2278 modeli
Simple tool for lubricating LM8UU bearings. Print instructions New version! We found a few things we could improve, so we did, as we always do :-) Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn…
This battery adapter is used in multiple of my other designs. For Makita 18V Batteries, see my design here: https://www.printables.com/model/436132/ For Milwaukee M18 Batteries, see my design here:…
This battery adapter is used in multiple of my other designs. For Bosch 18V Professional Batteries, see my design here: https://www.printables.com/model/427974/ For Milwaukee M18 Batteries, see my design here:…
A Cap for the "Prusa lubricant LM8UU adaptor" Designed by Honza David. This is ONLY the Cap, for the adaptor check out David Honza´s Design. It is a loose fit . If you want it to be tight scale in down in the slicer. “With some trial and…
Schrader tyre valve to airbed mattress valve adaptor, Printed in PLA. No supports. Print wide end down. Requires you to punch out hole with small screwdriver Used variable heights in Prusaslicer, main body printed @ 0.2 and screw thread…
Fan mount and air flow duct to allow the use of a larger and more powerful Noctua (or other 40 mm) fan to improve the cooling of the cool end of the extruder. This will help when printing PLA in particular to avoid heat creep issues. The…
An adaptor to fit 80mm air duct onto a 100mm inline fan. The fan pipe outer diameter should be a few mm less than 100mm, and the adaptor should be a perfect fit. If your fan is not a good fit, scale the model using larger inner wall…
Simple RC Car Steering Adaptor for one handed use. Fits directly on to the existing wheel. Designed to work with Spektrum SLT3 transmitter. Recomended Material : PLA Nozzle Diameter : 0.4mm Layer Height : 0.2mm Support : YES In-fill…
I created this adaptor plate because I wanted a cup holder on my electric scooter. There was a lot of options for bicycles (even a standard mounting system) but nothing for a scooter. This adaptor plate bolts onto the steering stem of the…
To connect your bosch PEX 300 AE to a kärcher vacuum hose (you need my hose adaptor)
I've requested an Abus adaptor to Nuki but my new cylinder doesn't have the shape of that adaptor but an 9.9mm cylinder instead so I had to create this adaptor for it.
Just to keep them together.
As you can see in pictures you can reassemble parts from existing router to this model. Only 1pc. M4 nut is needed to put in during printing at Z=30,5mm and continue printing.
I had this AQUAPUR adaptor for quite some time, but doesn't fit on my DREAME XR vacuum cleaner. So I remixed design from 3D Galaxy . I printed in PETG Infill: 30% or 40% Layer Height: 0.20mm Supports: Yes, organic If you like my work…
Go Pro Mount adaptor to suit Haydn Fiberglass extension pole. The one I used was available at Bunning NZ https://haydn.co.nz/collections/extension-poles/products/professional-extension-pole?variant=35674313490587 Print with 3 perimeters…
Small hook adaptor for Ikea(or similar) picture frames. I made this one specifically for Ribba Ikea frame and the Command 450g hook. Has a small tab to keep it on the frame while hanging it on the wall. Will update if I run into a…
I had this SILVERCREST handheld vacuum pump lying around. When I bought at discount some ZWILLING 's storage containers I wanted to give this pump a new purpose. I decided to make an adaptor with a rubber o-ring to improve suction.…
It has to parts. An adapter for your Somfy remote control wich fits perfectly into a Busch Jaeger power outlet/light switch and a lid to cover it. You assamble it this way: 1: You put the adapter into the Busch Jaeger part, from behind.…
This is an XT60/banana plug adapter for chargers with large charging slots (72mm), such as the SKYRC MC3000. Crocodile clips can be connected to the adapter to charge individual rechargeable batteries at their solder lugs without the need…
Something I have wished was produced but have never found anything like it. I needed a way to neatly connect 25x16mm self adhesive trunking to a single UK pattress so I could relocate a light switch in my workshop without having to chase…
Pressure fitted adaptor for Volvo fE central console cup holder. I drink from 0,33 (slim) and 0,25 litre cans at work, and those won't stay upright in the original cupholder, so I made adaptor for it. V1 Doesn't fit regular (fat) 0,33 or…
I had to change the seals recently in by GROHE PRESSURE BALANCE VALVE CARTRIDGE TIIEF value. Unfortunately, when trying to remove the handle after loosening the setscrew, this handle was still stuck. I finally got it off, but this piece…
Its my very first 3d model made because i found that there are no mount adaptors for the godox ml100i softbox lantern i bought, so i made one that works. I use it to adapt it to an Ulanzi C01 100w cob bi color light. Feel free to adapt,…
Rarely used Nacs adaptors were taking up valuable real estate in my driver door compartment so with this mash up they are now neatly stored in my center console as part of the supports for my printed shelf system.
