Wyniki wyszukiwania: 4080

Sortowanie

98 modeli

P
PrintablesPelice

Cable management for 4040 / 4080 extrusion profiles

Easy model to secure cable width a ziptie or a strap to extrusion profiles. Just rotate 90° the part into the profile and you are ready to fix the cables.

Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu

Pobrania
552
Polubienia
61
Ocena
0

Extruded aluminum profile 2020 2040 3030 4040 4080 8080 with T-nuts

Need the right profile fast? Just put it in a slicer, scale it as needed, and print! Included Profiles: 20x20 20x40 4H 20x40 30x30 40x40 40x80 80x80 These models are based on the MayTec® profile system. Update: I have designed some T-nut…

Pobrania
3654
Polubienia
1018
Ocena
3,5
P
PrintablesNouweland

SIM RIG END CAPS for aluminium profiles 4040, 4080 & 40120

*EDIT Some people ding the design to not fit exacly from what i found out not all 40x40/80x80 frames are exacly those dimensions i based the design on a Simlab frame. I took over my sim rig from a friend, but it was missing a few end caps…

Pobrania
1731
Polubienia
183
Ocena
4
P
PrintablesEIGA

FormD T1 v2.1 Anti-Sag Bracket 4080/4090 FE

What's this? As seen in my FormD T1 v2.1 video , this anti-sag bracket secures the 4080 or 4090 Founders Edition stock air cooler and eliminates sag. Configurations supported: 3 slot 3.25 slot 3.25/3 slot (top strut in 3.25 slot + 5mm…

Pobrania
1053
Polubienia
53
Ocena
0
P
PrintablesLevente Ritzl

FFBeast base w/ 4080 aluminium extrusion profile

Hello guys, this is a Fanatec clone designed base setup for the FFBeast wheel DIY project. On the backplate i used a XT60 socket and a Type-C USB port. I have a 2080 aluminium profile version too but i need a little time to finish it.

Pobrania
680
Polubienia
70
Ocena
5
P
Printablesbillsmithem

4040 / 4080 Aluminum Profile Cable Clip

Needed cable clips for my Next Level Racing GTELITE. Found one I liked but it didn't fit my 4040 profile, so I made my own from scratch, copying the same basic shape.

Pobrania
548
Polubienia
65
Ocena
5
P
PrintablesCharles

Cable guide/ cover for Simrig 4040 4080

Made it heavier and bulkier and modified the orginal to be suitable for T-slot 4040 and 4080 used for most simrigs. the longer ones are real nice to cover up the cable completely print them all standing up (I used petg)

Pobrania
478
Polubienia
68
Ocena
5
P
Printablesmafikes

Keyboard stand for sim rig 4040, 4080 etc.

Just easy keyboard stand with prepared holes to mount sim rig or elsewhere. I printed it with PETG and 4 perimeters. In slicer mirror model for right side. Please share your 3D Prints. Thank you 🙏

Pobrania
463
Polubienia
66
Ocena
5
P
Printablesr00k

4080 or 8080 simrig cable management

Flexible cable management for xx80 profiles. 200mm, 100mm, and 50mm for varied run lengths. Mostly intended for simpits but anything that uses xx80 profile and has cables can benefit. Saw a few other models for different profile sizes…

Pobrania
399
Polubienia
76
Ocena
5
P
PrintablesGreymanx

FormD T1 v2 Anti-Sag Supports for RTX 4080/4090 Founders Edition

This is a set of different supports and braces that can be used to prevent sagging of RTX 4080 & 4090 Founders Edition GPU's in the FormD T1 v2 (and v2.1). The two braces (short & long) attach to the case spine and provide support for the…

Pobrania
392
Polubienia
33
Ocena
0
P
PrintablesEIGA

FormD T1 v1.1 Anti-Sag Bracket 4080/4090 FE

New bracket for v2.0/v2.1 What's this? This is a PCI Rail attachment that I made for the FormD T1 v1.1 case, to be used with the RTX 4090 (and 4080) Founders Edition graphics cards only. It uses the existing SSD mounting holes of the T1…

