1178 modeli
Useful for finding the right distance of the Super PINDA from the print bed. The optimal distance for the Super PINDA is about 1.5mm. That should get your optimal Live Z/first layer calibration to somewhere around -1.00, so you'll have…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
This is a remix/redesign of the T-slot extrusion covers by MegardStudio that was featured on the Voidstar Labs video of prints for your printer . After printing out the full plate, I found the pieces were exceptionally difficult to snap…
Wydruk około 1,75 €–2,13 € nettoWstępna wycena jednego wariantu
Very practical sandpaper holder. If the sandpaper is used up, the sanding belt can simply be moved a few centimeters. The sandpaper belt holder consists of 3 printed components: Block Tensioner Eccentric Other accessories: Cylindrical pin…
Wydruk około 4,32 €–5,28 € nettoWstępna wycena jednego wariantu
These parts enable mounting the Articulating Raspberry Pi Camera Mount on the base extrusions of the i3 MK3. Just print with default settings without any supports. I like to use a 0.15mm or lower layer height for better definition of the…
Wydruk około 1,11 €–1,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hammerkopfmutter T-Nut Mutter mit M4 Gewinde für 30x30 Aluminumprofile Nut / Slot / Series / U 6
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
very easy to print. I used prusament petg the fit is tight so i cleaned up inside bore and installed bushing sleeve in the printed cushion. with the bolt in the bushing, I used a hammer to tap in the bushing and cushion until centered in…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Antivibration feet for MK3x printers and other printers using 3030 profiles. Needed for assembly: 1x M3x18 1x 3030 M3 T slot sliding nut 1x Sqash ball
Wydruk około 1,12 €–1,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hi As I could not find any box that would fit my needs I had to do it my self :-) I printed PETG but you can do PLA or anything that makes sense to you. Top lid has bigger cutouts in order to easily open Lid in certain “angle” without…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 3,60 €–4,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Motivation [ clip system 16mm aluminium tubes ] In the Ally folding canoes, 16mm aluminium tubes are held in place by clips. These clips somehow seem to be difficult to buy at the moment, so I decided to design a 3D-printable model for…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a basic 3030 extrusion mount for the SP602E Bluetooth LED Controller ( https://www.amazon.com/BTF-LIGHTING-WS2812B-Bluetooth-Controller-Outputs/dp/B0B1DJVG4Q?th=1 ). To mount the controller to the mount, 2x 6mm-8mm M3 bolts and…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
Camera housing for C920 and 3030 extrusions (20° inclination) No supports needed Additional hardware: ¼ inch camera screw https://www.amazon.nl/-/en/SMALLRIG-Screw-D-ring-Mounting-Release/dp/B01N1MYQX0 https://www.amazon.nl/dp/B0CP5R235B…
Wydruk około 1,64 €–2,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Not necessarily to be printed, but used when designing projects in CAD. STL, OBJ, F3D and STEP files included. New 2020-R Extrusion! Please don't forget to like the model if you find it useful. Thanks!
Supported Corner Bracket HEAVY-DUTY - 2020 / 3030 / 4040 / 5050 V/T-Slot Profile REV.1 Engineered for easy printing and minimal material waste, this 90° bracket offers sturdy, rigid performance Suitable for: 2020 -3030 -4040 -5050 V-Slot…
Need the right profile fast? Just put it in a slicer, scale it as needed, and print! Included Profiles: 20x20 20x40 4H 20x40 30x30 40x40 40x80 80x80 These models are based on the MayTec® profile system. Update: I have designed some T-nut…
This T-nut for 3030 extrusions doesn't require a hex nut or brass insert, as the bolt is screwed directly into the plastic. T-nuts for classic hex nuts often have the problem that they are weakened by the thinner plastic or one often…
This is my model of the Prometheus from the Stargate SG1. Once again the model is done completely by me, it is a kit where you should not need any glue (except for repair maybe). The assembly is much simpler then the 304, but still, I…
Für alle deutschen Nutzer habe ich hier noch ein Video gemacht, wie ich einen Unterbau für meinen neuen 3D Drucker erstellt und gebaut habe. Vielelicht inspiriert es ja den ein oder anderen. For all english users, the following youtube…
I recently did some cable management on a RatRig V-Core 3 and found myself in search for a minimalistic solution to keep cables within common 3030 profiles. There were no models to my liking so I designed one. Consider exporting your own…
Why? I needed adapters to mount the Wago 221 series connectors to 2020 AND 3030 extrusions. I wanted them to be modular in size and space efficient. Those adapters are a remix of the following models:…
