Wyniki wyszukiwania: amc

Sortowanie

457 modeli

P
PrintablesCojoj

Xiaomi Mi Computer Monitor Light Bar mount for Logitech Streamcam

This is my attempt to marry Xiaomi Mi Computer Monitor Light Bar and Logitech Streamcam . I'm pleased with both products, but I was so mad that there was no solution to use them together without any stupid workarounds. When I started…

Wydruk około 1,90 €–2,32 € nettoWstępna wycena jednego wariantu

Pobrania
358
Polubienia
45
Ocena
4
P
PrintablesTm

Privacy Cover for Logitech StreamCam

A simple loose-fitting privacy cover for the Logitech StreamCam webcam. Print settings Material: PETG Layer height: 0.20 mm No supports needed. Seam position: Rear Perimeters: 2 Layer override: 3 perimeters on the topmost layer so no…

Wydruk około 0,79 €–0,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
156
Polubienia
10
Ocena
5
P
PrintablesSweet1227

Elgato Prompter - Logi Streamcam Adaptor

UPDATE: see the corrected version by @Bingohecht_223494 https://www.printables.com/model/1044021-elgato-prompter-logitech-streamcam-adaptor-fixed The Elgato Prompter comes with a lot of adaptors and flexibility, but I wanted a cleaner…

Wydruk około 1,43 €–1,74 € nettoWstępna wycena jednego wariantu

Pobrania
60
Polubienia
5
Ocena
0
P
Printablesiceshark

SteamDeck Frankendock - SteamClip Anker A8352 Modular Dock REMIX

I Remixed the Steamclip - Steamdeck Attachment System - VESA Attachment by Mike Brumm to create a dock where I could attach my battery my steam deck and my Anker A8352 hub. I borrowed pieces from different sources to create this dock that…

Wydruk około 18,83 €–23,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
10
Polubienia
4
Ocena
0
P
PrintablesTom Vít

Logitech StreamCam Privacy Cover V2 (NEW)

Easy to 3D print security cover for enhanced privacy with your handy Logitech StreamCam C980. No glue, just click the cover into the frame hinge and mount it on the camera. Easy to open, easy to stay close. Printed in cca 30–40 minutes…

Pobrania
3450
Polubienia
163
Ocena
4,73

Dreamcatcher

Dreamcatcher

Pobrania
1280
Polubienia
383
Ocena
5
P
PrintablesRetro Frog

Dreamcast Vertical Stand

To save more space, I designed this vertical stand for the Dreamcast. While ideally suited for DCs that are equipped with optical disc emulators, it will also work with ones that still have their gdrom installed. I recommend printing this…

Pobrania
1016
Polubienia
121
Ocena
5
P
PrintablesBeamCase_Design

BeamCase SW - LOOP case panels

These are the LOOP style case panels for BeamCase sandwich and BeamCase SFF. Instead of multiple panels that are printed in a flat orientation, these are loops that are printed standing up, and come with two different vent patterns, slots…

Pobrania
912
Polubienia
502
Ocena
5
P
PrintablesCollingall

Dreamcast Noctua Fan Mod

These are the parts that are required to mount a Noctua NF-A4x10 5v inside of your Dreamcast. This mod only works in models VA1 and VA2 systems. There are two versions of the latch, the regular one is designed for the original Sega system…

Pobrania
902
Polubienia
80
Ocena
5
P
PrintablesBeamCase_Design

BeamCase ITX - Panels v3.2

These are case panels v3.2 to cover up your BeamCase and give it a unique look. The handles make it easy to carry and also act as feet and bumpers, though alternative case feet are avaliable. These are only the files for the outer panels,…

Pobrania
754
Polubienia
398
Ocena
5
P
Printablespcwzrd13

Sega Dreamcast VMU Cap v2.0

A much-improved version of my original VMU cap replacement that's about 95% accurate to the official Sega cap. I meticulously measured every little detail to make sure it fits perfectly, and it does! Visually it's not a 1:1 copy but it…