Lets face it, adaptors for telescope mounts and tripods are expensive. I created the first version of this in PLA over 8 years ago and it served me well. I decided to replace the first version with this new 2.1 version for a couple of…
Replacing pat for Korum Speed fit tripod adaptor Speedfit Tripod Adaptor . Printed from PETG and reused original screw from broken parts.
Alternative Quick release adaptor for Korum system
I wasn't liking any of the spool adaptors I was finding for the AMS so I designed my own. This one snaps securely to the edge of the spool. It can easily be taken on and off the spool. I have tested it with Polymaker and Overture spools.
Its too cold outside to hold a cold beer after work so ive designed this to keep the cold fingers away from the even colder beer. Tested by hard and hardly working coworkers 10/10 Does not stand on table too great, but table doesnt mind…
NOTE: this interface was designed to suit the studioform BSB X1 foam interfaces/the original V1 studioform dream air interfaces (which were the same thing). If you want to use the newer v2 studioform interface they are notably larger and…
This tiny part will help you get rid of cured resin leftovers stuck to the FEP foil on the bottom of the resin vat. Simply attach the part onto the front corner of the platform, trigger the cleaning procedure using the printer's…
this part: https://1url.cz/FKSrA for this valve: https://1url.cz/EKSry only small O-ring needed
Parts are print oriented with no support. Only OBI Cap 2colors is not print oriented. It need 1pc M3x16mm and original connector 643852-2 (3,5 euro from Makita). Fusion360 file can be use to modify the model or import in other projects.…
I designed this adaptor for the cupholder in my 2018 F150 to hold either my 14oz Yeti Rambler or 32oz Nalgene bottle to keep them from sliding around the truck. Should fit 2015-2020 Ford F150's and also confirmed to fit in the 2021 Ram…
PARKSIDE X20 Battery Adaptor - adapt any power tool to use a Parkside x20 Battery . Revive your old tools.
Whats even better than upcycling? Not creating waste in the first place. This turns your Prusament-Spool into a Refill-one. If you are looking for a design that does not require glue, I recomment this one:…
Hi Internet Sim Racers, After doing a final test print of my Thrustmaster Txxx 70mm hub adaptor kit... I feel it's ready for public thrashing. Ok, so whats in the pack I hear you ask... through some form of audio bug I have in your…
socket adapters for mantis tool grid system keeps long sockets from rolling around by standing them on an angle
I scaled the original model to 62% and added a base to the bottom to fit in most vehicles cup holders. Just want to add on that I'm not an original designer, this similar design has been in my local area however I could not find a file…
I didn't like the weight of the spool on top of my printer any more So I designed an adaptor to use the original spool holder that came with my MK3, which adapts it to mount on the side of the printer. An easy print part, I printed mine…
Purpose: Tool for lubricating LM8UU bearings with a 85g tube Super Synco Lube DE21030 synthetic grease and a screw cap. Are you looking for the same tool with screw cap for the original prusa grease tube? Look here:…
When you buy an Intex pool, it's coming with a small pump and hoses, generally too small for the pool volume : you have to buy a bigger pump with sand filter, generally sold with only ONE hose adaptor. This thing allow you to print the…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 Design These items are made to fit to standard 120mm fans commonly made by computer, chassis and rack fan manufacturers to connect to a 100mm flexible ventilation pipe with a clamp. There are two different looks available.…
Makita DVC750L vacuum adaptor for Makita DBO180
Why and what for This will allow you to connect 4mm OD (standard size) PTFE Tubing to Autofeeders of Snapmaker U1. You can customize all the colors. Discussion topic -…
These are CAMLOCK compatable nozzles from 20mm to 80mm (in 0.5 mm increments). They are compatable with the awesome and award winning CAMLOCK Connector by @peterh . Hints: You may want to flip the prints to have the wider diamater ends on…
Technically not a remix, but the concept is similar enough to VoltexRB's work that I've nominated it as such. Basically works the same as their version, but has a slightly better fit and deeper grooves to make it harder to come loose.