Pobrania
338
Polubienia
27
Ocena
5
P
PrintablesJur

Sim Racing Seat With Tripple Monitor Stand 4080 Profile

Sim racing rig made with 4040 and 4080 aluminium profile and tripple monitor stand Category: DIY

Pobrania
322
Polubienia
35
Ocena
0
P
PrintablesYYGadget

SimRig 4080 2cm radius cable clip

This is a cable clip for a 4080 simrig to hold the larger cable sleeve. It clips onto the rig and stays put. Very small and fast to print so you can print several to help you guide the cable sleeve around your rig.

Pobrania
249
Polubienia
42
Ocena
5
P
PrintablesLanovar

Anker 7+3 port USB Hub Mount - 4080 profile

Versions: There are two versions you can download - one for sockethead screws and one for countersunk screws. The sockethead version will lock the hub in place with the screwhead. The coutersunk version wont. BOM: USB-Hub:…

Pobrania
244
Polubienia
66
Ocena
5
P
PrintablesYYGadget

SimRacing 4080 Rig holder

This simple holder will clip into a 4080 groove and will help support any device. I use it to keep the PSU in place (check photo) and the larger one to keep the portable keyboard.

Pobrania
199
Polubienia
52
Ocena
0
P
PrintablesRudy Martin

Aluminum Extrusion -4080 European Specifications

Aluminum Extrusion -4080 European Specifications

Pobrania
181
Polubienia
26
Ocena
0
P
PrintablesLucaMK

VKB Gladiator NXT 4080/4040 Profile mount

This is a simple mount for the Gladiator NXT to attach it to 4080 or 4040 profiles as used in Simrigs or table mounts. It substitutes the original baseplate. If used in connection with my side covers this can reduce the width of the base…

Pobrania
175
Polubienia
24
Ocena
0
P
PrintablesEIGA

Ncase M2 Anti-Sag Bracket 4080/4090 FE

The GPU mount uses the 4080/4090 Founders Edition M3 threaded holes hidden underneath the magnetic cover located at the front end of the card. The bracket attaches to the fan/radiator bracket of the Ncase M2 with M5 self-tapping screws…

Pobrania
168
Polubienia
12
Ocena
4
P
PrintablesMateusz Tokarz

T-Slot 4080 End Cap (3-Slot, Universal Fit)

BOM: Printed with ROSA3D High Speed PLA Signal Violet This is a universal 3-slot end cap for 4080 T-slot aluminum extrusion profiles , designed to securely cover the profile while keeping one rail open for functional access — perfect for…

Pobrania
166
Polubienia
21
Ocena
5
P
Printablestcatca
Pobrania
164
Polubienia
8
Ocena
0
P
Printablesvbence121

FFBeast 4080 raised assembly (No lathe necessary)

Update 2: Over Christmass break I was able to button up everything. Sadly I couldn't get the encoder to work (my encoder was not working correctly, the design is not the issue), so I switched to Tig33r's magnetic encoder design. Now…

Pobrania
153
Polubienia
18
Ocena
5
P
PrintablesTomek K.

4040 / 4080 Aluminum Profile Cable Clip - Tight fit

For vertical use I desined a slightly bigger Clip. It clips really tight and stays in place.

Pobrania
123
Polubienia
10
Ocena
0
P
PrintablesJohn Feagin

Winwing Takeoff Panel 4080 profile mount

Winwing Takeoff Panel 4080 aluminum profile mount using M8 bolts and 15mm heads. Printed with Sunlu Black PLA on and Ender 3 S-1. 4 wall lines and 40% Infill worked for me but can be changed to taste.

