39 591 modeli
This is adapter that relocates the PSU power switch on PRUSA CORE One (and CORE One +) to more accessible location. I'm happy with how the adapter works and if you also have trouble reaching the back of the printer, I'd be happy for you…
Wydruk około 2,78 €–3,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE : I had issues printing the honeycomb when the two pieces were not aligned 100% the same. Caused an issue when I inserted the 1/8" rods (not being perpendicular) So, I added three 1/8" holes that would always print the same place,…
Wydruk około 5,19 €–6,35 € nettoWstępna wycena jednego wariantu
The Velociraptor Head is a little more complex to print than many of my other animal heads because the teeth require support. You will probably also want support for the back of the jaw, but this model printed fine for me without support…
Wydruk około 21,38 €–26,13 € nettoWstępna wycena jednego wariantu
Simple tool for lubricating LM8UU bearings. Print instructions New version! We found a few things we could improve, so we did, as we always do :-) Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Minimalist Duplo - Brio, IKEA, Wooden Train adapter that you can use for connecting Duplo bricks with wooden train tracks to make bridges and slopes. The peg on the outside is modified a bit so it fits on a Duplo brick too. Print with…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This holder for the Prusa Mini power adapter/supply, uses very little material and takes short time to print. It is designed to use with a countersunk screw of Ø4mm with a Ø7-8mm head. The two brackets provide great support and require as…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena jednego wariantu
Universal 2.5" SSD/HDD to 3.5" HDD bay adapter. No screws required Supports side rails Recommended to print in PETG No supports required NOTE: Aligns the 2.5" drive to the center - not suitable for enclosures that have a fixed SATA…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
SSD or HDD adapter from 3.5" to 2.5" drive. You are going to need 4 countersunk screw M3x6mm for mounting drive to the 3D print If your drive needs the connectors to be in the same position as those on a 3.5-inch drive, it won't be…
Wydruk około 1,46 €–1,79 € nettoWstępna wycena jednego wariantu
Hi guys, after the disaster of ordering the M2-M3 BoboVR conversion kit today I decided to do a quick and dirty remix this great Quest 3 to Quest 2 Head Strap adapter by HB. (Many Thanks) It's far from perfect. USB cable has to go in back…
Wydruk około 1,79 €–2,18 € nettoWstępna wycena jednego wariantu
Allows you to use a 3.5 in HDD hot-swap bay with your more popular 2.5 in SSDs. ****Edit*** I added two new files v2, I rounded off the edges I think it looks nicer. ****Edit*** I've added a Riser so you can easily use the more readily…
Wydruk około 2,98 €–3,64 € nettoWstępna wycena jednego wariantu
360° Spinning Adapter for the Multifunction Arm Mounting System What you need Multifunction Arm mounting system (Small Arm System) Big Clamp For Small Arms This Spinning Adapter Side small-NUT-M3.stl (1x) screw-small.stl (1x) Hardware…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu
Captain Jack Sparrow
Wydruk około 19,15 €–23,41 € nettoWstępna wycena jednego wariantu
This is a cute velociraptor figure. Easy to print and easy to paint. He likes long walks and classical music. You gotta watch for your fingers though.
