Light Baffle for HOMEbox Ambient Q60+
Print it with 0.15mm layer hight and black matte PLA. The notch simplifies installation. This makes it easy to screw in. Use at your own risk.
- Pobrania
- 208
- Polubienia
- 24
- Ocena
- 0
Liczymy pasujące modele…
Print it with 0.15mm layer hight and black matte PLA. The notch simplifies installation. This makes it easy to screw in. Use at your own risk.
Ford Focus MK4 brackets to stick the Aliexpress ambient footwell LED's on. The brackets will fit into the original mounting positions where normally the factory ambient lights will be installed. Somehow left and right have a slightly…
Things you wanted to know before: Be aware of the effort involved in this project, you can't just put everything together in 10 minutes. You should also be good at soldering and know how to handle cables. It took me about 3 hours to…
Simple lamp printed in vasemode. 0.2mm height, with PLA matte the lamp has a 6.5w energy-saving led bulb assemble both parts with an e27 socket or hang it without a base to your ceiling
I made this model so I can install the horizontal poles which are 22.5mm ⌀ and the tent poles are 16mm ⌀ but the pole fixture was 22mm ⌀ on the original piece, so I decided to design a custom model which fits my needs, hope I can help…
I needed a home for my Ambient controller PCB for 3Dprinter enclosures. So I made this box. PCB and Code now available here : https://github.com/acekrystal/Servo-Ambient-Controller I had a few requirements : Fit inside IKEA LACK table and…
Probe and cable holder for the Thermoworks Ambient Air temperature probe included with some of their system. It prints in two parts that slip fit together but could also be secured with CA glue if necessary. It is part of a completely…
Мой Carlinkit имеет сильно греется, поэтому установил дополнительный радиатор который мешает прикрепить Carlinkit на двусторонний скотч. две детали необходимо склеить суперклеем, что даст ровную площадку и место под радиатор
The anemometer (wind-speed detector) on my WS-1200 was destroyed in a hailstorm. The rest of the weather station was completely undamaged, so I didn't want to just trash it. This is my replacement part. I don't have them to compare with,…
Esta es una alcancía ambientada en Minecraft que tiene un diseño normal pero se puede ambientar con las letras y colores, para el diseño de las letras utilice un abecedario de Minecraft que se puede descargar en Printables ( en mis…
A small and compact ambiance light powered by a USB-C ESP32 D1 Mini and a WS2812B LED Ring , running WLED for full RGB lighting control. Bill of Materials The lamp was designed to perfectly fit the following components: USB-C ESP32 D1…
PLA works just fine
I’m using the sensor in my Prusa XL enclosure. It’s controlled via the ESP32 camera . I soldered the wires on the camera side and routed them through the lower ventilation slots of Michael Fanta’s ESP camera case . Inside the sensor…
A stylish stand for an Ambient Weather WH31 temperature/humidity sensor. I think the thermometer is the same as the Ecowitt WH31. (I believe Ecowitt makes the Ambient Weather product.) Printed on a Prusa Mini+, 0.2mm layer height, 2…
The lamp consists of three parts. A base for an E27 socket (41 mm) or a Bambu LED Kit 001, a lampshade and a top cover. RGBW Zigbee bulb used. The cover can be blind or with seats for zigbee buttons. Xiaomi Mijia IKEA STYRBAR (white) The…
I designed a simple bracket to hold two IKEA TRÅDFRI E27 bulbs behind my monitor. It mounts using the standard VESA 100×100 pattern and has clips that fit a common type of E27 socket. I also added a newer version that holds a C7/C8–style…
Hue White and Colour Ambient Lightstrip Plus Table Mount
BOM: Printed with ROSA3D High Speed PLA Signal Violet This candle holder is all about the atmosphere. The design consists of tall, vertical ribs that encircle the flame, creating a cozy "cage" effect. Why print this? Light Play: When the…
My Froggit weather station includes the Froggit DP80 rain gauge. It came with a 32mm, 200mm long, mounting pole and brackets to screw to the rain gauge. This design has a ball that fits around the pole and a joint type stand to screw to a…
And the Ambient Control project needs something where the user can scream at and smash inputs to the code. A dashboard / control panel / User Interface. I had a few requirements : Fit inside the side of the IKEA LACK table. House 2…
Ich habe für den Wohnzimmertisch ein Ambientlight erstellt aus zwei Teilen. Für den unteren Teil habe ich Holz PLA von Geetech mit 10% Infill verwendet und für den Schirm oben PVB von Polylogic. Das Hinterher mit Isopropanol geglättet…
install with 10mm led strip print with rectilinear infill
I mounted this on an automation cabinet at my house to compliment my Samsung tablet I use for dashboards!