Pobrania
122
Polubienia
12
Ocena
0
P
PrintablesSergei

MSI 4080 Super ventus shroud

2x120mm 15mm fans; 2x120mm 25mm fans

Pobrania
121
Polubienia
5
Ocena
0
P
PrintablesJoe88

Nema 17 mount, Z-axis, 4080U, for Generic linear actuator

Nema 17 mount, Z-axis, 4080U, for Generic linear actuators made by QWORK, Twotrees, Befenybay and others sold on Amazon . This mount allows you to use a Nema 17 stepper motor on a linear actuator that is designed for a Nema 23 stepper…

Pobrania
111
Polubienia
8
Ocena
5
P
Printablesdcae808

Shifter bracket for 4080 simracing rig

Simple bracket for aliexpress-special simracing shifter. Screw holes are 8mm in diameter, shifter screw holes are 110mm

Pobrania
108
Polubienia
29
Ocena
0
P
Printablesdcae808

4080 cap

4080 aluminum rig cap

Pobrania
108
Polubienia
12
Ocena
0
P
PrintablesGreymanx

FormD T1 v2 GPU IO Cover for RTX 4080/4090 FE

The stock FormD T1 v2 GPU IO cover blocks part of the rear exhaust opening on the Nvidia RTX 4080 / 4090 cards. I designed this shorter cover to fill that gap and not impede the exhaust airflow. This cover is compatible with both 3 and…

Pobrania
106
Polubienia
13
Ocena
0
P
PrintablesMiko

SHH Thorn 4080 sidemount

Sidemount for SHH Thorn. Uses 6 or 8 m4x8mm screws for shifter side and 2 m8x16mm for rig side.

Pobrania
105
Polubienia
10
Ocena
0
P
PrintablesMateusz Tokarz

T-Slot 4080 End Cap (Universal Fit, Connector)

BOM: Printed with ROSA3D High Speed PLA Signal Violet This is a universal-fit end cap for 4080 T-slot aluminum extrusion profiles , designed to fit most common 4080 systems (Bosch, Item, Motedis, OpenBuilds, etc.). It can also be used as…

Pobrania
102
Polubienia
15
Ocena
0
P

Gleitmutter für Monster Tech Alu Profil 4040/4080 (T-Slot Nut for Monster Tech)

Gleitmutter für die Monster Tech Alu Profile für M4 Schrauben mit Sechskant Kopf. Ich empfehle der Stabilität halber bei der Struktur die Füllung auf 100% zu stellen.

Pobrania
101
Polubienia
16
Ocena
4
P
PrintablesM.Antas

4080 endcap

wolweiss perfil endcap printed at 0.2 mm

Pobrania
99
Polubienia
11
Ocena
5
P
PrintablesJoe88

Nema 23 mount, Z-axis, 4080U, for Generic linear actuator

Nema 23 mount, Z-axis, 4080U, for Generic linear actuators made by QWORK, Twotrees, Befenybay and others sold on Amazon . This mount allows you to use a Nema 23 stepper motor on a linear actuator from amazon Category: 3D Printing

Pobrania
95
Polubienia
11
Ocena
0
P
PrintablesDr.Nick

4080 Eckverbinder Corner Bracket M8 M6 M5 M4 in 3mm and 4mm

Eckverbinder für 4080 Aluprofile mit einer Wandstärke von 3mm und 4mm für M8 bis M4 Schrauben. Löcher sind in 8,2mm, 6,2mm, 5,2mm und 4,2mm Durchmesser Cornerbrackets for 4080 Aluminiumextrusions in 3mm and 4 mm thickness for M8 to M4…

Pobrania
95
Polubienia
13
Ocena
0
P
PrintablesMrNeedlemouse

VRS DirectForce Pro controller vertical mount for 4040, 4080 profile or IKEA BEKANT

UPDATE 2024-04-03: I added a version for mounting on 4040 or 4080 profiles with M6 or M8 hex screws and T-nuts. For printing the VRS-BOX_4080* files, choose “Split → To objects” in PrusaSlicer. Then arrange the printing orientation…

