1906 modeli
Derived from Festool vacuum MFT hood by ggragg , to vacuum while working on the bench. Use a Insta-Dog to attach to the MFT table. Has internal radial pins to connect to the 27mm CLEANTEC hose.
Wydruk około 3,65 €–4,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A remix of "Galaxy Watch 5 Active Charging Stand" to fit the 47mm model of the Galaxy Watch 6 Classic. I printed it with 100% infill to give it some proper weight :)
Wydruk około 3,85 €–4,71 € nettoWstępna wycena jednego wariantu
VW Wheel Centre Cap 77mm Part number - 7L6 601 149 Replacement of the original part in case of loss, breakage or just like that :) Tested in heavy traffic :)) During printing, you can change the color layer by layer for a better effect ;)…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Portafilter Funnel for espresso machines, comes in multiple sizes. Features: Tamp through Prevents waste (Spill over) Sits properly no magnets needed! Works well in combination with WDT tool Easy to clean Beautiful Print instructions…
Wydruk około 1,75 €–2,14 € nettoWstępna wycena jednego wariantu
Hier eine mehrteilige Überwurfmutter (17mm) für den Gasschlauch von meinem Grill. Die Mutter kann auf dem Schlauch bleiben so das sie nicht verloren geht.
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
2 variants: for tubes with 14mm outer diameter for tubes with ½ inch (12.7mm) outer diameter Print it in PETG for more flexibility. Optimised for printing without supports to save time and material.
Wydruk około 2,13 €–2,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Checklist Stencil Circle & Square
Wydruk około 1,74 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bonsai display table 09 square 150x150x37mm, support is necessary. Feel free to scale up or down until you like the result and it suits your tree.
Wydruk około 16,21 €–19,82 € nettoWstępna wycena jednego wariantu
SicherheitsRahmen für das Icom IC706mk2g Amateurfunkgerät. Um dieses beim Transport vor Schäden zu schützen. 2 Teile müssen gedruckt werden und man benötigt 4 Senkkopf Schrauben M5x12 um die Teile zum montieren.
Wydruk około 3,88 €–4,74 € nettoWstępna wycena jednego wariantu
Box Note 77mm Circle & Square post it note sticky notes cube 76x76mm
Wydruk około 1,74 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Weight plates for blinds sometimes become brittle and break when removed from the connecting chain. Several popular repair solutions ( https://www.printables.com/model/147266-89-mm-lysel-slatted-curtainvertical-blinds-weight ) suggest…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Aquarium air flow regulator for 7mm tube with M4 screw and exagonal nut.
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
I edited the original model from In3DSpace to fit 7x14mm extrusion u-channel.
Wydruk około 4,97 €–6,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ventilation grid for SDK hole 68mm with support for print Větrací mřížka pro sádrokarton díra 68mm s podporou pro tisk
Wydruk około 1,59 €–1,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gabarit pour perçage des embases Hettich de 28mm et 37mm (LA32) . Référence des embases : LR 28 / LA 32 & / LR 37 / LA 32 Paramètre d'impression : Température d'impression : 240° Température du plateau : 100 Hauteur de la couche : 0.15…
Wydruk około 1,91 €–2,33 € nettoWstępna wycena jednego wariantu
Winkelstück für Glasfaser Leerrohr D_außen= 7mm
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
*I thought the MK3/4 were 250mm in height similar to most other printers in that size category, I will be working to add a version that fits the 210mm height build volume of those printers Scaled down to fit the bed of a standard 250mm…
Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 5mm/s…
Expectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: 5mm/s or lower…
Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 5mm/s…
1:64 print-in-place kit card. Assembly required Print in place kit-card toy. Use a pair of flush cutters to separate the parts then assemble the toy. I have included both a single color version and a multicolor version Jeep Kit Card:…
Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: 5mm/s or lower…
I love this model, however it didn't fit my toilet rolls with 37mm inner diameter so I added a version where the cylinders have been replaced. The new cylinders are backward compatible with the parts from the original model. The original…
xpectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 20mm/s…
Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 5-10mm/s…
Expectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 25mm/s…
Designing simple spacers is an often recurring simple task that is not very exciting. It is much more fun to write a program does my work for me, so that is what I did. My program has generated .stl files for all spacers that anyone will…
