Wyniki wyszukiwania: almost

Almost perfect cotton buds/swabs container

Radius gauge, no maths (almost). 2 versions

This is a remix of Thyn's Radius Gauge for calipers. Initially I just added some nice fillets and made sure it fitted my plastic calipers and when I tried it I saw that a 38mm diameter cylinder yields a measurement of 7.9mm. Multiply by…

MMU2S Extruder MOD feeds almost any tip / NO jams (For me)

This modifications of the original prusa MMU2S extruder, were the only way i could make it work properly (for me). It has been really frustrating months, there is a lot of ideas you can find searching in forums, i tried all of them and…

Almost every Dandys World Toon

Upload of almost every Toon just incase the maker world controversy is true and to make the Dandys world models more accessible

RC Car V2 (almost) fully printed

18/12/2024: Well if you are into Dodge trucks chances are you are not looking for a french car (!) But anyways you could give a look at my new model the Peugeot 3008 RC chassis and body . 08/11/24: Added a missing STL in the gearbox:…

DJI O4 Pro/Lite Pod Mount: FPV Max-FOV, almost any quad/tilt/ND

Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your O4 Pro/Lite camera with TPU in front of the lens for maximum protection but…

spot robot dog. (Almost) print in place.

My take at making the famous robot dog Spot. Uses my gen#4 ball joint design. Gen#4 is gen#3 plus a small plate covering one side of the hinge, making it more discreete. You may have to unstuck it with a little twist of screwdriver…

The ultimate spool clip that works with almost all brands

Of all the filament clips I have received and printed, I have always been happy with the filament clips supplied by Sunlu although they are not compatible with all brands of filament. That is why I've made a Filament Clip from Sunlu's but…

Muscular discobolus almost no support

I didn't make this scan; I found it here https://www.myminifactory.com/object/discobolus-at-the-british-museum-london-7896 (BTW their Scan The World program is fantastic!). I believe this discobolus is a modern retake because the head…

Anycubic Kobra S1 Fan duct (almost 360°) for upgraded hotends with ceramic heater (not for stock)

Was looking for a good fan duct with 360° cooling and good nozzle visibility of Kobra S1 and decided to make this one for upgraded hotends (with ceramic heater). The model is easy to print with or without supports (up to you). Please…

(Almost) Invisible Skadis hook

Most design seems to have the “hook” part further down, leaving the part that goes into the board visible. I put the hook at the top and then whatever hangs there usually hides the bottom part of the hook so it's close to invisible…

V2 Party Glasses - Use up the almost empty spools

Easy and fast print. For the joint just insert some filament(1,75) . Perfect to use up the almost empty spools! Give it out on parties, it's a great conversation starter!

FLSUN SUPER RACER SR - almost radial fan duct

Hello, Fan duct for flsun super racer no supports!,

Almost fully 3d printed working airsoft pistol

Disclaimer: it doesn't really shoot that far but im currently trying new ways of improving it IMPORTANT!!! The 3 magazine parts are in the bottom right of the stl, the three trigger parts are in the top right, and the 2 shell parts are on…

UPDATED - CROCS Strap Pin Set (any color you want) almost unbreakable in PCTG

CROCS Strap Pin Set (any color you want) I have some white CROCS with a black pin, and wanted a white pin. I used a white paint marker to cover the black up, but this is better now. You can print in any color of PCTG. I designed them to…

Almost fully printable Ball Vise - no screws need, just the silicon tubing.

While the original Ball vise is fine for those with a selection of hardware on hand, that's not me. So instead of buying a bunch of bolts and such, I modified the files so everything can be printed, except, of course, the silicon tubing.…

LED strip clip, almost invisible (12mm)

this clip holds an led strip at the wall. It has been modelled for an WS2812b strip that is in a silicon tube. the tube measured 12mm x 3.6 mm, the clip leaves even a little more space so the strip goes in without use of force. They are…

Wind Turbine - almost fully 3d printed - easy to make

I created this effective HAWT - It is fully 3d printed except for stepper motor and rectifier. I recomend to use 2 real bearings 6202 or other 35x15x11 dimensions bearing. These effective blades were reshaped from guy Yerai from…

10" Inch Network Rack (3U+4U+5U), Standard Dimensions, almost full printable

##English## Here is my almost completely printable 10 inch rack from 3U-5U. All parts fit for the P1/X1 Bambu printers, 6U would not fit anymore - and here I would go for a finished rack for stability. PLA or PETG works, the example with…

Sovol SV06 Plus almost screwless universal Cam Mount

I could not find a mount i liked for my printer so i made a universal (web)cam mount for the sovol SV06 Plus. Maybe it will also fit on the SV06?? I'ts a remix from another model and i put in an extra joint to have some left to right…