Pobrania
94
Polubienia
13
Ocena
0
P
PrintablesLucaMK

VKB STECS Mini 4080 Profile mount

This is a simple mount for the STECS Mini Throttle to attach it to 4080 profiles as used in Simrigs or table mounts. I recommend using the following hardware: 4x M4 threaded inserts 4x M4x10 countersunk head screws 6x M6x12 socket head…

Pobrania
91
Polubienia
20
Ocena
0
P
Printablesbillsmithem

Dead Pedal For 4080 Sim Rig

Simple foot rest. Printed PLA, 3 shells, 15% grid infill. Organic supports on the large holes. Print support on it's side, pedal flat. M8 screws and T-nuts to mount to extrusion. Two M3x20 screws to attach the pedal. 2026.04.20 Added…

Pobrania
91
Polubienia
19
Ocena
5
P
PrintablesTHERen

GoPro style mount for 4080 profile Aluminum Extrusion

GoPro mount for sim rig. Fits on a single rail of 4080 extrusion using 2x 8mm screws and 2x t-nuts. Will fit standard GoPro fasteners. I printed mine in PLA and its strong enough to hold 120mm fans with Noctua air amplifiers.

Pobrania
74
Polubienia
9
Ocena
0
P
PrintablesFiftyFifty

MSI Suprim X RTX 4080 4090 Deshroud bracket + shroud

This is a deshroud bracket designed for the MSI Suprim X RTX 4080 and 4090, featuring dual 120mm fans. It uses the original screws for mounting and requires only additional fan screws. For best results, use at least PETG or another…

Pobrania
67
Polubienia
9
Ocena
5
P
PrintablesHellAlex

Linear bearing upgrade 4080 C-beam

A friend of mine has decided to upgrade his printer with linear bearings for his hotbed. For the Y-axis it is used a 4080 C-beam. He asked me to design and print the plastic parts. Components available Version 1.0 increase the size of the…

Pobrania
63
Polubienia
11
Ocena
0
P
PrintablesJustdigit

USB Hub 10 Port bracket for 4040 4080 profile.

Mounting solution for USB Hub as for this model. https://nl.aliexpress.com/item/1005005071915803.html?spm=a2g0o.order_l

Pobrania
62
Polubienia
16
Ocena
0
P
PrintablesG10 by

4080 FFBeast (remix)

i suggest to refer to the original page of the project to get more info but i will update the description in the future to add more info about it. Update April 27: added universal mount and added space at the top to fit m5 nut. Update May…

Pobrania
61
Polubienia
2
Ocena
0
P
Printablesnotheotherben

Asus TUF RTX4080 GPU Support Extension

This model was designed to help increase the reach of the GPU support provided bu ASUS for their TUF RTX4080 graphics card. In a full tower E-ATX case, one may find that the GPU sits high enough off the bottom plate that the stock support…

Pobrania
58
Polubienia
4
Ocena
0
P
PrintablesSK Engineering

ITEM light 4080 3-way-connector left side

ITEM light 4080 3-way connector left side This 3-way connector for 4040 / 4080 profiles was designed for a DIY laser cutter project. It easily connects three ITEM profiles to each other, which can be attached with four M8 x 20mm inner…

Pobrania
56
Polubienia
17
Ocena
0
P
PrintablesEthu

FFBeast 4080 MKS Odrive Mini fixed mount

MKS original screws needs to be replaced for longer m3x16. Board is secured to the mount with 4 screws.

Pobrania
54
Polubienia
13
Ocena
0
P
PrintablesSophie

MSI Suprim X Liquid 4090 (probably 4080 too) AIO Radiator Tubes Comb

Wanted the suprim logo on my radiator tube comb so I embossed it in after sketching. May make a MMU compatible version once i get my other printer fixed, to allow the logo to be printing in a different colour instead of embossed.

