631 modeli
Enlarged the mount to add space for a LM2596S Buck Converter
Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a custom grip for the R36S to make long play sessions more comfortable. I made it because I saw this video by HyperPlay RPG where they showcase a custom grip: After asking if I could print it myself, I didn't get a reply so I did…
Some simple shoulder buttons I found online.
Print without support. In Prusa slicer it is better to use Classic perimeter generator (instead of Arachne) and disable “Detect thin walls” setting. For fast printing increase number of perimeters to 4 (for 0.4 nozzle) and disable “fill…
Originally published here: Apple iPhone 6s & 7 & 8 & SE 2020 case by tato_713 - Thingiverse For the regular iPhone 6 Plus, 6s Plus, 7 Plus and 8 Plus, see this . This case was tested only with the iPhone 6, 6s, 8 and SE (2020), but it is…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
Originally published here: Apple iPhone 6 Plus & 6s Plus & 7 Plus & 8 Plus case by tato_713 - Thingiverse For the iPhone 6, 6s, 7, 8 and SE 2020, see this . This case was designed using as reference the iPhone 7 Plus, and a commercial…
Better to print from temperature resistant filament (ABS, PETg) and without supports
A remix from @BlackDragonBE_168941 removed 2mm from the whole frontside So the outer key are easier to reach and press removed sharp edges see Photo adjusted tolerances for a thighter fit Since the original model included the Fusion360…
A hard case for the R36S retro gaming device. The case was designed to allow the buttons, joysticks and screen ample room inside the case. There is room to glue in a thin piece of felt above the screen for added protection. There are two…
I didn't like any of the available Designs for Gimbal Protectors already uploaded on Thingiverse so I decided to design my own improved version. Some Key Features I found important: Both Gimbal Protectors connected in the middle, no…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
A tool-less, snap-fit enclosure for your LM2596 buck/step-down converter that should snap-onto any 2020 extrusion without extra hardware. This enclosure also allows you to keep your wires separate via the outside channels or together in…
A starter for the urgent desires. So, com board is ready and was done with M3 heat inserts in mind. As there is currently no idea of where it would commonly fit this is not the final solution. I for my part will fit it into a gridfinity…
This is a reference CAD model for the R36S. Use it to help make a case, or any other accessories for the R36S! Modifications: 2/20/2023 - Updated button positions and SD card slots
Please note that I am still waiting for my R36S to arrive. This should fit the console because I didn't change any of the internal dimensions from the original model. Print the grip upside down with support and bed adhesion. I printed…
This is a case for the R36S retro game console. I added a compartment in the bottom part for accessories like USB cabel and MicroSD cards. There are also two slots for an USB WIFI adapter and USB-C to USB-A OTG adaptor. You can choose if…
Note: Several of my designs for my CNC plasma rig are available here for free, and several others are exclusively for my supporters on Patreon that support for any amount, even if only a dollar a month.…
ABXY FN Start/ Select Buttons for R36S game console designed for FDM Printer Printed in PLA with .10 Layer Heught
Keeps the R36S protected pretty well! Print with the screen side up, paint supports near the triggers and around the smaller button holes. Have some precision scissors ready to get rid of stringing! I printed this with Overture high speed…
This took a while and a lot of filament to get right, and I’m posting it for free. If it has benefitted you (OEM wing mount is $17!), please consider posting a make or buying me a beer to say “thanks guy!”. Anything is much appreciated.…
Do you still have an older iPhone because some of its awesome accessories, such as an Olloclip? This is an iPhone 6/6S protective case that is Olloclip compatible and comes with an attractive honeycomb pattern. Stand out from the crowd…
18650 battery holder in 1x6 configuration. Remix from : https://www.thingiverse.com/thing:4700523
This 3D-printed battery holder is designed for 21700 cells and supports configurations of 6S2P or 12S1P, making it ideal for lightweight R/C air applications. The design ensures durability and stability while keeping weight to a minimum,…
Arrma Kraton 6s Rear Mudflaps These mudflaps fit beautifully on the rear control arms of the Kraton 6s with the existing screw holes (you need to put a little longer screw into the hole which connects the stabilizer rods ) I printed them…
Case for fujifilm NP-W126 and NP-W126S batteries. Optimal wall thickness for the most minimalist design possible. Original and non-original NP-W126 / S batteries fit into the case. Recommended PRINT SETTINGS: layer heigh: 0.13 - 0.18…
With my kids playing around the workshop, the risk of an impact on the workbench is very high. This simple stand prevents the differential of 6S Arrma vehicle from tipping over while doing maintenance, when you fill it and let it rest for…
Rugged case for your r36s console with inserts to store the MicroSD cards, cable and WIFI dongle. No screws needed, the hinges assembled with pieces of filament Add color change to have the console image on the lid The accessories inserts…
Joined gimbal covers for the Radiomaster TX16s radio. These are printed in PLA with a color stop part way. Black Hatchbox PLA: https://amzn.to/3sOiSnG Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution:…
Print with supports for the charging slot near the clip. Uses a piece of filament as the hinge, use a bit of superglue on both ends. Fix a felt strip to where the screen sits so the device will fit properly while in grip mode.
