Wyniki wyszukiwania: 6l

Sortowanie

173 modeli

P
PrintablesOestle

IKEA 365+ 10.6l Filament Storage & Dry Box

Modular filament storage & dry box using the IKEA 10.6l containers that can fit 2 spools of 1kg filament. All the parts for one box fit on the buildplate of the MK4 and can be printed at once. Currently for storage only, but that's all i…

Wydruk około 6,97 €–8,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
895
Polubienia
201
Ocena
4,89
P
PrintablesPatrik

Drybox / Spool Holder for IKEA 365+ 10.6L

The drybox is made from an IKEA 365+ 10.6 l food storage container , with a spool holder for spools up to 2 kg. Optional holders for the following humidity sensors are included: The humidity/temperature sensor used in the Prusa enclosures…

Wydruk około 9,47 €–11,58 € nettoWstępna wycena jednego wariantu

Pobrania
327
Polubienia
53
Ocena
5
P
Printableschvvkumar

Canon EF 100-400mm f/4.5-5.6L IS II USM Bahtinov mask

Bahtinov mask for Canon EF 100-400mm f/4.5-5.6L IS II USM

Wydruk około 1,47 €–1,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
46
Polubienia
3
Ocena
0
P
Printablessazhnikoff

5L / 6L / 9L water bottle handle

PETG plastic is better for printing the handle, as it will need to be unbent to slip the half rings through - I don't think you can do that with ABS, but I haven't tried it. Ver 1.3 update: - new handle size - now there are three of them:…

Pobrania
2848
Polubienia
239
Ocena
5
P
PrintablesTwotone74

Drybox made with IKEA 365+ 10,6l food container

English I originally published this drybox on thingiverse (thing nr. 3884699). It became quiet popular, so I decided to publish it here again (I will no longer publish any designs on thingiverse). If you need changes like e.g. equal…

Pobrania
1990
Polubienia
462
Ocena
4,52
P
Printablesthall72

Lego Compatible (3706.dat) Technic Axle 6L

This model is compatible with the lego system.

Pobrania
1631
Polubienia
97
Ocena
4,5
P
PrintablesKorakot E.

Ikea 365+ 10.6L Spool Holder Filament Dry Box

Spool Holder / Filament Dry Box for Ikea 365+ 10.6L box --- This model use Ikea 365+ 10.6L that can put 2 spool per box I also have model for one spool per box available here:…

Pobrania
1579
Polubienia
253
Ocena
4,55
P
Printableslightofhonor

10.6L Mini-ITX Open-Frame SFF PC CASE

Video on case: https://youtu.be/p2pK2BuXsXg Had been noodling around with creating an Open Frame case for a while now, but after seeing this case ( https://www.instructables.com/id/Open-Frame-Mini-ITX-PC ) I finally decided to make one.…

Pobrania
964
Polubienia
205
Ocena
4,67
P
PrintablesHerranz

IKEA 365+ 10,6l Drybox - 2 x 1Kg filaments rolls

A remix of Twotone74 drybox for the Ikea 365+ with equal rollers and a larger silica box/tray to put even more silica. As in the original model the max diameter of the spool is 200mm. Bill of Material: 8x 608 ballbearings (the one in the…

Pobrania
924
Polubienia
124
Ocena
4,67
P
PrintablesEvashape

1-3KG Dry Spool Box - Ikea 365 10.6L

Ensuring your filament is dry during printing can greatly improve print quality. This is especially important in humid climates and for more hydroscopic materials like Nylons and TPUs. We weren't happy with available printed dry boxes and…

Pobrania
692
Polubienia
193
Ocena
3,5
P
PrintablesGMagician

Drybox Ikea 365+ 10.6l & autorewind (and not) spoolholder

I like Ikea 365+ box because it's sealed but I also like autorewinders for MMU2, then here is my mashup. Up to 2 spools, max 63mm width, can be used simultaneously and if no springs are used into hub...this can be used as a normal spool…

