711 modeli
Although the original designs are great, after / during the build of my annealer, i found that some of the parts did not quite fit together right or the tolerance were too tight. I also designed some new parts that help out with the…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here some more runway module. I pumped up the runway tiles to 175% in width (175mm x 175mm) and 125% in height (2,5mm is stable enough) to fit the 1:144 airplane models for playing. Settings Value Infill 15% Perimeters 2 Layer Height 0.20…
Wydruk około 3,46 €–4,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here the Heliport Module. I pumped up the runway tiles to 175% in width (175mm x 175mm) and 125% in height (2,5mm is stable enough) to fit the 1:144 airplane models for playing. Settings Value Infill 15% Perimeters 2 Layer Height 0.20 mm…
Wydruk około 3,36 €–4,11 € nettoWstępna wycena jednego wariantu
Here some more runway modules. I pumped up the runway tiles to 175% in width (175mm x 175mm) and 125% in height (2,5mm is stable enough) to fit the 1:144 airplane models for playing. Update: Reversed marking of the start marking. Settings…
Wydruk około 3,45 €–4,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here some more runway modules for direction and order of the runway. L := left ; R := right ; C := center ; Numbers of degrees. I pumped up the runway tiles to 175% in width (175mm x 175mm) and 125% in height (2,5mm is stable enough) to…
Wydruk około 3,18 €–3,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here some more runway modules. I pumped up the runway tiles to 175% in width (175mm x 175mm) and 125% in height (2,5mm is stable enough) to fit the 1:144 airplane models for playing. Settings Value Infill 15% Perimeters 2 Layer Height…
Wydruk około 3,48 €–4,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dieser Anschluss dient zum Ableiten von Wasser durch eine Schmutzwasserpumpe z.B. zum abpumpen von Teichen oder Sickergruben. Konstruiert für ein Fallrohr D100mm und einem Schlauchdurchmesser von 25mm( 1 Zoll ) . Benötigt wird des…
Wydruk około 12,73 €–15,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My son wanted to pimp his motorcycle by adding an additional set of lights. On top of that each light would be pimped as well by adding a LED Halo. This model combines the following functions: A holder for the LED Halo (no glue required…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hi, I was recently disassembling a friend's scooter and saw the controller, and I got an idea :) A little bit of internet, a little bit of money and a built-in battery from another scooter brought it back to life. You will need: XT30…
Wydruk około 2,27 €–2,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
3 mm pane thickness bore for screws with 4 mm diameter
Wydruk około 1,32 €–1,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Please don't forget to like - I want my Prusameters! 😄 If you update from a previous 3.x beta, make sure to read the Release Notes, contained in the download. If you update from an 2.x release, please read the Setup Guide, contained in…
Here is a bed model and textures for Orcaslicer and Prusaslicer for the SV07 Plus. Also included are json configs for slicer settings for Orcaslicer. “Klipper Detailed” orca profile I use everyday for a balance of speed and quality with…
Please make sure to download the “ All Model Files ” and the “ All Other Files ” zip files so you get all of the .stl's and also the .pdf files that include the instructions and equipment placement drawings. (Link is near the bottom of…
No supports needed. I recommend 0.15 layer hight and 3 shells. Fusion 360 file included! Check out a video about this case by Matt Reviews It . Order a printed case from AltaVox and support Meshtastic through Open Collective
These Skadis-like plates were designed starting from the Parametric SKADIS Board Generator by Xuis , and added holes and feet. One measures 200mmx180mm, the other measures 180mmx180mm. I needed to add these boards next to the Printable…
This is an remix of a pair of handcuffs, desingned by sthone. ( https://www.thingiverse.com/thing:2487050 ) For the finished handcuffs you'll need 10 'Handcuff_Pin.STL' to hold everything together. A small hammer or vice can be helpful.…
Hi, this is my attempt to hopefully reduce the spread of the coronavirus or other germs, I call it the "Savegrabber". It is a hook-like device that allows the opening and closing of doors without touching the handle. There is also a tip…
Easy to print, no supports or any required. Now added 3 files for small printers.
