1609 modeli
Bohrschablone für Unterputzdosen und Hohlwanddosen Bohrschablone zum markieren von Bohrlöchern für 68mm Unterputzdosen und Hohlwanddosen (Steckdosen, Schalterdosen) mit Zentrierung in 68mm Bohrungen zum genauen Platzieren.. Die…
Wydruk około 4,14 €–5,06 € nettoWstępna wycena jednego wariantu
If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped Halter für 3-Fach Steckdose mit Ausschnitten für USB und Kabel. Kann mit Senkkopfschrauben hängend angeschraubt werden. Die Maße sind Breite = 54mm…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My kid bedroom curtains had some eylets detached from the fabric, so as a replacement designed this simple model with 41 mm inner diamenter (similar to the original ones). .Printed on a MK3S+; . Filament clear PETG; .0,15 Layer height;
Wydruk około 0,88 €–1,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For those of you who place solder paste on a PCB by hand using a solder paste syringe, this tool provides additional control and consistency to the application process. Parts Printed: Syringe Holder [A] Syringe Plunger [B] Knob [C] 1ml…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update: January 13, 2022 added details for better finger grip. This is another version of DC output power connector 5.5x2.1mm holder. To get connected on a Parkside battery, you need any of these two: 70578-parkside-x20v or…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
Bohrlochabdeckug 11x14x4mm
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
IBC reduction thread 2.21mm 2.34"/32mm
Wydruk około 8,29 €–10,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a small bowl to keep small parts or use for sorting parts, printed without supports. This bowl feels like a general bought bowl this is because there is only a small part which has a infill most is solid PLA. We use it in the…
Wydruk około 2,83 €–3,46 € nettoWstępna wycena jednego wariantu
Features: compliant, easy to use construction non-intrusive design secure & seamless chassis mounting solution Comments: I briefly tested the driving performance with the mounting kit attached to the minicar and noted a mostly negligible…
Wydruk około 2,28 €–2,79 € nettoWstępna wycena jednego wariantu
Projekt Leptan (Addon) Project Leptan: Lepta v1.0 RPLidar A1M8 mount including 40mm Fan mount. This mount replaces the TopBar or RingBar. In case of the RingBar replacement the LED ring will not have a place to be mounted anymore. The…
Wydruk około 1,53 €–1,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mesh filter holder made of PLA eSun Basic No supports required, I used a 10% filling.
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
This is a rosette for the heater mounting. Two parts to print.
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
3DJake filament spool holder for ikea 365+ dry box
Wydruk około 3,62 €–4,42 € nettoWstępna wycena jednego wariantu
Om dat de afmetingen van het verloop niet te koop waren in de winkel heb ik het zelf afgedrukt. Because the dimensions of the gradient were not for sale in the store, I printed it myself. Groeten Ludo
Wydruk około 3,93 €–4,81 € nettoWstępna wycena jednego wariantu
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Wydruk około 7,66 €–9,36 € nettoWstępna wycena jednego wariantu
Enjoy!! As you like use it!!
Wydruk około 12,39 €–15,14 € nettoWstępna wycena jednego wariantu
Just a quick design, for a BambuLab A1 Mini LED Light Bar Mod. Other mods mount the strip in the front or directly on the vertical rail, but I wanted to mount the LEDstrip on the back of the vertical rail with a slight forward angle. The…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
I would love to share with all of you my holder/dock for Apple's M4 Mini with integrated OWC Express 1M2 holder enclosure. With added notch for the power button Print Setting's : I Recommend PETG or any stronger more heat resistant…
Wydruk około 4,51 €–5,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made a few small tweaks to jshank's design to the support the Logitech C310 and turned the holder upside down to leave more space under the webcam. This is my first time even using blender to model. Prusa Slicer will complain about the…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The green mat is 1 meter for scale. You can count frames to determine the speed it you like! The video is at 30 fps like all standard youtube videos. It covered the distance in about 1.2 frames, so it is going around 25 m/s, or 90 km/h. I…
The camera on my k1c was not perfectly centered so I redesigned the bracket with an angle of 10 degrees. It replaces the original one, just unmount the whole camera (1 screw) disassembly and replace the original bracket with printed one…
Metric drill bit set wall mount 1mm to 10 mm
安装所需 1：4颗螺纹长度为10MM的M3螺丝，4颗M3螺母 2： 需要在X1CC或者P1SC寻找多余螺丝替换ams lite的原本的螺丝才能安装。 特别提醒： A1mini不能独立完成这个打印任务。 安装视频可以在B站或抖音寻找（嘟吉）进行观看。
The Donut Espresso Shaker is an espresso shaker that enables even distribution when preparing espresso for a wide range of portafilter sizes. What makes the Donut Shaker special is that it achieves this result with any portafilter size…
This cable organizer is for 1m cable from apple or also other when they have similar endings. PLA or PETG for printing and 15 % infill no supports and print in place
Про то как пользоваться этим приспособлением я рассказываю в этом видео: https://boosty.to/internal_engineer/posts/2f7f2e46-ffed-48f4-83ae-be5985ef6b76 Если у вас закусывает верхнюю втулку оси X, эта 3D модель + наждачная бумага поможет…
Collection of Gridfinity basic cups height 11 (81mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
Create a minimalist and efficient workspace with this vertical laptop stand. By holding your laptop upright, it frees up significant desk real estate and promotes better heat dissipation for optimal performance. This universal stand…
Are you tired of dumping coffee all over your counter every you time dose grounds into your portafilter? Do you have a 51mm portafilter? Well then I made this dosing funnel just for you my friend! Introducing DOSING FUNNEL FOR 51MM…
After a few interations this model did well during testing. Especially when using only one hand for tampering, the portafilter is not stable when pressing down, so a solution must be found. For my portafilter the fit is quite snug. If you…
This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 21x21 mm HGLRC M100-5883 GPS module on a SpeedyBee Mario 5 frame. GPS mount with GoPro v2: better fit and easier…
81mm mortar round used for L16 81mm mortar.
