Liczymy pasujące modele…
Inspired by https://www.prusaprinters.org/prints/63523-laptop-stand I created this stand that raises the laptop a bit higher. It is compatible with Prusa Mini and I printed it with Prusament PLA Galaxy Silver with 0.2 layerheight, no top…
Wydruk około 3,55 €–4,33 € nettoWstępna wycena jednego wariantu
This is an stand for an latop iPad and an e-book with al hexagonal pattern. There is also a solid version if you prefer a cleaner look. If you want to modify it to fit perfectly on your devices follow these steps. Measure the width of…
Wydruk około 7,95 €–9,71 € nettoWstępna wycena jednego wariantu
UPDATE : I had issues printing the honeycomb when the two pieces were not aligned 100% the same. Caused an issue when I inserted the 1/8" rods (not being perpendicular) So, I added three 1/8" holes that would always print the same place,…
Wydruk około 5,19 €–6,35 € nettoWstępna wycena jednego wariantu
Print-In-Place Folding/Expanding Laptop Stand that holds my 14" Dell Latitude 4500 Laptop at 45 degrees with zero issues. All interlocking parts are designed with 0.5mm gaps. Print instructions 0.4mm nozzle 0.2mm layer height 20% Infill 3…
Wydruk około 5,49 €–6,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Laptop stand with cables holes. In slicer remove top and bottom layer and add infill as wanted. I used honeycomb. For link I recomend use at least 45% infill. I use more than 2 perimeters to make it stronger. Material: PLA, ABS, PET-G,…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena jednego wariantu
Laptop stand for my 15" Dell Vostro Two versions: with Dell logo without any logo You can also use the Fusion 360 (.f3d) source file with customizable inner gap via user parameters for other models. The inner gap for laptop is 23.5 mm…
Wydruk około 6,83 €–8,35 € nettoWstępna wycena jednego wariantu
Update 16.12.23: STL files are now available English: A raised laptop stand with a honeycomb design. Additional I designed a fitting tray to hold the clutter of your desktop and a cable clamp that can bei fittet into the honeycombs where…
Wydruk około 5,31 €–6,49 € nettoWstępna wycena jednego wariantu
I printed a set of these but found them to not fit my Razer Blade laptop and also being a bit large. The angle the laptop gets with the original stand made it uncomfortable using the keyboard, I just wanted a very slight lift to help with…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Simple sliding cover for your laptop camera. Use thin double-sided tape to attach.
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Raptor Engine from SpaceX Starship program. I've been following Starship for some years now, and I've always wanted a Raptor Engine to display. I could not find any on Printables or Thingiverse, so I decided to give it a shot and make my…
Wydruk około 6,33 €–7,73 € nettoWstępna wycena jednego wariantu
It's a minimalist stand, with a customizable width. Perfect for anything. Need More Slots?: Prints this Divider separately. Have all the slots you want! Adjust The Width: You can stretch the base model in z-direction in the slicer for a…
Wydruk około 1,28 €–1,57 € nettoWstępna wycena jednego wariantu
Laptop stand for smaller laptops with a maximum width of 2cm (0.79 inches).
Wydruk około 3,43 €–4,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I couldn't find a vertical clamshell stand that meets my requirements, so I made my own. Fits the 14-inch and 16-inch M1 Pro/M1 Max MacBook Pro (2021 model), and is designed to be used with adhesive non-slip rubber feet. Beta version…
Wydruk około 4,50 €–5,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a laptop stand/riser that's ultra portable and easy to print. Tested on Asus G14. Should work for most laptops. Print time about 1:30 h (for the pair) I've printed mine using PLA 0.25mm, 20% infill (default Prusa slicer profile…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
these easy to print and small laptop stand. ensure ventilation while gaming or rendering etc.. have fun world Print instructions these easy to print and small laptop stand. ensure ventilation while gaming or rendering etc.. i added my…
Wydruk około 3,05 €–3,73 € nettoWstępna wycena jednego wariantu
This battery adapter is used in multiple of my other designs. For Makita 18V Batteries, see my design here: https://www.printables.com/model/436132/ For Milwaukee M18 Batteries, see my design here:…
Wydruk około 4,30 €–5,26 € nettoWstępna wycena jednego wariantu
This is just a sample. Get full model from here . Instructions Gcode files are without top and bottom layers to get this honeycomb look. If You prefer to slice it yourself, then settings are: Perimeters: 3 layers Support material:…
Wydruk około 11,24 €–13,74 € nettoWstępna wycena jednego wariantu
Update 25.03.2024: Added a parametric and customizable version of the stand. Improvements The model was developed to enable fast and material-saving printing and at the same time to be stable. The print in size 25mm requires only 42g of…
Wydruk około 1,74 €–2,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Flat version of the Domed Cover...SnapAssy. Please NOTE! Remove the MicroSD Card before assembly and disassembly! You will need... Noctua 40x40x10 MM Fan 5V 2 Dupont female single pins to connect to 5V or 3.3V and Ground GPIO pins. You…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Nozzle contamination can be seen on the back.