Pobrania
53
Polubienia
3
Ocena
0
P
PrintablesMateusz Tokarz

T-Slot 4040 Dual Flat Connector (4080 Joiner)

BOM: Printed with ROSA3D High Speed PLA Signal Violet This model is a flat dual connector (4080 joiner) designed for 40×40 T-slot aluminum extrusion profiles . It allows you to join two 4040 profiles side-by-side to form a 4080-style beam…

Pobrania
51
Polubienia
10
Ocena
0
P
PrintablesSK Engineering

ITEM light 4080 3-way-connector right side

ITEM 4080 3-way connector right side This 3-way connector for 4040 / 4080 profiles was designed for a DIY laser cutter project. It easily connects three ITEM profiles to each other, which can be attached with four M8 x 20mm inner square…

Pobrania
49
Polubienia
16
Ocena
0
P
PrintablesHübin

Handbrake mount for 4080 aluminium sim rig

Suits the china USB handbrake and mounts on the side of an aluminium profile of 4080. Perfect for your sim rig. Just print in PLA with 25% infill laying on the side for best strength for those moments when ju have to save that drift. Have…

Pobrania
46
Polubienia
9
Ocena
0
P
PrintablesLWE

LG 34GN850 power supply sim rig mount M6 4080 profile

A simple mount to fix the power supply of a LG 34GN850 to your simrig or any 4080 aluminium profile. Print with Pla and use supports under the corners. Use DIN 912 M6x16 to mount to you rig.

Pobrania
41
Polubienia
7
Ocena
0
P

Rotating and Sliding Arm Rests for 4080 Extrusions

I created this armrest replacement after my Monstertech HOTAS chair mount interfered with my chair's existing armrests. I ordered extra 4080 extrusions and made my own adjustable armrests to replace the stock arms that came with the…

Pobrania
41
Polubienia
8
Ocena
0
P
Printablesmartin_pihrt

Holder Voltcraft LCR4080, VC830

Držák na stůl pro multimetry Voltcraft LCR4080, VC830 a podobné

Pobrania
41
Polubienia
4
Ocena
0
P
Printablesnfvguy

Panzerdose XXL https://www.thingiverse.com/thing:3154080

I just rescaled it for a friend. Not printed it myself. https://www.thingiverse.com/thing:3154080

Pobrania
36
Polubienia
1
Ocena
0
P
PrintablesMartin

DC/DC Buck converter case suitable for CR-D4080P

DC/DC Buck converter, voltage step down enclosure (case) suitable for CR-D4080P

Pobrania
33
Polubienia
1
Ocena
0
P
PrintablesToneDreams

Deshroud RTX 4080 Deshroud 120mm

Hi, This is a Deshroud mod for my Gigabyte RTX 4080 OC . It makes the GPU 4 PCIe slots tall, but it’s now quieter than the coil whine of my CPU. The mod reuses all the original shroud screws except one. For that one, you can either skip…

Pobrania
32
Polubienia
2
Ocena
0
P
PrintablesEmil Edholm

USB-hub mount for 4080 alu extrusion

Custom built mount for a very specific USB hub. I created it for mounting to a aluminum extrusion sim-racing rig. Prints fine with whatever settings, nothing fancy, no supports, no brim needed. The examples in the photos are printed with…

Pobrania
29
Polubienia
3
Ocena
0
P
PrintablesJR

L-Bracket (M6) for 4040/4080 ITEM Aluminum Extrusion

I needed a small and sturdy L-bracket as a rest for a large wooden board inside a frame made from 4080 aluminum profile. It prints fast and easy without any supports (if you orient it correctly) and uses a short M6 screw and a t-nut to…

Pobrania
26
Polubienia
5
Ocena
0
P
PrintablesManfred K.