Pobrania
693
Polubienia
81
Ocena
4,75
P
PrintablesRetro Frog

Dreamcast Controller Cable Clip

The Sega Dreamcast is a great console with a controller that had some odd design choices made for it. The most confusing is the controller cable that exits the back of the controller and then attaches to a clip built into the bottom of…

Pobrania
689
Polubienia
96
Ocena
5
P
PrintablesBeamCase_Design

BeamCase - Nut Positioner

This nut positioner keeps flat square nuts (DIN 562) in their position, so they do not slide around in the Makerbeam XL profile. When adding brackets and other parts to your BeamCase, (or other projects using Makerbeam XL profiles)…

Pobrania
675
Polubienia
101
Ocena
5
P
PrintablesDolmaster

Logitech StreamCam Cover

Flip cover forLogitech StreamCam. The shaft between the cover and the cap uses a 1.75 piece of filament Print instructions Flip cover forLogitech StreamCam. The shaft between the cover and the cap uses a 1.75 piece of filament

Pobrania
672
Polubienia
52
Ocena
4,93
P
Printablesasjolund

Logitech StreamCam Cover

A two piece lens cover for the Logitech StreamCam. Use any bit of filament, 1.75 mm, as a pin for the hinge. Can be printed without support

Pobrania
670
Polubienia
62
Ocena
4,92
P
PrintablesBlack_Wolfie

Bungee/shock cord clamcleat

This is a remix of an old injection moulded model I found. I printed in ABS for strength and environmental resilience, but would probably work with PLA, PETG, etc… The bungee/shock cord goes through the hole at the back and is pushed down…

Pobrania
538
Polubienia
103
Ocena
5
P
PrintablesOldKingHamlet

Geometric Dreamcatcher (With print in place feathers. Amazing with glow in the dark filament!)

v2 is now available with better, more printable hinges! If your printer cooling or overhang performance is average, please print with .1mm or .15mm layers Dreamcatchers are Native American charms that originated in the Ojibwe culture,…

Pobrania
522
Polubienia
113
Ocena
5
P
Printables3DPrintBunny

String Dreamcatcher

A Dreamcatcher using single extrusions of filament as strings to create the web. Print at 0.2mm layer height.

Pobrania
498
Polubienia
148
Ocena
4,83
P
Printablesrav

NEW Dreamcatcher Christmas Tree Rotating Ornament 2025 edition

Notice - make sure to use Arachne wall generator or enable printing thin walls setting in your slicer, as some elements of the model hang on very thin lines. Check out other Christmas models:

Pobrania
476
Polubienia
131
Ocena
5
P
PrintablesNeoz3d

Logitech Streamcam Tripod Mount with Joint

Streamcam holder for tripod with joint. You need a threaded insert M3 (Ruthex) and a screw M3x18. The hole below is a core hole for 1/4 inch tripod thread. If necessary, I also have a lower part for the Ikea "Antifoni" lamp. Dismantle the…

Pobrania
472
Polubienia
27
Ocena
4
P
Printablespcwzrd13

Dreamcast USB Adapter Enclosure (USB4MAPLE by megavolt85)

A custom-designed enclosure for megavolt85's USB4MAPLE USB adapter for the Sega Dreamcast. You can find more info here . This build uses a Raspberry Pi RP2040 Zero and the controller connector from an extension cable. I used this…

Pobrania
455
Polubienia
46
Ocena
5
P
Printables3DPremiun

Yamcha Dragon Ball Z #3 Optimized for 3D Printing

—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…

Pobrania
403
Polubienia
41
Ocena
0
P
PrintablesJace1969

Javelin AMC - AMX 71 - 74

Hi Barry this really gets a big thanks to Veículos Militares over at the 3DWarehouse for releasing this model, I've had my first real attempt at trying to save a model of this type to a possible printable .STL file Now it is highly…

Pobrania
400
Polubienia
35
Ocena
4
P
PrintablesVladTheInhaler

WhamCaster- Mini Clone Hero/ Guitar Hero controller with whammy

This Model is only the body! It is designed to be used with the ModCaster Guitar Neck. Files and build instructions for components of the ModCaster System are available on my Printables Page! At this time, some parts from…