A wall-mounting bracket for the Ambient Weather Outdoor PM25 (PM2.5), which for some reason ships with screws but no mounting holes. The sensor simply slides in/out of the top for periodic recharging. The bracket uses the side lugs of the…
The best way to print them is at a 45 degree angle, with brim and 0.2mm nozzel. Best to make them out of Abs but if you are very crefull with them can also work with Petg. They should not need supports.
A case for an ambient light sensor using a Seeed XIAO RP2040 microcontroller and a generic BH1750 light sensor. The case has a sleek cubic design and is modular. The microcontroller mount for the XIAO is easy to replace and remodel, in…
This is a model for a spot ambient light with WLED. Prints completly without support. The following electronic parts are needed: WLED controller - https://github.com/Hasenpups/WLED_All-in-one_ESP32_Controller or something similar LED…
Rain gauges need something to prevent birds from perching like metal prongs around the top, but some designs are not always effective. A filter can help prevent their droppings and other small wind-blown debris from getting inside the…
This was designed specifically for the Segway GT1 / GT2. Print it and stick it to the under side of the scooter with some double sided tape and press in the lights. It will take some force to press in the lights as it is designed to be…
The displays from Ambient Weather have a keyhole mount, but those holes do not align with the 40mm IKEA SKADIS pegboards. This small adapter will accept two M3 screws and had hooks that neatly fit into the pegboard. This was designed for…
Print instructions: Lamp bottom part Layer height: 0.2mm Infill: 15% Material: PLA/PETG Print it laying on the upper side without any supports Lamp cover Print in Vase Mode! Layer height: 0,2mm Infill: 0% Perimeters: 1 Top solid layers: 0…
den Sockel unbedingt mit support drucken, das Lampenglas transparent. Für die Lampenfassung einfach eine Gu10 Lampenfassung im Baumarkt kaufen. Das Zwischenteil was hier nicht zum download bereit steht habe ich auf einer anderen Webseite…
Dezentes Licht für gemütliche Abende. Folgende Teile werden benötigt: 4x z_Eckverbinder 1x LED Stripe 10mm breite 1x LED Aluprofil (14x7mm) schwarz mit milchiger Streuscheibe 1x RGB Kabel 1x Transparente Zuleitung (3 oder 4 x0,14mm²) 1x…
This is a mode of UFO LED lamp with WLED installed on EPS32 It's important to print "Beam" and "LED deflector" with WHITE PLA in spiral vase mode with only one wall To built it you also need some M3 bolts and nuts, also a few hot inserts…
This is a desk/table mount for the monitor for Ambient Weather stations. It is designed to allow the monitor to sit upright on a flat surface confidently without fear of knocking it over, which happens using the inbuilt legs. Comes in…
Made an adaptor for flat top mounting an ambient weather station ws-2902 onto poles or 4x4 posts. Mounts with 1 long lag of about 7-8 inches, and 1 fender washer. Mount this to the top of the wood pole or post and then install the weather…
In order to block as much as possible ambient light from surrounding civilization I've designed this Ambient Light Protector for my Levenhuk Ra 150C Cassegrain telescope. It's push to fit design. Also the original cover fits well when you…
Ersatzträger für Cafehausstangen Durchmesser = 12 mm Maße: 30x12x19 [LxBxH] [mm]
Nice snoflake ambient lamp - you can put some lights inside and enjoy. You may try printong with minimal amount of infill and perimeters, as model can get quiet heavy when printed with prusa slicer default settings. I included both gcodes…
This is my ambient monitoring station box for my PRUSA MK4. The project is based on the Adafruit Feather ESP32 with BME sensor (P/N 5303) that will measure the outside ambient temperature, pressure and humidity. Inside the enclosure is…
For cloud cover measurements
3D Printed Parts: Lamp Body Lamp Base Pipe Fitting Bottom Cover Lamp Body: Make sure to scale the Lamp Body to 100x100: Lamp Body Model Additional Parts: Wemos D1 Mini (or other ESP8266 board) WS2812 LED Matrix 16x16 (Make sure it's 5V…
This is an enclosure for the Techtonics Elements model TEBM35C10 BMR drivers. https://www.parts-express.com/tectonic-tebm35c10-4-bmr-2-full-range-speaker-4-ohm--297-216 In this enclosure they can play down to about 200Hz, but I use them…
This ambient bedside lamp pairs a fluted hourglass shade with a tactile, textured base, combining clean Japandi and mid-century lines. The vertical ribs along the curved shade diffuse light into a soft, even glow across the surface.…
The case prints best at 0.16 with defaults settings in Prusa Slicer due to the thin grille around the sensor.