Pobrania
662
Polubienia
99
Ocena
4,5
P
PrintablesMoragor

Desiccant container for Ikea 365+ 10.6l box

This is a simple desiccant container that fits into an Ikea 365+ 10.6 liters box (or similar sized/larger boxes of your choice). The lid is held on by clips (I recommend two) to make it spill resistant. Dimensions are approx. 150x64x58mm…

Pobrania
610
Polubienia
115
Ocena
4,89
P
PrintablesJohegy

Drybox IKEA 10.6L MIX

I wanted the silica gel container from one design and the adjustable dual spool holder from the other, so I mixed the two excellent designs linked below. Modifications Modified the silica gel container to be the spacer for the spool…

Pobrania
545
Polubienia
96
Ocena
5
P
Printablesthall72

Lego Compatible (63965.dat) Bar 6L with Thick Stop

This model is compatible with the lego system.

Pobrania
517
Polubienia
35
Ocena
0
P
Printableskikko

IKEA 365+ 10,6L food container

ENG This is the 3D model of the popular IKEA 10.6L container , designed to verify that a custom Filament Storage solution will fit inside it. The dimensions were measured manually with unprofessional tools, but they've proven to be…

Pobrania
492
Polubienia
58
Ocena
5
P
Printableslightofhonor

6.6L & 7.8L MINI-ITX SFF PC CASE

Video of project: https://youtu.be/p55gvl1gWus See my other case designs: https://www.thingiverse.com/lightofhonor/designs I wasn't thrilled with the price of the very small SFF cases so I decided to take a stab at designing one myself. I…

Pobrania
490
Polubienia
141
Ocena
4
P
Printablesthall72

Lego Compatible (73763.dat) Technic Worm Gear 6L

This model is compatible with the lego system.

Pobrania
487
Polubienia
36
Ocena
0
P
Printablesthall72

Lego Compatible (2739a.dat) Technic Steering Link 6L Type 1

This model is compatible with the lego system.

Pobrania
426
Polubienia
47
Ocena
5
P
PrintablesTomik s Cuprou

SEAT Ibiza/Cordoba 6L Honeycomb Central Front Grille

Makes Seat Models Ibiza mk3 Typ 6L 2002-2008 I was printed it from ASA in one piece in P1S

Pobrania
397
Polubienia
21
Ocena
0
P
Printables3dprintkings

Seat Ibiza (6L)

please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings recommended to do a color change by script at height 3.50mm and use a prime pillar Category: Keychains

Pobrania
288
Polubienia
26
Ocena
0
P

16LB Command Strip Mount with 8mm offset for multiboard system

I took the 8mm offset model and adapted it so I could use the command strips mount and have some space behind my multiboard as well. I printed with 3 walls, 15% infill.

Pobrania
278
Polubienia
54
Ocena
5
P
PrintablesBas

MMU2 filament buffer and spool within an Ikea drybox 365+ 10.6liter, Version 4

This is a filament buffer and spool within an 'Ikea drybox 365+ 10.6 liter' for the MMU2s. I wanted my filament-spool, but also the whole route to my MMU2, in a dry and protected environment. So I designed a buffer within the largest…

Pobrania
268
Polubienia
80
Ocena
5
P
Printablesthall72

Lego Compatible (4095.dat) Bar 6.6L with Stop

This model is compatible with the lego system.

Pobrania
258
Polubienia
35
Ocena
0
P
PrintablesDavyGD

Ikea 365 10.6L Drybox (Updated)

UPDATE! I have added a new narrow version of the filament passthrough (V3). The witdht of the passthrough in this version is 30mm, an accompanying holeguide has been added as well!…

Pobrania
253
Polubienia
57
Ocena
4,67
P
PrintablesMarcel40625

Gap Fix - new Front & Roller Remake | 1-3KG Dry Spool Box - Ikea 365 10.6L

Original Front was to short for me so i had a 7-8mm gap, and Remake for adding adjustable rollers with 608zz ball bearings. dimension for ball bearings: - outer diameter 22mm - inner diameter 8mm - thickness 7mm

Pobrania
249
Polubienia
50
Ocena
0
P
PrintablesDiggerw1

Ikea 365+ 10.6l

Spool holder for Ikea 365+ 10.6l box for storage with thermometer and hydrometer. It annoyed me that the spools kept rolling back and forth. All the others I found always came with ball bearings and other accessories for printing out of…