Lock box with slide style latch. No pins or bolts needed on this one. 3 hour print on bambu p1p. 95grams filament. Tested in ABS, PETG and PLA at only 15% infill. Lock needs to be slid in to one half before locking two main halves…
A very quick remix of one of the parts in Tomas ' 100% Printable Clamp (Not only for Nipples! :-) to add a loop for attaching cord or chains . This is only the spindle part , so please see Tomas' original model for the other 3 parts you…
I've put 3 tables on top of each other, for this you'll need an additional set of adapters to fix the extra table. I made a basic set based upon the already existing "regular" brackets. I've added some additional holes such that longer…
Terraforming Mars Big Box – Additional Tiles – Complete Set I have designed some additional tiles for the 3D tiles of the Terraforming Mars Big Box: Cupola City Dawn City Domed Crater Field-Capped City Ganymede Colony Gyropolis Luna…
This mod is still in testing. I did not test this mod on the factory head! In the future, I will look into this and fix some parts. I developed this mod because I started noticing Z fluctuations when the bed goes below 100mm from the…
I noticed that every time I slow down spinning the hand crank the spool lifts up and out of the base. A few other people mentioned this problem as well in the comments. I added this small bracket and problem is solved. I used 2 small M1.5…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I enjoyed printing @Meister Edel's Pull Copter and wanted to try designing a…
Easily removable & refillable desiccant cases for unpacked silica gel for the Bambulab X1 AMS. This is a second version of this one , I added caps & humidity sensor support. Printing (<20min): PLA/ABS/PETG/… 0.4mm nozzle or less…
🧮 I designed a 3D-printable mechanical calculator that can perform ➕ addition and ✖ multiplication! Available in 2 Styles: 🔢 Basic Version Doesn't need an MMU or Prusa XL. 🐸 Froggy Version Print with multiple colours using the Prusa XL or…
I know many friends don't have lots sizes of screws. Therefore I made a screws-free version of this tool. Just print them how I place on face. And it's support free.
Remix of AndrzejG's model, that features a new "tear" 1x1 tray, the missing split color versions of 2x2, 2x3 and 3x3 trays, and a 1x1 card holder. All tray models are direct modifications of the original 1x2 split model, so everything…
Remix, no top switch cutout and Bambu branding addition. Only right side of the model was modified.
Introducing a truly exceptional tool for math enthusiasts of all ages: Our 5.5 cm diameter fidget spinners cleverly combine fun and learning! ✨ These spinners encompass all four fundamental arithmetic operations – addition, subtraction,…
There are many battery holders for the DJI goggle 2, but I always had the problem that the weight of the battery caused the strap to press hard on my ears. This additional strap holds the goggles in place and distributes the weight. You…
The spiral is an add-on for my marble run. It can simply be attached on top. This is required and can be obtained via the link below: https://www.printables.com/model/1728016-marbel-run Printing instructions: Supports required (supports…
Elevación con ventilaciones para la K1 con bisagras 9/5/24 Se añadió la parte trasera de la K1, va justo para que no se levante por el movimiento del teflón Para hacer la elevación completa como en la imagen se necesita imprimir : 1…
All English and Polish letters as cookie cutters. Based on Aklatanic font (created by me over 20 years ago) with some changes for cookies rigidity. If you need letters for other languages let me know. Print tips: Place it flat on the bed,…
Summary Displaying a lot of small items in the shelf but they come with only 4 levels. Tried a few existing designs if found them unsatisfactory and decided to redesign them. There are left and right but you can use just one for all 4…
After printing a couple of boxes from Termlimit I saw that the source from Sttrife included the SCAD file, so got about making some extra configurations to suit my needs. Of small note... the groves along the outside are a little shorter…
I just added some cut-outs to the dividers, based on a real beer crate design. This makes it easier to slide the batteries in. Thanks to CAD-Guy for the great design!
