2276 modeli
The WAGO terminals should have a tight fit and held in place by the mount. I put some text on the outside for the most common use cases in small electronic projects. In case you want to do this on your own, I uploaded a model without text…
Wydruk około 1,75 €–2,14 € nettoWstępna wycena jednego wariantu
A stackable, interlocking modular holder for vials and test tubes in accordance with ISO-4142-2002 standard. A single module dimensions are 90x90x50mm. One module has the following openings: 2 x 25mm (for tubes of diameter ⌀24mm) 6 x…
Wydruk około 2,52 €–3,07 € nettoWstępna wycena jednego wariantu
If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped Halter für 3-Fach Steckdose mit Ausschnitten für USB und Kabel. Kann mit Senkkopfschrauben hängend angeschraubt werden. Die Maße sind Breite = 54mm…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ich habe mich immer geärgert, dass das Eisfach des Thetford-Kühlschranks nicht offen blieb, wenn wir das Fahrzeug in den Winterschlaf geschickt haben. Natürlich geht auch ein Korken. Diese Ecke bleibt aber, wo sie hin soll. Mein…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Eine Verbindungsdose zum Verschrauben für 3 Stück Wago 221 2411 Durchgangsverbinder. Die Zugentlastung erfolgt mittels Kabelbinder. Kabel Durchmesser ca. 9mm Das Gehäuse ist anschraubbar und der Deckel kann mit M3er Schrauben oder 3mm…
Wydruk około 1,81 €–2,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Eine Verbindungsdose zum Verschrauben für 2 Stück Wago 221 2411 Durchgangsverbinder. Die Zugentlastung erfolgt mittels Kabelbinder. Eine Seite für Kabel Durchmesser 9mm , die andere für Kabel 4x6mm.
Wydruk około 1,70 €–2,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A relative had this contraption with two lamps and wanted to hide the WAGO terminal blocks: So I designed a simple, wall or ceiling-mounted junction box to split the two-pole 6mm x 3mm cable into two. It has a strain relief for all three…
Wydruk około 2,76 €–3,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sturdy VESA 100x100 Adapter to enable wall- or tablemounting for the MSI Optix MAG341CQ (German/ European Version, so check your monitors interface before printing, MSI seems to have at least one other version distributed in North…
Wydruk około 6,44 €–7,87 € nettoWstępna wycena jednego wariantu
Technic Beam 7 x 5 with Open Center 5 x 3 64179
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My own take on the very prevalent angled wago mount. This version has retainer lips on the rear side so the wago can't slide out. Also I think all the others are double mounts. If using this with high voltages or current, you should…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
My own take on the very prevalent angled wago mount. This version has retainer lips on the rear side so the wago can't slide out. Also I think all the others are double mounts. If using this with high voltages or current, you should…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
plastový držák - IKEA LOCK 16418 STROPNÍ SVÍTIDLO
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Due to the inner ring the shop vac hose can rotate freely (print in place)
Wydruk około 2,71 €–3,31 € nettoWstępna wycena jednego wariantu
(English below) Erweiterbare Mehrstockklemme für Klemmen WAGO 221-2411 zur Montage auf einer 35mm-Hutschiene: Diese Mehrstockklemme besteht aus einem Grundmodul, welches auf einer Hutschiene aufgerastet werden kann, einem Aufsteckmodul,…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
The original cap provided with the Wolfcraft 4195 precision knife frequently fell off, which inspired me to create a more secure replacement. This process eventually led to the design of a new grip that firmly secures the cap and offers a…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
Panel mount for XT60H-M connector. This variant was used on material that was ~ 0.625" / 15.875mm thick. Plug is a tight friction fit, installed from the back. The inner plate has just enough protruding to locate it in the hole and hold…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
This Braun blender came without a wall mount, so I made one. It holds the motor unit and whisker part. Printed in Prusament signal white PETG on the Prusa Mini. Supports for the holes, 0.15 layer.
Wydruk około 4,25 €–5,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an angled wall mount for the Klipsch R41M speakers (and possibly others) The angle is 34 degrees.
Wydruk około 4,71 €–5,76 € nettoWstępna wycena jednego wariantu
LR44 to LR41 battery adapter for my electronic caliper.
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Simple 2d design of the PPSH-41.I will make more guns if you want to suggest them let me know in the comments.