Dieser Anschlag ist für Metalllineale mit den Maßen 15mm x 1mm (Breite / Dicke) konstruiert. Er lässt sich problemlos drucken, keine Stützen etc. Es wird auch kein zusätzliches Zubehör benötigt. Weitere Größen sind unter meinem Profil zu…
22mm picatinny rail adapter to use in 11mm rail. Needs: 1x 20mm m3 screw 1x m3 nut
.2mm layer height; .4mm nozzle; PLA 4 or more perimeters and infill whatever you want.
Zentriering von 57.1mm auf 66.6mm in 10mm und 12mm tiefe Hub centric ring from 57.1mm to 66.6mm in 10mm and 12mm depth NEW VERSION ONLINE V2-→12mm V3-→10mm Gedruckt in PETG//Printed in PETG 0,12mm Qualität//0.12mm quality 0.4mm…
Introducing the most accurate representation of the m821 mortar I could muster from tracing drawings from publications and looking at reference pictures. I was extremely pleased at some users who had printed my old mortar files and even…
The scope mounts allow you to quickly and easily find the proper height. The mounts fit on an 11 mm dovetail and fit scopes with a tube diameter of 1" (25.4 mm). Have now added the mounts in 30 mm as well. The heights correspond to those…
This feeder is based on stock K1 extruder. It lets to fix two problems: bad clamping and overheating. There are two versions: KKb - using of stock metal bracket (still can face overheating). In this case one pin on the bracket should be…
FDM -> It is recommended to use a layer height below 0.15 for printing. It is recommended to use LCD or SLA for printing to obtain higher precision. "A series of high-precision bullet models." In order to meet the needs of military…
Print with ABS, ASA or PA-CF (or any other high-temperature filament) with 100% infill. No Support needed V2 added, more stable and easy to print
Printed with tamper side to the build plate with supports.
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
Organizador de brocas para pared desde 1 mm hasta 14, incluye modelo de sobremesa. No olvides darle like si lo descargas, con esto apoyaras mi contenido.
The Prusa MK4's extruder filament inlet has a threaded M5 hole for which Prusa provides a Festo QSM-M5 fitting to use with MMU3. This model replaces the QSM-M5 in a reverse bowden system for the MK4. The adapter is designed to take a…
IF YOU NEED THE EPIC ULTRA FOR THE "RG351MP" ( Metal Plus) FOLLOW THIS LINK!!!: https://www.printables.com/model/240177-anbernic-rg351mp-game-pad-epic-ultra Please respect the Licence the thing comes with! Thanks Thanks to Thingiverse…
I saw a few camera mounts with better views of the build plate, but I wasn't entirely happy. Some had issues with glare on the K1C, some are too high, etc. I also found the adjustable one too complicated and bulky. This one is simple and…
Récupérateur à déchet de purge pour Bambu Lab A1 / A1 mini. Ce dernier est compact et s'intégre parfaitement à l'imprimante. Il se fixe simplement en l'insérant dans la forme du purgeur de l'imprimeur, et donc facilement retirable. Ce…
These are replacement scales for 91mm Victorinox Swiss Army Knives. You can edit the .STEP files to add your own custom text or logo. Adding a filament swap at the first layer of the logo/text really makes it stand out. The holes are…
Snug fit for Delonghi and other 51mm portafilters. .2mm layer height, extra perimeters. Food safe at your own risk.