Pobrania
229
Polubienia
44
Ocena
5
P
PrintablesCDS_3D

Seat Ibiza 6L Keychain

Habilite el modo planchado y pared aracne para imprimir. 25% de relleno giroide

Pobrania
213
Polubienia
15
Ocena
0
P
Printablespeschmae

IKEA 365+ 10.6l Filament Storage with deisccant box

I use Ikea 10.6l containers, to store all my filaments, and this model, helps keeping them in place, and not wobble around. I really liked the original model, but wanted to use some of the desiccant beads I have, to keep the filament dry,…

Pobrania
209
Polubienia
31
Ocena
5
P
Printablesthall72
Pobrania
189
Polubienia
12
Ocena
0
P
PrintablesRappetor

IKEA 365 10.6l Box Desiccant (silica gel) Container

The IKEA 365 10.6l storage boxes are ideal for storing your filament. Add this 3d printed container, with your favorite desiccant (silica gel), in the box to keep it dry. The desiccant container is not too big, pretty low-profile and fits…

Pobrania
168
Polubienia
23
Ocena
5
P
PrintablesBadders

Futaba T6L Shift Gate for Tamiya 1/14 Truck

A simple shift gate for Futaba RC transmitter T6L. This separates the three speeds of the Tamiya 1/14 tractor trucks (and also the high-lift models) allowing easier forward and reverse control in all three gears. Once you have set up your…

Pobrania
161
Polubienia
7
Ocena
0
P
PrintablesCocoMonGo

Absolutely Low Friction Filament Drybox using the Ikea 365+ 10.6l

I had a lot of problems with filament being stuck due to the higher friction of pulling out of the Ikea 365+ container and through 1.5m of reverse bowden. I liked the version created by AlexMu but there were things that I thought could be…

Pobrania
158
Polubienia
41
Ocena
5
P
PrintablesOjOj
Pobrania
153
Polubienia
14
Ocena
5
P
Printablesthall72
Pobrania
150
Polubienia
20
Ocena
4
P
PrintablesSimon

Sterndichtung bestway flowclear 2006l/h

Als Ersatz für eine kaputte Sterndichtung bei einer Bestway Flowclear 2006l/h. Eventuell auch bei anderen passend. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 90 Filament: any TPU…

Pobrania
149
Polubienia
21
Ocena
5
P
PrintablesCarlos

Tirador asiento Seat Ibiza 6L

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/5T784a09DOL Category: 3D Printing

Pobrania
145
Polubienia
3
Ocena
0
P
Printablesthall72

Lego Compatible (18744.dat) Minifig Utensil Ski 6L (48mm Long)

This model is compatible with the lego system.

Pobrania
141
Polubienia
19
Ocena
5
P
PrintablesPulsarani DIY

Oil Filter 14 Flute, 74mm (VW 1,6ltr SR)

Oil Filter 14 Flute, 74mm (VW 1,6ltr SR)

Pobrania
128
Polubienia
9
Ocena
0
P
Printables4rd

IKEA 365+ 10.6l Filament Storage (non-destructive): Additional Modules

>> Use case See for Oestle's version to get the base and filament rods. Ikea 365 boxes are great to store filament in there! But it is more convenient to have them on some rods, so they do not roll around inside. There are many options on…

Pobrania
126
Polubienia
11
Ocena
4,5
P
Printablesecarver2

Makita LS1016L Zero Clearance Throat Plate Insert

I designed this insert to be heavy-duty; it has an internal support—designed to be printed solid—that surrounds the kerf cut. Print this as an assembly to retain the ability to print the support part as a solid inner piece. Enjoy! Print…

Pobrania
123
Polubienia
13
Ocena
0
P
Printablesrs6alex

IKEA 365 Dryer & Storage 10,6l

Halter / Organizer für die IKEA 365 10,6l Vorratsbehälter Die Halterung des Dryers ist passend für den aus diesem Set → https://makerworld.com/en/models/56953#profileId-58657 ← !Sprich nur das für die Eckigen Hygrometer!