Made to fit the Thinkpad P16s Gen 2 and the lenovo thunderbolt 4 dock. Should fit the previous dock and also the very common Thinkpad P14S Gen 1,2,3,4. Print instructions: 15% infill No supports needed Can be printed in pretty much any…
Print with the top of the device side on the print bed with a brim and skirt for extra plate adhesion. I printed this using PLA+, and lined the inside of the screen area with a felt lining to prevent any scratches to the screen.
A protective cover for the R36S handheld gaming device. It's designed to be printed in TPU. Maybe it would kinda work in PLA, but haven't tested it.
This is a super simple holder for a LM2596 step-down buck converter module, it helps with mounting the module within a larger enclosure without shorting anything out. I bought this particular module from Banggood at the link here:…
Print in TPU with the smallest layer lines you can! More details TBA
This simple and elegant stand was originally designed for the iPhone 6s for my nightstand. It was based off of the lines of the desktop iMac all-in-ones at the time. It also nicely fits the iPhone 12 mini (pictured). A power cord can be…
Why? I needed space under the stairs :-) This is the third model in a series of wallmounts I published and am willing to publish in the future. Features: Stable wall mount to grab the front inferior wishbones Rc cars suspension locks the…
Simple remixed grip for the r36s. Must use adhesive backed felt for a snug fit.
This is a 1:1 replacement for the ar330656, Arrma Kraton 6s EXB heavy duty front suspentioonarm
Designed for FDM Printed printed in PLA .010 Layer height
Better Buttons for the R36s Handheld with tabs, so they don't rotate anymore in the case. Made in 4 Styles: blank Nintendo stlye ABXY Playstation Playstation bold I printed them in smokey black ABS-Like 3.0 Resin by Elegoo on a Anycubic…
Note: Doesn't fit Raspberry Pi 4 - see the original model for that Be sure to use supports. A drawer insert to house a Raspberry Pi 3B and a LM2596 Step Down Converter. In the final model I added holes in the back so you can run the…
Designed with Fusion 360 Printed on Anycubic Kobra 0.1 mm layer height Speed : 40 mm/s Filament : 3DFILS 60D TPU
Display stand to keep the R36s from potentially having something fall on its screen if its just sitting on the desk. Also makes it look nice on display and keeps it off its buttons. Make sure to check out my profile on makerworld for…
Simple cage for 21700 liions in 6s1p and 6s2p configuration. I designed a simple universal Version without "feet" and a Version with “feet” so the packs fit and rest secure on the topdeck of the Falcon 7 frame. Also there is a connector…
I made these as I could not find any openly available models. This is a low profile/low drag alternative to the original Qysea Fifish Propeller protector. Example pictures show prints made in draft mode (0.3mm layer height) for rapid…
I changed the dimensions for this module. https://www.amazon.de/dp/B081N6WWJS?psc=1&ref=ppx_yo2ov_dt_b_product_details
ARRMA Kraton 6S Rear Mud Flaps, 3D print PETG Prusament or Carbon fiber 1,5mm created by dzino
Couldn't find a bracket model for my LM2596S buck converter that fits to a DIN rail or DIN rail clip, so I designed my own in fusion. Uses a DIN rail clip, I used the heat insert version from @Maxstupo…
Infos These are side lids for Li-Ion Packs, based on 18650 cells. One version is for 4S packs, one for 6S. This design consists of several parts. A back part which is closed A front part which is opend for the battery wires A front lid…
I designed these improved mudguards for the Arrma Kraton 6S (V6) EXB. They also fit other models, such as the Outcast 6S EXB — I use the same set on both. The original design I tried was too fragile for my needs, so I modified and…
Did not like what I saw on thingiverse. 3D printers don't print very nice in the air, especially when you want ABS, HIPS, ASA, anything other than PLA, so I designed my own, where you can print it out of separate pieces and assemble it…
Protect gimbals and front sticks. New version with upper stick protection! Assembly the two parts with pressure, once in right position the upper part rotates freely. Insert the gimbal protection first, then rotate the other part: on the…
Gimbal Protector for the Radiomaster TX16S I have larger Gimbal Stick-Ends than the stock stick-ends. I wanted a Gimbal Protector that would fit over those but also fit in the Radiomaster TX16S case (the one that comes with the…
6s lipo balance lead holder
Das Skidplate passt auf mehrere Arrma 6S Modelle (Typhon, Karton, Limitless,…). Ich habe das Skidplate so konstruiert, dass möglichst wenig Einschraubtriefe des Gewindes verloren geht.