Pobrania
389
Polubienia
78
Ocena
4,67
P
PrintablesShabubu

Sega Dreamcast Controller Wall Mount

Wall mountable Sega Dreamcast controller holder. This is designed for Picture Hanging Command Strips (ex: https://www.amazon.com/Command-Picture-Hanging-Christmas-Decorations/dp/B0B4F5PXW1 ) This probably could have been split into…

Pobrania
358
Polubienia
70
Ocena
5
P
PrintablesBeamCase_Design

Beamcase - external radiator and fan bracket V2 (50 versions)

This bracket is designed to add radiators and fans on top or below your BeamCase in a strong and good looking way. It is available in 50 different versions depending on your setup. These brackets are designed to work together with the…

Pobrania
356
Polubienia
82
Ocena
5
P
PrintablesJeff Chen

Sega Dreamcast VMU AAA Battery Pack

The Sega Dreamcast VMU has a battery life problem. It eats CR2032s for breakfast. Changing the batteries involves using a screw driver. It's a hassle to maintain. Features This project adds a battery pack to the VMU that allows you to…

Pobrania
352
Polubienia
95
Ocena
4,5
P
PrintablesBeamCase_Design

BeamCase - X-Braces

These are braces to stiffen the frame of your BeamCase frame, or any other frame utilizing 15x15mm aluminium profiles (and m3 screws). The X-braces are made to stiffen your BeamCase frame. They are designed to work with Makerbeam XL…

Pobrania
342
Polubienia
47
Ocena
5
P
PrintablesJobPrinter

Very Slim Webcamcover for ALL

I got a webcam cover and it was way to thick, when I closed my laptop it would bend the screen. So I designed my own. I wanted tot make it really, really thin but still strong and good quality. Hope you like it as much as I do. I used…

Pobrania
335
Polubienia
36
Ocena
5
P
PrintablesMike Brumm

Steamclip - Steamdeck Attachment System - Battery Bank Attachment

This is a battery attachment for the Steamclip. It is designed for a Baseus 20000 mah unit. This uses a 0.5x5x15mm spring. I will be uploading more models, but please check out my Etsy page MyRandomHobbies for more attachments.

Pobrania
328
Polubienia
49
Ocena
5
P
PrintablesMike Brumm

Steamclip - Steamdeck Attachment System - Main Body V2

This is the main body for my Steamdeck Clip system "Steamclip" V2 includes a kickstand and SD card storage. You'll need a 1mm metal rod for the kickstand and sd card storage. I used a 1mmx100mm steel rod and cut it to length. I'd also…

Pobrania
323
Polubienia
45
Ocena
0
P
Printableszinitri

Moon and rose dreamcatcher

Moon and rose dreamcatcher wallart

Pobrania
318
Polubienia
78
Ocena
0
P
PrintablesBeamCase_Design

BeamCase - Cable Bracket 1

This is a cable holder and zip tie point for the BeamCase system or other 15x15mm profiles using m3 nuts. With it you can secure cables in place and it helps cable management. These brackets are designed to work together with the modular…

Pobrania
305
Polubienia
48
Ocena
5
P
PrintablesBeamCase_Design

BeamCase - one sided fan bracket (multiple sizes)

This fan bracket is made to add fans to your BeamCase. It comes in different sizes for 120mm, 140mm and 92mm fans of different thicknesses. The bracket is secured to the fan with standard fan screws and then screwed to the frame from the…

Pobrania
304
Polubienia
35
Ocena
5
P
PrintablesBeamCase_Design

BeamCase - corner Braces

These are corner braces to stiffen the frame of your BeamCase frame, or any other frame utilizing 15x15mm aluminium profiles (and m3 screws). The corner braces are made to stiffen aluminium frames and fit all BeamCase versions (SFF and…

Pobrania
302
Polubienia
72
Ocena
5
P
PrintablesHunter Rand

Amcrest Wall Mount Bracket for Dome Cameras

The is a wall mount bracket designed to serve in place of the Amcrest AMCPFB203W, tested with Amcrest IP5M-T1179EB-28MM (the model of camera I have). The cavity inside is large enough to fit the ethernet connector and the camera's…