LED Christmas Tree (almost vase mode)

The tree should be printed in vase mode, pay attention to the number of base layers to ensure that the base hole gets printed with no issue. The base should be printed normally without supports Warning: trying to persuade the lights to…

Almost Perfect Ender 3 Tool Holder

This is my 4th iteration of a tool holder for Ender 3 and is almost perfect: Compact for plastic use Fits all stock Ender 3 tool + caliper Tools will not bump into each other No text on it, but with space if you want to add your own.…

Shelly, the Almost Born Chicken

No supports needed. There is no actual chicken inside.

No Gravity Base (almost) for LUCKY-13 - 100%/150%

Base 100% and 150% for Lucky-13 on which you can fit the feet, which allows positions that do not have to be concerned with the gravity and lets present a model without apparent linkage. I was inspired by SOOZAFONE on this link:…

Tea bag waste basket (compatible with almost any cup/glass)

Its best to print it upside down, as it requires no supports if you have good bridging on your printer.

PSVita TV "Almost" Vertical Stand

This is my idea of an almost vertical stand for the Sony PSVita TV. Of course making a simple square shape hurts my brain, so here is a very specific irregular shape that's closely related to the PSVita TV itself. The design itself…

The (almost) Perfect Master Spool

New Version Released (V14)! Not compatible with old (pre-V12) version! This project is still in development so any feedback is welcome! 😊 Everybody knows there are a lot of master spool designs available for the Bambulab refill filaments…

Almost Impossible Heart

The Almost Impossible puzzle applied to a heart. Instructions Print the 4 parts and assemble (if you can!). The openscad has a parameter that defines the spacing between the pieces. The supplied STLs were generated with a spacing of…

The Almost Impossible CUBE Puzzle

Are you ready to truly test your spatial reasoning and puzzle-solving skills? You'll have four pieces. At first glance, assembling them into a perfect cube seems straightforward. But as you begin, you'll quickly discover the ingenious…

Pimax Crystal (Light) or almost any VR HMD Wall Mount

Designed to accommodate the depth of the Pimax Crystal (Light), but it should work for almost any HMD. (Not suitable for PSVR2 due to how the visor is attached to the halo + the facial gasket is so soft it might hit the lenses). Spreads…

Almost Impossible BB-9E Star Wars puzzle

This is based on the the apparently impossible cube, where I used the designs template , to make a spherical design with a clockwise and anticlockwise thread through the body, which means the segments need to be in the right order for it…

Stubby M-LOK (Almost) Vertical Fore Grip

Simple, stubby, cut to length if needed. Requires x2 m5x8mm screws and x2 M5 MLok t-nuts. Minimal organic support needed to support inner geometry. Print solid. Fuzzy skin is nice.

Kiss Coasters (The Band) Remix MMU almost Flat

Once placed on your print bed, use multymaterial painting tool on smart fill to highlight the areas you want filled, ( you should see the zones of the faces when you wave the mouse over once the smart tool is selected) if you want to do…

Sundial on octagonal base configurable for almost any location

This sundial and its square predecessor referred to above are designed to be used and therefore mounted in your garden or yard. For that reason they must be fabricated from a heat tolerant fibre such as Pet-G or betters still ABS etc. PLA…

(Almost) Universal Spool Weight for QidiBox MMU Unit

An easy to print container for lead pellets that is easily sealed with a single M6 BHCS. When filled with 2mm diameter lead pellets this will weigh in the order of 826g, but final weights will vary depending upon what weight material is…

Almost perfect Beard Trim thing !

The design is not perfect but I have shared the STEP file for modification, enjoy !

Miata MX-5 ND almost invisible action cam mirror mount

This holder can be attached to the mirror of a Miata MX-5 ND 2016. The diameter of the mirror holder of the Miata is 19.2mm. The clamp is designed according to this. I kept it minimal as possible to reduce weight but still keeping it…

Concrete filled almost totally printed mini CNC

This is a CNC mill that is printable, with the exception of some hardware for the linear rails and drives. The Z-axis is a premade aluminum, using in what i believe is the 3018pro. The chassis of the CNC is glued and several M6 threaded…

Reuleaux tetrahedron - Solid of "almost" constant width (OpenSCAD)

After watching Angus video, I got curious and decided to experiment with the concept of "solid of constant width". https://youtu.be/2eUWT9cI23o I implemented it based on a tetrahedron. [Update 06/05/2017]: It turns out that this shape is…

ALMOST UNIVERSAL CAM HOUSING

This is an almost universal camera mount (All you need is a surface where you can stick it with double-sided tape) it was created mainly for a 32x32 mm innomaker, easy enough to find on Amazon or AliExpress for your 3d printer InnoMaker…

Soldering Fingers & PCB Vise (2-in-1) Almost print in place!

