Wyniki wyszukiwania: 49mm

Sortowanie

121 modeli

Lens Cap 49mmØ

Hey there :) Step 1: Load the files into the slicer Or you use the prepared gcode, just look at the requirements Step 2: Correct the orientation of the models: The FRAME is printed with the Logo facing down and the bridging should be from…

Wydruk około 0,95 €–1,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
332
Polubienia
43
Ocena
4,2
P
PrintablesStampBoutique

49mm lens cap with flaps

49mm lens cap with flaps for easy screw and unscrew.

Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu

Pobrania
166
Polubienia
6
Ocena
5
P
PrintablesLXO

49mm lens cap

A 49mm lens cap that I made. Works great with my Sony lenses. Be careful to use this lenscap with too rounded lenses as the backside of this lens cap is flat for easier printing. I made a lite version, see "49mm_lenscap_V3_lite.stl" which…

Pobrania
3007
Polubienia
201
Ocena
4,76
P
Printablesmodsmthng

blind shaker : donut 58mm 57mm 54mm 51mm 49mm Flair Pro 2 (45.5mm) Flair Classic (Donut espresso shaker / donut espresso shakr)

The Donut Espresso Shaker is an espresso shaker that enables even distribution when preparing espresso for a wide range of portafilter sizes. What makes the Donut Shaker special is that it achieves this result with any portafilter size…

Pobrania
1824
Polubienia
208
Ocena
4,91
P
PrintablesSpotmatic

Lens hood 49mm (push on)

A lens hood for your 50mm lens (filter diameter 49mm). No thread - just push on. Use the Fuzzy Skin option in PrusaSlicer if you wish. No support required. Paint the interior matte black. Do you like it? Please consider to buy me a cup…

Pobrania
897
Polubienia
112
Ocena
5
P
Printablesrumer

Square Lens Hood 49mm (Helios 44-2)

Square lens hood for Helios 44-2 (or other Lenses with 49mm thread) !!! I've tested the Vignetting on an APS-C camera not sure if it works on FF !!! Print Settings Printer Brand: Creality Printer: Ender 3 Pro Supports: Yes Resolution: 0.2…

Pobrania
467
Polubienia
29
Ocena
5
P
Printablesnbrlt

Lens filter adapter 49mm to 52mm

A simple filter to adapt 49mm lens filter to 52mm lenses. Threads are 49x0.75 and 52x0.75. Avoid tightening the filters too much, it might be difficult to remove after (remove the 49mm filter first). Print at 0.1mm layer height for best…

Pobrania
339
Polubienia
17
Ocena
5
P
PrintablesElanaut

49mm Lens Cap

This is designed to replace a broken Sony 49mm lens cap but may be able fit other lens with the same diameter, as long as the lens curvature is fairly flat. This can be printed as one piece with a fair amount of bridging, or as two pieces…

Pobrania
277
Polubienia
24
Ocena
5
P
PrintablesHairyNoodleArms

49mm Lens Cap

I wanted a thin lens cap for my Fujifilm X100 that has a lens hood so I can put it into a case I bought easier without stretching the case so much. I imagine it would work for other cameras that accept a 49mm filter thread as well.

Pobrania
266
Polubienia
16
Ocena
5
P
PrintablesFred.call

Lens cap holder 49mm-58mm-72mm

Voici un lens cap holder, qui permet d'y clipser ces bouchons d'objectifs d'appareil photo. Très pratique car il s'adapte à la sangle canon par exemple. Les diamètres de bouchons acceptés sont 49mm pour le plus petit, 58mm pour le second…

Pobrania
244
Polubienia
52
Ocena
4,67
P
Printablesnbrlt

Lens filter adapter 49mm to 55mm

A simple filter to adapt 49mm lens filter to 55mm lenses. Threads are 49x0.75 and 55x0.75. Avoid tightening the filters too much, it might be difficult to remove after (remove the 49mm filter first or use the handle version). Print at…