Pobrania
293
Polubienia
23
Ocena
5
P
Printablespcwzrd13

CD Rack for Thick Japanese Jewel Cases (Dreamcast)

If you like the design, please consider tipping on Ko-fi . Thank you! :-)

Pobrania
287
Polubienia
35
Ocena
0
P
Printablesscross01

Logitech Streamcam Mount with Joint (Remix)

Remix of the Logitech Streamcam Tripod Mount with Joint by Neoz3d Rebuilt from scratch in Autodesk Fusion 360 based on Neoz3d's design. Model is fully 3D printed. Replaced the need for an M3 nut and bolt with a printed thread and nuts…

Pobrania
259
Polubienia
32
Ocena
4,25
P
Printablespcwzrd13

Sega Dreamcast GD-ROM Drive Lid

Want a great way to customize your Dreamcast without needing to mess with spray paint? Why not 3D-print yourself a custom lid! The lid itself, Dreamcast logo badge, and triangle piece are all separately printable so you can use any number…

Pobrania
255
Polubienia
47
Ocena
0
P
PrintablesBeamCase_Design

BeamCase - simple fan bracket (multiple sizes)

This fan bracket is made to add fans to your BeamCase (SFF). It comes in different sizes depending on the fan thickness and mounting position. The bracket is secured to the fan with standard fan screws and then it simply screwed to nuts…

Pobrania
255
Polubienia
31
Ocena
0
P
Printablespcwzrd13

Sega Dreamcast VMU Stand

A stand for displaying your Dreamcast VMUs. The VMU snaps into place by utilizing the wrist strap connector at the bottom of the unit so it won't move around or accidently fall over. The triangle emblem piece can be printed separately so…

Pobrania
241
Polubienia
51
Ocena
5
P
PrintableswilliamCromar

Model of Marcel Duchamp's Fountain by williamCromar

This model is one of the collection Prêt à Faire: Printable Readymade Models. Prêt à Faire is an autonomous artistic project, scholarly reference work, and institutional critique by williamCromar , supported by a faculty grant from Penn…

Pobrania
237
Polubienia
21
Ocena
5
P
PrintablesMike Brumm

ROG Ally - Steamclip

Steamclip for the ROG ally. This will allow you to use all of the Steamclip attachments on the Ally. There are openings in the back for airflow. You'll need a 1mm x 70mm steel rod for the stand and SD card holder. PRINT VERTICALLY!

Pobrania
236
Polubienia
35
Ocena
0
P

SEGA Dreamcast Trigger - pin fix

I had the pins on the right Trigger broken off, and made a small model to fix this issue. Was printed on a Resin printer, and glued into place. This allows the tabs themselves to still flex a little bit, so you can insert it from the top…

Pobrania
232
Polubienia
28
Ocena
0
P
PrintablesNehBleh

Terraonion MODE Sega Dreamcast Mount

This is a plate for mounting the Terraonion MODE to a Sega Dreamcast. It uses the three existing disc drive screws to mount the plate to the Dreamcast. Four additional screws are needed to attach the MODE itself to the mount. The MODE…

Pobrania
224
Polubienia
18
Ocena
0
P
PrintablesBeamCase_Design

BeamCase - simple 16mm button bracket

This is a bracket to mount a 16mm button to your BeamCase frame (or other 15x15mm aluminium profiles) These brackets are designed to work together with the modular BeamCase ITX case which can be found here . Required Hardware Screws:…

Pobrania
219
Polubienia
33
Ocena
0
P
PrintablesBeamCase_Design

BeamCase - slot in fan bracket

This fan bracket is made to add fans to your BeamCase. It comes in different sizes for 120mm and 140mm fans. The bracket is secured to the fan with standard fan screws and then it slots into the frame on one side and is screwed to the…

Pobrania
216
Polubienia
24
Ocena
5
P
PrintablesJonas Pedrotti

Logitech StreamCam Infill Cover

This remix has an obvious and a few less apparent design changes. The most obvious change is that i opened up most of the cover area by removing the top an bottom layers and thus revealing the infill. (I needed to do some geometry…

Pobrania
215
Polubienia
43
Ocena
4,88
P

Sega ring (Dreamcast)