Pobrania
120
Polubienia
20
Ocena
0
P
PrintablesJarda T

NeoPixel Ring 16LED - LCD Monitor mount / Wall housing

This is a housing to mount the NeoPixel Ring 16LED version. The housing has two holes inside, which allows you to mount it directly to a wall with nails, or you can print the LCD monitor holder to put the ring on top of your LCD monitor.…

Pobrania
109
Polubienia
14
Ocena
0
P
Printablesthall72

Lego Compatible (30104k01.dat) Minifig Chain End for Chain 6L and 17L

This model is compatible with the lego system.

Pobrania
107
Polubienia
18
Ocena
0
P
PrintablesNanodesigner

Cuscinetti lineari LM6LUU- LM8LUU- LME10UU- LM12LUU- LM16LUU- LM20LUU- LM25LUU- LM30LUU- LM40LUU- LM50LUU

Cuscinetti lineari serie lunga LM6LUU - LM8LUU - LME10UU - LM12LUU - LM16LUU - LM20LUU - LM25LUU - LM30LUU - LM40LUU - LM50LUU. Creati con solidworks con passaggio semplificato. per le misure complete consultare il file inallegato LM_LUU…

Pobrania
105
Polubienia
5
Ocena
0
P
PrintablesRithova

IKEA 365+ 10.6l drybox filament passthrough

I use the IKEA 365+ box with 10.6 l capacity to store the filament spools. I designed a filament pass-through to easily switch between filaments. Special feature: 24mm x 24mm sample holder and filament end cap / cover. Works with 4mm PTFE…

Pobrania
102
Polubienia
25
Ocena
0
P
Printableswatermarkhu

Aqara WXKG16LM/WXKG17LM EU switch snap-on case

I've modelled and printed these cases that fit the Aqara WXKG16LM and WXKG17LM very nicely. The cases can be mounted onto existing EU switch-boxes using the standard screw. This design allows me to still easily access the physical switch,…

Pobrania
101
Polubienia
18
Ocena
0
P
PrintablesArmin3dp
Pobrania
100
Polubienia
9
Ocena
5
P
PrintablesJacob Rosevear

SmallRig P96L Light Diffuser

This is a light diffuser for the SmallRig P96L RGB light. Here are the print settings: Layer height: 0.2mm Filament: White PLA Top shell layers: 1 Top shell thickness: 0mm (Change to a higher value for less light passthrough) Bottom shell…

Pobrania
95
Polubienia
10
Ocena
5
P
Printablesbeagleshibuyax

Hygrometer Addon for Ikea 365+ 10.6l Dessicant Lid

For people who are using https://www.printables.com/model/185335-filament-trockenbox-filament-dry-box and wants to add a circular hygrometer that is removable and is installable and also non-destructive. I have created a hygrometer…

Pobrania
95
Polubienia
16
Ocena
5
P
PrintablesGeox

Seat Ibiza 6L (2002-2007) Car Keychain

A slick keychain of an Seat Ibiza 6L (2002-2007). Made to print in more colors, 16th and 17th layer if you use 0.2 hight. The seam in the photos is only from the modeling software and is not present in prints. No supports ofc🙃

Pobrania
89
Polubienia
18
Ocena
5
P
Printablesdrhollen

Solar filter for Canon EF 100-400mm F4.5-5.6L IS II USM (Mk 2) lens.

Solar filter for the Canon EF 100-400mm F4.5-5.6L IS II USM (Mk 2) lens. This solar filter fits snugly on the end of the lens. You will need the actual solar film to construct this as the 3D printed parts are only the frame. You can buy…

Pobrania
87
Polubienia
8
Ocena
5
P
Printableszzzy

Impeller for Hair Dryer Conair 146LDF

Print in PETG, ABS, or ASA. 0.2 mm layer height should work. Try 4 perimeters and at least 15% zig-zag infill. Print with supports. Print Settings Rafts: No Supports: Yes Resolution: 0.2 MM Infill: 15% Filament: ANY PETG, ABS, ASA ANY…