Collection of Gridfinity basic cups height 9 (67mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 5mm/s…
(DE) Ich habe das Scharnier eigens für meinen selbstgebauten 3D-Drucker Wärmeschutz mit 5mm Plexiglas-Fronttüre (420 x 340mm ca. 1Kg Gewicht) konstruiert. Man kann es in PLA oder auch in PETG drucken. Ich habe die Scharniere in PLA…
The Donut Espresso Shaker is an espresso shaker that enables even distribution when preparing espresso for a wide range of portafilter sizes. What makes the Donut Shaker special is that it achieves this result with any portafilter size…
Expectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 25mm/s…
Expectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 30mm/s…
These are two Wahl clipper guides in 2 inch (50mm) and 1.5 inch (37mm) sizes. Should work with most 1.87 inch (47.6mm) max. wide Wahl style clipper blades. They are intended to be used with the clipper horizontally, on the side parallel…
This is loosely based on https://www.thingiverse.com/thing:2349048 , but I didn't like the overall print quality. After I saw a similar, foldable sewing aid somewhere to buy I constructed this sewing aid with 3mm, 4mm and 7mm (folded)…
Cable Organizer / Cable Clip - Clip RJ45 - USB Ø3mm USB Ø4mm - Ø6.5mm - Ø7mm - Ø8mm - Ø9mm - Ø10mm 12/01/2025 added: CPM_USB CPM_Ø7mm CPM_Ø9mm 19/01/2025 added: CPM_Rj45 Long Patch CPM_Ø6.5mm 10/03/2025 added: CPM_USB Ø3mm CPM_USB Ø4mm…
FDM -> It is recommended to use a layer height below 0.15 for printing. It is recommended to use LCD or SLA for printing to obtain higher precision. "A series of high-precision bullet models." In order to meet the needs of military…
Please compare the first photo with your slicer before printing. Make sure that your scraper head underside looks like photo 3. If it takes longer than 36 minutes to print, then something is wrong with the slicer settings. Optimized…
I liked the idea of this design …but I wanted one with wider and more more slots and would not require supports to print. So, I created this design which has 8 slots to fit standard 5-inch/127mm sanding discs. I made the walls have…
This is the goldilocks ornament, not too big, not too small, but just right. It is 9-sided or Nonagonal, so looks really nice. It is 110 mm from the very top of to the bottom, and about 47mm at the widest point. I found many ornaments to…
Adapter allowing DeWalt's DCW210B sander (or any other tool compatible with the DWV9000 adapter) to a Festool 27mm dust extractor hose, with or without the twist-lock mechanisms each connector allows. Updates: 2025-09-21 Increase…
Designed 3D printable Vallejo 17ml Cap. Some of the caps on my paint set were splitting and I didn't have any spare empty bottles to reuse the caps. So, I designed this printable version to do the job. Printing: Printed at 0.15mm layer…
I designed this because I couldn't find any 9x17mm aluminium u-channel here in Australia and really, this is one of the great things about 3D printers - if you don't have it, you can make it. The drive to make this was for use with…
New Version with bin to store additional painting tools. Also improved .stl and .gcode file for faster printing. Enjoy. credits to: https://thangs.com/designer/ZackFreedman
This model is similar to the one it remixes, but the magsafe puck is on the same axis as the 17mm ball joint threads. I am using it with a third party Magsafe charger that has a stronger magnet than the Apple charger, but has identical…
Tutorial : All u need to do is just print the model and press the adapter ring in to the 3d model's hole !!! and put it on your sx-70!!! Very simple job AND HERE IS THE MATERIAL LIST material list： ****all these u can find much cheaper…
Hier ein Ersatzteil für verschiedene Bausätze. Kompatibel mit LEGO® Technic 7M / 7L 4211805/44294194/44294 - 55mm lang
This is a print-in-place 608 bearing with 8x 5mm ball-rollers separated with distancers. I made it using ±0.1mm tolerances, as all the other models that I found either were too wobbly due to higher tolerances, or were difficult and…
Parametric (OpenSCAD) model to attach any MagSafe charger to any 17mm ball mount. Features a lip making the charger click into place nicely. Includes ready models for Anker A2560 and Apple MagSafe - good starting point for further…
The design is my own. Its easy to print, with no supports. If you need feel free to glue parts together. Default file are 7x5 bottles (maximum Prusa i3 print bed) and 20 degree stand. If you wanna change number of bottles or degree of…
7mm thickness work perfect with m6/12mm countersunk screw l cut it into a half so it can be print with noraml 3D printer. It can work ever with PLA and PETG, but the ABS is the best for it.