- The one ring that should have been them all- Design Goal Designed a ring for the Prusa Printers flash contest. My goal was to make something nerdy yet simple/elegant, at which I think I succeeded! Printing & size The inner diameter (ID)…

Pobrania
215
Polubienia
36
Ocena
0
P
PrintablesD4N137

Dreamcast GDEmu Mounting Bracket VA0

Gdemu 5.20 mounting bracket for VA0 Mainboard

Pobrania
214
Polubienia
13
Ocena
0
P
PrintablesHanarius

Dreamcast USB-C PD

This is an Dreamcast USB-C PD mount. You'll need an pico PSU from e.g. RexusNexus in addition to that an USB-C PD trigger.

Pobrania
209
Polubienia
24
Ocena
0
P
PrintablesBeamCase_Design

BeamCase - Angled Handle with optional NATO rail

These are angled external handles that fit all BeamCase variants that use the simple chamfered case panels (the default ones). These handles are very sturdy, and also act as bumpers for the case to protect it. There are two versions of…

Pobrania
204
Polubienia
103
Ocena
0
P
PrintablesCollingall

Dreamcast Case Emblem

Simple and fast print of a Dreamcast case emblem that makes it more 3D. I used a 0.25mm nozzle for my print to get cleaner text. Category: Video Games

Pobrania
199
Polubienia
17
Ocena
0
P
Printablesschoenwaldnils

Logitech StreamCam Lens Cover

Logitech StreamCam Lens Cover with an in-place hinge. It can be folded back completely. I printed with a layer height of 0.1mm and the hinge works perfectly

Pobrania
196
Polubienia
27
Ocena
5
P
PrintablesRetro Frog

Dreamcast VMU lock bracket

This simple bracket allows you to lock your VMU into the Dreamcast controller and make it extremely difficult to remove. Useful for Kiosk applications or trade shows and conventions. Only works with original Dreamcast controllers and…

Pobrania
193
Polubienia
36
Ocena
5
P
PrintablesBeamCase_Design

BeamCase - foldable legs

Description These foldable legs give your BeamCase plenty of breathing room when in use, but can be folded up for transport. Extended they give 40mm of breathing room, and when folded they only add 11 in height. They fit all BeamCase…

Pobrania
193
Polubienia
38
Ocena
5
P
PrintablesOddLion

"Dreamcaster" Guitar Body

Inspired by Tom DeLonge from blink 182 and my own personal style preferences, this guitar body is a custom design that I made based on the outline of a Fender Starcaster. I made this in to a real working guitar! I cut this model in to 7…

Pobrania
191
Polubienia
33
Ocena
0
P
PrintablesTadda21

Sega Dreamcast console display stand / holder / dock

I wanted to showcase my DC console but the angles on my shelves are a little weird, so I came up with this model. It raises the console off the surface by a few centimeters and displays it at a roughly 15 degree angle.

Pobrania
189
Polubienia
30
Ocena
0
P
Printablesschoenwaldnils

Logitech StreamCam GoPro Mount

Logitech StreamCam GoPro Mount Snap in place. Tight fit. Not for bike mounts or similar ^^' The lens cover in the pictures is this one: https://www.printables.com/de/model/283582-logitech-streamcam-lens-cover

Pobrania
187
Polubienia
23
Ocena
4,75
P
Printablesedmar

logitech streamcam support 3d print

Logitech streamcam support - 3d print One for the universal Nut (1/4"). Other for direct attach to the cheap tripod.

Pobrania
185
Polubienia
14
Ocena
0
P
PrintablesBeamCase_Design

BeamCase - slide in fan bracket

These are the slide in fan brackets for the BeamCase system. These brackets slide into the aluminium profiles and instead of being screwed to nuts in the profiles which makes them simpler than the other options, but they need to be added…

Pobrania
184
Polubienia
50
Ocena
5
P
PrintablesBeamCase_Design

BeamCase SW - V3.0 additional panel sizes

These are longer panels for BeamCase Sandwich V3.0 with 15x15 Aluminium profiles that are between 300mm and 360mm long. The panels come with and without integrated handle, as well as version that are split along the length or one piece…