Wydruk około 1,84 €–2,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Passionate about aeronautics, I drew this model because it is one of my favourites plane. Designed in several parts, this model can be printed without difficulty and with very few supports. With this model I introduce a new assembly…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
This battery adapter is used in multiple of my other designs. For Bosch 18V Professional Batteries, see my design here: https://www.printables.com/model/427974/ For Milwaukee M18 Batteries, see my design here:…
Wydruk około 4,45 €–5,44 € nettoWstępna wycena jednego wariantu
UPDATE: As with my original stand, I had issues printing this when the two pieces were not placed on the bed in the exactly the same orientation. (The honeycomb infill would ‘move around’ to get a best fit). In that case my support rods…
Wydruk około 5,87 €–7,17 € nettoWstępna wycena jednego wariantu
When using my notebook at home, I connect it to a usb-dock and therefore need to securely store it on the side of my desk. First I made a hex version , but I was not happy with my first design, so I created this more elegant model. It…
Wydruk około 2,32 €–2,83 € nettoWstępna wycena jednego wariantu
As mentioned in the title, it's a Laptop Riser! The hexagonal grid of the prusament spools makes very easy to attach some bolts and nuts to it. I was in need of a laptop riser that could release the neck pain of always looking down while…
Wydruk około 5,86 €–7,16 € nettoWstępna wycena jednego wariantu
This simple laptop stand rises the rear side of your laptop by 22mm to improve cooling and give a slight angle to the keyboard. Unlike other models, this one is all of the following: Simple and not over-engineered Stable Light, but sturdy…
Wydruk około 2,36 €–2,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you have a camera capable of taking 220 roll film you can use it to expose a full roll of 35mm film using the adaptors in this print. I've tried other 3D-printed adaptors but none worked in my Hasselblad A24 magazines, which is why I…
Wydruk około 1,56 €–1,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
dosen't actually work
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
When using my notebook at home, I connect it to a usb-dock and need to securely store it on the side of my desk. So I made this stand to have it stored neatly and provides good air flow for cooling. This model consists of two feet and a…
Wydruk około 2,46 €–3,00 € nettoWstępna wycena jednego wariantu
Laptop raisers that are compatible with the 2019 version of the Acer Nitro 5 Gaming Laptop. They slide into place on the underside at each end using the screw holes as an anchor point/guide. Good for improving airflow or better…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Summary Inspired by the Geometric Adjustable Laptop+ Stand by ConMacDesign (thanks!), this stand design is foldable, adjustable (4 positions 15°, 25°, 35° and 45°), portable (you can put it in your notebook bag) and, moreover, printable…
Wydruk około 4,19 €–5,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A Cap for the "Prusa lubricant LM8UU adaptor" Designed by Honza David. This is ONLY the Cap, for the adaptor check out David Honza´s Design. It is a loose fit . If you want it to be tight scale in down in the slicer. “With some trial and…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to design the world's smallest laptop stand (based on prior models). I printed this in PLA 0.16mm, with 0.4 nozzle, 15% infill, no supports 5x2mm magnets: https://link.amazon/B0341p7Q7 (affiliate link) I have a youtube video…
Wydruk około 2,85 €–3,49 € nettoWstępna wycena jednego wariantu
This is the F22 raptor a stealth fighter of the 5th generation of jets when printing use supports for better quality and it can hold its self up all by its self as well
Wydruk około 2,07 €–2,52 € nettoWstępna wycena jednego wariantu
Schrader tyre valve to airbed mattress valve adaptor, Printed in PLA. No supports. Print wide end down. Requires you to punch out hole with small screwdriver Used variable heights in Prusaslicer, main body printed @ 0.2 and screw thread…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
This is a simple little Opening Tool e.g. to: remove phonedisplays open laptops/notebooks/tablets,… open/remove car parts remove E-cigarette-tank-glasses/atomizers or other areas of application…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Never lose a drop of e6000 again! This thing adapts the e6000 nozzle to a luer lock so that you can load a glue syringe easily. To use: Screw the luer lock end on a syringe Jam the nozzle of e6000 in the other end Squeeze the e6000 tube…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
This is the ultimate laptop holders organization kit. This will help you organize all necessary accessories for your laptop. Your desk will look extra clean. Kit includes : AirPods Holder with optional camera cover Single camera cover…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
Design is a simple “foot” that supports a laptop vertically. Print two. "It's better than balancing your laptop on its edge!" Can be printed upright or on its side, no special settings needed. There's enough of a gap between stand and…
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
Share what you make!