Wydruk około 1,16 €–1,42 € nettoWstępna wycena jednego wariantu
For sealing you can eather use a o-ring gasket D20x3mm or print the gasket with tpu or flex material. The gasket has to be placed on the bottle side inside the thread-hole Supports are only needed for the outer ring, i used a…
Wydruk około 2,01 €–2,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
simple part to hold two IKEA-Lack tables stacked over one another. No bolting necessary. Print instructions You will need 4 for a stable stack. I print was done in PET-G, 0,2mm layer on a MK3s. Print works well without support. Update…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Had to print using 2mm raft to stick on build plate. Print with thicker side of the model upward shown in photo, no supports needed. May require some strands to be cleaned up when done printing. You can find adapters on Amazon but why not…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
UPDATE: Version 3 included with better tuned dimensions and fixes based on feedback. UPDATED UPDATE: Thanks to Crosslink for featuring this in his video!! The extruder on the SV06 can get quite hot, due to the weak stock fan, especially…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Based on the fantastic spectra cartridge designed by James Tipton, I've modified it to take full cartridges of film and fit a little more snugly, removing the most tricky aspect of reloading my spectra. Required Materials: Conductive…
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
This is just a sample. Get full model from here . Instructions Gcode files are without top and bottom layers to get this honeycomb look. If You prefer to slice it yourself, then settings are: Perimeters: 3 layers Support material:…
Wydruk około 11,24 €–13,74 € nettoWstępna wycena jednego wariantu
Prints PETG in 0.2mm layer height with no supports, a 5mm brim around adapter helps with bed adhesion. This is suitable for use with Sharpie fine point pens. Print upright with thin part of the adapter touching the build plate. No…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was looking for an adapter, but didn't find a perfect solution for my task. So i've ended up with this remix/ combination of these two items: https://www.thingiverse.com/thing:2122826 https://www.thingiverse.com/thing:62800 Thanks to…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
I designed this piece to mount IKEA SKÅDIS boards onto a wall using regular screws. The board does come with screws and a mounting bracket, but I was looking for a more flexible solution: with this adapter you can mount the board on…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
Flat version of the Domed Cover...SnapAssy. Please NOTE! Remove the MicroSD Card before assembly and disassembly! You will need... Noctua 40x40x10 MM Fan 5V 2 Dupont female single pins to connect to 5V or 3.3V and Ground GPIO pins. You…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
For my new Eurotronic Spirit smart radiator valves I needed a clean and easy adapter. There are many adapters out there that are quite bulky, couldn't figure out why that would be necessary... So designed my own in a few minutes. My…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
My obsession with IKEA Skadis made me want to add one to the side of the Kallax I have in my office. So I designed some holders to achieve just that. They are mounted to the two top screws of the Kallax and have slots for an M4 nut in…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an adapter that allows you to convert an empty Prusament plastic spool to a master spool. Motivation I love the concept of the master spool, but it's quite a heavy print (6+ hours for part B, 12+ hours for Part A). I saw that the…
Wydruk około 5,49 €–6,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A universal adapter to hold a Parkside PAP 20 A1 (Lidl) battery. You can add holes in Prusaslicer 2.4+ or in any other software to connect it to the machine. No supports needed. Feel free to tell me for improvements.
Wydruk około 2,88 €–3,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
V2 of this project comming soon. New version of is model avaliable here. The printer get way quieter after the change, the best mod I did on my Ender 3 You will need 2 M3 screws and a 4010 fan, of course. If you like this model check out…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Smart holder adaptér držák vychází z originálu, který byl modifikován pro sportovní sedadla vozidel značky Škoda, včetně pojistky proti vyndaní pokud je vložen držák multimédií ;) postup: tisk z PET-G (z důvodu vysokých teplot ve voze v…
Wydruk około 3,90 €–4,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gardena connector to tyre valve adapter, I used the ring seal of an original adapter but you can also print one with TPU (file included). Perfect to blow the water out of garden hoses or tubes before the winter with a compressor. Update…
Wydruk około 0,62 €–0,75 € nettoWstępna wycena jednego wariantu
Passionate about aeronautics, I drew this model because it is one of my favourites plane. Designed in several parts, this model can be printed without difficulty and with very few supports. With this model I introduce a new assembly…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
01.12.2024: Added a version without the logo as requested as well as a step file so you can add custom logos if you want to. I created this model in order to use my phone with a QuadLock Mount I bought. It just goes on the back of a…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE: As with my original stand, I had issues printing this when the two pieces were not placed on the bed in the exactly the same orientation. (The honeycomb infill would ‘move around’ to get a best fit). In that case my support rods…
Wydruk około 5,87 €–7,17 € nettoWstępna wycena jednego wariantu
Based on https://www.thingiverse.com/thing:10475 Remodelled it from scratch using FreeCAD so it wasn't too small. Use a lot of perimeters while printing (I used 6). You can find the FreeCAD file at…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Smart holder adaptér !!!POZOR - pouze pro Colorprint!!! držák vychází z originálu, který byl modifikován pro sportovní sedadla vozidel značky Škoda, včetně pojistky proti vyndaní pokud je vložen držák multimédií ;) postup: vložit model a…
Wydruk około 5,10 €–6,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Captain Jack Sparrow from Pirates of the Caribbean with base.