Very simple alignment gauge for mounting an MGN12 on a 2020 or 3030 extrusion. Will work on any 20mm or 30mm T slot extrusion face. Put the linear rail on the extrusion with bolts fitted, place a few of these over the rail / extrusion and…
Drill guide that can be securely fastened to 2020/3030 aluminum profiles. Durability is enhanced by using metal pipes together. The STL files are designed for 5mm and 7mm drill holes , but the hole sizes can be customized by using the…
I've designed this drybox for the Prusa XL, of course it can be attached anywhere on 3030 aluminum extrusions. The drybox is opened via the red wheel with a 90° turn. It also holds the container for the desiccant, which could not be…
M5 T-Nut 30x30mm Aluminium Extrusion Profiles. Apparently those are hard to find where I live. Not a single store in my town sells those things. I bet you are asking “But can't you just order them online?”. Well I could, but then I'll…
Fully printable T-nut for 3030 aluminum extrusions such as those found on the Prusa Mk3/Mk3S. Available in M3, M4, and M5 printed-in threads. Can handle light duty work as long as you're not hamfisted and over-tighten it. I've used these…
2020 / 3030 / 4040 T-Slot Framing Structural Brackets Ideal for use in 3D printers, CNC machines, laser cutters, enclosures, and other DIY frame structures. Suitable for: 2020 3030 4040 All our designs are free to download and use—because…
This is my Mark II X-303 Prometheus from the show Stargate. The model is improved version of my original model and this time comes with several features. It has one hangar bay open and in it, there is an F-302. It has retractable landing…
About model My custom design of Loudspeeker trim (front door) for Volkswagen T4. Made for a friend's Multivan, because I didn't like an already available multipart cover with need of glueing on Thingiverse. Compatibility For T4 Multivan /…
Extrusion corner brackets with built-in plates. Short and tall versions for 2020, 3030, and 4040 extruded aluminum -- and now with 2525. Print three of each for each corner. I like to break things down to essential patterns and make…
This model is compatible with the lego system.
The Swiss Card is a great multitool, ive carried one for 11 years, but its outdated and there are common tools now that it doesnt include. This print uses the pen and tweezers and pen from a swiss card, but uses a custom, more comfortable…
Gusset Bracket - 2020 / 3030 / 4040 / 5050 Profile Suitable for: 2020 -3030 -4040 -5050 V-Slot T-Slot Alu profile 20x20x20mm 30x30x30mm 40x40x40mm 50x50x50mm Resize to adjust dimensions All our designs are free to download and use—because…
Slotcover fits for the 3030 profiles of your Mini/Mini+! Please measure the two pieces for the right side. The length depends of the location of the mounting plate for the z-axis. You can adjust the lentgh in your prusa slicer or any…
This model is compatible with the lego system.
3030 Extrusion Zip Tie Clip. This is a remix from the 2020 Extrusion Zip Tie Clip found on this site and linked here. I enlarged it for the 3030 extrusion size and created a gap so that the clip could more easily fit the extrusion.
T-slot covers provide protection from debris buildup and can also be used to manage wires and cables recessed within the T-slot. They can also add a finishing look to your project. So... Since I couldn't really find what I wanted I made…
I adapted the great VzBot frame brace for my 3030 extrusions. Made it wider and added holes that fit M6x12 bolts. That would be the “medium” one, about 20cm long. Based on this one, I created a “short” (10cm) and a “long” version (29cm).…
My son is heavily in to World War 2 history weapons and attire and has already collected some amaizing pieces from that error. See below a link to his german Uniform MP40 and Luger I made for him. https://www.thingiverse.com/thing:2166568…
This model is compatible with the lego system.
Update! I made a new version with even more compatible extrusion types: https://www.printables.com/model/493621-aluminium-extrusion-nuts-and-t-nuts A set of easy to print and use nuts for 2020 and 3030 extrusions. There are 3 types:…
Perfect to add parts on your Prusa ;) enjoy
I have tried a few other T slot covers that I have found on here but non of them were satisfactory. So I drew one from scratch. This one is designed to flex in the middle, something none of the other ones could do. It will be a tight fit…
Created this Wago 221 holder to hold 2 terminal blocks so I could run my bed wiring to these and then to the mainboard. Lets me disconnect things easier and keep the electronics bay cleaner. Print with whatever you like how you like, just…
I needed a 3030 drop-in T-Nut with M3 bolt, the model from adrianishikawa ( https://www.thingiverse.com/thing:2762571 ) was great but it didn't turn properly in the 3030 groove. So i edit his model to add some chamfer and change the size…
This model is compatible with the lego system.