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
Simple angled laptop stand for my Macbook Pro. Wanted a sharper angle to take up less deskroom. Will likely support other laptops -- the gap between vertical supports is 17mm. Inspired by this design but rebuilt in Tinkercad. I wanted to…
Wydruk około 3,17 €–3,87 € nettoWstępna wycena jednego wariantu
A little Adapter that can simply be pushed on the standard spoolholder on the Original Prusa i3 MK3S+ 3D printer. With the Adaptor you can now hold 2kg spools and still can fit a small/1kg spool on the holder without removing the adaptor.…
Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu
Fan mount and air flow duct to allow the use of a larger and more powerful Noctua (or other 40 mm) fan to improve the cooling of the cool end of the extruder. This will help when printing PLA in particular to avoid heat creep issues. The…
Wydruk około 2,06 €–2,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A laptop under desk mount top shelf supports a 28mm laptop and bottom shelf supports a 30mm laptop. Has side cutouts to allow power and USB-C connections.
Wydruk około 8,44 €–10,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An adaptor to fit 80mm air duct onto a 100mm inline fan. The fan pipe outer diameter should be a few mm less than 100mm, and the adaptor should be a perfect fit. If your fan is not a good fit, scale the model using larger inner wall…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a vertical laptop stand that you can resize in your chosen 3D modelling software.
Wydruk około 5,18 €–6,33 € nettoWstępna wycena jednego wariantu
Dewalt 7485 Table Saw Vacuum Adaptor for Ryobi Shop Vac
Wydruk około 4,26 €–5,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've printed finke stand but it appears it was to small for my 15,6" laptop so I designed an extra leg so the laptop is not tilting backwards. The leg is pressed into the triangle hole of the leg. It is a nice tight connection but it is…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
A clip to mount the Dell WD15 laptop dock to the underside of the desk for cleaner cable management.
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
Print in place and no supports needed and in less than 30 min! Print orientation as shown in photo above. The overhang of the hinge is unnoticeable once printed and works perfectly fine without supports. Recommended print settings: 0.4 mm…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
I use this adapter for faster and easier connection of my laptop at my office. Now i only need to plug in this adapter and it is connected with power, display and usb devices. For device connection, i use FITLONG 8-in-1 USB C Hub.
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Prints very well standing on the GEX side. Pictures are in Sunlu PLA+ red. Printed on Elegoo Neptune 4 Pro Weight: 23 grams Nozzle: 0.4mm Layer Hight: 0.3mm Line Width: 0.4mm Wall Thickness: 0.8mm Infill: 10% Gyroid Time: 31m
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
Add more slots to your Minimal Stand with this divider. The Divider is 5mm thick, please adjust the peg's length accordingly. Prints Settings: Supports: Tested with no support. Layer height: Tested with 0.2mm. Infill Pattern: 3D…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
Adjustable stand to hold laptops in vertical position for storage or use with a separate monitor. Build Info: PLA 0.3 layer height 2 perimeters / 30% In-fill/no supports
Wydruk około 6,13 €–7,50 € nettoWstępna wycena jednego wariantu
Stand for two laptops, for storage or use with docking station. One bay is 18mm wide and the other is 24mm wide.
Wydruk około 6,31 €–7,71 € nettoWstępna wycena jednego wariantu
Hey all, I'm back again, this time with an almost vertical laptop stand. I needed a more vertical stand for my desk so I changed up my standard stand a bit. Takes up a bit less real estate and puts the monitor a few inches higher. I also…
Wydruk około 2,39 €–2,92 € nettoWstępna wycena jednego wariantu
I created this adaptor plate because I wanted a cup holder on my electric scooter. There was a lot of options for bicycles (even a standard mounting system) but nothing for a scooter. This adaptor plate bolts onto the steering stem of the…
Wydruk około 2,87 €–3,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To connect your bosch PEX 300 AE to a kärcher vacuum hose (you need my hose adaptor)
Wydruk około 2,36 €–2,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created my Velociraptor Claws Scratcher for everyone, who like Dinosaurs and need stylish Scratcher :-) I tried to design my new model like funny and useful tool, to can scratch on too far places, like back. I took a one original model…
Wydruk około 4,32 €–5,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
laptop stand at 40 degrees for small 13 inch laptops
Wydruk około 2,24 €–2,73 € nettoWstępna wycena jednego wariantu
A decorative “warning sign” for chicken. I printed this in “Mango Yellow” and “Matte Black” Prusament PETG, and it came out super nice. Simply change the material half-way through the print (see 3mf file). The chicken silhouettes are from…
Wydruk około 4,15 €–5,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've requested an Abus adaptor to Nuki but my new cylinder doesn't have the shape of that adaptor but an 9.9mm cylinder instead so I had to create this adaptor for it.