The NA-FMA1 fan mounting adaptor permits the installation of the NF-A12x25 and several other Noctua 120mm fans on 140mm watercooling radiators (or other screw-mount applications that are designed for 140mm fans, e.g. as a case fan).…
The existing spool holder of the ender 3 V3 SE added to the shaking of the Z-axis to reduce shaking and enable better filament supply by rotating the direction of the spool holder 90 degrees. material 1. M5 nuts x 2 2. M5 x 15mm = 1, M5 x…
WIP! Let me know how well it works. Logitech G29/G920 Quick Release adaptor using 32mm bike seat clamp, like this one . Files Female adaptor for fitting to the Logitech base Male adaptor for refitting original Logitech wheel Male adaptors…
Cordless tool battery adapter. Dewalt Battery to Makita skin tools Extra hardware spade connectors wire 9mm female terminal fuse terminal M3 x10mm bolt & Hex nut Prep spade connectors like this, flatten out the shoulders if you can…
Flex ATX to ATX PSU adaptor Plate. The Horizontal orientated adaptor is also compatible with 1u PSUs. Allows you to fit a Flex ATX power supply onto standard ATX PSU mounting points. Please select the required Orientation. Each Adaptor…
This is an adaptor to convert a GoPro mount (either side) to a standard 1/4-20 tripod mount. Print instructions Category: Camera Post-Printing A 3/4 inch 1/4-20 bolt is pressed into the mount base and a 1/4-20 screw can be glued into the…
DOWNLOAD CAMLOCK end fitting HERE. This part will make any of my old VACUUM ADAPTERS compatable to the new CAMLOCK end. It will be useful if you want to change over before making new fittings or if you like the new setup but don't want to…
A design by EGoe from Thingiverse for a J1772 Tesla Adaptor Lock, with some considerate modifications: Bi-directional There is a small press-fit that helps keep the ring attached to the adaptor while you carry it around. There are two…
I made this adaptor to connect my Festool D27 hose to some cheap Titan shop vac attachments I bought, but it should fit any attachments with an internal diameter of 32 mm. The Festool cleantec end locks into place with retaining tabs…
T-ring adaptors for 2" and 1.25", should work on any telescope. The adaptor if of the EF type, it should work on any Canon EOS cameras.
Update I have re-moddled it as the old file was a bit of a mess, new file and STEPs in the ‘Remodeled’ folder in the file list. (The fullsize versions still use the same mag catch.) Also, please use the print orientation shown in the…
If you have a camera capable of taking 220 roll film you can use it to expose a full roll of 35mm film using the adaptors in this print. I've tried other 3D-printed adaptors but none worked in my Hasselblad A24 magazines, which is why I…
low material HDD adaptor for 5.25 x 4 bay everything is provided. you will want a fan to keep the drives cool. I use it in my NAS to hold more drives.