This 3D-printed battery holder is designed to securely hold six 21700 lithium-ion cells in a 3S2P configuration . Delivering 11.1V nominal output, it’s perfect for compact and lightweight battery builds, whether you're working on RC…
I provide for download my idea and project a system for modular construction of an energy storage, designed for 6p packages, it consists of a base in which we place the first 6p package, and dividers for separating subsequent 6p packages,…
6S balance clip to prevent balance connector to move. it holds firmly attached to the lipo battery. Easy to print in TPU. Infill dont really matter the object is completly full because it mostly only perimeters. Post your makes! 4S…
Thanks To SnappyFPV Just a Remix for 2s 3s 4s 5s & 6s JST-XH balance connectors. I didn't test them all please let me know if they work. Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.2 Infill: 100 Category:…
Quick mount mobile holder for the Radiomaster TX16s. Holds a mobile phone or similar (63 - apx. 90mm width) for use with Qgroundcontrol and Ardupilot or similar. Hardware: 1pcs apx. 60mm long 4.5mm (max 5mm) spring in tension. 1pcs…
I couldn't find an easy and quick Bike Mount for the Garmine Fenix 5 Plus like the Quick Release Mount for the Forerunner 935. So I deceided to design one. I have 8 designs: the first for F5P and the Quick Release Mount plate from the…
Simple LM2596S box with lid (snap on), 2 to choose: one with creality logo, one without logo. Box model attach with two zip ties.
I've been looking for a good box for my TX16S for some time. Either very expensive or just simple polystyrene. Here is my own box. Very easy to print, Rock Solid and Perfect Fit!!! I do not use the internal module. Therefore no fixed…
!UPDATED!: V2 Radiomaster Tx16s Gimbal protector (also fits for AG01 gimbals) Combined and Single Version Perfect fit with all Materials. I used PLA Please like if you downloaded it :-)
Package LM2596S DC-DC step-down voltage regulator Adjustable LM2596S DC-DC Buck Converter Step Down Voltage Regulator Power Module 36V 24V 12V to 5V 2A Voltage Stabilizer with Digital Voltmeter Display USB Worx HUE without writing Can be…
Yet another transmitter stick protector model! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm or better Infill: 5% - 10% Category: R/C Vehicles
LG Refrigerator door in door latch stop (Model LRSDS2706S). Since the OEM screw is very hard to access, this model is designed for you to scrape/cut the broken one flat on the bottom (pictured) then install this on top, gluing it on the…
Remix from: https://www.thingiverse.com/thing:3409187 Thank you! This clip fits 12AWG Main Lipo leads for easy and secure protection for your 6S balance Leads. Print in TPU 100% Infill Print Settings Printer: Anycubic Kobra Rafts: No…
a nice, sleek, vertical spool holder mount for the cr6se Print Settings Printer Brand: Creality Printer: CR6-SE Rafts: No Supports: Yes (PRINTBED ONLY!) Resolution: 0.2, 4 WALLS Infill: 40 Material: PLA, if you use an enclosue print in…
Here is my (mostly) 3D printed RC buggy I called it the Thrush after the small and nimble ground bird, but people mostly associate that name with the disease. It handles very well, and even tracks straight at higher speeds (check out the…
I reccomend that you print this out of PETG and also salvage and stick the original dust protective mesh onto the back of this one to protect your headphones driver.
2-11-2025 BL SF bolts have been updated to work with the new stronger disconnect that also makes it possible to do reloads when the bolt rest against the disconnect all the files have been moved to zip files! ---------- 15-10 2025 3DN-SF…
Sticks for TX16S M4 (no threads). Good grip for hybrid/pinch style. You are welcome to remix.