Pobrania
242
Polubienia
11
Ocena
0
P
PrintablesMohammadAG

Lens Cap Holders (49mm & 67mm, 55mm & 67mm & 82mm)

Two lens cap holders I printed using the remixed parametric design. The lens caps are for my Sony 20mm f1.8 G lens, Tamron 28-200, and Sony 55mm f1.8 Zeiss. The second (triple) lens cap is for a friend who has a Sony GM 24-70 GM I, Sony…

Pobrania
218
Polubienia
24
Ocena
5
P
PrintablesRatasich

Step-Down-Ring 55-49mm (Filteradapter)

I designed this step-down-ring to be able to attach a ø49mm variable ND filter to my vintage 50mm Minolta lens with a ø55mm filter thread. Attaching this setup to an APS-C camera does not cause any vignetting.

Pobrania
200
Polubienia
18
Ocena
5
P
PrintablesSpotmatic

49mm & 52 mm Hasselblad filter adapter

This adapter will allow you to use your 49mm or 52 mm filter on a Hasselblad lens, having a B50 bayonet. In addition, you can still use the original lens hood without interference. Print instructions Category: Camera Print Settings…

Pobrania
188
Polubienia
18
Ocena
0

46mm to 49mm Camera Filter Threaded Adapter

This is a 46mm to 49mm threaded adapter for putting a 49mm threaded lens filter on a 46mm threaded lens. 46mm threaded lenses are common in the micro four thirds system. Many Panasonic Lumix and Olympus lenses feature 46mm threaded front…

Pobrania
188
Polubienia
1
Ocena
0
P
Printablesjkim_makes

Self leveling tamper, funnel and base for Pre-mil La Pavoni Europiccola (49mm) Espresso Machine

A self leveling tamping station designed for the 49mm basket of a pre-millenium (generation 2) La Pavoni Lever Espresso machine. The basket sits flat in the base and the funnel screws on top. The funnel was designed with a straight…

Pobrania
185
Polubienia
27
Ocena
5
P
PrintablesJulian Holl

Umikot V2 Pre Mill La Pavoni (49mm)

The tolerances should allow it to be used with needles that have the metal or the rubber handle. With needles that have a <20mm handle and a needle length of 40mm (without the handle) there is no need to cut the needles. The files contain…

Pobrania
185
Polubienia
18
Ocena
4,5
P
Printablesantlers

49mm filter adapter for OM System TG-7 / Olympus Tough cameras

This is a relatively low profile 49mm filter thread adapter for the OM System TG-7 and other Olympus Tough cameras. This lets you use the same filter size as you might use on a Ricoh GRIII, which can also use the same batteries……

Pobrania
170
Polubienia
12
Ocena
5
P
PrintablesMatten79

Sony lens cap holder for 40.5mm and 49mm

I bought the kit with the telezoom lens. So I needed a lens cap holder for both 40.5mm and 49mm. I could not find a solution so I created this. Print instructions Category: Sport & Outdoors Summary I bought the kit with the telezoom lens.…

Pobrania
153
Polubienia
30
Ocena
5
P
Printablesantlers

Low profile 49mm threaded lens hood

This is a low profile 49mm threaded compact lens hood/shade with a few versions. I recommend printing at 0.10mm layer height in PLA for best results with the threads, but it should be fine at 0.15 too. Fuzzy skin modifier makes it look…

Pobrania
150
Polubienia
13
Ocena
0
P
PrintablesDJ

Harley Davidson Action Cam Mount / Halterung - 41mm / 49mm Gabel / Fork (GoPro, ApexCam, Akaso, DJI, etc.)