Pobrania
79
Polubienia
6
Ocena
0

Radiator Flush & Plug Tools (1-1/4" ID Hose) For Ford 1.6L 2.0L 2.3L Pinto, Mustang, and others (V3)

I made these tools in order to allow me to store my engines without leaking everywhere or to allow me for a clean removal by leaving the radiator hoses on either the engine or Radiator, I have also included a few variations of some…

Pobrania
76
Polubienia
16
Ocena
5
P
PrintablesJohetan

Drybox Ikea 365 10.6l Container

I needed to fit 2 Formfutura Spools. (78 mm wide) You'll need a bit of M3 Hardware, two lengths of PTFE tubing and for better hold, 8 6x3 mm magnets (had them still from the clicky probe stuff) An M5 threaded rod and two nuts are also…

Pobrania
73
Polubienia
19
Ocena
0
P
Printableswm

Screw Test M14x2 and M6Lx1

This is a test print for screws.

Pobrania
73
Polubienia
0
Ocena
0
P
PrintablesDominik

Stand for seat ibiza 6l

You have to file the edges down to make a bigger surface to stick. Print with suport you might want to print it with high thermal resistance material PLA works in just fine in coolder regions.

Pobrania
70
Polubienia
4
Ocena
0
P
PrintablesPommFritz

DryBox mit Puffer für 2 Amazon-Basic-Rollen (PLA) in einer Ikea 365+ 10,6ltr Box, dadurch schneller Zugriff auf aktuell 16 unterschiedliche Farben.

Da ich es sehr unübersichtlich finde viele Einzeldateien zu sortieren/zuzuordnen, habe ich die Baugruppen zusammengefasst. Die Baugruppen können auch wie zusammengeführt gedruckt werden, aber ich denke das kann jeder für sich selbst…

Pobrania
69
Polubienia
20
Ocena
2
P
PrintablesTykwa

Mini-ITX APU Case 2.6L (Internal PSU, Non-Box; Non-Pico) (Uni Version now avail)

2.6 L SFF Case (PETG) Tiny APU Case, Perfect for 8700G's and alike. This is about as small as I could get it without some crazy nonsensical design, using a readily available standard PSU, There are some smaller internal PSU's but usually…

Pobrania
69
Polubienia
14
Ocena
0
P
Printablesnalladj

Kardia Mobile 6L Case

Bottom.stl is shaped inside similar to the KardiaMobile 6L and inside height is the same as the unit. There are two choices for the top. Top.stl model has ridges in it to make the top snuggly fit on the bottom. Toploose,stl does not have…

Pobrania
68
Polubienia
4
Ocena
0
P
Printablesmichalgerhat

Replica Zenitco RK-6L Grip for Zenitco Sport Handguards

I have designed this grip to mount directly on my replica Zenitco Sport-4 handguard made by 5KU. The design is based on the Zenitco RK-6L grip, a RK-6 variant for the proprietary mounting system of the Zenitco Sport handguards. It…

Pobrania
64
Polubienia
15
Ocena
0
P
PrintablesMatt

Hard case for the SmallRig P96L RGB light

This is a hard case for storing the SmallRig P96L RGB light. I printed this with: Filament: Overture PETG Bed temp: 80C Nozzle temp: 240C Infill: 10% Layer height: .2mm Print with the flat sides down. I did not use any support or bed…

Pobrania
63
Polubienia
7
Ocena
0
P
PrintablesA.Coval

molas tapetes - car mat springs Audi A3 6L 1998

this is a model designed and draw be me to hold the car mats for my audi a3 1998. i could not find where to buy the pieces so i make new ones. Print Settings Printer: Prusa Mini+ Rafts: No Supports: Yes Resolution: 0.2 Infill: 100%…

Pobrania
61
Polubienia
8
Ocena
0
P
Printables3Dtingsmaker

Battery box tray 3x 6LR61 aka 1604A aka MN1604 (9V) + 11x AAA + 4x AA + 2x CR2032

Box for insert : printables.com/model/658690-aaaaa-battery-box-5hao-7hao-dian-chi-shou-na-he/files

