1154 modeli
This model was designed first and foremost around play, which means it must be seaworthy. One of my other models, the anchor handling tug is a great play toy, but required some specific balance to make the ship seaworthy. This tugboat on…
Wydruk około 0,87 €–1,07 € nettoWstępna wycena jednego wariantu
printed in PETG 0.3MM layer height
Wydruk około 1,92 €–2,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
***DESIGN UPDATED & IMPROVED 5/2/2022*** Needs strong magnets with dimensions - 1.26 inch [32mm] x 0.08 inch [2.03mm] Two stacked magnets (x2) needed for magnet bar (green in photo) that sits outside habitat. Two stacked magnet (x2)…
Wydruk około 5,06 €–6,19 € nettoWstępna wycena jednego wariantu
This is a large bin for Harbor Freight Store House 20 Bin Portable Parts Storage Cases, Item # 93928 and probably others. It can also be used standalone. I used Tinkercad's rounded cubes to make it. It has no feet, reducing print material…
Wydruk około 3,49 €–4,26 € nettoWstępna wycena jednego wariantu
I had a cheap (7.49) set of Harbor freight Titanium Hex Shank Drill Bit Set, 13 Pc. lying in the bottom of my tool box and decided the only way I was ever going to use them is if they where organized and in a case. So I got out the…
Wydruk około 1,47 €–1,80 € nettoWstępna wycena jednego wariantu
I purchased a new USGeneral (Harbor Freight) Series 3 42" toolbox (top and bottom). The top toolbox has wide drawers on the left, and narrow drawers on the right. This model is for a Gridfinity base that fits perfectly inside the narrow…
Wydruk około 0,73 €–0,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small plate to close the arbor hole on the Festool TS60
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a model of the Harbor of the town of Bonesborough from the show The Owl House. It consists of a pier, 9 buildings and a wall. Some pictures show this model alongside the Selkidamus Ship . Dimensions Width Length Height 178mm 180mm…
Wydruk około 9,62 €–11,75 € nettoWstępna wycena jednego wariantu
These handles help you grip the arbor wrenches better and also protect your hands and the teeth of the blades. When you loosen the arbor nut a lot of the time it gives way suddenly and then the wrenches fly. This last time one wrench…
Wydruk około 2,12 €–2,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tool to tighten/loosen ring securing cartridge in a Moen Sense faucet. Mine kept loosening up and I was trying to turn in the ring with a screwdriver which didn't work so well so I designed this. Hope it helps. Hex grip for hand…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 15+ Supports: No Print Orientation: Default
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
Here are a set of files I made to bring Gridfinity to the new Harbor Freight US General Mini Toolboxes! There are 3 grid base files that will allow you to add your own gridfinity organization to your mini toolboxes you can also split the…
Holders for the sockets, torx, allens, extensions, and adapters
30% less material, 30% more space. If you use these custom grids with the custom bins I have modified you will get maximum storage space out of your mini toolbox. Bins for top and middle drawer are 20mm in height. The bins for the bottom…
Lowe's Solar Flood Light Mesh Node Bracket System Lowe's Harbor Breeze Solar Light (Item #1234868 | Model #ZDL1362): https://www.lowes.com/pd/Harbor-Breeze-60-Lumens-1-Watt-Black-Warm-White-Solar-LED-Spot-light/5018244381 This is a custom…
As a lover of this “DIY Sortimo” System, I wanted to make some bins that were easy/quick to print and could function for both larger and smaller parts. These boxes improve the utility and capacity of the standard harbor freight boxes.…
I re-modeled this with the exact dimensions from charlescho's design, except I reduced the height by 10mm.
1.1 replica of Scarborough fair from Bayonetta features of the model include an opening barrel as well as a lipstick bullet :) file contains all the parts to build each of the 4 weapons :) wanna see what is im working on next? have a look…
UPDATE 2025-11-25 v14: BETA TEST Major math calculation changes to ensure magnets never cut into text. Test with care, report bugs please. I have left v12 available for now. Introduction This is a magnetic label generator that I use to…
Please upload makes - it's how I afford my filament and improve my design! This Dust Cover is designed to fit the new Milwuakee M18 Fuel Track Saw and prevent dust blowing out of the arbor port. I designed it to use the saws own allen key…
v3.1 update, 11-April-2024: Finally got to borrow a Bauer 20V battery to take measurements from, and have revamped the design for best fit. Earlier iterations were functional, but this now fits all the Bauer tools I have to test with just…
SubBoxes for the Harbor Freight container boxes. I love the harbor freight storage system, however I want less large boxes and more smaller boxes. I also wish they had a handle and place to put a label. Because the boxes have feet, it…
I really liked the 20 bin parts storage case from harbor freight, but I was really unhappy that there didn't seem to be a way that I could purchase more of the different sized organizers to make things more customizeable. Each of these…
Edit : I've upload a new version of my drawer - please see version 3 3mf for an easier time! This is the new layout: Original I've finally sat down and documented my way of implementing Gridfinity Refined baseplates in the Harbor Freight…
These baseplates fit the Harbor Freight medium sized small-parts organizer ( this one ). I included two variants, the minimal baseplate and the skeletonized version with magnets. The magnet holes are sized for press-fit without needing…
I think this is the best 'sortimo-like' storage rack available on the internet. It will fit 24 medium and 6 larger harbor freight storage cases. It's easy to build and very functional. The idea is directly to mount the storage case on the…
These will hold your Harbor Freight Mini Hook and Pick Set.