I got an action cam for the motor bike, but the mounts that came with the cam doesn't fit very well at the bike and to be honest I do not trust them. So I created some new mounts for the action cam. I think the holder should be identical…

Pobrania
147
Polubienia
25
Ocena
0
P
Printablesapkhou

Dyson Nozzle Long Thin - 249MM LONG

made the nozzle a bit shorter so that it can be printed on a bambu lab x1 or p1 series (height 248.88mm)

Pobrania
147
Polubienia
12
Ocena
5
P
Printablesyukosteel

Fuji X100V / X100VI camera filter adapter 49mm - angular version II

Fuji X100V / X100VI camera filter adapter 49mm - angular version II Model is designed from scratch using BoltFactory Blender plugin. Adapter outer walls are tilted to the same angle the stock lens has, so it better fits overall style of…

Pobrania
143
Polubienia
8
Ocena
5
P
Printablescottec

Umikot V2 - 49mm La Pavoni Mill Pre Mil & ROK Espresso - Properly done

Using same needles and same countersunk bolts. Trim needle handle to 7mm and add 20 and 30mm for the actual needle. No mods beside needle positions to make them work when scaled. Will work with standard 49mm Pre Mil La Pavoni and IMS…

Pobrania
141
Polubienia
16
Ocena
5
P
Printablesyukosteel

49mm filter adapter ring for Fujifilm X100V X100F X100T X100S X100 camera

UPDATE [2024-04-26] : Designed improved adapter angular version II 49mm adapter ring for Fujifilm X100 series cameras. UPDATE 01-02-2024: Added V2 with more smooth walls. Remixed the source adapter by doubling its 49mm thread to other…

Pobrania
140
Polubienia
19
Ocena
0
P
PrintablesKaJashey

Instax Mini Evo Filter adapter 49mm

Allows you to use 49mm lens filter on an instax mini EVO camera. You can use colored filters, or a UV filter, or close-up filters, or a lens hood, or a step up ring. I print with organic supports to hold up the inner edge. Easier to pull…

Pobrania
139
Polubienia
30
Ocena
0
P
PrintablesJa Hey 64

52mm Lenscap (should also fit 49mm and 55mm with scaling)

This Lens cap is designed to be printed without supports at 0.15mm layerheight and has some tight tolerances so the locking mechanism most likely has to be broken loose wich is best done by carefully bending the parts in different…

Pobrania
134
Polubienia
12
Ocena
5
P
PrintablesSpaceWalk

Lack Enclosure Threaded Filament Passthrough Guide (49mm-59mm Table thickness)

Threaded two part filament guide designed to pass through the top of an IKEA Lack table. Simply use a 1 inch hole saw to drill the hole for it to pass through, I had to shave the hole in the table a little bit with an exacto to make it…

Pobrania
132
Polubienia
28
Ocena
5
P
PrintablesLewyMistrz

adapter sony a reverse 40.5mm 49mm 52mm 55mm

tolerances are tight, you may need to little file sony a mount or adjust z height for couple percent. for me it printed fine.

Pobrania
129
Polubienia
6
Ocena
0
P
PrintablesMaksim

ND Filter 49mm Holder for iPhone 16 pro

K&F Concept Nano-D Filter 49mm Holder for iPhone 16 pro

Pobrania
123
Polubienia
9
Ocena
0
P
PrintablesLinus1997

43mm, 46mm and 49mm to 39mm step down/up filter lens ring for Alum Panomicron v2 Adapter

A handy ring that adapts 43mm, 46mm and 49mm threads down (or up) to 39mm, designed to fit the Alum Panomicron setup. It prints well with a 0.4mm nozzle at 0.12mm layer height, providing clean threads and a snug fit. Ideal for switching…

Pobrania
116
Polubienia
5
Ocena
0
P
PrintablesHankDruck

49mm magentic lens filter case

This is a magentic lens filter case for 49mm Filter. Customized version of https://www.thingiverse.com/thing:43781 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=43781 All credits got to:…

Pobrania
116
Polubienia
7
Ocena
0
P
PrintablesMartin R

Sony 49mm lens cap spring

This is a remix of a very good model, I had to adjust it a little to work for my 49mm lens element cap. Many thanks

Pobrania
114
Polubienia
8
Ocena
4,75
P
PrintablesKB2QQM

49mm Lens Hood with threads-Wide Angle

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/lakqtHH3Esh Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Yes Supports: No Resolution: .16 Infill: 20 Filament: eSun PETG Black…

Pobrania
114
Polubienia
3
Ocena
0
P
PrintablesSteph ANTHONY

lens cap 49mm

lens cap for a 49mm diameter lens Printable in 4 pieces in any material

Pobrania
112
Polubienia
9
Ocena
5
P
PrintablesPrettyFlyPrints

Clip for 49mm/67mm camera lens cap.