Pobrania
59
Polubienia
5
Ocena
0
P
PrintablesLuvmaya

DAISO 16L 12L kimchi box silica container

Silica container which fit with DAISO kimchi box work with 16L and 12L both 20251227 Fixed Funnel diameter

Pobrania
59
Polubienia
2
Ocena
4
P
PrintablesHannes

6l Drager tank feet

feet for a 6l steel 300bar air cylinder with cable tie hole for securing to the tank

Pobrania
59
Polubienia
9
Ocena
0
P
PrintablesGeox

VAG Car Seat Recliner Knob, (Seat Ibiza 6L 2002)

The whole VAG seat recliner knob, tested and working in a Seat Ibiza 6L but should work on most of the vag group cars of that era (approx.. 2002) Please don't print this before testing the mechanism alone. I've posted the mechanism for…

Pobrania
58
Polubienia
5
Ocena
0
P
PrintablesSolidKnow

Glass beer bottle 0.66l Longneck

Important note: This model was created according to the publicly available drawing by Wiegand-Glas. All dimensions that were not on the drawing were freely estimated by me! My recommendation for the print settings: Material: - Layer: -…

Pobrania
58
Polubienia
2
Ocena
0
P
PrintablesWhity

Hystou P09-6L Power Button Cover

I bought two Hystou P09-6L fanless computers from China. They are great machines btw., but have an annoying blue power button LED. Quickly created a cover, which can be plugged in the HDMI port (I don't need it anyway). You will find…

Pobrania
55
Polubienia
8
Ocena
0
P
PrintablesMK

IKEA 365+ 10,6l Drybox with adopted asymmetric rolls

What was changed in this remix: different size of the rolls made by @Herranz_81298 to fit in to original body design of @Twotone74 reduced bearing placement diameter (22.1mm → 22mm) longer shaft for tight fit (158mm → 160mm). It could be…

Pobrania
52
Polubienia
7
Ocena
5
P
Printablescmh

Drain elbow for Vevor 6L ultrasonic cleaner - 3/8" BSP thread

The Vevor 6L ultrasonic cleaner has a brass ball valve with a 3/8" BSP thread - that's an untapered thread with a 16.6mm major diameter with a 19tpi pitch. While the cleaner comes with a fitting that attaches it to included hose, I have…

Pobrania
51
Polubienia
12
Ocena
5
P
PrintablesGeox

Seat Ibiza 6L (2002-2007) Car Silhouette

Silhouette of an Ibiza 6L that was bodykited by MangaTuning Around 170 x 100 x 10 mm Scaleable

Pobrania
50
Polubienia
16
Ocena
0
P
PrintablesMB

Tragflächen Servohalter für Hobbyking Servo D56LV

Ein Halter mit Schablone für ein Turnigy D56LV Servo für den Einsatz in einer Tragfläche. Das Servo kann damit leicht in eine Fläche zur Querruder oder Klappen Ansteuerung eingebaut werden. Siehe Fotos. Wer es ändern möchte, ein STEP File…

Pobrania
49
Polubienia
1
Ocena
0
P
PrintablesJojobean

Ikea 365 10.6L drybox spool holder and buffer

Unfortunately I could never make the spool rewinder work reliably. So while trying to switch to a buffer system I couldn't find one that worked for me. My printers live in a small room and space is extremely limited. My solution was to…

Pobrania
47
Polubienia
5
Ocena
0
P
PrintablesTech.Heimwerker

Trockenbox aus IKEA 365 10,6l

Trockenbox mit Silicabox und Hygrometer zum Drucken direkt aus der Trockenbox.

Pobrania
43
Polubienia
9
Ocena
0
P
Printablesjacekpom

Handle for suitcase wittchen GROOVE Line 96L

Handle fits with original m4 screws

Pobrania
41
Polubienia
4
Ocena
0
P
Printablesakibanokitune

6Lmini itx pc cace

写真の構成例 マザーボード:ASRock H370M-ITX/ac 電源:SFX電源ユニットcore-SFX300 https://www.amazon.co.jp/gp/product/B00JTSFYFA/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 CPU:corei5-8500T(TDP35W) GPU:エヌビディアクアドロP620 メモリ:DDR4 2666 8GB X2 補助記憶:M.2SSD 冷却FAN…

Pobrania
41
Polubienia
10
Ocena
0
P
PrintablesDaniel Westhof

Canon NB-6LH BatteryDummy for S90, S95, S120.