Needed a tray to store my HF impact sockets and decided to just print one. I had to split the model in two parts to print, but decided to include the whole model as well.
The STL / STEP files included are specific to the harbor freight socket sets 69344 (SAE) and 69346 (metric) , they may fit yours but I recommend downloading the parametric file and customizing the parameters to fit your sockets perfectly.…
These replacement bins fit the Harbor Freight 20-bin storage case SKU 93928, 62778. I wanted more of the smaller bins that come with the case, so made these drop-in replacements. The original bins have small 3mm feet on each corner that…
Just a simple snap into place knob that allows you to more precisely, and better control, your pressure release by hand. (replaces the need to use the lever) Note: Tolerances were designed around the use of ABS filament with a .4mm…
The cheap molded case that comes with these wrenches was way too big and bulky, so I made my own! I've caught the gridfinity bug, so I naturally made a version to be compatible with it. I use the 3x5 version, but I also uploaded a 4x5,…
Remix from: https://www.thingiverse.com/thing:5513241 Added legs for stability when laying down on its back. UPDATE: I've made a pegboard cradle for use with this model. See it at:…
A simplified but yet complete, reverse-engineered (to my best ability) U.S. General Mini Toolbox that can be used for reference and designs. All dimensions are taken from a physical mini toolbox and may be accurate within 0.05mm…
This is a re-mix of the Harbor Freight Glove Holder by Makerneer. This version is now mountable to metal toolboxes with magnets. Simply superglue 6x3 mm magnets to the holes on the back. I found that 7 was a good number, but it has room…
This is a very simple and easy to print (no supports) additional bit holder for the Icon Mini Flex Head Ratchet set from Harbor Freight. This was designed to hold any standard sized bit, but I made this specifically for Magnetic Nut…
I needed a simple holder for the step bits, and this is it. Works with the Harbor Freight / Warrior three piece set (https://www.harborfreight.com/3-piece-titanium-nitride-coated-high-speed-steel-step-drills-91616.html). Print it however…
I grew tired of having my wobble sockets roll around in my tool box, so I created a 3x6 gridfinity tray to keep them in place. The tray is tall enough to keep pieces securely in place on a tool cart, but shallow enough to fit in the 35mm…
Holders for the Icon t handle allen wrench sets
These are my various modifications to the Harbor Freight Sand Blasting Cabinet (SKUs 68893, 93608, 62144, 39170). My goal was to make as many of the modifications as possible to be 3D printed parts. Note that in addition to the .STL…
Continuing with the never ending battle to organize my shop, my disposable gloves need a home. But the Harbor Freight glove box doesn't fit very well into the Harbor Freight glove dispenser... Go team... Problem solved. This glove holder…
Background The natural state of every garage or shop is disorder and its a constant and never ending battle keep some semblance of order. A good organization system helps with that. As a maker I also found myself buying lots of assorted…
A 3×1 Gridfinity tool holder for PITTSBURGH 3/8 in. Drive Metric Crowfoot Wrench Set, 7 Piece . The craftsmanship on these is really poor, and the “base” of each of them varies pretty heavily, so I left the tolerances very loose. You may…
Hello I created these models to store my 32 Piece Harbor Freight Pittsburgh wrench set found here. https://www.harborfreight.com/fully-polished-sae-metric-combination-wrench-set-32-piece-68854.html It is designed to print out 2 of each…
Static model for use on 1/10 scale RC vehicles. Is hollow so you could put objects inside if you wanted but it does not hinge open. Prints in 3 pieces (open/flat side down) to be glued together with superglue.