Pobrania
182
Polubienia
38
Ocena
5
P
Printablespcwzrd13

Sega Dreamcast VMU Battery Cover

Ladies and gentlemen, I present to you the Sega Dreamcast VMU battery cover! Painstakingly re-created from scratch down to (almost) every minute detail! From the pointless little circles to the battery tab slot to the ever-so-slight angle…

Pobrania
175
Polubienia
18
Ocena
0
P
Printableschaosmatic

Steamcrave replacement battery door insulator

After I dropped my titan the first time I tried to look for a replacement battery door but you need to buy the entire mod again, which I did the first time. Then came 3D printing in my life. Fun as hell! But of course, my precious new mod…

Pobrania
172
Polubienia
2
Ocena
5
P
PrintablesChris Ne

Tripod (telescopic) with Universal Mount (1/4" screw or Gopro-mount) for digital cameras / camcorder / light DSLR

English below. Hier ist ein Remix der auf 80% gescaled vom Orignal ist, um Gewicht und Platz zu sparen. Dieses Stativ ist ideal für reisen mit kleiner Fotoausrüstung ohne auf etwas zu verzichten! Hoch oder Querformat sind problemlos mit…

Pobrania
171
Polubienia
44
Ocena
0
P
PrintablesSNASA

BeamCase SFF HDD Bracket

These are HDD brackets designed for BeamCase SFF case allowing to mount 5 HDD, perfect for a NAS build. Miscellaneous: 16 * M3x8 countersunk screws 8 * M3 nut 8 * M3 square nut 20 * HDD screws and rubber grommets I used this kind from…

Pobrania
169
Polubienia
93
Ocena
5
P
PrintablesRetro Frog

Terraonion MODE Hard drive retention bracket for Saturn and Dreamcast

This is a snap down retention bracket for hard drives and SSDs in MODE. Normally a SATA drive is secured down to MODE with 2 screws through the bottom. However that means you need to remove MODE from the console to get to the bottom of…

Pobrania
164
Polubienia
10
Ocena
0
P
PrintablesPeter Farell

Garth's 1976 AMC Pacer

Garth's 1976 AMC Pacer from Wayne's World. according to my son this is “Mid” Scaramouche, Scaramouche, can you do the Fandango?" From redit I read that Scaramouche was a clown figure in the operatic world and the fandango is either a…

Pobrania
162
Polubienia
48
Ocena
0
P
PrintablesMIPI3D

Dreamcatcher Collection - Capture Dreams in Style!

🌌🦉🦔🦋 Dreamcatcher Collection - Capture Dreams in Style! Key Features: 🪞 Base Plate Design: Each dreamcatcher features a beautifully crafted base plate that serves as the foundation for capturing dreams. 🌟 Ornamental Themes: Space: Embark…

Pobrania
162
Polubienia
63
Ocena
0
P
PrintablesBeamCase_Design

BeamCase - simple handle

This handle for the BeamCase system can be mounted anywhere along the Makerbeam XL profiles or between them. They can also be utilized as feet. This handle can be used with a bare frame, or with outer panels, there are two separate…

Pobrania
161
Polubienia
32
Ocena
5
P
PrintablesBubble

Logitech Streamcam bipod

Logitech Streamcam bipod Use the original streamcam laptop mount as a desktop bipod ^^ Pass the mount through the shirt and slide the legs. Cam can tilt and pan, as if it was a neck. No screws, no magnet, slide in place.

Pobrania
160
Polubienia
35
Ocena
5
P
Printablesrobot_retro

Dreamcast USBC 3D Printed Spacer

3D printed spacer to be used with the Robot_Retro Dreamcast power supply. robot_retro store Designed by Joseph Tomkins

Pobrania
158
Polubienia
26
Ocena
5
P
Printablesguufm

FAMCÜTE Chef Knife Sheath

Printed in two parts and glued together. The other half is the same part mirrored.