Update: Fixed the model, There was a small lip that went over the edge of alu extrusion, which made it impossible to clamp an object down on the alu itself ---------------- Needed some T-Nuts for mounting something on the Prusa Mk3, I…
drop in t-slot nuts with printed threads in 1/4 20 and m5 x .08 Print instructions i printed them at 0.1 in pla
No secrets for printing, infill 100%
3030 T-Slot Nuts - Collection - M4 M5 M6 Threads Suitable for: All our designs are free to download and use. Your support fuels our creativity, if you download/enjoyed this file, please leave a like. Thanks ***Warning: Dimensional…
This slide nut (or t-nut) fits perfectly into the Prusa MK3/MK3s extrusion profiles (Or any standard 3030 profile). It allows you to add attachments to your extrusions and is cheaper than an aluminium nut. Requirements: 1x M4 nut Print…
This model is compatible with the lego system.
This model is compatible with the lego system.
Needed some M3 drop-in nuts for 3030 extrusion since M3 is all I have on hand but couldn't find one to print, hence this. It seems to print best in the default orientation but YMMV. Hope you find it useful. Update: Added a version with a…
This model is compatible with the lego system.
This model is compatible with the lego system.
Inspired by https://www.thingiverse.com/thing:2843889 I used the one linked above for the Pi3, but needed an upgrade for Pi4 and decided to use a noctua 40x10 fan, as the new raspberry runs a little hotter. This can be mounted on any side…
Profile Connector 90° for 2020 / 3030 / 4040 V/T-Slot Profile Resize to adjust dimension s 30/09/2024 added Conn40x85x40mm M8.stl All our designs are free to download and use. Your support fuels our creativity, if you download/enjoyed…
Cable management solution for 40x40 or 30x30 Aluminium (aluminum) extrusion profiles. Mainy designed for Modetis "Typ-I" extrusion 8mm slots. "Typ-B" will also work, but fit slightly lose there. Different lenghts with cut outs to spare…
Remixed with round edges and a larger mounting hole to use a M5 screw and a T-nut. Fits Pi Camera V2 and V2.1 Print instructions Category: 3D Printer Parts Print Settings Printer: Hypercube Evolution Rafts: No Supports: No Resolution: 2…
A Great Design, but I needed one with less height. So this one is just 5mm high. I also added solid sides. Fits 3030 Extrusion Frame, with M3 Hex Nuts.
This is a mount for the Articulating Raspberry PI Camera Mount on the Prusa 3030 frame. I prefer my camera to show a stable background instead of being dragged upwards. My preference, sorry :) Please rotate the object on its side, I blame…
I drew a 3030 profile with a matching nut with an M5 thread. I printed with PLA on my MINI + - it turned out pretty well. Print as in the attached photo:
3030 Linear Connector for Tslot Aluminium Profile M4 Thread Two versions: Standard Type Reinforced Type Suitable for: ***Warning: Dimensional Tolerance Notice*** This connector is designed for our standard profile specifications and may…
Created for Prusa MINI with mini base to clip X-Axis cable out of the way of the filament tube.
This model is compatible with the lego system.
10mm pieces of 3030, based on Misumi's extrusions with some different hole layouts. I don't think infill or walls particularly matter because the thin parts will stay as they are. Print Settings Printer Brand: Monoprice Printer: Maker…
This is my version of the original BC-303 version of Daedalus made for the 8th season of SG-1. This version was unfortunately scrapped for the BC-304 Daedalus Class but we can actually see the top view of the original concept in the…
Yes, this is yet another Raspberry Pi case. Does the world need another case? Probably not. I really liked the 3030-mounted case from Coopey and thought the method of mounting via the 3030 extrusion slots was pretty sweet -- it was much…
Little cable clip that was designe by Vector3D in a lifestream but I could not find an online source so I copied the design and used it for my V-core 3 printer build. My RatRig V-Core3.1 comes with extrusione with an average thickness…
Při sestavování postupujte dle čísel jednotlivých dílů. Kola si nechte úplně na konec.