2040 to 4080 connector

Hey, I designed this connector to join a 2040 extrusion profile with a 4080 extrusion profile. The reason was that I wanted a different base for the ‘Jo Presser – Threaded Insert Heat Press.’ The screws i used for the connection to the…

Pobrania
26
Polubienia
2
Ocena
0
P
Printablesaeberbach

Cooler Master NR200 front GPU brace for 4080 Super Ventus

I put a MSI Geforce 4080 Super Ventus 3x in a Cooler Master NR200. Tight fit! In this case the GPU sits horizontally and the card is very long and unsupported at the front. Because I will need to move this PC occasionally I made this…

Pobrania
24
Polubienia
3
Ocena
5
P
Printablesmikeev

4080 Profile Protection Layer (for lightweight profile)

Protection layer designed to slot-in to 4080 profile that is classified as "lightweight" (thinner structure). I originally designed this to slot-in to 4080 profile to act as a shelf for a computer attached to a monitor stand. I covered…

Pobrania
24
Polubienia
8
Ocena
0
P
PrintablesJeffrey

Q1R 4080 Quick Release

Printed on a BambuLab P1S with PLA with 0.2 layer height

Pobrania
23
Polubienia
3
Ocena
0
P
PrintablesBelder

IPad stand for 4080 table mount

Simple I Pad friction sleeve that can be mounted on top of 4080 aluminium extrusion used by Monstertech or others for mounting joysticks, throttles and other control devices. Create your own MFD using gameglass or similar app. Height…

Pobrania
20
Polubienia
3
Ocena
0
P
PrintablesFabTech

4080u nema 23 motor mount

Made this to properly space and support a nema 23 stepper on top of a 4080U linear motion unit from Amazon. https://a.co/d/iyIKNiq Coupler used was this anti-backlash “lovejoy” style connector. https://a.co/d/0nqUxjk Printed from Rakine…

Pobrania
18
Polubienia
2
Ocena
0
P

BUTTKICKER 4080 Universal Mount Remix

I ended up recreating the models from scratch. I fixed the scaling issues and updated the distance between the holes to 65 mm (Mounting points for BUTTKICKER 4080 universal mount post). I also reduced the length of the insert by 1 mm to…

Pobrania
18
Polubienia
1
Ocena
0
P
PrintablesEmoFu3D

PanelDue 7i Mount for Tevo Little Monster 4080

This is a modification to attach the panel to the side of the Tevo Little Monster. Print Settings Printer Brand: TEVO Printer: Delta (Little Monster) Rafts: No Supports: No Resolution: 0.3236 Infill: 50 Category: 3D Printer Accessories

Pobrania
17
Polubienia
0
Ocena
0
P
PrintablesSnafky

IFR1 Mount 4040/4080 Aluminium frames

A remix of this great model to mount is with M8 bolt on 4040 or 4080 frames (Sim Rigs)

Pobrania
15
Polubienia
1
Ocena
0
P
PrintablesCeeBee

Aluprofil 4080/40120/40160 Bohrlehre

Aluminium Profil (4080/40120/40160) Bohrlehre für eine zentrale 12mm Bohrung

Pobrania
14
Polubienia
0
Ocena
0
P
Printablesalexander v

Bosch hand mixer MFQ 4080 - locking mechanism

Designed after the original part, but simplified push buttons a bit. I've split model into three parts for better printing. Just connect them as on the picture, you may need to apply some force. In the attached .zip you can find FreeCAD…

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesBattooKooppu

4080 Extrusion Adjustable Corner Bracket

Just though I'd re-produce this corner connecting bracket for 4080/8040 extrusion. I use a lot of them for my sim racing rig and these are great when you only need to hold corner pieces together, but would rather not use your metal ones.…

Pobrania
13
Polubienia
0
Ocena
0
P
PrintablesBen Priest

4040 4080 Gap Strips

1 hour print 9 x 20cm strips

Pobrania
12
Polubienia
0
Ocena
0
P
PrintablesEmoFu3D

PanelDue 7i Mount for Tevo Little Monster 4080

Mount for this Cases https://www.thingiverse.com/thing:2981147 PanelDue 7i & 5i Cases with flexible mounts

Pobrania
11
Polubienia
2
Ocena
0
P
Printablesbillsmithem

Oculus 3 Kiwi Design 4080 Hanger

A 4080 hanger for the Oculus 3 with Kiwi Design head strap and my counterweight attached. This will likely not work well without the counterweight on the strap as it moves the CG to just behind the swivel points. The arm is attached to…