Es ist nicht notwendig das gesamte Grundgerüst neu zu drucken! Der Halter für das dritte Lager (608) wird einfach direkt neben der Durchführung für die Achse mit der Getriebeschnecke auf der Grundplatte montiert. Dazu muss entsprechend…
A simple and discreet support for the Ender 5 bed cable. No fixings required! Buy me a coffee
Tool Rack addition to Prusa Core One Side Storage. Adds storage for screwdriver and needle nose pliers that come with Core One plus a pair of Diagonal Pliers as well as additional bid storage. Had to Super Glue new rack to side storage to…
You should be able to use the existing hardware from your microphone to mount these to these little clips. I have not tested this on other kinds of rims , only on my Ludwig EPIC Funk drum rims. It is likely you will need to remix this to…
The remix version of the realistic handcuffs doesn't have a key, so I made one.
This is a sizing remix* of Leon H's "most excellent" Cable Duct Parameteric project. https://www.printables.com/model/824381-cable-duct-parametric To quote him, it is, "This fully parametric cable duct is designed to help you neatly hide…
This is a case for a servo tester. You don't need any extra parts, just the servo tester. It consists of two parts that are snuklie together.
V-Slots and Junction Plates I took the 20x40 V Slot file posted by FLAVIENK and expanded upon it by making a 20x20, 20x40 (modified), and 20x60 V Slot. I also added some reinforcement internal beams to eliminate the give of the sides. I…
Added few more mounting plates: Intel 7th gen NUC, unscrew front screws and pull into the mount, then screw them back to fix. TP-Link managed switch TL-SG108P(E) mount. Additional plate to mount power bricks and wires.
Object description: I made some new symbols based on the cable tag design from Alego. Update 2023-11-02, new symbols added: Drilling Machine Jigsaw Table Saw Chop Saw Hand Circular Saw Flex Compressor Available Cable Tag Symbols here:…
I was having issues getting the hinges to print properly without them fusing together even with modifying flow and resolution on my Ender 3. I added an additonal 0.1mm gap on each side and it seems to print perfectly. Print Settings…
Easily removable & refillable desiccant cases for unpacked silica gel for the Bambulab X1 AMS. Printing (<20min): PLA/ABS/PETG/… 0.4mm nozzle or less preferably No support Fill with silica gel, preferably with color indicator. Tips :…
This is a remix of a remix. The original idea is from this Remix on thingiverse from vfrman. A rear mounted electronics case for the Ender 3 or Ender 3 pro. It includes space for the following parts: A Raspberry Pi 3B+ The original Ender…
This make includes 5 new ships models for the hi game battleship! (see image attached for compatibility check) Includes 3 Spot Yatch 4 Spot L-Shaped Aircraft Carrier 5 Spot Plus-Shaped Shipthing 4 Spot 2x2 Dock/Raft 3 Long but Diagonally…
The wall mount support has to be screwed directly on the case with 4 M3 x 10 mm screw. Be careful when installing, the screw are fixed directly in the Raspberry card. The support is directly centered in the 4 holes of the case, so it's…
This additional heavy base is designed to prevent the original brass heat-set insert tool from tipping over. Print it and fill it with any heavy parts you have lying around (I fixed the inserted screws with wood glue to reduce noise). Use…
Slowly adding low poly pokemon to this size of game piece. Needed some chonky boys to throw balance off!
The next set of icons :)
This is stand for Mac mini M4 to hide additional drive and HUB below Use PLA/PETG/ABS/ASA filament
This is an extension of the set introduced by Customized Sanding Sticks with Labels ( Thanks Fuchsr ! ). In order to make the set on the included photo you can e.g. purchase set(s) over here…
Update the Main Spool Spindle to fit different spools.