This 3D-printable enclosure is designed for the ESP8266 D1 Mini LED candle controller project. It provides a compact and stable housing for the custom PCB, with dedicated openings for the Micro-USB connector and enamelled copper wire…
Nice black ambient lamp led 250 lumen warm with socket G9 220/230 volt i used brass insert nuts & screws M2,5 *8
This project provides a 3D-printable mount designed to illuminate your computer keyboard using LED strips. The mount easily attaches to the underside of your desk, positioning the LED strip to provide comfortable and functional ambient…
This is a simple lightbar with tilt regulation that goes on the back of the monitor to light up the wall behind it. The 2 rods (part a and part b) are connected with a 20mm m3 bolt and a hex nut. The LED strip is mounted with double sided…
I wanted to mount my weather station to my HSW. I found @aiannazzone 's model, where they had already done most of the work. I stripped off the SKADIS clips and added pegs. Works exactly as I wanted! I maintained the flat-side of the…
This free version is compatible with standard LED strip lights, making it simple to assemble and use. The cylindrical lamp, measuring 217 mm (L) × 106 mm (H), produces a soft ambient glow, perfect as a night light, mood light, or…
If you’re looking to add a splash of color to your desk or create a cozy atmosphere in your room, building a smart LED lamp is one of the most rewarding entry-level electronics projects. In this post, I’ll walk you through how I built a…
This is a protective housing for the Ambient Weather WH31P Water Proof Probe Temperature Sensor. I have a metal building that wouldn't allow me to place my sensor inside so I created this to hang on the door sill outside and sense the…
I bought a rather pricey Japanese wall set in Bauhaus only to discover the rail (Expo Ambiente Smart Set) has to be mounted with a couple special plastic snap-mounts (either to the ceiling or to an wall-mounted L profile), both ending up…
Growla — Ambient Fold Lamp Growla is a compact 3D-printable ambient lamp designed to bring soft, cozy light to your desk or living space. Designed specifically for the RGBW KC007 light module:…
Discover the compact, multi-sensor breakout board, perfect for your next innovative project in wearables, IoT, and more! Check the full project on PCBway:…
Support for the compressor's ambient humidity filter. Print preferably in PETG or ABS. Although PLA can work perfectly
This is a bit of a tricky print, I wasn't able to get a clean finish on the top of the sphere using my MK4S, so I decided to just have a hole in it since I was putting it in the corner anyways. I've included files to print this in vase…
Summary LumaBloom is a 3D printable enclosure for a DIY ambient light sensor device that automatically adjusts monitor brightness based on surrounding light. The device is designed as a decorative flower: the sensor is placed in the…
Bring warm, cozy ambient lightinto your home with this modern ribbed wall lamp shade. I printed it with only 191 grams of white PLA. You need an E27 socket and of course the e27 light bulb The installation is very simple. You have three…
🌟 DIY Ambient Lamp. Seasonal Design (Christmas & Summer) Bring cozy light and smart functionality to your home with this DIY ambient lamp featuring interchangeable seasonal lids! This design includes: ❄ Winter Lid – decorated with a…
*** Note: this printer has not been fully tested since I do not know the proper Arduino Uno and CNC Motor Shield firmware updates I need to operate the four (4) independent axes simultaneously. There are three (3) axes of motion for the…
The LG UltraFine 5K Monitor incorporates an embedded ambient light sensor for automatic brightness adjustment. However, when illumination originates from behind the display, the sensor fails to register it, resulting in insufficient…
Non-printed parts needed: LED profile in your desired length, the cheap, very basic one like this is fine with a total width of about 17mm Ebay.de AliExpress 8mm OD / 6mm ID Aluminium tubing in your desired length, should be available at…
Wall mount for the Ambient Weather Receiver, it tilts the unit up at about a 30 degree angle. Printed with QiDi ABS-Odorless Blue, 15% Gyroid in-fill @ 50% print speed.