A clip to hold your 49mm/67mm lens cap, for your camera backpack strap, jacket, belt or pocket. I edited the lens cap buckle to be more minimalist and compact, and combined with the clip to be printed on its edge without supports.…

Pobrania
98
Polubienia
19
Ocena
5
P
PrintablesLeon Jiang

Camera Filter Adapter Ring 40.5mm to 49mm

This adapter ring works with standard camera filter threads (~0.5mm depth, 0.7mm pitch). It adapts smaller diameter filters to work with larger diameter threads. The thickness is as low as possible to reduce optical problems. Since there…

Pobrania
97
Polubienia
2
Ocena
4
P
Printablesyukosteel

49mm to 52mm filter adapter for Fuji X100V / X100VI camera - angular version II

49mm to 52mm filter adapter for Fuji X100V / X100VI camera - angular version II This model is allowing to use more common 52mm filters on Fuji X100 series cameras. Model is designed from scratch using BoltFactory Blender plugin. Adapter…

Pobrania
96
Polubienia
10
Ocena
0
P
Printableskleenecks

49mm to 58mm Step Up Ring Filter Adapter

Low profile 49mm to 58mm step up ring with tabs for leverage. Printed for use with Helios 44-2 or any other 49mm filter size lens. Standard lens m.75 thread pitch.

Pobrania
92
Polubienia
6
Ocena
0
P
PrintablesBradley Norman

Olympus XA 43mm/49mm lens attachment

This lens holder is designed specifically for the Olympus XA rangefinder camera. It accommodates a 43mm filter, which minimally obstructs the lower portion of the viewfinder, ensuring accurate framing while taking photos. The design…

Pobrania
85
Polubienia
14
Ocena
4
P
PrintablesDamian Penney

65/49mm Spindle Tool Mount for the LowRider 4 CNC

Tool mount for a 65mm VFD spindle

Pobrania
82
Polubienia
6
Ocena
0
P
Printablesblechbude

Filterdose 49mm Filter Filterbox Fotofilterbox photographic filter box

Dose zum schrauben für Fotofilter mit 49 mm Durchmesser. Die Dose hat innen einen Durchmesser von 52 mm und eine freie Höhe von 12 mm. Eventuell innen mit Schaumgummi oder Velour auskleiden damit der Filter nicht klappert. Gedruckt mit…

Pobrania
81
Polubienia
16
Ocena
0
P
PrintablesSkullKill

Sink Strainer 49mm 50mm with Retaining Tab

Migrating from thingiverse https://www.thingiverse.com/thing:4362313 Original here https://www.thingiverse.com/thing:3797754 Added the retaining tab to prevent it from sliding out. happens when trowing large amount of water. especially…

Pobrania
81
Polubienia
6
Ocena
5
P
PrintablesPhilip Stanz

Minolta 49mm Lens Cap Spring

This is a replacement spring for a Minolta 49mm lens cap as found on my Maxxum Lenses. This will replace a broken spring and should be printed with 100% infill and in PETG for the flexibility. I've tested this in a Maxxum 35-70mm Lens as…

Pobrania
79
Polubienia
11
Ocena
0
P
Printablesfelixfive

Funnel for 49mm Baskets (Olympia Cremina, La Pavoni) - Dosing and Tamping

A simple funnel for 49mm baskets that are used by the Olympia Cremina or older La Pavoni models. The funnel sits well on my 14g baskets without the need for magnets. It allows for WDT and tamping for minimal mess in the kitchen :) Printed…