Wydruk około 9,95 €–12,16 € nettoWstępna wycena jednego wariantu
Slim cans or "sleek" cans do not fit well in all cup holders. This adapter has a flexible design to work well in a wide range of vehicles. I have tested in multiple vehicles without any issues. Print using a material that won't melt in a…
Wydruk około 1,93 €–2,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This adapter allows you to rack (19") network elements of the TP-Link manufacturer, more precisely the OMADA business range. Unfortunately the manufacturer has not planned to be able to rack this equipment via holes and brackets, many…
Wydruk około 3,18 €–3,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hallo zusammen, da ich viele leere, blaue SUNLU Refill-Spulen (V2) habe und keine Lust hatte, für die verschiedenen Farben der Refills von der Recyclingfabrik extra Spulen zu drucken, habe ich mit Fusion 360 einen Adapter entwickelt, um…
Wydruk około 2,47 €–3,01 € nettoWstępna wycena jednego wariantu
This is my take on a hard drive adapter to allow mounting 3.5" drives to 5.25" bays. This includes front mounting points for a 120mm intake fan if desired (usable when installed in 3 adjacent bays).
Wydruk około 3,88 €–4,74 € nettoWstępna wycena jednego wariantu
This very fast print can be mounted over any selfie camera (mainly designed for Tesla interior cameras). If you use it for laptops, ensure that it does not damage your display (as the Slider is not flush with the housing. Be sure to print…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Works with both Prusa SL1 and SL1S Speed printer. The Prusa SL1/S Speed Drip Adapter holds the build platform at an angle to allow excess resin dripping of the platform and model. The fixture is rigid and frees up both hands to release…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Arctis Nova Pro uses a different ear cup mounting mechanism than past headset versions, preventing the use of existing replacement ear cups. Along with the availability of compatible replacements only using faux leather (hot and…
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
This small adapter is a quick solution to use PC4-M6 fittings instead of PC4-M10 fittings. I printed them in PLA because PETG is unfortunately too soft and you can screw them into the M10 thread with an 11mm wrench. Print Settings Rafts:…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
PC4-M10 adapter for the MMU3. Remix of vertigo235's great adapter for the MMU2. Prints perfectly fine without supports @ 0.2mm layer height.