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just to keep them together.
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
The newest model is there : Laptop Stand “Air Flow” Designed for prusa MK3s or the printers with same or more printing area. Comfortable to write on and effective at cooling your computer. You can also put a copybook under the computer to…
Wydruk około 9,07 €–11,09 € nettoWstępna wycena jednego wariantu
Magnet based on the F-22 Raptor. Minimal model. Uses 6mm x 3mm magnets. G-Code has a layer pause at 3.8mm to drop in magnets.
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Allows up to 19mm Laptop thickness +/- tolerances of your printer. Mount conservatively with 3M doubled sided 9080 tape (you don't need much). Printed in PETG @ 0.30mm layer height, 15% gyroid infill (modified 0.30mm DRAFT) on Prusa i3…
Wydruk około 4,29 €–5,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sign: BEWARE: Chickens are raptors - 20 cm, three colours
Wydruk około 3,02 €–3,69 € nettoWstępna wycena jednego wariantu
I had this AQUAPUR adaptor for quite some time, but doesn't fit on my DREAME XR vacuum cleaner. So I remixed design from 3D Galaxy . I printed in PETG Infill: 30% or 40% Layer Height: 0.20mm Supports: Yes, organic If you like my work…
Wydruk około 3,30 €–4,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
laptop stand at 30 degrees for 14inch laptops
Wydruk około 2,42 €–2,95 € nettoWstępna wycena jednego wariantu
Another accessory for Vit Budina's Ford Raptor. I used snug supports.
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
Go Pro Mount adaptor to suit Haydn Fiberglass extension pole. The one I used was available at Bunning NZ https://haydn.co.nz/collections/extension-poles/products/professional-extension-pole?variant=35674313490587 Print with 3 perimeters…
Wydruk około 2,49 €–3,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an adaptor for the Gira E2 shallow mounting boxes, to mount regular devices on normal wall level. The shallow mount boxes (Gira 2896 00) allow devices to be installed lower than the actual wall level. Together with the special…
Wydruk około 0,41 €–0,51 € nettoWstępna wycena jednego wariantu
Small hook adaptor for Ikea(or similar) picture frames. I made this one specifically for Ribba Ikea frame and the Command 450g hook. Has a small tab to keep it on the frame while hanging it on the wall. Will update if I run into a…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
I needed a laptop stand with three slots: one for a Dell power brick, a Dell WD22TB4 docking station, and the last slot for a Dell laptop. Printed several of these for my “workstation image bench” to tidy things up and allow for more…
Wydruk około 5,93 €–7,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sign: CAUTION RAPTORS 240 mm x 200 mm x 2 mm, three colours
Wydruk około 4,32 €–5,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I had this SILVERCREST handheld vacuum pump lying around. When I bought at discount some ZWILLING 's storage containers I wanted to give this pump a new purpose. I decided to make an adaptor with a rubber o-ring to improve suction.…
Wydruk około 0,40 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It has to parts. An adapter for your Somfy remote control wich fits perfectly into a Busch Jaeger power outlet/light switch and a lid to cover it. You assamble it this way: 1: You put the adapter into the Busch Jaeger part, from behind.…
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
a funny road sign
Wydruk około 1,48 €–1,80 € nettoWstępna wycena jednego wariantu
Cooling base (wedge really) to have Dell Laptop sit at an angle so air (by convection) can flow through bottom. The wedge shape helps keep the laptop at an angle which can be used in an open position, and the small indentation near the…
Wydruk około 5,31 €–6,49 € nettoWstępna wycena jednego wariantu
Simple 2" High laptop riser for 15" laptop with wide feet to help prevent it from rocking over. Printed on Mk3 with PLA, 0.3 layer height, 4 walls, 25% cubic infill. Printed a previous version at 0.2mm but it doesn't really need that…
Wydruk około 3,90 €–4,77 € nettoWstępna wycena jednego wariantu
Double vertical stand for laptop. Thickness 34 and 29 mm. 1h39 on my Kobra 2 Neo No support needed.