I designed this 2 in 1 , Solder Fingers & PCB vise as not to have too many jig cluttering my desk. The solder fingers has the usual wire slot fingers and additional rubber band clamp for unusual wire that wont fit in the wire slot…

Neuschwanstein Castle (almost)

Repaired the mesh, but I saw that's not really castle Neuschwanstein. Uploaded the repaired model anyways, but did not print it. For a correct model see:

Neo Stiffy Toolhead Gen2 (Powerful but costs almost nothing)

This is a powerful yet inexpensive toolhead for the Ender-3 NEO series, featuring two 5015 fans for superior cooling. The previous version of this toolhead can be found here:…

Planetary gear box 7x7=49x, M1,25 almost 3000n/min OPTIMIZED

I am thankfull for coments:)

Almost invisible shower gel bottle holder

This is a very simple but very useful thing (IMHO). It fits to a 150mm size shower faucet and allows the shower gel bottle to be placed basically within the faucet. So it does not consume any additional space within your shower. When…

Snap Close Clamp - ALMOST Fully Printable But With Spring

i have always loved the snap close connector by @electrosync , but once i started running low on bolts nuts and washers, I looked for another model that was fully printable, but i was not a fan of the plastic springs, did not have the…

The almost ultimate DIY Speaker

I am going to upload videos about this project explaining the assembly soon. (The following information is gonna change a lot untill i delete this sentence!! ) A list of the things you'll need: must haves: 2x the 3D printed frame1 2x the…

Silica Gel Containers for almost every Spool brand

fits spools with an inner diameter of 52mm and upwards

Smart Phone and Tablet stand | 3 angle options | Fit for almost Smart Phone and Tablet From 7 inches and under

This stand have 3 angle options fit for almost Smart Phone and Tablet From 7 inches and under. If you want to use this for bigger tablet you can x2 size when print it.

Piggy - 3lb Combat Robot | Almost Fully 3D Printed! (V1)

Hi there, my name is Aaron and I built a 3lb combat robot! The files are not beautiful, but it works! Github: https://github.com/AZ3Dp/Combat-Robot-Repository

Boltless tracks (almost)

2019-07-26: i just want to add some information since i had time to test these. There is a risk with some motors that these won't hold for the force of of full throttle. In fact, i see tendency of breaking the tracks with a full throttle…

Cheaters Dice, but it (almost) always rolls 1

This dice has its weight not evenly distributed, which means that the chance to roll certain numbers is more common. Here it is the number 1. But why the number 1 and not 6? Rolling a six gives you an advantage, but seeing the other…

Prusa Mini Almost Centered Extruder Mount

Exactly as the name suggests, this mount moves the extruder closer to the center of the X-axis, not enough to be perfectly centered as the original Lajbror creation, but enough that X-axis moves no longer have discrepancies in extrusion.…

m-ATX almost naked housing

Update (V3) and finished: closing minor gaps at front patch and base 4 - all works! Update (V2): Two slight modifications: Mainboard is a little bit wider than expected -> changed Base-3, GPU sits lower than expected -> changed GPU-mount…

V1E LowRider 3 - almost pointless, pointy Dust Flaps

More details and discussion on real solutions welcome at https://forum.v1e.com/t/lr3-mod-diverting-shaving-piles-avoid-excess-shavings-in-under-bearing-wheels-causing-inaccuracies/34020

Qidi Plus 4 Almost Stock front carrier plate

Qidi Plus 4 Stock front carrier plate uses self tapping screws, This model is designed to put heat inserts on it. I printed mine with ABS GF( this warped on me when doing hours of heated chamber) Reprinted it with PC CF I used m3 heat…

The "Kestrel" // An (almost) fully 3D printable foam dart Stringer Blaster

This is the “ Kestrel ”, My first foam dart blaster design! If you have any feedback or find any problems, please let me know! The top loading system is back, now with all the issues cleaned up! PRINT THE END OF THE BARREL IN ORANGE!!!…

(Almost) invisible 1/10 car model wall mount V1b4 (WIP)

Dec. 06, 2025 V1.0b4.0: First release on printables I love the car models designed by Cormango and have already printed many of them. You can find the models here: Printables: https://www.printables.com/@Cormango_846973 Makerworld:…