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
The model car shelf / display is designed for the 1:41 models what you can get from Shell. It has some space so you can put a slightly bigger car into it as well. The hole parameters: clearance, normal fitting, ISO M3 The track has only…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
A simple case to protect your spare Nitecore NL1416R battery when it's rattling around in the bottom of your bag while it's not in use. Cap comes on and off with a satisfying “pop!” Print with the open ends of the case and cap facing up.…
Wydruk około 0,86 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dyson DC25 upright vacuum wand cap, part number: 914114-01 modified from original design to fit the larger dc25 including cutout/alignment tab. Print tested at .8 nozzle with .4mm height. (.4 nozzle with .2mm provided as well). I like the…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This allows the quick reload of magazines for S&W Model 41 magazines. Just keep the arrow pointed forward so it will catch the follower block. Enjoy. I used a paint pen to color the arrow to make it easier to see. Have a lot of friends…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dust collection with 58mm attachment for vacuum. Replaces Dust Nozzle 416497-7 and has attachment for existing vs direct attachment of 58mm vacuum. Print Settings Printer brand: Prusa Printer: i3 MK3 Rafts: Yes Notes: I printed using…
Wydruk około 1,83 €–2,24 € nettoWstępna wycena jednego wariantu
This is a stand for the Mühle safety razor and brush. Recommend using organic supports.
Wydruk około 2,67 €–3,27 € nettoWstępna wycena jednego wariantu
I created this holder for the Wera 7400 torque wrench screwdriver. There are two separate models: Model 7440 with a torque range of 0.3-1.2 Nm Model 7441 with a torque range of 1.2-3.0 Nm You can find all the other holders and rails here .
Wydruk około 0,92 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This item can support your HK416D. Please don't let your beloved weapon lie somewhere, let it stand up and show it to your friends. Since private ownership of guns is not allowed in our country's laws, this is the parameter of 3D printing…
Wydruk około 12,63 €–15,43 € nettoWstępna wycena jednego wariantu
Bargraph Panel for TIPA PT041 - Audio Spectrum Analyzer . Holder for 80 LEDs in size 2 x 5 mm. Nothing special, but it might come in handy. :)
Wydruk około 2,45 €–2,99 € nettoWstępna wycena jednego wariantu
An ESP32-C3 and LD2410C enclosure for your ESPhome presence sensor needs! No hardware is required, and all parts can be printed in any filament you want (except probably carbon-impregnated filament, since that'll mess with your radio…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
This is a handle for the Daikin BRP069B41 WiFi-Adapter (for my air-condition). There is no space to mount the WiFi-Adapter inside of the air-condition. Mounting with double-sided adhesive tape have not been considered for optical reasons…
Wydruk około 2,53 €–3,10 € nettoWstępna wycena jednego wariantu
Engish below Deutsch: Ich habe eine Desinfektionsmittelflasche auf der ich einem größeren Sprühkopf montiert habe, Mein original Gewindeadapter ist aber leider nach und nach gebrochen. Natürlich wäre es wahrscheinlich einfacher eine neue…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: To indicate that the clothing or material provides protection against chain saws. DE: Hinweis darauf, dass die Kleidung oder das Material gegen Kettensägen schützt.
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
This is an experimental headlight guard designed specifically for the Royal Enfield Scram 411 with the original glass headlight . The purpose of this part is to add a lightweight barrier in front of the glass lens that may help reduce the…
Wydruk około 4,94 €–6,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description This is a two-piece hidden AirTag holder designed specifically for the Royal Enfield Scram 411 . It is made to fit behind the rear side plastic panel, under the passenger seat, keeping the AirTag completely hidden from normal…
Wydruk około 1,64 €–2,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You'll have to excuse the part names, I didn't know the correct technical term for most of them… I made this model as the others available online weren't all split by color and were over complicated in the number of parts (some containig…
Slim mount for Wago 221-41* wire connectors on the standard DIN rails. These models are perfect as leftover or wiping tower models. Update #20230417: added double and triple versions. Update #20240922: uploaded Fusion 360 source file.