Pobrania
9
Polubienia
2
Ocena
0
P
PrintablesDarasi

M8 T-nut for 4080 aluminium extrusion (drop in)

You can drop this t-nut slot in, you don't have to insert it from the start of the extrusion. I originally made it to attach an accessory I made for my sim racing rig, which is made of 4080 aluminium extrusion. I had a lot of the M8 bolts…

Pobrania
8
Polubienia
1
Ocena
0
P
PrintablesFabTech

4080U to 80mm Spindle Motor Mount adapter

Made this to mount my 80mm spindle to a 4080U linear stage. https://a.co/d/b0uzuJw This is the spindle kit I used: https://a.co/d/38IEwVi I do not recommend using this with air cooled spindles. Even with water cooled spindles, I don't…

Pobrania
7
Polubienia
3
Ocena
0
P
PrintablesFabTech

Drag chain mount for 4080U linear stage

Mount a 40mm wide drag chain ( https://a.co/d/e08rkt0 ) to a 20mm series aluminum profile like the 4080U ( https://a.co/d/eSv96ip ).

Pobrania
7
Polubienia
1
Ocena
0
P
Printablesmafikes

Holder 2080/4080 AXAGON HUE-SA7BP 7-Port USB 3.0 CHARGING hub

Holder for AXAGON HUE-SA7BP 7-Port USB 3.0 for Alliminium profile Assembly: M8 screws for alliminium profile and nuts. Print Settings : I printed it with this settings from PLA and PETG-CF all good. Layer height 0.2mm If you need any help…

Pobrania
6
Polubienia
1
Ocena
0
P
PrintablesMegaIon

ASUS 4080 Noctua GFX support

Since I've a Lian Li SUP01 case combined with an ASUS 4080 Noctua edition I needed a GFX support for the front mount. This model is not perfect but it will secure to hold your ASUS 4080 Noctua GFX in place.

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesTip's PolyForge

Konica Minolta Door Interlock Switch Actuator (AccurioPress C3080 / C3070 / C4080)

This is a functional replacement for the safety door detection actuator (interlock switch key) on a Konica Minolta AccurioPress C3080 production digital press. When the standard OEM plastic tab snaps or bends, the press will throw a…

Pobrania
5
Polubienia
2
Ocena
0
P
Printableslogickiwi

Performax Self Leveling Laser PX-40801 LS-T2 Case

The little bag thing that came with my cheap self-leveling laser was terrible so I decided to make a simple 2 piece case for the laser, the mount, and the batteries. I've modeled in little supports for the battery area that can be cut out…

Pobrania
4
Polubienia
0
Ocena
0
P
PrintablesSWIZZ

ZOTAC RTX 4080 SUPER Replacement Back Shroud

This is a 3D printable replacement back shroud designed for the ZOTAC RTX 4080 SUPER graphics card. The primary purpose of this model is to make it easy to change the appearance of your GPU without permanently modifying the original part.…

Pobrania
4
Polubienia
1
Ocena
0
P
PrintablesAhmet ÖZASLAN

Gigabyte GeForce RTX 4080 16GB EAGLE OC / NZXT H9 Flow

Gigabyte GeForce RTX 4080 16GB EAGLE OC Anti-sag holder for NZXT H9 FLOW/Elite case to prevent pcb cracking issues.

Pobrania
1
Polubienia
0
Ocena
0
P

sim rig 4040 4080 cable sleeve holder

Use this to route cable sleeves around your sim rig, just twist in place and insert sleeve.