Pobrania
155
Polubienia
16
Ocena
5
P
Printables3DPrintBunny

Dreamcatcher shelf ornament

Dreamcatcher ornament @3DPrintBunny

Pobrania
152
Polubienia
55
Ocena
5
P
PrintablesBeamCase_Design

BeamCase V5.5 - more panel sizes

These are additional case panel sizes for BeamCase SFF and (m)ATX v5.5. The files include panels that are printed as one piece and ones that are split along the length, in a range of size options. Components structure and naming: Each…

Pobrania
151
Polubienia
10
Ocena
0
P
Printablesfidoriel

ATX PSU Bracket for BeamCase

Make sure you have a thin non-regular mainbaord.

Pobrania
151
Polubienia
24
Ocena
5
P
PrintablesNeoz3d

Cover for Logitech Streamcam

Slide onto the camera from above. With Logo or without All parts have been drawn by myself. Similarities to other parts by other designers are not intentional and or coincidental. Maybe I was inspired by other designs. If this happened, I…

Pobrania
148
Polubienia
10
Ocena
5
P
PrintablesBiomech

Spider Web Dreamcatcher

Dreamcatcher body shaped like a spider web. It may be used in other ways too. Diameter is 150mm but you can scale it up or down in slicer to fit you needs.

Pobrania
147
Polubienia
13
Ocena
5
P
PrintablesNiSE

9mm JamCap (Malfunction Practice Snap Cap)

I saw a double feed practice round while looking for a snap cap model and really liked the concept but the execution just wasn't there so I made my own. These will fit in-between standard rounds or other snap caps but not consecutively. I…

Pobrania
141
Polubienia
18
Ocena
5
P
Printableschappyman66

AMC Gremlin Shell

I used gauderio's excellent model and made a 1/32 scale slot car shell. Edit: 28 Nov 2021 - Made some modifications. Added a splitter and air dam, some louvers, and cleaned up the file generally. Removed the mirrors, antenna, and roof…

Pobrania
141
Polubienia
10
Ocena
0
P
PrintablesJulien Mairy

Mohandas Karamchand Gandhi – Bust

Mohandas Karamchand Gandhi – Buste 🇫🇷 Description (Français) Ce buste représente Mohandas Karamchand Gandhi , figure majeure du XXᵉ siècle et symbole universel de la résistance non violente. Il est inspiré de la photographie la plus…

Pobrania
138
Polubienia
9
Ocena
5
P
PrintablesBeamCase_Design

BeamCase - simple radiator bracket

This bracket is made to add radiators to your BeamCase (SFF). It comes in different sizes depending on the radiator and fan thickness and mounting position. The bracket is secured to the radiator with standard screws and then it simply…

Pobrania
138
Polubienia
21
Ocena
0
P
PrintablesPlatin117

SteamCam Z-Axis mount for Ender 3 S1 (Pro)

A Z-axis mount for the Logitech SteamCam to attach it to the Ender 3 S1 or Ender 3 S1 Pro. You can use the screw from GreatOldOne . https://www.thingiverse.com/thing:3160367/files Update: The camera occasionally made contact with the…

Pobrania
136
Polubienia
21
Ocena
4,5
P
PrintablesBeamCase_Design

BeamCase - side radiator bracket V1

This bracket is made to add radiators to your BeamCase, there are versions for BeamCase SFF, m(ATX) and Sandwich. It is a simple bracket, that offers a lot of flexibility as the radiator can be moved up or down and forward and back. It…

Pobrania
133
Polubienia
38
Ocena
0
P
Printablespcwzrd13

Sega Dreamcast VMU Holder v3.0

A new VMU holder design for 2024 has arrived! This one ditches the simple square design of the last one and adopts design elements from the Dreamcast case and VMU to make what could almost pass as an official Dreamcast accessory!…

Pobrania
129
Polubienia
23
Ocena
5
P
PrintablesCollingall

Sega Dreamcast VMU Display Stand

I have been working on display stands for various controllers and decided to do one for my VMU I printed 0.2mm layers at 15% infill, no supports are required. Category: Video Games

Pobrania
124
Polubienia
22
Ocena
5
P
PrintablesTBone

Dreamcast VMU AAA Battery Pack Remix

Slight tweak of Jeff Chen's excellent Dreamcast VMU AAA Battery Pack. The bottom of each half was flattened and widened to allow for vertical printing. Supports are still necessary, but fewer are required and they will be easier to…