Awesome model created by PaulElderDesign https://www.thingiverse.com/thing:1693443 You find PaulElderDesign over on Etzy I liked it so much I've scaled it up to fit my printer. I have stripped back the pieces to allow for easy printing in…
New for 4/24/24 - Minimal versions! Use the minimal versions to save time and filament if you don't intend to use a spacer. About The vertical mount supports nose-up or nose-down. The horizontal mount supports nose-left or nose-right. The…
Update 1: Small optimizations to the casing Added a small groove for lifting the lid Added some space inside on the back for potential cables Hello, here's a small project that I designed. I wanted to combine a small ESP32-C3 Super Mini…
Can be used for DIY RC Airplanes, education and more. If you want other models of NACA airfoils, feel free to comment. Included models; NACA-0012 NACA-0015 NACA-1812 NACA-2212 NACA-2312 NACA-2408 NACA-2412 NACA-4412 NACA-5416 NACA-7712
Please comment, rate, and post a make! Update 2/1/2024: I've added a new back with a ball joint to give better flexibility with printing a single back for multiple mounting options. A simple case for using an LD2410C radar sensors with an…
This model is compatible with the lego system.
Why? I needed adapters to mount the Wago 221 series connectors to 2020 AND 3030 extrusions. I wanted them to be modular in size and space efficient. Those adapters are a remix of the following models:…
DIN Rail Mount for Wago 221-412 (2-conductor), Wago 221-413 (3-conductor), Wago 221-415 (5-conductor) and Wago 221-420 (10-conductor) as well as mixed Connector mounts. Includes Models where the wago opens to the left (Models ends with L)…
This is a Wago 221-415 Mount for my DIN Rail Bracket. You can find the bracket here ! There are several versions, for 2, 4, 6, 8, 10 and 12 Wagos. STL and STEP files are without labels and can be edited to your needs. For the DIN Rail…
NACA Airfoil 2412. I use this for a test print for new materials or different settings. Uses surprisingly little filament for its size. Print instructions Suggested settings: one perimeter zero top and bottom layers gyroid infill 15%
⚫ Zetor 6341 ⚫ This is the last model for the year 2023. Expect a new models in 2024 Follow me on YouTube for more info about what you can look forward for. :-) Zetor 6341 is the last tractor I will make in foreseeable future. At least…
When I printed the “wago” mount for my Voron 2.4 build, I found my connectors did not fit the slots on the model. I realized the clips I had were knockoffs and not Wago by brand, however even the measured size of the slots is smaller than…
This model is compatible with the lego system.
Wago mounts I needed a mount with two sections so I could join multiple fans on tha same line for The Filter project, while original had only three sections variants. I also chaged the model cosmetically a bit. Wago Splitter I've also…
This model is compatible with the lego system.
Case to hold a LD2410 MMWAVE sensor module and a Wemos D1 mini board. The radar module can be rotated horizontally to adjust the angle and direction it is sensing. Four parts: The case that holds everything A holder for the radar module.…
This model is compatible with the lego system.
UPDATE: Added a “R2” version which allows the Wago's to be opened while mounted. It was the only complaint I've seen with this. I adjusted the rotation of the mounts, and slightly redesigned the overall holder. The centre Wago might be…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** For Makita LXT 18V Tools only: This is a tool holster and organizer designed for…
Video demonstrating the touch controls / adjusting brightness https://www.youtube.com/watch?v=x7zqOPEqBCw This project is for the 2.8" ili9341 TFT LCD and Touchscreen . The ESPHome code for this project, which is a clock showing inside…
This model is compatible with the lego system.
This model is compatible with the lego system.
WAGO 221-413 and 221-613 Mount (3 x 2) Item no. 221-413 Connection technology CAGE CLAMP® Actuation type Lever Connectable conductor materials Copper Nominal cross-section 4 mm² / 12 AWG Solid conductor 0.2 … 4 mm² / 24 … 12 AWG Stranded…
This model is compatible with the lego system.
Model for mounting 3x WAGO 221-2411 Inline Connector to standard DIN rail. Best printed on side for strength.
Thanks to LoserKid418 for adding access to the OnShape object for his original design! I'm in the process of learning Fusion 360, so I used his original object as a reference to remake it in F360. This is the first thing I've created in…
I designed this simple DIN rail mount to hold three WAGO 221-413 connectors . With a height of just 9.2 mm , two mounts fit into 1TE (the width of a standard European circuit breaker). It snaps firmly onto the rail and can be released…
Remix of OV1A creation. Liked the snap fit and clean design.
This model is compatible with the lego system.
Please comment, rate, and post a make! Update 1/19/2024: I've added a new back with a ball joint to give better flexibility with printing a single back for multiple mounting options. A simple case for using an LD2410C radar sensors with…
Important! Rules and regulations regarding electrical installations and devices vary significantly between countries, please make sure that you comply with any local regulations that may be relevant. The design is intended for use with a…
Important! Rules and regulations regarding electrical installations and devices vary significantly between countries, please make sure that you comply with any local regulations that may be relevant. The design is intended for use with a…
This model is compatible with the lego system.