Pobrania
76
Polubienia
9
Ocena
4
P
PrintablesDeeDee

Lens cap with 49mm thread

Thread with a layer height of 0.1 mm

Pobrania
74
Polubienia
9
Ocena
5
P
PrintablesGarboTec

Canon E49 Lens Cap Holder (49mm)

Hello :) Today I have a new 3D model for you. I made a lens cover cap because I didn't like the alternatives here and some of them didn't offer a secure hold of the lens cover. This lens cover fits the most common covers with a diameter…

Pobrania
74
Polubienia
14
Ocena
0
P
Printablesyong3dprint

Canon M50 Stock Lens Cap 49mm Holder

Canon M50 Stock Len's Cap holder for Stock Lens 15-45mm. Will not drop or lost your Len's cap again! Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2mm Infill: 80 Filament: Any PLA Brand…

Pobrania
66
Polubienia
12
Ocena
5

Lens filter adapter 49mm to 52mm

External thread: M49x0,75 Internal thread: M52x0,75 Tested with basic PLA, no support, 0,4mm nozzle, 0,2mm layers

Pobrania
65
Polubienia
2
Ocena
0
P
PrintablesKevDoy

49mm Lens Hood

A lens hood for 49mm lenses. Tested on Minolta DiMage 7i but may be compatible with additional models (and brands) using 49mm lens.

Pobrania
63
Polubienia
6
Ocena
5
P
Printablesyukosteel

49mm to 52mm filter adapter for Fujifilm X70 camera - angular version II

49mm to 52mm filter adapter for Fuji X100V / X100VI camera - angular version II This model is allowing to use more common 52mm filters on Fujifilm X70 cameras. Model is designed from scratch using BoltFactory Blender plugin. Adapter is…

Pobrania
60
Polubienia
2
Ocena
0
P
PrintablesHomSupLo

Umikot V2 for SWORKS 49mm Step Down Basket

Remixed Umicot to fit the SWORKS 49mm Step Down Basket. Umikot will sit on top a standard 58mm Portafilter basket with gears and needle positions adjusted to WDT the inner 49mm area. -Required hardware and Print Properties are the same as…

Pobrania
58
Polubienia
11
Ocena
5
P
Printablesmakes_b

PVS-14 Camera Adapter 49mm

Adapter which uses a PVS-14 eyecup retainer ring to mount to camera objectives which use standard 49mm filter threads, such as the Canon EF-M 15-45

Pobrania
57
Polubienia
6
Ocena
5
P
PrintablesMiles L

SRAM DUB 44mm to 49mm bottom bracket adapter

Originally posted by rzschokke on Thingiverse: Use this to adapt a 44mm, 12 spline bottom bracket socket tool (such as Park Tool BBT-79) to a 48.5mm bottom bracket. I already owned a BBT-79, but when I replaced my SRAM DUB BB with…

Pobrania
57
Polubienia
5
Ocena
0
P
PrintablesJNAbbott21

49mm Fork Seal Driver

Basic but functional fork seal driver for 49mm fork tube found on Harley touring models. Design is 2 parts the driver body that has a hollowed upper section to fill with media to add weight. I used steel sand blasting media then glued the…

Pobrania
55
Polubienia
5
Ocena
0
P
Printabless1ugh34d

50T HPI gear 49mm Diameter

50T Gear for a Nitro car spur gear

Pobrania
51
Polubienia
3
Ocena
0
P
PrintablesMGA

Coinholder for 49mm case

I printed it with 250mm/s and a 0.3layer

Pobrania
51
Polubienia
2
Ocena
0
P
Printablesiohn

49mm lens hood with cap/cover

The hinge is held together with a steel wire and the end covers superglued on.

Pobrania
45
Polubienia
5
Ocena
0
P
PrintablesGyörgy Csorba

umikot 49mm version

umikot 49mm version

Pobrania
44
Polubienia
3
Ocena
0
P
PrintablesAlex

49mm camera lens cover

49mm camera lens cover

Pobrania
43
Polubienia
4
Ocena
0
P
Printablesvidision

Apple Watch Strap Holder (49mm)

Basic watch strap holder for my 49mm Apple Watch Ultra 2. Compatible with the titanium watch band from Nomad as well. It has one centered hole for a screw to mount it to the wall. I'll add a hidden screw mountain in the next version.