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
Adaptor: garden hose (GHT/NHT 3/4-11.5) male to small shop vac female. You could use this to connect a wet vac to a garden hose. I use it with a cast-off water balloon filler as a vac attachment for small parts drawers. The kids sometime…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
This is an XT60/banana plug adapter for chargers with large charging slots (72mm), such as the SKYRC MC3000. Crocodile clips can be connected to the adapter to charge individual rechargeable batteries at their solder lugs without the need…
Wydruk około 1,02 €–1,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Laptop stand to hold the Dell Latitude 7480 (~2018) laptop vertically with the screen open 180 degrees placing the screen at a more ergonomic height (using an external keyboard & mouse). Print fit-test Take 10 minutes to download and…
Wydruk około 4,84 €–5,92 € nettoWstępna wycena jednego wariantu
Something I have wished was produced but have never found anything like it. I needed a way to neatly connect 25x16mm self adhesive trunking to a single UK pattress so I could relocate a light switch in my workshop without having to chase…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
Pressure fitted adaptor for Volvo fE central console cup holder. I drink from 0,33 (slim) and 0,25 litre cans at work, and those won't stay upright in the original cupholder, so I made adaptor for it. V1 Doesn't fit regular (fat) 0,33 or…
Wydruk około 4,79 €–5,85 € nettoWstępna wycena jednego wariantu
Made a simple hook to attached to the wall, to hang my laptop bag on after work. It is then out of the way and gives me some extra space. Made some improvements M8 screws. The screws now goes completely inside.
Wydruk około 4,29 €–5,25 € nettoWstępna wycena jednego wariantu
Threaded hose adaptor from a common shop vac hose size 1.625" (1⅝", ~41-42mm) OD to a smaller random size 1.5275" (~1 17/32", ~38.8mm). In my case, I needed to go from a smaller hose for this “Shop Nation” miter saw dust adaptor to a more…
Wydruk około 2,49 €–3,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed on a XL, but could be divided into two parts and be printed separately. I sliced it with 0.15mm. I glued the strips on the laptop with strong double sided sticker tape (for phone screens).
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Some cableclips for my bedside laptop stand. For 22mm tube and 4mm cable. See here: https://www.printables.com/model/270955-laptop-stand-height-adjustable
Wydruk około 0,24 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a friction-fit laptop stand that lifts a 14" MacBook Pro approximately 7" off the desk (the bottom of the back of the laptop is about 188mm off the desk, by my measurements). The top of the screen itself, when completely vertical,…
Wydruk około 2,47 €–3,02 € nettoWstępna wycena jednego wariantu
This is a laptop stand with the capability to be used as a book stand for textbooks.
Wydruk około 4,80 €–5,86 € nettoWstępna wycena jednego wariantu
A tablet and 2-in-1 laptop stand to elevate the device by around 8.5cm. The grooves where the device sits are made extra wide and the supports extra tall to account for said laptops. Honeycomb walls make it look pretty. No hardware for…
Wydruk około 3,41 €–4,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Laptop camera blinds This attachment hangs on your laptop screen and limits the viewing field of the 16:9 camera towards the 4:3 view. If you do not feel to share the 180° of your room during teem meetings. I've used it with HP, ThinkPad…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Lets face it, adaptors for telescope mounts and tripods are expensive. I created the first version of this in PLA over 8 years ago and it served me well. I decided to replace the first version with this new 2.1 version for a couple of…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacing pat for Korum Speed fit tripod adaptor Speedfit Tripod Adaptor . Printed from PETG and reused original screw from broken parts.
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A remix of the original with support for fixing the stands to a wood desk using 5mm screws sat flush diagonally.
Wydruk około 3,51 €–4,29 € nettoWstępna wycena jednego wariantu
This is a Holder for the Sonoff Zigbee 3.0 Dongle Plus that sits on a PC Laptop screen. Designed so you don't break the USB connector when using the Sonoff Zigbee 3.0 Dongle Plus with WiFi Explorer Pro. (this one is for a thicker screen)…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Alternative Quick release adaptor for Korum system
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a Holder for the NetAlly NXT 2000 Spectrum Analyser that sits on a PC Laptop screen. Designed so you don't break the USB connector when using the NXT2000 with WiFi Explorer Pro. (this one is for a thicker screen) Will print…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
![Minimal Stand's Divider [Add-On] - Tablet, Laptop, Books and Anything In-between.](https://media.printables.com/media/prints/1108868/images/8378877_56cbc877-f33b-4c54-9190-9f20b125a5dc_f708f62b-26d7-4a66-a02a-6a56b3b9d8ee/divider-render.png)