I wanted a calibration cube with a hole. This way you can check an inside dimension too. The cube also has radiused edges and chamfered hole on top. Bottom is flat with no radius or chamfer for better adhesion to build plate. Printed in…
It is recomanded to print in 90% infill and above I printed in ABS.
I was struggling charging my watches and still be able to see / operate them. So I made this stand wich fits the original charging cable (slightly pressed in) - please check attached model dimensions to verify you have the same plug on…
Simple interface plate with 4 locking lugs on one side and a 17mm ball socket on the other. Quick and simple in PLA, will likely build one in PET-G in coming weeks. Overture Easy Black PLA 6 walls, 25% infill, Exterior to interior…
This an Airsoft Spring Loaded BB pellets grenade. 67 x 94mm For maximum spreading performance, load it with 50 to 60 BB (30 on each side max) Printed in PLA matte Sunlu 0.2mm layer height 0.4mm nozzle 4 Walls Thick 20% Infill Support…
This is a 17mm RC wheel wrench I designed for use on my 1/8 scale Arrma & Mugen rc vehicles. The shape is ergonomic and height is optimized with a thru-hole for access to the axle set screws on most 1/8 scale RCs. The tool works great for…
First of all, this is limited right now to one size range, as it was requested and not too difficult to resolve. I’m including the STEP file, but for the threads you’ll want to refer to this config file . Pitch of .75, which is most common.
These 3D-printed computer hard drive adapters serve as a bridge between different-sized hard drives and the standard 3.5-inch hard drive bays commonly found in desktop computer cases and hot-swap/tray systems. Here's a breakdown of the…
I needed a tightening ring for my phone mounts that attach to the standard 17mm socket. The cheap plastic tightening rings kept breaking on me. I took the original nut and increased it by 17% and found it fit perfectly on all my mounts.…
Made two simple holders for 3 and 9 bottles. Hope someone finds it useful. It fits 17ml Vallejo bottles OR any bottle with 25mm diameter.
Golf ball sized (42.67mm) balls with various surface textures. Each ball is printed as two identical halves and are held together using two permanent locking pins . No adhesive or supports are needed. I would not recommend that you hit…
Mounts an OEM Apple MagSafe charger to a 17.3mm ball commonly found on CD slot phone mounts. Print in a higher temperature material than PLA to avoid softening in summer heat.
top loader card stand display 1.7mm - 1.8 mm printed with pla and 15% infill
Drone frame motor for 7mm motor Motor slot inner diameter 7.5mm
Ich brauchte einen Ersatzknauf/-griff für meinen Wasseranschluss meiner Waschmaschine im Keller. Dieser hat die, meiner Meinung, nach unschönen Rastbuchsen mit 7,7mm Durchmesser. Ich hab ein stark verändertes Remix durchgeführt und tadaa,…
I have an old holder that have a 17mm diameter ball but do not charge the phone so I made this Print the washer in tpu, I think there are rubber washer in hardware store can fit there if you can print it. I include a CD stand with ball so…
These O rings that should work: https://www.amazon.com/Nitrile-Rubber-Rings-Metric-Sealing/dp/B0BFMWKP79/ https://www.amazon.com/uxcell-Rings-Nitrile-Rubber-Diameter/dp/B07W72F7RF…
Another Remix, just because one of the standard sizes in germany for sandpaper (230mm x 96mm) lets me cut 2 sandpaperstrips out of it, but lets me with one strip of 230mm x ~16mm left. And so i decided to make a shortcut version of this…
Prints in just two parts and clips together without screws or springs. Designed for PLA+ filament and requires supports . Print one 1x body with your selected design and 1x spring
Small wrench for AdBlue lid Fits for Audi A6 and others Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 Infill: 20 Filament: Prusament PLA Yellow Category: Automotive
Back-side of the model green and purple stands with red supports are single-wide and used for the ends. Yellow, blue and orange for double-wide sections between modules. Each shelf unit can house 5 bottles, 30 bottles for a module.…
The 7.92×57mm Mauser is a rimless bottlenecked rifle cartridge that was used as the German service cartridge in both World Wars. Category: Sport & Outdoors
Mini hex wrench for 7mm (M7) nuts. Useful when removing/attaching wheels to various RC cars.