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and i think every…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Hier ein Ersatzteil für verschiedene Bausätze. Kompatibel mit LEGO® Technic 7M / 7L 4211805/44294194/44294 - 55mm lang
Small surface mount box, for hiding cables and wago connectors - just shorter Please use low-current sensor and signal wires only . It is not suitable for mains wiring due to potential safety risks and regulatory non-compliance.…
Build Guide: https://props3d.pro/aliens-pulse-rifle/ Join me and fellow prop makers on Discord and join in some build projects: https://discord.gg/NGWhc6a3Gv Note that like most of my things they're iterative. I'm an eternal tinkerer and…
YJ board CH341A Serial/Memory Programmer Enclosure YJ board CH341A Pro Serial interface / Memory Programmer Case with exposure of ZIF socket and DuPont connectors. The enclosure holds the board snugly. Led Light pipes optional part but…
This model is compatible with the lego system.
This model is compatible with the lego system.
🧱Lego Duplo Brick 2x8 #4199🧱 RICORDATI CHE OGNI PERIODO DI GIORNI PUBBLICHIAMO I NUOVI PROGETTI (ANCHE LEGO) QUINDI ISCRITIVI,👤 SCARICA⬇ E LASCIA UN LIKE👍. REMEMBER THAT EVERY PERIOD OF DAYS WE PUBLISH NEW PROJECTS (ALSO LEGO) THEN…
In order to wire the controller fans of my voron I used wago terminals. I wanted to have the style like the ones that are used for mains voltage. That's why I used this design as template and adapted it for two wago terminals.
MAR 2025 update: tweaked the base auto grip files and solenoid core parts to work with the fileset. Extended parts that needed it. DEC 2024 update: Minor tweaks, added a grip/receiver combo that can be pinned together rather than screwed…
WAGO 3-way junction box. Suitable for 3-wire cables with a maximum cross-section of 1 mm². The cover is attached to the box using four thermal inserts with M2 threads. The screws require 5 mm.
The 4mm 3 wires Wago connector is a useful electrical fitting. Often, it needs to be secured to a base plate. Wago do have base clips, but inconvenient to get hold of. Here is my design for a quick solution. In addition to the Wago…
I split WAGO holder from VORON Trident assembly in CAD, for segments to be added or removed as desired. I needed mount for 2x and 5x WAGO 221-412. Fusion 360 file is available to edit according to your needs. Move segments 15.5 mm to…
How to print. For engine use recommended ASA or ABS any other high heat resist material. Might get away with PET since its off on top of the motor. (still it is your throttle body, be responsible) And test test test. Make sure when you…
Update: Die 3er Variante wurde hinzugefügt. Update: Die 4er und 5er Varianten waren fehlerhaft und wurden nun korrigiert. Update: Ich habe noch eine 5er Variante hinzugefügt. Update: Ich habe noch eine 4er Variante hinzugefügt. Ein…
The official Cisco part for wall-mounting 7800-series IP phones has been getting increasingly scarce and expensive as of late, so I set out to make a 3D-printed alternative for use at work. Additional Materials Needed: - 2x M3x6 machine…
Recently my family decided to remodel some parts of the house, that included cutting some walls using a grinding disk. In order to create channels to hide power cables in. I purchased a DeWALT DWE4156 along with a wall cutting disk, I was…
Important! Rules and regulations regarding electrical installations and devices vary significantly between countries, please make sure that you comply with any local regulations that may be relevant. The design is intended for use with a…
This model is compatible with the lego system.
This model is compatible with the lego system.
A compact snap-on holder designed to mount three WAGO 221-415 connectors on a standard 35 mm DIN rail. Ideal for clean, tool-free installations in control cabinets, automation projects, or DIY setups. This version fits only the 5-port…
This model is compatible with the lego system.
Spliced together a few different files to fit my own requirements. You may need to re-size/check the carrier dimensions depending on your own ESP32 board. I designed this to use with Jumper cables, i didn't have a screw for the DHT sensor…
Description: Build your own high-precision indoor air quality monitor! This project uses the industry-standard Sensirion SCD41 sensor paired with an ESP32 to track CO2 levels, temperature, and humidity. It is fully integrated with Home…
This model is compatible with the lego system.
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