Wydruk około 1,34 €–1,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you have a camera capable of taking 220 roll film you can use it to expose a full roll of 35mm film using the adaptors in this print. I've tried other 3D-printed adaptors but none worked in my Hasselblad A24 magazines, which is why I…
Wydruk około 1,56 €–1,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was looking for an adapter to try and connect my Makita DMP180 cordless inflator (that fits on standard car tire valves) to the socket of my wifes Fanatic SUP. The adapters I found here on Printables.com unfortunately did not seem to…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
Compatible with standard garden hose fittings Mounting plate with holes for secure attachment to wood with zip-ties, screws or any other method Included broom stick adapter for attaching to broomstick shaft or anything similar. (use…
Wydruk około 3,09 €–3,78 € nettoWstępna wycena jednego wariantu
Remix of design found here: https://www.thingiverse.com/thing:1668774 I added some screw sockets, 3mm thickness and moved the place for PSU to the bottom, so the PSU lies flat on the case. Tested with SilverStone TX500 and TX700. PSU fan…
Wydruk około 1,56 €–1,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
dosen't actually work
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
This is a 30.5mm to 20mm FC adapter. The 20mm mounting uses 2mm screws and can be tapped as is. Fits my Xrotor nano stack perfectly! Category: R/C Vehicles
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
Adapter um ein Homematic IP Gerät an ein Danfoss RAVL Ventil anzuschliessen. Das sollte auch mit anderen Ventiltrieben, die auf ein M30 x 1.5 Gewinde aufsetzen, funktionieren. Getestet habe ich es aber nur mit verschiedenen HmIP Geräten.…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE 17.09.2023. -Added 20 mm hook version -Making hook parametric so users can easily change laptop thickness and adjust it to their own needs This is extra strong VESA laptop holder designed to use advantages of printing parts in…
Wydruk około 9,51 €–11,62 € nettoWstępna wycena jednego wariantu
Dieser speziell entworfene Adapter ermöglicht es Ihnen, Ihr Smartphone im Hochformat (Vertikal) sicher im Bosch Smart Grip Smartphonehalter zu befestigen. Damit erweitern Sie die Funktionalität Ihres Bosch Smart Grips und können Ihr…
Wydruk około 1,43 €–1,74 € nettoWstępna wycena jednego wariantu
This is airflow optimized SSD mount in the 3,5" Supermicro drive sleads. This is based the OEM MCP-220-00043-0N mount and works with 7mm thick SSD and 15mm (use the SAS version), let me know i you need a diffrent size. This is made to…
Wydruk około 4,42 €–5,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a strange use case: use a traditional vacuum cleaner to clean a robotic one. The official robot cleaning guide says you have to clean the dusty filter with tapwater. If you do so you close the pores of the filter by creating a…
Wydruk około 3,90 €–4,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Laptop raisers that are compatible with the 2019 version of the Acer Nitro 5 Gaming Laptop. They slide into place on the underside at each end using the screw holes as an anchor point/guide. Good for improving airflow or better…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description I wanted something that could elevate my MacBook Pro 13" while letting me close the lid. Many other “elevators” hooked onto the sides of the laptop, preventing the screen from closing. Version 1 : a simple rounded bar, width…
Wydruk około 1,11 €–1,36 € nettoWstępna wycena jednego wariantu
German: Dieser Adapter ermöglicht die Verbindung von Duplo-Steinen mit Holzeisenbahnschienen, ideal für den Bau von Brücken und Abhängen. Der äußere Zapfen wurde modifiziert, um auch auf einen Duplo-Stein zu passen. Verbesserungen:…
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
Einfacher Laptophalter, die Stangen Sind in verschieden Toleranzen verfügbar Simple laptop holder, the bars are available in different tolerances
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
Update January 2025 Just a minor update after some feedbacks about a loose fit. It's easy to swap on purpose, but maybe it really was a little to dependent on the seam the old printer made. 😅 Anyways here's a slightly tighter version with…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
When dealing with lots of spools and especially with refill filaments, sooner or later you will find yourself with a tangled spool which can only be saved by respooling the filament. So I was looking for a quick and easy solution to…
Wydruk około 2,48 €–3,03 € nettoWstępna wycena jednego wariantu
Use this adaptor to connect your vacuum hose. You need my further adaptors to connect this adaptor to your woodworking machine. I would be happy if you would design more adapters for the basic module. You can finde a file with the basic…
Wydruk około 3,17 €–3,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
140mm Fan to 100mm Duct Adapter A simple, no-supports adapter that connects a standard 140mm fan to 100mm (4") ducting. Great for fume extraction, workshop ventilation, and general airflow projects. 🔧 What it's for Soldering / 3D printing…
Wydruk około 2,24 €–2,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I'm switching to a standing desk and bought a mount to hold my monitor and other accessories off the table. I either threw away the original adapter or my monitor didn't come with it, so I searched online for options to purchase. The only…
Wydruk około 6,36 €–7,78 € nettoWstępna wycena jednego wariantu
2024-07-25: Dust was getting in where the print slots into the CPAP. The V3 design has a much tighter fit which should help alleviate the issue. I recommend adding tape around the connection where possible. 3M 2091 filters are about the…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
Updated 05/22/2025 Allows for the use of two Ryobi 18v batteries in place of a 40v battery. Suggested print settings: - 0.20mm QUALITY - PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 20% - Infill pattern Grid - 3…
Wydruk około 2,20 €–2,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print Instructions: filament: PLA or PET-G infill: 100%
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
This adapter is made so it's possible to fit an larger coffee cup in the front drink holders of a Skoda Enyaq. Not recommended to use PLA due the possible heat in the cabin in the sun.