Aluminum Extrusion 2020 Endcap
This will give an indication of whether the tension on both belts are equal
Hi, this is a Remix from: Scaled up to 1m sword lenght with hole for M8 threaded rod to stabilize Category: 3D Printing
Being newer to RC flying, I crashed my AeroScout hard enough to fracture the wooden servo & battery tray. It features a built-in lap joint for strength when gluing. I originally tried an existing design by TeslaScorpion , but ended up…
This is a feeder for Creality K1/K1MAX which is based on BMG extruder gear set. This feeder in lighter than original K1's and has adjustable rocker tension. There are 4 variants: * MK - for 10-teeth NEMA14 motors * MKe - same as MK but a…
Dimensions: Outer Diameter: 6" (152.4mm) Overall Height: 1.5" (38.1mm) Cutout Depth: 1.25" (31.75mm) **Cutout Width: 0.16" (4.1mm) UPDATED V2 from 3.2mm
Though designed for a 2006 Toyota Aygo, it may just fit your washer tank opening, as long as it has a 51mm / 2 inch diameter snap-fit rim. Printing I printed this in ABS, but most thermoplastics will probably work fine. Washer fluid…
A simple template for marking switches and sockets. Thanks to the built-in holder for mini spirit levels, the switches always sit perfectly straight. There is an 8mm opening in the middle for pre-drilling or marking. The distance between…
Linear rail x-axis conversion for the K1 and K1 Max using a single MGN12 rail Rail +Carriage: 1x - 320mm (K1) or 400mm (K1Max) MGN12 rail 1x - MGN12H Carriage You can buy this at alliexpress K1 or K1Max
All credits to placebo_design for his beautiful and functional design (thingiverse.com/placebo_design/designs). This is a remix of “51mm Funnel for porta filter Delonghi EC680 series” by “Placebo_design” (thingiverse.com/thing:3471204).…
Based on drawings for cases from Apple, this case perfectly matches the contours of the watch to create a firm snap-on fit. Works with any 41mm Apple Watch 8 or 7. I used this to replace my broken OtterBox Case, and barely notice its on…
Update 3/5/23: I have added a wider bulb holder for the IOM/US1M style boats. I also added Star 45 boat arms, bulb holder, plates, and clamps. Update 2/4/22: I added a longer pipe catch piece to allow the stand to go into “narrow” mode.…
picatinny adapter 20mm to 11mm (lower adapter to avoid raising the sights more)
A rotating base for turrets, pan-and-tilt mounts, launchers, and swinging arms. The ring gear opens to an 81mm inner diameter. A thrust bearing stack carries the ring, so it takes the radial load from the ring itself and the lateral push…
BOM: 1x - Cartographer Flat Pack 5x - M2 Heat inserts (Standard) 3.6OD 4.0L 2x - M3 Heat Inserts (Standard) 4.6OD 5.7L 2x - M3x8 BHCS 2x - M2x10 or M2x8 BHCS 3x - M2x6 BHCS 1x - ~3m total of 26-30 AWG stranded silicone wire For further…
NEW Added three slot version to support a mini 3d printed toothpick. Can use the original tooth pick slot for a fire steel. For best results you'll need a 0.2mm nozzle. Included a couple other versions of the opposite side in the 3mf.
Should press fit with moderate pressure, tougher fits can tap gently with a mallet. Printed on Flashforge Finder with PLA.
I used the design by Wittmarch to build a very similar launch ramp to fit my 1m Folding Hotwheels Track (expandable) . The change to the launch extension is because this is intended for my 2-4 year old grandchildren so it needs to be…
Once upon a time... I felt the need to sort my gravel, soil, compost and other such liquidicious solids. If only I could easily remove such pesky things like small pebbles or sticks from my luscious powders! Behold! I have created the…
There are already several models out there; Didn't find one with perfect fit for my DeLonghi model which didn't take forever to print. => On to CAD and made my own. Model number of espresso machine in headline to identify if it fits for…
MAGNETS - Uses five 6x2 magnets (measured size is 5.94x1.6) inserted in the bottom. Place adjacent magnets in same direction. While not required to keep the bits in, it stops them moving around. The groove under the bits is ultimately…
The adapter is designed to connect a hose to a thread G1/2". Available diameter for hose: 7 | 7,5 | 8 | 8,5 | 9 | 9,5 | 10 | 10,5 | 11mm Print instruction: material: PETG layer height: 0,2mm (0,3mm) nozzle: 0,6mm (0,4mm) support: no…
I tried several 3d printed whistles and this one was the loudest, and so I've integrated it into a scale - much like the discontinued victorinox whistle scale. Also included opposite side plus scales with and without victorinox logo, per…
Based on https://www.printables.com/model/452840-apple-watch-8-7-41mm-case-perfect-fit-with-step-fi , this case perfectly matches the contours of the watch to create a firm snap-on fit with round borders. Works with any 41mm Apple Watch…
Remixed to make useful with a Eureka Mignon on a tilted base. It may also be useful for people who want the holder to retain the dosing cup more securely without a tilted base. Have also included a version for different size dosing cup…
A 2x2 Gridfinity Stand to store Bottles with 21mm diameter, e.g. Vape Liquids with 10ml.
