for a specific cabinet which were larger than my Bambu build area (250x250mm). This crate prints in 2 large pieces which are joined by 4 pegs. The base has a small interlocking bevel to seal the gap and add minor…

Pobrania
302
Polubienia
61
Ocena
0
P
PrintablesDockGuy

USA 3-hole | 15mm | RC3 | ear flare | face shield

A remix of Prusa's RC3 face shield with: USA 4.25" 3-hole punch spacing (1/4" or 6mm holes) 15mm z-height (quicker print with minimal impact on durability) improved comfort near ears via 7.5° flare filets instead of chamfers to reduce…

Pobrania
276
Polubienia
0
Ocena
0
P
PrintablesMateusz Tokarz

Micro Pipe & Tube Clips | 8-15mm (M3)

BOM: Printed with ROSA3D High Speed PLA Gray This "Micro" set completes the collection, offering mounting solutions for very small diameter tubes. These are perfect for organizing small copper pipes (gas/hydraulic lines), PTFE tubes for…

Pobrania
275
Polubienia
77
Ocena
5
P
Printablescsants

Soporte para varilla de cortina de 15mm de diámetro

Soporte para sujertar la varilla de cortina de 15mm de diámetro

Pobrania
274
Polubienia
19
Ocena
0
P
PrintablesDIY Wizard

Mighty sword - giant 2,15m long collapsing sword

Welcome back guys! I made this model a whole while ago and decided to release it now! It's the longest 3d printed sword I have seen, its 2,15m long! READ THIS BEFORE PRINTING This is a model just for fun to show of . The retracting blade…

Pobrania
271
Polubienia
30
Ocena
0
P
PrintablesAlex

SpeedyBee Mario 5 GPS Mount for 15x15mm GPS module such as HGLRC M100 MINI

This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 15x15 mm HGLRC M100-MINI GPS module on a SpeedyBee Mario 5 frame.

Pobrania
269
Polubienia
20
Ocena
5
P
Printablesnfbr

Whale 15mm PEX Pipe Clip / Clamp

Screw clamp for Whale Marine water pipes. Takes larger screw than genuine clamp.

Pobrania
267
Polubienia
18
Ocena
4,67
P
PrintablesLucianociri

Escuadras de Ensamble en T y X para Muebles de Melamina de 15mm

[EN] You can find the description in English below [ES] Escuadras de Ensamble en X y T para Melamina de 15mm Estas escuadras de ensamble en X y T son la solución perfecta para quienes trabajan con melamina de 15mm, proporcionando una…

Pobrania
262
Polubienia
23
Ocena
0
P
PrintablesMinimayhem

Pipe clamp for 15mm copper pipe

I needed a clamp for my filament dry box setup. For use with 15mm copper pipe. Stops the filament spools from moving. requires M3x8mm cap head screw

Pobrania
255
Polubienia
32
Ocena
5
P
PrintablesStandardPickle

115mm Angle grinder and accessories wall/pegboard mount

Made for my Ryobi 115mm cordless angle grinder but I imagine it should work with most 115mm or smaller grinders. I've also made extra parts to hold the handle and the wrench. All parts mounted with 10G x 30mm wood screws into standard…

Pobrania
250
Polubienia
33
Ocena
4,5
P
PrintablesL3M4R

ExpressLRS Rubber-Ducky helical antenna template for 868MHz/915MHz

Printed template for DIY small 868MHz / 915MHz antenna. Total size 26x6mm alternative to 160mm dipole. Use 0.7mm wire to make the antenna spring. Use coaxial IPEX4 antenna cable, solder active, central wire to the spring (no passive part…

Pobrania
247
Polubienia
23
Ocena
0
P
PrintablesFelte

Small Dual Rotary Encoder for EC11 15mm (G1000 and other Panels)

This is a smaller version of Dual Rotary Encoder from FlightSimMaker. EC11 15mm round shaft. Update 2021-12-11: Added CRS Knob Added new Knobs with more details (V2) Added new Case with mounts (V2) Print Settings Printer Brand: Prusa…

Pobrania
245
Polubienia
28
Ocena
0
P
PrintablesElValen

Clipper Guard wahl 2 ¼ - 57.15mm

Modelo de un clipper guard para maquinas wahl que te deja a 57.15mm o 2 ¼ in

Pobrania
243
Polubienia
15
Ocena
0

Sanding block - Large 115mm / 4.5in width

What is it? Sanding block with a 115 mm width to match common sand paper roll sizes. It has two knobs to easily release a sand paper for quick replacement. Holding a large block on it's own might not be as comfortable so it has a handle…

Pobrania
241
Polubienia
56
Ocena
5
P
PrintablesRandomShape

Plant pots - 115mm and 95mm

115mm and 95mm plant pots

Pobrania
241
Polubienia
62
Ocena
0
P
PrintablesGodnamedThor

Anglegrinder holder, 115mm for modular wallmount

Anglegrinder holder for the modular wallmount. 2 pieces, you'll need m4x15 screws to put it together. Baseplate and description: https://www.printables.com/model/202771-modular-wallmount-system-for-various-powertools