Pobrania
1
Polubienia
0
Ocena
0
P
PrintablesPoodle_B

MOZA SGP Shifter 4080 Profile mount

This shifter mount is for the MOZA Racing SGP shifter on a 4080 profile sim rig. It offers a sideways offset, which brings the SGP shifter closer to or farther from your seat. It requires six M8 screws and T-nuts to mount it on your rig,…

Pobrania
1
Polubienia
0
Ocena
0
P
PrintablesAnthony

Sim Rig iPad mount for 4040 (or 4080) aluminium extrusion.

iPad mount for 4040 aluminium profile. Made for my iPad Pro 11 inch (1st Gen)... But may fit others. The cradle part measures 8mm down into the groove, 525mm wide and 10mm deep so will fit whatever iPad, Android, phone etc that will go in…

Pobrania
0
Polubienia
0
Ocena
0
P
PrintablesD

Quick Release for 4080 profile (top)

Intended to mount a throttle or Joystick on top of a single vertical 4080 extrusion. Takes 2x countersunk M8 bolts and 2-4x regular M8 bolts.

Pobrania
0
Polubienia
0
Ocena
0
P
PrintablesD3Xt3R

Simucube Linkhub Mount for 4080 Extrusion

I Liked the original Design, but I needed a version for 4080 mounting with M8 Bolts

Pobrania
0
Polubienia
0
Ocena
0
P
Printables

2040 to 4080 connector

Hey, I designed this connector to join a 2040 extrusion profile with a 4080 extrusion profile. The reason was that I wanted a different base for the ‘Jo Presser – Threaded Insert Heat Press.’ The screws i used for the connection to the…

P
Printables

FFBeast 4080 MKS Odrive Mini fixed mount

MKS original screws needs to be replaced for longer m3x16. Board is secured to the mount with 4 screws.

P
Printables

4040 4080 Gap Strips

1 hour print 9 x 20cm strips

P
Printables

4080 FFBeast (remix)

i suggest to refer to the original page of the project to get more info but i will update the description in the future to add more info about it. Update April 27: added universal mount and added space at the top to fit m5 nut. Update May…

P
Printables

Bosch hand mixer MFQ 4080 - locking mechanism

Designed after the original part, but simplified push buttons a bit. I've split model into three parts for better printing. Just connect them as on the picture, you may need to apply some force. In the attached .zip you can find FreeCAD…

P
Printables

Virpil WarBRD mount for 4080 extrusion

This is designed to bottom mount your Virpil WarBRD base to a piece of 4080 (40mm x 80mm) aluminum extrusion using 4 M8x16mm bolts. I have been using these mounts for a few years now printed in PLA and have had so signs of weakness. but…

P
Printables

Keyboard stand for sim rig 4040, 4080 etc.

Just easy keyboard stand with prepared holes to mount sim rig or elsewhere. I printed it with PETG and 4 perimeters. In slicer mirror model for right side. Please share your 3D Prints. Thank you 🙏

P
Printables

SimRig 4080 2cm radius cable clip

This is a cable clip for a 4080 simrig to hold the larger cable sleeve. It clips onto the rig and stays put. Very small and fast to print so you can print several to help you guide the cable sleeve around your rig.

P
Printables

USB Hub 10 Port bracket for 4040 4080 profile.

Mounting solution for USB Hub as for this model. https://nl.aliexpress.com/item/1005005071915803.html?spm=a2g0o.order_l

P
Printables

Dead Pedal For 4080 Sim Rig

Simple foot rest. Printed PLA, 3 shells, 15% grid infill. Organic supports on the large holes. Print support on it's side, pedal flat. M8 screws and T-nuts to mount to extrusion. Two M3x20 screws to attach the pedal. 2026.04.20 Added…

P

Display Stand for LEGO Star Wars 40806 Gingerbread AT-AT Walker

Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…

Polubienia
3
Ocena
0
P
PrintablesWNelson

Virpil WarBRD mount for 4080 extrusion

This is designed to bottom mount your Virpil WarBRD base to a piece of 4080 (40mm x 80mm) aluminum extrusion using 4 M8x16mm bolts. I have been using these mounts for a few years now printed in PLA and have had so signs of weakness. but…

Polubienia
0
Ocena
0