Radius Gauges Inner/Outer 1mm to 30mm Inner and outer radius gauges covering measurements from 1mm to 30mm in 1mm increments. There are a few of these models around, but I wanted something with large text that I could put on a wire loop…
This is a simple model of an 81mm Mortar, L16. Prints fairly well in a larger size with FDM, not much needed in the way of supports. Enjoy Category: Props
Remixed to fit for 31mm and 1.25inch Washers to Blockmit for Cold Wallet to Backup Crypto Seed Phrases
4/14/2025 Modified the tip holder tab to be offset as it became apparent that it is interfering with the iron. Images do not reflect the modification.
This is an updated version of the feeder for Creality K1/K1MAX which is based on BMG extruder gear set. Changings in Ver.2: - more convenient unclencher - both 10t/12t motors supporting - closed body (more simple) - fixed some errors…
I designed it for my Delonghi Dedica portafilter tamping pad. goal was to design one that would match the rubber tamping mat. I intentionally keep the design the way that it is possible to use it as a standalone as well.
0.4 0.5 0.6 0.7 0.8 0.9 1mm. sieves 0.4mm and 0.5mm sieves may print slightly smaller.
This is my attempt at making the new DJI O4 Air Unit compatible with the SpeedyBee Mario 5 frame and an HGLRC M100-5883 GPS module. The mount should also fit a variety of 21mm GPS modules, though I haven’t tested it with others. It must…
Dieser Anschlag ist für Metalllineale mit den Maßen 19mm x 1mm (Breite / Dicke) konstruiert. Er lässt sich problemlos drucken, keine Stützen etc. Es wird auch kein zusätzliches Zubehör benötigt. Weitere Größen sind unter meinem Profil zu…
The model is updated with better fit screws. A replica 81mm mortar ‘roughly’ to scale. no hardware needed, just some glue. Those savvy enough will notice certain pieces are not consistent with the same specific round (The fuse and body…
STL model units are mm
This is a stand to support the filter handle for a SMEG Expresso maker rather than just sitting the handle itself on the table surface when tamping down the coffee puck. The SMEG uses 51mm basket and the filter handle body is approx 60mm…
This is a 51mm coffee funnel that allows you to fill your sieve tray without getting everything dirty. Used printer settings: Filament: PETG Layer height: 0.24 mm Supports: Enabled Infill 15% Walls: 2 Bottom layer: 4 Top layer: 4
Printed in ABS+ small amount of tree supports needed 51mm Diameter end with anti slip ring. Donate now and make a difference in someone’s life!
experimentiere und vinde heraus was er kann Reuploaded form: https://www.thingiverse.com/thing:5190874
A remix of Antonin Pas's original design for a brake disk spacer, with a slightly larger back to provide a finger “handle” that doesn't slip so easily. Should fit most standard brake calipers (tested with my wife's Shimano).
Replacement nose pad for glasses. Screw-on-style, oval pad. Quickly thrown together in Tinkercad. You can adapt the design to your needs here: https://www.tinkercad.com/things/fNcHToouGeY Measurements: Pad len = 13.4mm, pad width 7.4, pad…
I thought this would be a a simple part to design… boy was I wrong. The reamer on the 91mm Swiss Army Knife (same reamer on the Ranger Grip series) has a curved edge, it begins at a 96° angle from the knife body and is bulged for the nail…
Customizable scales for a Victorinox knife with space for toothpick/tweezers
I was having issues getting the hinges to print properly without them fusing together even with modifying flow and resolution on my Ender 3. I added an additonal 0.1mm gap on each side and it seems to print perfectly. Print Settings…
Print with ABS, ASA or any other high-temperature filament, with 100% infill. No Support needed, I printed with Support, my ABS has Layer adhesion issues. added a Version without dowel pin hole added a Version V3 V3 removed - construction…
Coffee Tamper for 51mm Basket Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 25-100% Filament: Devil's Design PLA PC Gray Notes: Wall Line Width: 0.4 Wall Line Count: 4 Category:…
These are 91mm Spoked rim and wheel tires design for RC Planes. The video provided shows how these exact rims were made using Tinkercad. Follow along and learn to make your own custom parts for RC planes. Black TPU:…
Das sind zwei Bohrfutter für Bohrer von 1mm bis 7mmm und 1mm bis 10mm, mit dem von Hand löcher in 3D-Druckteilen nachgearbeitet werden können. Die Durchmesser der Bohrfutter beträgt 29mm und 40mm. BF - Bohrfutter groß BFk - Bohrfutter…