Microscope objective Funnel stops - fits (almost) any model

Funnel stop design for microscope objectives, fully customizable in OpenSCAD It offer many options to fit most objectives; can also generate other stops like Condenser darkfield stops, eyepiece field stop etc. The Funnel models are…

Almost ultimate Y-axis belt tensioner

I really like the simple and function design of the original G.design model . However, it carries over two flaws of the original Prusa's design: A lack of adjustability along the X-axis necessary to align and reduce the sideways pressure…

Unbreakable Ball (Almost)

I tried my hardest to make something almost unbreakable and its finally here, introducing... Unbreakable Ball (Almost)! We can't promise this being unbreakable but it will stay afloat in water, survive most of the harshest of…

Garten Gerätehalter für so gut wie alles/Garden tool holder for almost everything

Garden tool holder for almost everything Garten Gerätehalter für so gut wie alles

Terrace Board, almost screen accurate

This is my second attempt at the terrace board. for the momment I'm stuck using tinkercad. Its all I know how to use. This one is more faithful to the original. I'd even said that its about as screen accurate as I can get it while still…

Cable Clip (Almost Indestructible)

I saw a bunch of cable clip stls online but pretty much all use PLA or PETG as the material which limits long-term use. So I designed one to be printed with Polypropylene, probably also would work with a very hard TPU. It snaps…

(almost) solderless, reusable micro:bit timer

Micro:bit boards are brilliant little platforms. I needed a fun replacement for a three minutes hourglass timer and imagined a device working with what I had at hand. Since I wanted to be able to reuse my Micro:bit board for other…

Huge wall mounted clock ( almost 1m diameter )

Huge almost 1m diameter Art Deco stylized wall mounted clock, inspired on Coupatan Electric clock from 20's of XX century. This project features a standard high torque clock movement fitted with 350mm (13.8 inch) clock hands. I’m also…

Adapted almost perfect Ender 3 Tool Holder

I remixed the part to suit my needs better. Its a bit shorter and flatter now and can fit my iso-spraybottle and a brush

Spool Holder for my Rook 2020 - Almost exact copy

REMIX FROM: https://www.printables.com/@Nahuel_114346 I designed this spool holder to hold a spool with 32mm inner diameter or bigger, and with 70mm width max. I've been using it for a while and is stands perfectly. You'll need 2 608ZZ…

Chess Game I THE [ALMOST] SEVEN WONDERS OF THE WORLD I DIE [FAST] SIEBEN WELTWUNDER

deutsch_ DIE [FAST] SIEBEN WELTWUNDER Unser Ziel war es, Architekturikonen zu Spielfiguren zu abstrahieren und zu entwickeln. Da kam uns der Gedanke: Welche Gebäude sind die ikonischsten und bekanntesten Gebäude der Welt, sodass sie jeder…

Cubify void - make a puzzle out of (almost) any shape (supports holes!)

make a 3x3x3 from almost any shape even if it has a hole! based on the void cube. Stl's are for example. I call the examples the "ghost void cube" and "bumpy bead". Print instructions Unassociated tags: customizable puzzles, puzzle cube…

Penrose Skewb (almost) stickerless

Faces need to be glued. BOM (assuming you want to have faces of colours A, B and C, inside of colour W): N Part Colour Count Source 1. 20mm M3 Screws Any (-: 4 drawer with screws (-; 2. 25.6mm 4 axis skewb/pyraminx core W 1…

Filament Dry Box with Inside/Outside Humidity Sensor - Almost Entirely 3D Printed Parts with Prusa Attachments

V3 UPDATE 04-Nov-2023 - Created hygrometer mounting plate for simple set of sensors, removed adafruit sensor thing; updated spindle spinner to include spinning handle for each part; updated spindle holder; added blank spindle plug to fill…

Oscar statue - wall sign - almost flat

The almost flat Oscar decoration is a shadow with reliefs. It has been created for a decoration of an “Oscar” celebration. Layers allows printing with 2 colors. Gold and Black recommended. I used Amazon Basics PLA made in USA for the…

AlmostVintage: A way to prettier storage

Prettier than the raw box. Enables almost girlfriend-approved storage boxes based on Prusament filament cardboard boxes. Print instructions Spray paint is optional, but advised. It does a lot for the look. The model should be thought of…

Balancing - The Stackable "Almost cube" Game

Challenge yourself with the stackable "Almost Cube", my first ever contest model, with different face dimensions on all six sides. Multiples of 2.5 degrees, print files provided. No supports needed, print flat. For other makes of 3d…

Phone stand for almost everyones cellphone

Simple phone stand for almost every cellphone. Easy to print. Have fun! Material: PLA/PETG Infill: 15% Layerheight: 0.2mm

3D printer test cube for almost no filament!

it has letters and overhangs. produced by Rea production industries.