This is a remix of dhiltonp's battery holder that fits CR2450 and CR1620 batteries
Mandalorian Helmet - Low Filament @ 303g - Minimal Supports and Easy to Assemble My son really wanted a Mandalorian Helmet, all the other models I found were ether too much filament or too long a print (I dont like long prints that can…
3030 Tslot Aluminium Profile 4 sides open Adjust the Z scale to obtain longer profiles All our designs are free to download and use. Your support fuels our creativity, if you download/enjoyed this file, please leave a like. Thx
brick model of wall-e you can also size it to your need
Avoid scratches, reduce vibrations and increase friction by adding these covers as a leg of your aluminum 3030 profiles You can follow my projects on intagram: www.instagram.com/freckle3dprojects/
I wanted a mount for the Sneaks' articulating arm system that didn't require me to take apart pieces of my printer to slide the mount into the extrusion or require me to use screw and t-nuts. The mount can be easily inserted and removed…
PLAb System We all love our friends at ThorLabs, but sometimes you just need a part and you don't have the cash or time to wait for one to arrive with your order of Lab Snacks. A component of the growing PLAb Collection of 3D printable…
This model is compatible with the lego system.
3030 Extrusion with center hole. Length of 150 mm.
I love the simplicity of the design of the Raspberry Pi Camera v2 3030 2020 Mount. Only issue, was that my camera angle was extremely high using the LACK enclosure. I wanted to keep the same design, but provide an option to have it side…
Just a simple end cap for 3030 extrusion, other models did not fit into my extrusions. You need to rotate it to print it flat. Print Settings Printer: Anet A8 Resolution: 0.2 Infill: 25% Notes: Printed in PETG Category: 3D Printer Parts
So I made a new one in F360. First exported the profile from an existing MK3S model. Then created the T-slot nut for M3 DIN934. It was all easy and a 10 minute job. I printed the nut with PETG from “DasFilament”…
This model is compatible with the lego system.
T-Slot Connector Hidden Mount M4 Thread 3030 Aluminium Profile. Suitable for: Resize to adjust dimension ***Warning: Dimensional Tolerance Notice*** This connector is designed for our standard profile specifications and may not always fit…
Here are 3 Versions of T-Nut: "M3_heat-set_insert_T-Nut_3030_(4mm_hole)" is for M3 Brass Heatset Inserts - Short (ruthex or cnckitchen) “M3_heat-set_insert_T-Nut_3030_(4.6mm_hole)” is for M3 Brass Heatset Inserts - Short M3x5x4 (Voron…
BTT SFS V2.0 Smart Filament Sensor for 3030 with M6 bolt.
3030 Connector 3Ways Corner Bracket _Profile M4 Thread Suitable for: Resize to adjust dimensions ***Warning: Dimensional Tolerance Notice*** This connector is designed for our standard profile specifications and may not always fit the…
Cad model of the Genmitsu 3030ProVer max. This is a work in progress and some things aren't 100% accurate but the measurements for the frame are within +/- 2mm other components are somewhere in the +/- 5mm This is mainly being modelled to…
This is a remix / slight tweak of this thing: https://www.prusaprinters.org/prints/6041-raspberry-pi-4-case-3030-hanging-mount-for-prusa-m I extended the grid pattern to make a fan guard. Small things can still get past and hit the fan,…
This model is compatible with the lego system.
This model is compatible with the lego system.
I designed this for mains wiring up a 3D printer under the hood. The Voron SW uses 2 power supplys, and needs some wiring to be done. I could have used blades, and made a wire harness, but I wanted something I could easily take apart to…
This model is compatible with the lego system.
You will need to remove the main/heavy C920 swivel mount. This mount then replaces that maintaining the swivel but being easier to mount to an extrusion frame with M3 screws/nuts. To use a C920 you will probably need to open the webcam to…
I printed everything 0.20mm with 100% fill. The T-nuts and T-Bolts can be secured in a 3030 profile by turning them a quarter turn. Pay attention when tightening the nuts etc, tight is tight. The length of the screws are 8mm to tighten…
This is a mount to attach a GoPro to 3030 extrusion. I use it on my Hevo to record with my GoPro Hero 8. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: .2 Infill: 40 Filament: Atomic Filament PETG…
This is T-Nut for 3030 aluminium profile with inserted M5 metal nut.
This model is compatible with the lego system.
![[Remix] of Raspberry Pi 4 Case 3030 hanging mount for Prusa MK3/MK3s v-slot with 40mm fan](https://media.printables.com/media/prints/24475/images/245962_610157a6-7c25-496b-9d68-c4c234c70119/prusaslicer-2_1_1_-201912101508_based_on_slic3r.jpg)