Pobrania
36
Polubienia
2
Ocena
0

Minolta 49mm lens cap clip

When I got my camera, it came with a lens cap, but only half a clip. I used that clip and reproduced a complete clip that would grab onto the 49mm Rokkor lens thread, and matched the styling of the original clip. Printing recommendations:…

Pobrania
34
Polubienia
3
Ocena
0
P
PrintablesMichal Tkáč

Pexeso holder/box 49mm

Simple pexeso holder/box for pexeso with width 49mm

Pobrania
34
Polubienia
1
Ocena
0
P
PrintablesBalesz

Ø49mm lens cap with raised rim

Lens cap with a rim on the bottom to fit lens that has it's middle part flush with the filter thread. Remix of @MMichigan_315563's model.

Pobrania
33
Polubienia
5
Ocena
0
P
Printablesyukosteel

Fuji X70 camera filter adapter 49mm - angular version II 7mm

Fuji X70 camera filter adapter 49mm - angular version II 7mm Model is designed from scratch using BoltFactory Blender plugin. Adapter is 7mm long to support full range of close up focusing. Tight fit is sealing lens front from any dust…

Pobrania
33
Polubienia
3
Ocena
0
P
PrintablesPaul Moştioru

Bins for Full Box stackable 4x4 of 36 base 49mm h

Multiple size bins I printed for Full Box stackable 4x4 of 36 base. Bins have 7 h 49mm interior height. The two boxes can be found here: https://www.printables.com/model/1288433-full-stackable-gridfinity-box-18x13cm…

Pobrania
31
Polubienia
3
Ocena
0
P
Printablesfelixfive

Parametric Tamper Base Station for 49mm & 51mm naked-portafilter (Olympia Cremina, La Pavoni)

Very simple tamper base station for the 49mm & 51mm naked-portafilter for Olympia Cremina and La Pavoni. It has just enough height to clear the portafilter handle from the ground and keeps it level even when not filled. Now parametric…

Pobrania
30
Polubienia
2
Ocena
0
P
PrintablesWoofbitca

49mm Portafilter Coffee Funnel

Custom coffee grounds funnel to fit 49mm Portafilter. Measured to fit the pre millennial 49mm La Pavoni Europiccola portafilter. From 49mm to 67mm diameter funnel.

Pobrania
29
Polubienia
1
Ocena
0
P
Printablesjoe shu

Sony 1650pz lens 49mm filter adapter ring

An adapter for the 1650pz stock lens to use 49mm polarize filter have to replace the frontal glass retainer ring with the spacer.

Pobrania
29
Polubienia
2
Ocena
0
P
PrintablesKriwoel

49mm Rectangle Hood + Cover for WideAngle Lens (Flektogon, Pentacon, Takumar, Meyer, etc).

Fully tested with Flektogons 35 and Takumars 35, 28 on fullframe sensor, no vignettes, good hood coverage. Threadless, fit tight and possible to lock in position with extra screw+ metal shim. Printer setting: PETG, Supports none, solid…

Pobrania
28
Polubienia
3
Ocena
0
P
PrintablesKeywarn

49mm Single Press Lens Cap

A lens cap designed for 49mm filter threads. Fits my Zuiko 50mm f1.8 perfectly.

Pobrania
28
Polubienia
2
Ocena
0
P
Printablesamoser

ISCO 90 f2 and 120 f2 49mm Filteradapter

A small slip-on adapter to mount 49mm ND filters on the back of ISCO 90 f2 and 120 f2 lenses. Best to be printed with 0.1mm layerheight or in SLA.