Almost 2nd Place to Dwight Schrute

This is a trophy to emphasize to your coworker how they could never measure up to the greatness that is Dwight. With a falling star symbolizing their place in the office. “D.W.I.G.H.T. Determined. Worker. Intense. Good worker. Hard…

Prusa Mini - Almost Centered Extruder remixed

This is a fix for uneven extrusion on the Prusa Minis X-axis, originally researched by Lajbror . My mount is based on the Remix made by Russell B , made originally because I had warping issues with his design. The final version by me…

The magic of supercharging almost anything

Turbo

Insert Almost innocent

Petit insert pour le jeu almost innocent. le rangement petites cartes dispose d'un séparateur pour les cartes spécial et celles non utilisées dans les premiers scénarios. ( septième carte de chaque catégorie. impression sans support ni…

Almost unspillable water bowl

This is almost unspillable water bowl useful for e.g. cats that hits the bowl before dringing from it - it reduces the amount of spilled water to zero in my case. Useful volume around 600 ml. Print from PETG, 0.2 mm layer height (or…

Sensitiv Storm Guide Almost All Parts Printed

Montageanleitung wird nachgeliefert!

Remix of (almost) fully printed GoPro steady cam

Although it IS possible to print the GoPro mount which HamOp included in the original, it requires support which I wanted to avoid. Instead of this piece, I made an alternative which takes a GoPro tripod mount. (I bought one of these on…

Universal Handle for almost everything

Designed to repair my little daughter's speaker handle that unfortunately broke and I thought it could be very useful to anyone. It is a very cool design that can be used to put a handle on almost anything, since it rotates and adapts to…

Almost Famous Poster Print

Size: 149x221mm Print at 100% infill with a layer height of 0.12mm with a base layer of 0.32mm Filaments Used: PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Basic Orange Transmission Distance: 10 PLA+ R3D Light Skin…

Aroma oils stand - Pyramid II - more bottles, (almost) no supports

There are similiar models: https://www.printables.com/model/1163921-aroma-oils-stand-pyramid-21-bottles https://www.printables.com/model/1160984-aroma-oils-stand-20-bottles

(Almost) all print bolt action pen

There are few 3D printed bolt action pens, but I couldn't find any without use of hardware. Spring being obvious exception. So I designed one. Refill is pretty standart (K-I-N 4442) and spring is approximately 4,2x25mm. Assembly is sort…

Grond's Head (Almost) | Middle Earth

I spent many weeks working on this head as my first organic creature model. It's originally supposed to be Grond from LOTR: The Return of the King , but I deviated a bit to make my own version. The File is very large. Sorry about your…

Dispenser for almost anything

A container that rolls down and can be used to store anything circular if you size it up or down.

spool holder too prevent drop over when almost empty

when you spoolholder, like on the picture. when the spool is almost empty it drops over. too prevent that I created this model, Nothing moves only when it want to com off the holder it will be prevented. The holder you cannot print it on…

McMillan TAC 50 (almost)

Clip - Perfect For (almost) Anything!

Print Settings: Layer Height: 0.2mm. Nozzle: 0.4mm. Infill: 10%. Perimeters: 3 Walls. Material: PLA. Support: Required. Bed adhesion: No.

Almost dead doorstopper

You do not need supports, just print it from the bottom of the face up.

Lazy Susan - almost entirely printable

Krom tištěných dílů potřebujete - staré kolecko z 3d tiskarny - 1x šroub M5x20 -1x matičku M5 ************************************************** In addition to the printed parts you need - an old wheel from a 3D printer - 1x M5x20 screw…

Almost bear statue

Hello, almost bear, minimal design figure. Thanks for your download, enjoy the print!

Parametric BLE Tracker Bike Mount - Almost Waterproof with TPU Seal

Parametric Bike Mount for Retangular BLE Tracker. A parametric fusion made mount for tracker or other small enclosure-needed things. It is almost waterproof since it's TPU seal don't cover the whole perimeter. It have a Fitting to place…

Volkswagen logo (Almost full size)

In order to make it full size; Measure it to 4.75 inches (120.65 mm) And BAM!!! There you are!

Almost Tetromino Cube

Hi! I am 200inventie! The puzzle's purpose is to make a cube out of these shapes. Have fun puzzling!

Creality Ender / almost any 3D-printer filament holder

Design Concept This 3D model is aimed at simplifying the organization of filament spools for users of Creality Ender and other compatible 3D printers. The design makes a smooth rotation and easy access to filament. You only need a pair of…