Credit for the original design goes to @Fox_exe, original design here: https://www.thingiverse.com/thing:3668657 Added parts and remixed some other parts to improve things - stand has a better joining mechanism with the ability to bolt it…
Zusatzgewicht für Spulen in der AMS. Ich habe das nicht erfunden, das ist aber meine Variante. Ihr kennt das bestimmt, wenn manche Spulen zu leicht werden, fangen diese an zu rutschen. Bis jetzt hatte ich bei Bedarf ein kleines…
Instructions on how to install this can be found on the original page . Modified to allow mounting with the stock carriage screws, as well as to provide room for the endstop cable. Also modified the heatset slots where the sensor mounts…
A simple to use ceiling mount for the great Logitech MeetUp mic. Put a hole (~100mm) into the grid ceiling, add the lower part, put the mic in and fix it with the upper part.
additional parts for VZbot: -Probe vario mount frontside (right), if you need on left side (like in the picture), please mirrow it in your slicer -Probe vario mount backside -BL-Touch mount for vario mount short (fits to common UHF…
Using the Filament Spool Switcher & Winder from Miklos Kiszely I noticed that when reducing speed the spool was lifting up from the spool holder I printed first the Filament spool winder additional bracket from jchau57 but didn't like the…
Additional set of alternative Mini Mixing Pads I really liked the Disposable Mini Mixing Pad model. But I would have liked another arrangement of pads and spatulas. I think the mixing pad can find many different uses. All my variants are…
Additional cooling for DEYE 20kW LP . I had to divide the model into several parts due to its size. It is a prototype without speed control for now, then a PWM controller from Aliexpress will be installed later (search for " EGBO DC12V 3A…
This is a remix of VladTheInhaler's excellent Knitting Loom: Snap-Fit with Row Counter , to add some pieces they didn't include. My model adds many types of things: XL and Large counter links and the dials to go with them. Updated dials…
An additional storage space that fits the IKEA Malm series. The are 2 STLs, one for each side. Print instructions Category: Organization Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: No Notes:…
I wanted some additional egg designs for my giant Lego wreath. I created a polka dot pattern and a chevron pattern using the plain egg in OnShape. These eggs will need to be printed with supports just like the original painted eggs.…
I really liked the nozzle holder, but for me the magnet was too weak and I wanted to store the Prusa Nozzle Replacement Tool ( https://www.printables.com/model/1237212-core-one-nozzle-replacement-tool ) and a Nozzle Wrench for the…
I've remixed GTGeo 's files so that you can more accurately represent your MLP if you have already built your Farscape1 LUT.
If you need to add an extra wire like for the eddy take the 2 hole versions from the original project: https://www.printables.com/model/958211-sv08-guided-cable-clips and add the same amount of the files of this project.
Additional tracks for Go Go Smart Wheels - Tut Tut Bolides...
I loved the original model, and I wanted to use it for every cable I have in my house. Unfortunately some icons were missing, but the original designer also but a blank template to use, so I designed mine and I'm sharing them with you…
Elegoo MercuryX Wash&Cure station is a nice device for resin printing. Unfortunately, Elegoo does not sell replacement washing tanks and it is too small for large format printers. This model allows you to turn a common Ikea 365 container…
ATTENTION! THESE ARE ONLY ADDITIONAL FILES, WHICH I HAVE PACKED INTO A REMIX FOR CLARITY! THE FOLLOWING LINK WILL TAKE YOU TO THE ACTUAL MODEL: https://www.printables.com/de/model/903990-magnet-organizer-magnet-dispenser-magnet-revolver…
These keycaps are meant to fit the ZSA Voyager keyboard to allow for more thumb keys. The default configuration for the Voyager keyboard only has 2 thumb keys on each side. I found that too limiting, so by eliminating the number row, all…
I prefer concentric infill on the bottom layer and octogram spiral for the top for the lids. The box needs supports, the grid option works well and is easy to remove.
Additional Ender 2 Pro rails for the aluminum profile under the heated bed - 70mm on the left and 65mm on the right.