Pobrania
27
Polubienia
2
Ocena
0
P
Printablesfelixfive

Umikot V2 - 49mm Pavoni and Cremina Base for naked-portafilter

New base for the portafilter from naked-portafilter.com for the 49mm La Pavoni or Olympia Cremina. I use it with the 14g precision basket with 22mm depth. I needed to cut the needles to a total of 40/50mm. Printed with PETG on Bambulab A1…

Pobrania
24
Polubienia
0
Ocena
0
P
PrintablesWatson

49MM Camera Lens cap holder

49MM Camera Lens cap holder

Pobrania
24
Polubienia
4
Ocena
0
P
PrintablesJames___UK

49mm filter holder

You might want to scale this a percent or two. It's quite a tight fit for my filter holder. The inside diameter is 52.2mm

Pobrania
23
Polubienia
7
Ocena
0

49mm Portafilter Hanger (La Pavoni)

This is for a 49mm portafilter off of a Pre-Millenium La Pavoni Europiccola. I hung it to the wall with some double-sided tape or command strips. Simple and effective.

Pobrania
22
Polubienia
0
Ocena
0
P
Printablesbvbreukelen

Tamper for 49mm StepDown Basket

This is a 49mm tamper that I created for my 58 to 49mm step-down basket. It will probably fit other 49mm baskets as well. Pinted in PLA, 0.2 layer height, Structural and default setting. The example shown in the pictures has a height…

Pobrania
21
Polubienia
0
Ocena
0
P
PrintablesDoctorJack

49mm to 42mm aperture ring

When using an automatic lens without it's camera, it is useful to use an aperture ring to ‘stop’ the lens down. In this model, I took a step down ring and imported the STL into Shapr3D. I then closed off the top of the lens and created an…

Pobrania
18
Polubienia
1
Ocena
0
P
PrintablesRobinek70

Filament spool diameter reduction 79-> 49mm

GEETECH Filament spool diameter reduction 79->49mm after reduction, the spool turns more easily

Pobrania
18
Polubienia
0
Ocena
0
P
PrintablesDeeDee

Handrail holder 49mm / 8mm

Handrail holder 49mm / 8mm

Pobrania
18
Polubienia
4
Ocena
0
P
Printablesrobotmay

Minolta Lens Cap Replacement Squeezy Bit, 49mm

This is a replacement for whatever you call the bit that sits inside these late-era Minolta lens caps. This cap came from an MD-mount 28mm f/2.8 from the X-700 era, and the sprung plastic had predictably failed. This cap is a 49mm one,…

Pobrania
17
Polubienia
3
Ocena
0
P
Printablesrsu pr

49mm umikot

49mm umikot, scaled down and adjusted from the 54mm original version

Pobrania
16
Polubienia
2
Ocena
0
P
Printableswoodenteapot

AliKisscafe 58 to 49mm Step Down Basket Funnel

Dosing funnel for the Alikisscafe 58mm to 49mm step down filter basket from AliExpress: https://www.aliexpress.com/item/1005010153373261.html Two versions uploaded: with magnet holes to fit 8x 4 by 1.5mm magnets without magnet holes I've…

Pobrania
15
Polubienia
0
Ocena
0
P
PrintablesVelvia

Noblex 150 and 175 49mm filter ring

Remove 49mm filter from it's metal ring and glue it to the model. Glue in 4x1.6 magnets in the holes. Uploaded a revision, easier to hold with tweezers and larger opening for filter. Magnets should "clip" in place, but will still need to…

Pobrania
14
Polubienia
1
Ocena
0
P
PrintablesDented_Pentax

49mm Filter Adapter for Polaroid Model 80

A 49mm filter adapter designed to press onto the lens of a Polaroid Model 80, 80A or 80B, remixed from Hackaninstant's Packfilm filter. It has been tested on both an 80 and 80B for an upcoming project of mine. Print Settings Printer…

Pobrania
13
Polubienia
1
Ocena
0
P
Printablesyukosteel

Voigtlander 35mm F0.9 Nokton lens built in 49mm filter adapter ring

Simple adapter ring to mount glass from B+W 49mm XS-Pro slim UV filter under the front nameplate of Voigtlander 35mm F0.9 Nokton lens in Fuji X mount Steps: Soften factory glue by dropping few drops of acetone into front filter thread…