Wydruk około 4,57 €–5,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wanted a nice VESA 75 to 100 adapter for use with a Raspberry Pi 4 case for an Android TV project I am working on, and I modded this one by removing the dovetail, and duplicating the cutouts to skeletonize it. v.1.1 Fixed M4 hex nut…
Wydruk około 2,20 €–2,69 € nettoWstępna wycena jednego wariantu
Makita PJ7000 to Festool 27mm CLEANTEC hose connector. Replace existing hose connector.
Wydruk około 4,24 €–5,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This threaded adapter converts from 3/4" garden hose female to 15/16" faucet male. Make sure to use a washer on the garden hose side. There are two version of the .stl file, one with a built-in supporting ring (break it off after…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
This prints in two pieces to avoid the need for supports and is easily assembled with a few dabs of super glue. The cup portion was designed to fit our “ThermoFlask” water bottles and the base is designed to fit the cup holder of our 2020…
Wydruk około 4,37 €–5,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
print in shown oritation, pause at layer 51 (14,40mm) and toss in a M4 nut in both. enjoy i used 0.6 nozzle on CR-10 Smart (klipper) layer height 0.28, layerwidth 0.72. 100-125mm/s 3Dsupreme PLA+ off white (colour seemed to fit)
Wydruk około 1,64 €–2,01 € nettoWstępna wycena jednego wariantu
This connects ¾" male NPS (i.e. NPT, MPT) threaded parts (e.g. " 3/4" x 1/2" Schedule 40 PVC Reducing Male Adapter ") to ¾" garden hoses. Increase the perimeters until the piece is completely solid to it will stand up to the water…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu
Adapter for connecting a 6mm PTFE hose to a 4mm reverse bowden PTFE tube. The holes are 4.1mm or 6.05mm in diameter and approx. 10mm deep. They therefore form a friction fit after contraction during printing. A conical area is provided…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Replace the cable with a plugit adapter. The change is reversible. Needed: Festool replacement part # 489742 two #6-32 x ½'' machine screws To install: Mark which plugit adapter cable replace the black/white cable Remove the cable, strain…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
1 inch (D=32mm) female adapter for quick coupling garden hose to water tap. It can be printed without supports. O-ring is needed (Outer diameter = 16mm, inner diameter = 11mm, seal cross section = 2,5mm) and gasket between water tap and…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was wondering if Quest 2 straps could be made compatible to the Quest 1. Indeed, it is possible. I liked the design of @sekazi (https://www.thingiverse.com/thing:4624192), but the adapter is movable, so I decided to make it 2mm longer…
Wydruk około 1,95 €–2,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
second version of his model with better detail The gcode is a 2 colors print with variable layer height. In the file list you will find the shield alone.