When testing printing with ACE Pro I found that the original extension from https://wiki.anycubic.com/en/fdm-3d-printer/kobra-3-max/8-input-and-1-output-module was not as stable as I was hoping for (without using e.g. metallic tube…
This is my first ever functional design. I'm definitely not an expert, I'm still learning a lot about 3D modeling and printing, so this was a big practice project for me. It might have some small errors or issues, but it’s working pretty…
This is a remix of the awesome ambulances by hoguemr. I just added the numbers also on the windshield and made the holes for the dice a little smaller for a tighter fit. Print instructions Printer Brand: Creality Printer: CR-10S Rafts: No…
This thing is to help the internal fan of your Tacx Neo (every edition!) to get rid of the heat. After reading so many complains about overheating Neos I decided to design a fan mount which helps the neo to suck air out of the housing to…
This is a Filament Dryer mod for a standard Food Dehydrator Recommended settings: 2 walls above gyroid 10% preferably with 6mm brim Preferably use a Cold Grip Plate like the Biqu Glacier plate No Supports needed All printable in 1 plate…
Keep your supplies organized! Fits an inexpensive Harbor Freight Ammo Can. Let me know your thoughts! Please credit if you spread the file.
These are longer panels for BeamCase Sandwich V3.0 with 15x15 Aluminium profiles that are between 300mm and 360mm long. The panels come with and without integrated handle, as well as version that are split along the length or one piece…
Its that time of year again. Don't light the black candle or the Sanderson sisters will be back! Just kidding, but who doesn't love a little bit of Hocus Pocus?! Now you can decorate your indoor letter board with the sisters silhouettes…
Additional roof/ceiling sections, one inside and one outside.
Variants: 3 Way Joint w/ 4" x 4" post leg 2 Way T Joint w/ 2" x 4" construction Follow the print settings from the original models.
Box for additional gauges in bmw e34 with place for iPhone 15 pro with induction charger
Adds more room for you to be able to clip the side of the couch to the base much easier.
Additional SA keycaps for Logitech G710 These are not printed yet, still doing the original SA keycap set. If you get the chance to print these, please drop a comment . 2018-03-22: added R2-4 3u, used for RShift. 2018-03-21: added R3…
Added additional height to the top shelf for larger characters
This is “ THE BLACK HORNET p2 ”an addition “ THE BLACK HORNET p1 ” (a bubble wand with approx 10cm diameter) The wand structure consists of four parts ( please refer to the colored picture above): Part One and Part Two - upper ring…
Solder stand with Tip Holder addition (Vacuum Desoldering Pump) Solder stand with Tip Holder files https://www.thingiverse.com/thing:2947275 Plier addition https://www.thingiverse.com/thing:3114598 Print instructions Category: Electronics
Yo dawg I herd you like pegboard, so here is a pegboard for your pegboard... Ok, some explanation on why this might still be useful: For example, if you hang longer tools like screwdrivers on the pegboard, they obstruct a lot of valuable…
Hello, Worms are happily doing their thing, but the holes in the bottom of the first level are big enough they they keep falling through. Item one is a frame over which I stretched out an old stocking, does a great job of letting the worm…
![Airport Runway - Heliport - Additional Modules - For the bigger planes [update]](https://media.printables.com/media/prints/993294/images/8427266_22affb0f-49b6-456a-8e5d-bca7c179d5d7_d63b2d5f-d953-45ef-a66a-3ee597d1abe8/pxl_20241220_heliport_01.jpg)
![Filament Spool Switcher & Winder Additional Bracket TPU no Screw [REMIX]](https://media.printables.com/media/prints/d4e0fe21-e8ff-4dcb-a95b-f2460bb211fe/images/9859792_32c85c26-2fc4-42c5-b4d4-88c76ddf0903_edc52f01-9571-4a31-ba77-b7987b6be9eb/filament-spool-winder-additional-bracket-mk2-jc-8-800x600.jpg)