Simple grips for the R36S handheld. Can print upright with no supports, I printed it at .2mm layer height. Leaves a slot for the headphone jack, and usb ports, and doesn't reach far enough up to cover the SD slots. Does cover the battery…
PLEASE PRINT WITH TPU FOR OPTIMAL PROTECTION You may need to print with skirt to avoid warping. During my beginning period of FPV, my drone once crashed with the batt touching the ground, almost causing a fire. After that I realized the…
Small jig / tool for aligning a screen protector when puttin it on the R36S. Designed for the screen protector shipped with the R36S (76mm x 59mm). May not fit other screen protectors. May fit other consoles, e.g. R35S, but don't have one…
I am uploading an improved version of my iPhone case. The changes are for ergonomics. I find this design much improved, and it has become my daily used case. Print in TPU for best results. Category: Camera
Gimbal protector for Radiomaster TX16S (MKI or MKII) / Jumper T16 radio (should work, not tested). Protector is from a one piece with a grip for easier removing. LED charging indicator is fully visible while the protection is on. Bigger…
This is my Pult Tray for Radiomaster TX16S transmitter. The parts named "Aloy_..." shall not be printed but rather made of Aluminium for best robustness. The Leather Applications are not required but make it comfortable and look…
A TPU case for the Datafrog R36S Retro Handheld. There are two designs attached, one that uses the included foam padding found in the box that shipped with the device, and another that is fully TPU with allowances for the screen, buttons…
Camera mount on the end of the X-Axis Tension Adjuster. I needed a camera mount for Octoprint for my Ender 2 Pro. All the ones out there interfered with the screen since it was on the left, and couldn't see the nozzle due to the unique…
Printed in flexible TPU Print Settings Supports: Yes Resolution: 0.25mm Infill: 20% hexagon Notes: 3 perimeters 3 top layers 3 bottom layers With translucent filament the infill makes a nice design, so you can choose between hexagon,…
Be prepared for the future and protect your R36S from the apocalypse with this original Vault-Tec safebox. Now with added pockets for iodine pills (or charging cables). Original case model from here:…
I needed an accurate model of this display for designing a 3D printed enclosure for it. This is only a model of the TFT display. Download includes: .f3d, .step, .stl Edit: 2024-03-05 Due to an incorrect measurement the pin and mounting…
11-08-2025 M5G lowers haven been updated to have 1 extra M3 , 25mm reinforcement bolt ------------- 11-10-2024 M5 nut lower have been added. for a stronger connection it will use a 30mm long M5 bolt with 3d printed grips ------- 9-10-2024…
A holder that fits flatter pockets. Inspired by a model by Thingiverse user netsrac, but laid out differently, made to hold three batteries.
Upgrade your R36S controller with this 3D-printed thumbstick extender, designed to enhance precision and control in your favorite games. Whether you're aiming for headshots in FPS titles or fine-tuning movements in retro classics, this…
Creality CR6SE Universal Camera Holder with movable arm. Easy to print. You can mount your camera in many positions on the arm. Simply mount it where it fits you the most. Infill: 30% Supports: Yes (It is better with them) Use M10x25…
Diseño de la tapa del extrusor de la impresora Creality CR6 SE. Está basado a partir de un archivo encontrado en Onshape, pero este no era igual al original. Se subieron los archivos .3mf adaptados para dos laminadores CR6SE_Tapa…
LM2596S Buck Converter Case, design to press fit together
This transmitter tray is designed specifically for the Radiomaster TX16S with a folding handle. All parts were printed in PETG for outdoor use: Satin sheet and Kores application 0.4mm nozzle 240C nozzle temp 90C bed temp 15% infill…
This was made with the intention to printed out of 95a TPU with an infill of 100%. Just in case you want to use a different filament then TPU or have a softer spring, The one without supports in the middle might work better. Special…
Just a simple buck converter case, has cable tie points, max size is 6mm x 2mm, requires 4 x M3x6mm SHS or BHS. Buck converter is the LM2596S. Thank you to LxL3D for the use of the LM2596S Dummy model, which I used to make this case,…
I remix the original handle and put hole for screw and tightening nuts. Use a plug on one side of the handle for a good alignment
This is a simple heat vent for if you feel the need to put heatsinks on your R36S console and feel you need more airflow. Includes a simple jig for marking a hole for the air. Or you could just drill a whole bunch of holes, up yo you.…
I now have 2 remixes. Version 1 is tilted back 10 degrees and has FUZZY SKIN. Version 2 is more like the original but with FUZZY SKIN but I added a modifier to remove the FUZZY SKIN where the game slides into the grip. Version 2 prints…
Die Pultbasis wird mit dem Rückteil des Senders verschraubt. Ich habe hierfür M3-Einschmelzmuttern in den Druckteilen verwendet. Der Sender muss zur Montage geöffnet werden (4 Schrauben hinten, 2 bei der Antenne) - Anleitung als…
The stl files contain only the shell and circuit inlay, if you also want the inside coloring and text, use the .3mf (text can also easily be changed there, or more colors added). There's a line on the back inside where the base color will…
1x6 cell holder for 20700 Li-ion battery. 20700 are mainly used on Dyson products.