Wydruk około 4,36 €–5,33 € nettoWstępna wycena jednego wariantu
Make sure to like and rate the file if you found it useful! Tips are also appreciated if you'd like to see more files from me or if you would like to request changes or updates to files! Tip Via Stripe Tip Via PayPal A hard drive bay…
Wydruk około 2,36 €–2,89 € nettoWstępna wycena jednego wariantu
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Wydruk około 1,59 €–1,95 € nettoWstępna wycena jednego wariantu
I wanted to be able to plug one or more external batteries into RYOBI tools. I designed this adapter to fit in where the battery normally attaches. For example, with a RYOBI Inverter, you can connect a bank of 18V batteries and have a…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Another edit of a Disney infinity fanart model on SketchFab by JohnLogostini . This is my printable version of it, with a lot of detail in the model itself, instead of maps. Printed at 10cm high on my mk3s+ I added a photo of that print,…
Wydruk około 5,15 €–6,29 € nettoWstępna wycena jednego wariantu
4 versions 14.6 mm battery hole and thread for M3 and M4 screw. 14.8 mm battery hole and thread for M3 and M4 screw. I used M3×10 and M4×12 screws. 🔋IKEA LADDA Rechargeable battery, HR06 AA 1.2V, 2450mAh – version 14.6 mm. 🔋LIDL TRONIC…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Adapter for the new 62.5 mm diameter (2.46 inches) Sunlu spools to 55 mm (2.16 inches) spools to work with the AMS Lite . It has 2 tabs for better attachment to the spool. No print support needed with this model. Print with 15% infill. It…
Wydruk około 1,97 €–2,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Vacuum adapter that fits Ryobi orbital sander output to Ridgid shop vac Printed in PLA at 20%, worked pretty well so far for me. Designed from: https://www.thingiverse.com/thing:1246651
Wydruk około 1,92 €–2,34 € nettoWstępna wycena jednego wariantu
Small clip to cover the webcam of the laptop for security when not using it, you can remove or slide it to a side to use the webcam. Print it over one side (see picture of the piece on the printer bed), so it will have some flexibility to…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
I think Ryobi is missing a huge market opportunity. I have a ton of Ryobi Tools and Batteries (1000+ Wh worth!). I've made several prototypes that use Ryobi 18V batteries to charge USB ports or run a 13.8V regulated cigarette socket. I'd…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
This is a quick release vacuum attachment adaptor for the Festool QF 1400 EBQ Router vacuum attachment, which is designed to fit the Festool shop vac. It should fit other Festool tools also, but I don't own any others to confirm. Designed…
Wydruk około 2,13 €–2,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A ring adapter I made for after market speakers I installed. Print instructions Nothing special, think I used ~30% infill.
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
An adapter for Casio watches to wear a NATO strap. The 16mm lug size will fit most of the G-Shock watches upto 22mm wide straps. The 18 mm will fit bigger G-Shocks and Pro-Trek watches upto 24mm wide straps. The image shows a Casio…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
I wanted to mount my DSLR to an old Olympus VMT microscope. Found a fitting camera attachment (on ThingiVerse) and made a remix with a fitting cylinder for the microscope. Also made one for a cheap Bresser Microscope (but it doesn't…
Wydruk około 2,31 €–2,83 € nettoWstępna wycena jednego wariantu
Gardena to G1 adapter suitable for flat G1 sealing washer. Printed upside down with suports to get smooth place for the inner sealing washer. Thanks to Mike to his original model.
Wydruk około 2,35 €–2,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Idea: hide the record player pin inside the tower (up to 19 mm) show as much as possible of Hogwarts around the tower Design Process: I modeled everything myself but used this model as reference Overall dimensions: weight height…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
The Temset radiator uses a valve for which no adapters seem to exist. But for the installation of an eQ-3 eqiva thermostat, an M30x1.5 thread is required. The adapter makes it possible to install such a thermostat but the pin of the valve…
Wydruk około 1,29 €–1,57 € nettoWstępna wycena jednego wariantu
These parts allow you to mount standard 12mm hex wheels to your 3D Sets Rancher. The parts include a 12mm sleeve and a 12mm diameter washer to keep the 3mm screw centered. Don't know what this is? Check out the fully 3D printable 4WD RC…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
![Universal Parkside Battery Adapter [PAP 20 A1]](https://media.printables.com/media/prints/108918/images/1078299_f1a15a72-f130-43d8-867a-9151b1efc70e/img_20211230_150124.jpg)