Pobrania
123
Polubienia
20
Ocena
5
P
Printablespcwzrd13

Sega Dreamcast VMU Holder v2.0

The best way to store and display up to 10 Dreamcast VMUs or memory cards! Completely redesigned from the ground up, my new VMU holder has slots with a snugger fit, snazzy rounded corners, and a new customizable design for the front. Two…

Pobrania
122
Polubienia
34
Ocena
5
P
PrintablesLudo

Alternative Eject mechanism for Dreamcast Noctua Fan Mod

Just an alternative mechanism that will print in one past with resin printer. More details: https://www.printables.com/model/141672-dreamcast-noctua-fan-mod

Pobrania
122
Polubienia
9
Ocena
0
P
PrintablesDouglas Hale

Amcrest dome camera wall mount

Should work with many variations of amcrest cameras and maybe some from other vendors. My camera is an Amcrest IP5M-T1179EW-28MM.…

Pobrania
118
Polubienia
14
Ocena
0
P
PrintablesTyler Nielsen

Death Stranding Dreamcatcher

A model of Sam Porter Bridges' dreamcatcher from the video game Death Stranding.

Pobrania
117
Polubienia
17
Ocena
0

SEGA Dreamcast arcade stick HKT-7300 wall mount V2

EDIT 01/11/24: V2 version is here. Few changes compared to V1: reduced weight/dimensions by roughly 50% (V1 weighted at 72.7grs, V2 at 37.2grs with 15% infill) larger access holes (10mm) to more easily access the screws holes increased…

Pobrania
115
Polubienia
16
Ocena
0
P
PrintablesKirill S

Dreamcast GDEMU Mount w/SD Extender

This is modular Dreamcast GDEMU (optical drive emulator) mounting system. It's designed to fit several criteria: Rigidity and sturdiness; Restoration of original airflow; Simple to print (minimal support and overhang); Compatibility with…

Pobrania
114
Polubienia
26
Ocena
5
P
PrintablesGrahame Falvey

Steamclip - Viture Pro Mobile Dock Attachment

I was unable to find the Viture Pro Mobile Dock Mount For Steam Deck Mount anywhere here in the EU and after not finding anything available on the various 3D printing sites, I decided to make my own that would fit to my existing Steamclip.

Pobrania
113
Polubienia
14
Ocena
0
P

SEGA Dreamcast - GDemu modular mounting bracket

Instructions This bracket was designed for the GDemu, the one I had was the recent release from AliExpress, please let me know if it doesn't fit yours and I can adjust the base as required! It's designed as modular system, and the…

Pobrania
112
Polubienia
27
Ocena
5

Gloomy Dreamcatcher

Gloomy Dreamcatcher

Pobrania
109
Polubienia
46
Ocena
0
P
Printablesporkloin

Beamcase ATX Split-Panel "Loop" Case Panels

This a set of split panel case panels for Beamcase ATX, inspired by the “Loop” case panels for Beamcase SW. This design is specifically made to be printable on a 256^3 bed volume, such as Bambu P1/P1S/X1C. On a printer of that size, most…

Pobrania
109
Polubienia
29
Ocena
0
P
Printablesmafredri

Dreamcast power supply port to DC plug adapter for picoPSU

Adapter for attaching a DC plug to the Dreamcast power supply port, e.g. for use with picoPSU. I designed this from scratch in Fusion 360, but it's based on collingall's work. My main goal was to create a model that prints well without…

Pobrania
108
Polubienia
11
Ocena
0
P
PrintablesFirstflight

Logitech StreamCam Lens Cover

Printed in PLA with layer height 0,15mm, no supports.

Pobrania
107
Polubienia
9
Ocena
4,33
P
PrintablesKamp

Dreamcast VMU Shell

This is a one to one recreation of the VMU shell based on 3D scans (Scans created by WeskMods: https://bitbuilt.net/forums/threads/dreamcast-vmu-scan.3988/ ) You'll want to reuse all of the original hardware used in the VMU. For the heat…

Pobrania
106
Polubienia
12
Ocena
4