Dewalt Battery to Dyson V6 - adaptor Version 2 -- https://www.printables.com/model/1897716-dewalt-battery-to-dyson-v6-adaptor-_-version-2 No soldering needed Requirements SP0702 switch…
I created this battery adaptor for my aqara motion sensor as I had plenty of CR2032 batteries but no CR2450. Version 2 is 4mm thick that fitted perfectly with the motion sensor. I have included the 5mm version for other applications.
We have templates for both male and female pairs of the RF mount. They fit my camera and lenses without further modification. Having done this, I belive it is possible to have a mount that fits both RF and EF - you just have to cut a bit…
My Main tools are Dewalt for which I am deep into the battery platform. Note: There are 2 versions of the Ferrex platform. examine the pictures to check if this matches. As a diyer, I can't justify buying all professional tools: some are…
Attach your Dummy13 to a metallic surface! Simple Magnet holder for the hip of a standard Dummy 13. it holds a 12mm x 2mm round magnet. Use standard Dummy13 Print settings, glue the magnet in the slot. Any feedback is welcomed!
Cordless tool battery adapter. Dewalt Battery to Milwaukee skin tools Extra hardware 6mm male spade connector x2 wire female fuse terminal x3 M3 x10mm bolt & Hex nut x2 470k resistor spring (0.5mm, 35mm, 5mm) a retractable pen spring will…
Use your metal fusion beyblades with your Beyblade X launcher! You likely will want to remove the stem within the X launcher (that is for the BeyPass) as it may damage the face bolt sticker. The Beyblade X prongs will be pried off when…
UPDATE 04-17-2024: I realized that the ram style mount on the back of the device is also used as a heat sink for the CPU inside the unit, so I modified the mount to include openings to allow for air flow around the aluminum mount plate.…
Hi Internet Sim Racers! I present the Logitech 70mm Hub Adaptor "kit" with 2 versions and a Quick Release Hub Adaptor. Whats in the Pack? 1) Standard 70mm adapter puck similar to that which is very popular. 2) Stubby 70mm adapter which…
This converts your Irwin quick clamps into a device to hold two boards at a 90° angle. I added metric and standard measurements on top and large holes so screws can be placed while the clamp is holding the pieces together. 50% infil…
Use this adaptor to connect your vacuum hose. You need my further adaptors to connect this adaptor to your woodworking machine. I would be happy if you would design more adapters for the basic module. You can finde a file with the basic…
Filament reel adaptor for Flashforge AD5X 62mm file and 73mm file
The blower is RYOBI ONE+ R18TB-0, and it's about 60 euros here in Europe. The blower has very good air flow but to get most use out of it, you really need some adaptors for it. This adaptor fits our camping mattresses and I'm sure all…
We needed to get rid of resin smell. Solution: growtent with ventilation setup. Prints without support on prusa xl
I had a dead Dyson battery in my V8 Absolute stick vacuum for a second time. Rather than buy a replacement battery (o a replacement vacuum), I created these printer parts so the Dyson could use Ryobo one+ 18V batteries. The result? It…
Iron stand and adaptor clip for TS100 iron and Dewalt Li-Ion batteries. Use 0.5mm copper sheet for the connecting blades, and XT60 connector for connection to TS100 standart XT60 lead. Use the printable jig to solder the connector to the…
Didn't like the idea of removing screws to mount the O3 air unit into a tpu mount adapter so I designed this case for the unit to sit on, it has 20x20mm and 30x30mm mounting holes, a channel to run wires under and a couple of braces that…
Adaptor for mounting the router to the board
Want to use your 2021 11" Ipad pro as the interface for your DJI mini RC-N1 controller instead of a phone? Don't want to remove the Ipad from the Logitech Touch Combo case ( https://www.amazon.co.uk/gp/product/B07W4DH1Y5 but are ok to…
Printed with PETG in a Bambu P1S. Pencil mounted on the left side as it makes carrying the iPad easier, for me at least. Lays flat on the table, makes writing/drawing easier. Edit: adjusted the dimensions a little for a better fit, added…