Ambient light switch housing. Sensor : https://share.temu.com/Ja6Y6HETMRB
Featuring a raised interior drainage grid and a recessed channel for a diffusable light strip, this tray casts a low-profile glow upwards around the base of small planters. The rounded rectangular rim holds the LED strip flush to softly…
✨ Ambient Lamp — Asanoha Tall Tri Spire Shade A modern 3D printable parametric ambient table lamp featuring an organic woven spiral cone geometry that produces a soothing, warm lithophane glow. Designed & Curated by cceluizx 🌟 Key Design…
Raspberry Pi based automated audio player. Use it in any room where you want to create an ambiance! I use this device plays ambiant sounds, such as forest, rain or wind recordings. The audio is started as soon as movement is detected, and…
# Mini Oil Barrel LED Tealight – Industrial Style Ambient Light Bring a touch of industrial style and warm ambient lighting to your home, workshop, office, hobby room, or man cave with these small 3D-printed oil barrel LED tealight…
✨ Ambient Lamp — Woven Basket Twist Cone Lamp Shade A modern 3D printable parametric ambient table lamp featuring an organic woven spiral cone geometry that produces a soothing, warm lithophane glow. 🌟 Key Design Features 100%…
✨ Ambient Lamp — Wave Texture Square Shade A modern 3D printable parametric ambient table lamp featuring an organic woven spiral cone geometry that produces a soothing, warm lithophane glow. Designed & Curated by cceluizx 🌟 Key Design…
✨ Ambient Lamp — Square Swirl Lidded Facet Shade A modern 3D printable parametric ambient table lamp featuring an organic woven spiral cone geometry that produces a soothing, warm lithophane glow. Designed & Curated by cceluizx 🌟 Key…
✨ Ambient Lamp — Dual Wall Pendant Leaf Grid Cube Double Layer Pierced Shade A modern 3D printable parametric ambient table lamp featuring an organic woven spiral cone geometry that produces a soothing, warm lithophane glow. Designed &…
I designed this ambient light to illuminate a shelf/cabinet used for displaying model cars. The design consists of 3D printable parts that can be assembled to create a clean and simple lighting system for display shelves. It is suitable…
✨ Ambient Lamp — Slate Wall Lidded Taper Shade A modern 3D printable parametric ambient table lamp featuring an organic woven spiral cone geometry that produces a soothing, warm lithophane glow. Designed & Curated by cceluizx 🌟 Key Design…
✨ Ambient Lamp — Hexagonal Bulging Faceted Lidded Shade with Crackle Texture A modern 3D printable parametric ambient table lamp featuring an organic woven spiral cone geometry that produces a soothing, warm lithophane glow. Designed &…
A stylish stand for an Ambient Weather WH31 temperature/humidity sensor. I think the thermometer is the same as the Ecowitt WH31. (I believe Ecowitt makes the Ambient Weather product.) Printed on a Prusa Mini+, 0.2mm layer height, 2…
Ambient light switch housing. Sensor : https://share.temu.com/Ja6Y6HETMRB
Growla — Ambient Fold Lamp Growla is a compact 3D-printable ambient lamp designed to bring soft, cozy light to your desk or living space. Designed specifically for the RGBW KC007 light module:…
This is a bit of a tricky print, I wasn't able to get a clean finish on the top of the sphere using my MK4S, so I decided to just have a hole in it since I was putting it in the corner anyways. I've included files to print this in vase…
If you’re looking to add a splash of color to your desk or create a cozy atmosphere in your room, building a smart LED lamp is one of the most rewarding entry-level electronics projects. In this post, I’ll walk you through how I built a…
Raspberry Pi based automated audio player. Use it in any room where you want to create an ambiance! I use this device plays ambiant sounds, such as forest, rain or wind recordings. The audio is started as soon as movement is detected, and…
The best way to print them is at a 45 degree angle, with brim and 0.2mm nozzel. Best to make them out of Abs but if you are very crefull with them can also work with Petg. They should not need supports.
KEY FEATURES A modular 4-in-1 LED lighting system designed for easy 3D printing and clean, modern lighting. This cylindrical lamp with 217 mm (L) × 106 mm (H) creates a soft ambient glow, making it ideal as a night light, mood light, or…
Pendulum is a compact table lamp built around a clean dome shade, a deep green base, and a gold silk accent that swings over the top like a suspended frame. The shape is simple, but that curved ring changes the whole silhouette and gives…
It's another lamp! This lamp utilizes this light cord to function. Simply watch this video for assembly instructions. Print Instructions: Layer height: 0.2mm Supports: Lamp - Yes Everything else - No Thank you for your time and…
Ambientador desmontable para colocar lo que desees y colgarlo en el armario. La tapa superior le puedes modificar el relleno con Prusaslicer. Filamento: PLA Resolucion: 0,2 No necesita soportes