The adapter is designed to connect a hose to a thread G1/2". Available diameter for hose: 7 | 7,5 | 8 | 8,5 | 9 | 9,5 | 10 | 10,5 | 11mm Print instruction: material: PETG layer height: 0,2mm (0,3mm) nozzle: 0,6mm (0,4mm) support: no…
Dieser Schlüssel Dient zum Öffnen von Klappen mit 7mm Vierkant.Er hat eine Grösse von 4X4cm und einen Innenvierkant von 7,2mm x7,2mm mit einer Länge von 1cm der Durchmesser ist 15mm. Zum Druck, Ich hab es mit Brim auf dem Zylinder stehend…
Used a old DVD drive to model this. Hold 8 2.5" by 7mm drives and fit in 1 5.25 drive bay
Remixed this really great design of this Festool adapter that twist and locks into place just like any native Festool product. I've added a reducer so that it expands to a 2.25" outer diameter so that I can use my old RIGID vacuum…
OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for little to no…
FDM -> It is recommended to use a layer height below 0.15 for printing. It is recommended to use LCD or SLA for printing to obtain higher precision. "A series of high-precision bullet models." In order to meet the needs of military…
This is a paint display for 20 17ml Vallejo bottles. It has a small footprint, therefore it saves space at your workplace. Some parts need to be printed multiple times: Bottleholder 17ml.stl: 3x Side.stl: 2x Tip: If you use the…
R7 Gyro Egg Fidget | Full Gyro Ring Edition | Easter Fidget Toy | R7Makers Meet the original. 🥚 Before the shell, there was the R7 Gyro Egg — a flat-profile, full-ring gyro fidget that looks like a candy Easter egg from above and comes…
Pay with Love: The Magic Tap Wand 💖✨ Ever feel like paying for groceries should be a little more... magical? Whether you want to channel your inner wizard or just spread a little love at the checkout counter, this Tap to Pay Wand is here…
This adapter system wraps the edges of a OVV3D 1kg 197x62mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable OVV3D nameplate for…
Update: This model has been stolen and is being sold elsewhere. To those sellers I'd like to point out the model contains some hidden features, not only my name, but Ukrainian support messages, as well as some information about what…
A extra slim lens/photography filter case with magnets (6x2mm). Fits 77mm, 67mm, 58mm, 52mm and 45mm Filters. 92mm x 87mm x 10mm Maximum filter thickness 7mm
Do you need to attach a ND filter to your iPhone 17 Pro or Pro Max? Here's a solution. A total of 10 magnets are required. Magnets should be 10mm x 2mm . Glue magnets into each of the 5 depressions on both the base plate and filter ring.…
This model allows you to put any 17mm ball mount on your CD tray. It works great as a phone holder. You have to print this model with supports. I wouldn´t recommend using PLA because of high temperatures that can be in your car while…
Remix some m-lok T nuts (7mm nuts). I do not know how to make screws and print can not be so detail, so just phi holes. Can just screw in. Have M4 M5 and 6# version Category: 3D Printing
Replacement cap for Scale75 17ml paint bottle, featuring an internal sphere for improved sealing and leak prevention.
27mm Round Bases for Tabletop Miniature Games in five varieties (Porous Rock, Rusted Plates, Asteroid Surface, Broken Sidewalk, and Broken Concrete). Includes supported versions. Usable for any modern or sci-fi games that uses 27mm round…
i have adapted the holders for 37mm and 42mm pliers. In addition, I removed a little material from the underside so that the print bed adhesion is better
Filament used: PETG-CF, PETG 0.2 layer I couldn't find any front cap for 37mm so i made one.
Usefull for wheel nut on 1:10th scale RC cars Category: R/C Vehicles
Bei einer Freundin hatte ich einen Solarbrunnen im Garten entdeckt. Fand ich ganz nett und hab ihn mit Modifikationen konstruiert und mit einer solarbetriebenen Pumpe versehen. Ich habe diese genommen:…
Compatible with the Tesla Model 3 (pre-Highland, 2021-2023) or Model Y center console. Print in PETG, ABS or other heat- and strain-resistant materials. PLA will soften in the hot cabin in the summer, not recommended. Print flat on the…
Lelit espresso 57mm portafilter holder with rubber feets
Print with ABS, ASA or any other high-temperature filament, with 100% infill. No Support needed, I printed with Support, my ABS has Layer adhesion issues. added a Version without dowel pin hole added a Version V3 V3 removed - construction…
How to insert/orient the organizer (IMPORTANT) The insert is asymmetric and is meant to fit the box tightly! If you insert it into the box and it wobbles around – rotate it 90 degrees and press it inside, it'll push the forward and back…