Sadly the opening in the battery cover is not big enough that a USB plug can fit. So you have to source some small barrel plug socket and jack. I used a 4mm Socket that I had laying around. The .stl file I provide here has just a 4mm hole…

Pobrania
41
Polubienia
4
Ocena
0

Filament Box 5.6L / Dyna Dry Box + 30mm width

Dyna Dry files changed for 5.6L box

Pobrania
40
Polubienia
6
Ocena
0
P
PrintablesOndřej Hladík

HP ProLiant MicroServer N36L - 3.5" HDD holder

Holder for 3.5" HDD disk that is inserted instead of the original CD/DVD drive. There is no need to screw the disc, I just recommend inserting cardboard to dampen the disc at high speeds as seen in the photo. Printing without supports,…

Pobrania
40
Polubienia
2
Ocena
0
P
Printablesthall72
Pobrania
39
Polubienia
9
Ocena
0
P
PrintablesButcher9_9

Anko 4.6L Filament Storage Box

Space for loads of silica gel and a bowden tune to connect directly to printer for maximum dryness. Notes: The Roller is made of several parts, the main roller, the Roller Pin and 2 washers as well as 2 x 608 Bearing. It was made in…

Pobrania
37
Polubienia
7
Ocena
0
P
PrintablesTom0147

Bosch (wood) shredder wheel retaining pin (F016L64669)

Attachment to secure the wheels of Bosch wood shredders. This part often falls out and gets lost, so the wheels randomly detach. It's very slightly larger than needed as even the two wheel pipes on my shredder have slightly different…

Pobrania
36
Polubienia
1
Ocena
0
P
PrintablesGMagician

Drybox Ikea 365+ 10.6l & autorewind (and not) spoolholder (rewinder section)

This is the rewinder part of the project published here: https://www.printables.com/model/192366-drybox-ikea-365-106l-autorewind-and-not-spoolholde to assemble it please look at source project

Pobrania
34
Polubienia
5
Ocena
0
P
PrintablesNexl

SIGG Traveller 9.6oz (0,6L) Alu bottle protection

I often carry my aluminum bottle in the side pocket of my backpack where the bottle is exposed to frequent mechanical damage 🏔 . Hopefully, this cover will partially prevent it. Print instructions ⬢ Material: Prusament PETG Carmine Red…

Pobrania
34
Polubienia
5
Ocena
0
P
PrintablesChicago Keri

Record Cleaner Motor Holder for 6L Ultrasonic Cleaner

Have an Ultrasonic Cleaner and some Vinyl Records? The ultrasonic cleaner can do a great job of cleaning your records. All you need is an arbor and some discs to fasten some records to, (available on Thingiverse) a motor to turn them…

Pobrania
34
Polubienia
2
Ocena
0
P
Printablesalexdorman

Volkswagen 1.6L/1.8L Head Stand

A pair of stands for VW engine heads which make it easier to check fit/remove the camshaft and set valve clearances. No more fighting with the head or balancing it on some wood as you check valve clearances. Simply screw two head bolts…

Pobrania
34
Polubienia
6
Ocena
5
P
Printablesclawp

Dry Box IKEA 10.6L food container

I was looking for a variant of single drybox for 2kg spools (prusa), could not find something I like, so I updated the rods to fit inside the original box Bearings 608RS without covers (cleaned and oiled) Plastic rods tend to bend and the…

Pobrania
34
Polubienia
11
Ocena
0
P
Printables0x4A47

Filament spoolholder for Ikea 365+ 10,6L dryboxes - Modified to fit 2kg spools

A spoolholder for the Ikea 365+ 10,6L boxes. Modified to fit 2x 1kg spools, or 1x 2kg spool.