This improved MK4 version has some new features you asked for - we found a few things we could improve, so we did, as we always do :-) Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn it…
Makita Battery to Dyson V6 - adaptor No soldering needed Requirements SP0702 switch (https://www.jaycar.com.au/spst-red-momentary-round-pushbutton/p/SP0702) 9.5mm male spade terminals (https://www.aliexpress.com/item/4001062653078.html)…
DISCLAIMER: Airsoft part only, utterly useless in any real firearm! It started as a joke, then became a bet and in the end turned into surprisingly working project: Someone offered me an MP5 hi-cap he had no use for, and i wondered, if i…
Recently had a bathroom fitting break in the wall because it was under too much tension. Needed an adaptor to relieve that strain and could not find any. So I imported both male and female garden hose fittings and cut and stitched to give…
Two piece adaptor that clips to the top of a Dewalt battery and provides an XT60F connection out. I used some 0.5mm copper sheet for this to create the contacts, but you could flatten a thick copper wire or use tin to do the job. Cut and…
This adaptor allows you to move the spool holder from your Neptune 4 (and probably 3? Please let me know!) off the top of the printer and mount it to a wall, or in my case to a board to sit beside the printer. This should improve…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 Design These items are made to fit to standard 140mm fans commonly made by computer, chassis and rack fan manufacturers to connect to a 100mm flexible ventilation pipe with a clamp. There are two different looks available.…
The applicator end is unmodified. Threaded end is enlarged and modified to have a 9/16-16 UN thread to fit an 85g Super Lube tube. Note: the thread dimensions were found by trial and error, so might not be exactly right, but seem to fit…
Adaptor for Decathlon Quechua Air Mattresses to regular Bike Pumps. My Mattresses intake is about 17.6mm wide. The Adaptor's width goes from 16mm to 19mm and it's 40mm high plus the little screwthread part. I've printed mine with 0.2mm…
Milwaukee Battery to Dyson V6 - adaptor No soldering needed Requirements SP0702 switch (https://www.jaycar.com.au/spst-red-momentary-round-pushbutton/p/SP0702) 6mm male spade terminals…
Mounting plate with 10 Lego technic compatible peg holes that clips round a standard, cheap 28BYJ-48 unipolar stepper motor. The stepper motor drive axle is perfectly aligned so as to mesh with other technic gears. Printed on an TronXY…
Designed for the 40oz / 1.2L HydroFlask bottle. Measurements of the section that goes into the car's cup holder: Diameter: 7.5 cm Height: 5.72 cm
Milwaukee Battery to Dyson V7-8 - adaptor No soldering needed Requirements SP0702 switch (https://www.jaycar.com.au/spst-red-momentary-round-pushbutton/p/SP0702) 6mm male spade terminals…
I use this adaptor to attach 1 inch ball valves to Pet Bottles to use them as conical fermenters and drain yeast easily Print with 0.1mm layer height and 100% infill.
This adaptor allows you to combine two hoses with different diameters (12/16 mm to 16/22 mm), especially in a fish tank. This is useful if your filter has a different water-output than your aquarium inflow. The outer diameter of the…
Update: Updated the model and re-did the interface for the Amomax side. Slightly thickened the whole thing and generally made it a bit nicer. Printing Instructions No support needed in the nut hole on the bottom. For settings I would…
Adaptor for Dremel 300 to be used as a router tool. Helps to move the router in a given distance over the surface of a part to be routed. Printed in PLA 0.2mm. Three parts: router adaptor, distance ring, knob. Other parts needed: Knob to…
PVC Adaptor for 15mm Nominal Diameter PVC (Actual inner diameter is 18mm and outer diameter is 21.6mm) Update: T-Joint REV1 (31/5/'17): Apologies: I had the model oriented incorrectly. L-Joint Added (3/6/'17) Corner-Joint Added (9/8/'17)…
Adaptor for every size spool