Pobrania
13
Polubienia
2
Ocena
0
P
Printables2dPrinted

49mm Camera Filter Pinch Ring

A pinch mounting ring for mounting a threaded lens filter onto a lens with no threaded rim. This adaptor is specifically designed for a 49mm filter to mount onto a Sony DSC-H300, which has a 2" OD lens. Printed with tree supports because…

Pobrania
11
Polubienia
6
Ocena
0
P
Printablesniah

Nomcore Leveler for 58mm to 49mm Step-Down basket

Leveler for the Nomcore tamper on a Sworks step-down basket. Printed in ASA for heat protection, but can be done in PETG. Tolerances might be different for other materials because of different shrink rates. Created with Onshape, you can…

Pobrania
10
Polubienia
1
Ocena
0
P
PrintablesDaneDane

Olympus CLA-1 Lens Adapter Step up/Extension for C-2000z/C-3000z/C-4000z Cameras 41mm-49mm

I didn't feel like spending $50+ on an Olympus CLA-1 step up ring for my C-2020z and C-4000z cameras, so I made my own! This adapts the 41mm filter thread on the camera up to a common 49mm filter size. The step up also extends the filter…

Pobrania
10
Polubienia
0
Ocena
0

Numbered Bases for Minis - 49mm

These are numbered bases (1 through 4) for table top gaming minis with 29mm / 2" round bases. They come in very handy for DMs when managing a roomful of trolls. Any more than that, and your DM is being a jerk. Category: Games

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesPaŠe

49mm tube end plug

An end plug for round tube 49/42mm

Pobrania
9
Polubienia
1
Ocena
0
P
Printablesjoaopdmdias

Normcore Tamper 58.5mm V4 Baffle for 49mm basket step-down

After purchasing the stepdown basket, I've forgot to order the baffle (black piece that sits on the edge of the basket to align horizontally), to adapt my 58mm Normcore tamper. So because of that I've designed the baffle based on the…

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesGet Life

Garden : Washing Spinner Replacement Cap ID 49mm

A simple insert cover, where the spinner has a 49mm diameter. Just plug it in the spinner hole and job done. Slightly over an hour to print and I used PLA+ 2.0, but I would of thought PLA would suffice. The true test will be when the lawn…

Pobrania
9
Polubienia
3
Ocena
0
P
PrintablesDn B On

iphone11_49mm_filter

49mm 필터를 장착할 수 있는 홀더가 필요해서 만들었어요

Pobrania
9
Polubienia
0
Ocena
0

Table Umbrella Hole Adapter Ring (44mm to 49mm)

Overview This is a clean, functional adapter ring (grommet/spacer) designed to fit patio tables with a 49mm mounting hole, adapting it down to fit standard 44mm umbrella poles. It keeps the umbrella securely centered, prevents annoying…

Pobrania
8
Polubienia
2
Ocena
0
P
PrintablesUnitedStates3

Container holder storage compartment 132 x 70 x 49mm

Minimal container for any use in misure 132 x 70 x 49mm

Pobrania
8
Polubienia
0
Ocena
0
P
Printablesiicfa

Motorcycle Strut Vice Clamp (49mm & 39mm pipes)

Got an order for clamps to use while dissassembling motorcycle struts on a vice. These are simple but work. Print them heavy if you plan to use the more than once.

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesJuST 3D

Sturdy Corner Shelf (149mm/5.87")

Made this basic corner shelf for storing my spices. To Print Sturdy Recommend PETG .20mm Structural Profile at least 4 walls at least 25% Gyroid Infill

Pobrania
6
Polubienia
1
Ocena
0
P
PrintablesKRYS-3D

Support présentoir Médaille du Travail 49mm x 70mm

Support présentoir Médaille du Travail 49mm x 70mm modèle bicolore pour les 15 et 20 ans

Pobrania
5
Polubienia
1
Ocena
0