Pobrania
33
Polubienia
6
Ocena
0
P
PrintablesBloodyT

Hydrophonic Tower - 26l Curtec Barrel/Lid Adapter - Screw-together-Version

just like with the last Lid Screw-Adapter I wanted this to be as rigit as possible. The cheapo 20L Barrel is fine for the price but I wanted to test a barrel with thicker walls. Its just a bit to flimsy for my taste… Long story short: I…

Pobrania
31
Polubienia
9
Ocena
0

Surrette Battery Cap Funnel S550 or S6L16-HC

Funnel to refill batteries with distilled water. Otherwise I normally spill

Pobrania
30
Polubienia
3
Ocena
5
P
Printablesdrhollen

Solar filter for Canon EF 100-400mm F4.5-5.6L IS USM (Mk I) lens.

Solar filter for the Canon EF 100-400mm F4.5-5.6L IS USM (Mk I) lens. This solar filter fits snugly on the end of the lens. You will need the actual solar film to construct this as the 3D printed parts are only the frame. You can buy this…

Pobrania
29
Polubienia
2
Ocena
0
P
PrintablesObor

Box for 6 digits 0.1MHz~65MHz Digital RF Frequency Counter PLJ-6LED-A DC 8V~15V

Box to cover frequency counter. There are no holes, you have to drill it base on your needs/ connector usage. You can insert in in switch on/off for 9v batter or power adapter jack for outside connection. Enjoy.…

Pobrania
27
Polubienia
1
Ocena
0
P
PrintablesChris MAD Dahl

Mini Spool (150mm) Holder for IKEA 365 10.6L boxes

I got myself a sample pack of some mini spools (150mm) and needed a place to store them. So I created this spool holder for a 10.6L IKEA 365 box. It can hold up to 6 spools with 150mm diameter and 37mm width. And in the bottom you can…

Pobrania
27
Polubienia
1
Ocena
0
P
PrintablesEric Anastas

Handle for CleverMade 16L Collapsible Shopping Basket

I have a set of these collapsible baskets with completely inadequate handles that have broke on every basket. So I designed these replacement handles. Clevermade Collapsible Shopping Basket The handles have recesses so the baskets still…

Pobrania
26
Polubienia
4
Ocena
0
P
PrintablesChris

Siemens CT636LES6 coffee grounds container attachment

Update 20250106 V2: Made some adjustments to the angles. Corrected some distances.

Pobrania
23
Polubienia
1
Ocena
0
P
PrintablesJaans

Simple buffer spool for Ikea+365 10.6l

Yet another filament spool holder with inbuilt buffer for MMU units like ERCF or Prusa MMUs. I took inspiration from a number of existing designs and numerous design iterations of my own. My latest iteration (this model) takes the buffer…

Pobrania
23
Polubienia
10
Ocena
0
P
PrintablesRokasK

Roll holder for ikea 365+ 10.6L / 11qt container

Meant for this specific one container from ikea. Add some silica beads in the free space and you have a nice dry box. You can reuse the same piece of tubing for lubrication that the standard voron 2.4 build required of you, just a bit…

Pobrania
22
Polubienia
1
Ocena
0
P
Printableshvrkh

Drybox my version - Ikea box 10,6l

Let’s start with everything you’ll need. Printed parts: Folder – spoolholder : print all parts 2x Folder - Filament pass-through : print all parts 2x Original spoolholder rails : 2x Original spoolholder base : 6x Silica gel container. I…

Pobrania
22
Polubienia
9
Ocena
0
P
PrintablesAirFelix

Threaded Bearing Holders remixed for Ikea 465+ 10.6L food container drybox

This is remix of https://www.thingiverse.com/thing:4246377 and https://www.thingiverse.com/thing:4570340/remixes . With the remix bearing holder by 3opaH you don't need to buy any nuts as the bearing holder is threaded. Because they were…

Pobrania
22
Polubienia
3
Ocena
0

Stojánek na AA, AAA, 6LR61

Když se ztratíte v tom, co je nabito a vybito, je fajn si vytisknout pořadač.

Pobrania
22
Polubienia
3
Ocena
0