Pobrania
240
Polubienia
39
Ocena
0
P
PrintablesDockGuy

15mm thin | USA 3-hole | ear flares for comfort

A remix of Prusa's RC3 USA 3-post face shield with: 15mm z-height vs 20mm for Prusa's (quicker print and 25% less material with minimal impact on durability) improved comfort near ears via 7.5° flare filets instead of chamfers to reduce…

Pobrania
239
Polubienia
1
Ocena
0
P
PrintablesMario Alvarez

HSW large shelf of 200 x 115mm.

large shelf of 200 x 115mm. for honeycomb wall

Pobrania
238
Polubienia
45
Ocena
5
P
PrintablesVon_Bednar

Coupris Kineema (Disco Elysium 1-100 / 15mm scale)

Coupris Kineema from Disco Elysium . Based on the concept art and the in-game model, then simplified a bit to make printing easier. I am using it as wargaming terrain, but I think the model is detailed enough to work for dioramas as well.…

Pobrania
237
Polubienia
24
Ocena
5
P
Printableszaventh

Ventilator (CPAP) Hose Reducer Adapter 15mm x 22mm

This 3D printable model is a reducing adapter designed to seamlessly connect ventilator circuits, such as CPAP hoses, with different diameter requirements. It allows for the adaptation between adult and pediatric hose sizes, featuring a…

Pobrania
227
Polubienia
20
Ocena
5
P
Printablesseb111425

Milwaukee M12 Battery Holder Pegboard 15mm grid

Milwaukee M12 Battery Holder Pegboard 15mm grid (center to center).

Pobrania
225
Polubienia
28
Ocena
5

IKEA Metod Leg Clip (15mm and 30mm extended) REMIX

15mm and 30mm extension if you need to bring the Kickboard/plinth more forward

Pobrania
220
Polubienia
11
Ocena
5
P
PrintablesFishGee

M6 bolt 50mm overall, 15mm threads

I printed this to use in building the Digital Sundial, http://www.thingiverse.com/thing:1068443 Customized version of http://www.thingiverse.com/thing:193647 Created with Customizer!…

Pobrania
220
Polubienia
9
Ocena
5
P
PrintablesBloodyT

Pipe Clamp 15mm Schneider AIRnet, Rohrschelle, Quick Schelle

15mm Clamps for the pneumatic pipe system from Schneider AIRNet

Pobrania
220
Polubienia
21
Ocena
5
Pobrania
219
Polubienia
18
Ocena
5
P
PrintablesEthan Matthews

HSW magnet mount - 15mm magnet

Honeycomb HSW section that fits a single 15x2mm or 15x3mm magnet. Use to mount HSW on any metal surface or use to mount metal items on your HSW. Print flat side down for best results. Depending on how heavy the items you are storing are…

Pobrania
219
Polubienia
48
Ocena
4,67
P
PrintablesChevdor

125x15mm tube printed as vase for Z axis test on high parts

This model will print in 33 minutes. It allow testing your z-axis for wobble on a 125mm tall part. It will also challenge you bed adhesion but should print without any issue if your printer works fine.

Pobrania
217
Polubienia
9
Ocena
0
P
PrintablesFormative3D

DJI Lidar Unit 15mm Rod Mount

15mm Rod mount for the DJI Focus Pro Lidar Mount. Uses 2 M5 Nuts, 2 M5 Screws, and the screws needed to mount the Lidar Sensor. Once you've printed the 2 parts, insert the M5 nuts in the recess, then slide the top of the bracket over (you…

Pobrania
210
Polubienia
7
Ocena
0

Fingerzinken Schablone 15mm

Schablone zum fräsen von Fingerzinken mit 15mm. Für bretter bis zu einer Stärke von 30mm Wer weiß, wofür man dieses Werkzeug braucht, weiß auch wie man es benutzt, desshalb hier keine Erklärung : ).

Pobrania
209
Polubienia
7
Ocena
0
P
PrintablesMagig_I3Prusa

Fastprint FDM EarEgg Easter Decoration 15min noinfill nosupport

Prints in under 15min FDMready NOinfill NoSupport HAVE fun This is a complete new modell despite so many Easter egg PLEASE see all the other 600 creations here FREE available https://www.printables.com/@Magig_I3Prusa/models

Pobrania
207
Polubienia
22
Ocena
0
P
PrintablesNicerSlicer

Gardena Micro-Drip Irrigation 0.5 inch (15mm) clamp stake

Gardena Micro-Drip Irrigation 0.5 inch (15mm) clamp stake

Pobrania
205
Polubienia
25
Ocena
5
P
Printablesimperatordavus

15mm Prusa Protective Face Shield - RC3 - Comfort Edition

I remixed the original Prusa RC3 headband to make it only 15mm tall and I also flared out the tips to improve comfort. Having tried on the RC3 headband, the ends always put too much pressure against my head. I found out that by spreading…

Pobrania
202
Polubienia
0
Ocena
0
P
PrintablesGrandCedre

Super tight 15mm to 19mm adapter

I've tried other 15mm to 19mm adapter and they usually work well. But I had a problem once with the adapter being a little bit to lose so I made my own with no tolerance. the inner diameter is exactly 15mm and the outer diameter is…

Pobrania
201
Polubienia
22
Ocena
0
P
PrintablesSkyfinder84

Face Shield A4 sheet 15mm Fabric Band (Block Version)

ENGLISH VERSION AFTER Questa è una versione in foglio di acetato A4 (verticale e orizzontale), con 3 asole di AUTO BLOCCO per fascia elastica da cucito di altezza 15 mm. Suggerisco versione orizzontale per Infermieri e Medici che…

Pobrania
200
Polubienia
0
Ocena
0
P
Printableswafflecart

Cute Dog Keyring / Keychain set - 15min print

Cute set of 4 dog keyrings that are perfect for keys and gifts. Prints in just 15 minutes! Tips: - Use color / filament change in your slicer software to achieve multi color, no MMU or AMS required. - Like and follow for good luck! Follow…

Pobrania
200
Polubienia
33
Ocena
5
P
PrintablesJeffrey Lee

Staircase tube rack for 15mL and 50mL conical Falcon tubes

Staircase tube rack. Rows have differing elevation for easy access to each tube 2x6 15mL conical Falcon tubes, 2x5 50mL conical Falcon tubes. Holds a total of 22 tubes. No supports needed. Base is mostly hollowed out to decrease amount of…

Pobrania
197
Polubienia
22
Ocena
0
P
PrintablesBrokenPoet

REV Robotics 15mm Extrusion

This is an approximation of the REV Robotics 15mm extrusion. It was created to support build activities of FIRST FTC Team #13599 Bruinbots for their 2018 season. The OpenSCAD file is attached for your use and improvement. There are pieces…

Pobrania
195
Polubienia
3
Ocena
0
P
PrintablesWillyCKH

Cable Zip Tie Mount 15x15mm

Cable Zip Tie Mount 15x15mm To install, you may add double-sided tape or glue to the bottom, and then attach the cable with zip tie. This model doesn't require support to print.

Pobrania
195
Polubienia
18
Ocena
0
P
Printablesvismakan

60x60x15mm fan blades replacement

0.1mm layer height. infill 20%. outside diameter 56mm, inside diameter 30mm, diameter for axle 2mm.

Pobrania
190
Polubienia
17
Ocena
0
P
Printablesseb111425

Combo Wrench Holder Pegboard 15mm grid (screw version) (e.g. Proxxon Set)

Combo Wrench Holder Pegboard 15mm grid (screw version) (e.g. Proxxon Set) I adapted it to a 15mm Pegboard grid with 6.5mm holes for 6mm screws. I cut 6mm threads into the 5mm holes to use 6mm metric screws.

Pobrania
188
Polubienia
22
Ocena
0
P
Printablesjoshua.camera

CAM TO 15MM ROD CLIP

Easy to print cable holder for the cleanest of camera builds. Cheers!

Pobrania
188
Polubienia
28
Ocena
0

Rainwater tank overflow to 15mm garden hose

This is a remix of Rain barrell overflow 1'' hose adaptor (by Toqisek ) and Hose Connector / Adapter Set - Gardena (R) Quick-Connect Compatible, 3/4" Faucets, and 1/2" Hoses (by guppyk ), both on Thingiverse (Printables doesn't let me use…

Pobrania
186
Polubienia
24
Ocena
5
P
PrintablesLucas

Dishwasher Powder Scoop 15g/15ml

The original model links to a GitHub repo with a swift package. I adapted the code to generate a 15ml/15g scoop. For convenience, I uploaded it here in case anyone else needs a scoop in that size.

Pobrania
184
Polubienia
19
Ocena
5

Niimbot Label Case (12-15mm or 25mm wide)

Niimbot label cases for 25mm and 12-15mm wide tapes.

Pobrania
183
Polubienia
35
Ocena
5
P
PrintablesDirk

15mm copper pipe clamp saddle

15mm copper pipe clamp saddle. PETG 0.20mm 25% infill. Created with FreeCAD.

Pobrania
178
Polubienia
29
Ocena
5
P
Printablespxzvc

Print Bed Scraper - Quick Print 15min - Minimal Filament

Introducing a highly efficient and economical print-bed scraper designed for rapid production. This scraper takes only 15 minutes to print and uses minimal filament, thanks to its strategically placed holes and cutouts. Despite its low…

Pobrania
178
Polubienia
5
Ocena
5