This is a print in place model designed to print face up at 0.2mm, 15% infil using the designated supports. I've used PLA and ASA and both worked great. I designed this based on designs I tried from here that either fell out, rubbed on…
V1. - 08/23/2023 - Rails to print that allow you to fit a Harbor Freight Storage Parts Case into an Ikea Trofast. 2 different size rails, one for left and one for right. I used ½" pan head screws to screw into the side. Just start…
This baseplate fits the Harbor Freight medium sized small-parts organizer ( this one ). I took the original one piece model and cut it into 5 pieces to fit on the Bambu build plate. The placement/orientation is as follows:…
Two versions included, one with a closed bottom and one with an open bottom (shell). I like the shell, printed face down. Made for Harbor Freight Pittsburgh Wobble Socket Extension Set . I taped off the top and then spray painted the…
7 different versions of small parts bins for the famed Harbor Freight portable parts storage cases (#93928). These portable cases are the best you can buy for the money right now compared to the much more expensive Sortimo cases and…
This is a tray designed for Harbor Freight's US General mini toolbox. It fits in the uppermost compartment, under the lid. It is designed for the Quinn ¼" Master Socket Set. The tray holds only the sockets and ratchet. The 3" and 6"…
A custom stackable solution to store many small parts in a Harbor Freight Storehouse 20-Bin Medium Portable Parts Storage Case. There are two trays that stack together. I designed these specifically to fit in the upper left-hand corner of…
Uses the 60LM Harbor Breeze solar light as a base. and passes the antenna pigtail through the existing holes in the panel case. Make sure to waterproof the cable hole after passing through the antenna wire.…
If you like this model and it's not too much trouble, please hit the ❤ button - it helps out a lot 😀 These are insert bins for the Harbor Freight 20-bin Medium Portable Parts Storage Case . I created a bunch of boxes using spuder's…
Organizer / holder for 5 Piece 3/8 Drive Socket Extension Set Harbor Freight 67926 In my quest for Toolbox organization, my socket extensions were next. I designed this tray to hold the Harbor Freight 67926 3/8 drive impact extension set…
These bins increase the amount of storage compartments in the Harbor Freight Bauer Modular Storage System. The storage box only comes with 12 rather large bins, and putting a small quantity of small hardware seemed like a waste. These…
Edit: Added full basket 9/9/2020 lhas not been printed, drop me a message if it's good. I goofed up my parts basket so I made a new one for my Harbor Freight Ultrasonic Cleaner. Part shown in use about 18:00 into the video. Fusion360…
Changed the Lettering to fit the SAE set of Harbor Freight impact sockets. (Note: In the picture of the tray I printed, I had not put bold letters on the sizes. It now has bold letters and should match the original tray a bit better.)
Hello fellow makers! This model is inspired by @Granite_619387 Apache 1800 box found here: https://www.printables.com/model/477096-harbor-freight-apache-1800-box-divider-organizer I created it from scratch because I wanted a similar…
Hack of the original to use on a Harbor Freight pole. The hose clamp wall is very thin and doesn't print well.
Printed Knob for Harbor Freight 20 Ton Press. Print at high fill density. I'd recommend printing out of ABS, ASA, PETG, or similarly strong material, but honestly I printed mine out of PLA+ and it's just fine. Should be a slight snap fit,…
Tray fits with a flat indicator back (no lug). Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC
Holder for Harbor Freight PITTSBURGH Universal Joint Socket Adapter 3-Piece Set After printing an organizer for my Harbor Freight socket adapter set, I decided to design this one next. Piece by piece I will be designing organizers for my…
Harbor Freight appears to have changed the dimensions of their toolbox. I bought a new one 6/15/25 and the drawer inserts don't fit. Use the top drawer from the original as the bottom drawer on the new version and use this as the new top…
Insert for Milwaukee Packout 48-22-8435 Recommend printing in red ASA or other robust plastic, I used 0.2mm layer height with 3 wall loops, alternate extra wall, 7% honeycomb infill. I had to slice it to fit on my Bambu X1C 256mm print…
Fits these well: https://www.harborfreight.com/hand-tools/specialty-hand-tools/picks-hooks-tweezers-probes/pick-sets/mini-pick-and-hook-set-63697.html https://www.amazon.com/4-PC-PICK-HOOK-SET/dp/B00AOGGEYG/
Use these clips to get rid of the annoying rattle on the Harbor Freight Cabinet Doors. Just pop them on to secure the locking rods in place, and prevent them from rattling. This fits the U.S. GENERAL 22 in. End Locker, Series 3.
Just made this in case you want to replace the logo on your box with one that matches your box better I drew the logo from scratch doing my best to make it exactly like the original one so it's possible it's not 100%
Holder for 8 piece, Pittsburgh punch set from Harbor Freight.
Snap in jaw covers for the Harbor Freight Central Forge 4" bench vice. Protective your work without the metal jaws marring the surface of plastic or other soft work materials. Comes in several variants with either large grooves, a…
Welcome to the PHFSCB (Pee-Fisch-Bee) solution! This collection of storage bins were designed from the start to be parametric and I will be actively monitoring this model to see what types the community needs. I have published the most…
I found a number of parts bins for the Harbor Freight Storehouse Parts Storage Case but I didn't like the feet and I wanted them with a label ledge and dividers. So taking inspiration from GridFinity and wanting to learn Fusion360 (trying…
You will need some longer 3mm x 20mm length screws to make this work. The original screws are Torx T10 security heads. Luckily Harbor Freight sells a set of security bits needed to remove them.
Just picked a couple of these up and knew that they needed inserts. All are half the height of the respective drawers and have a 0.2 margin. The middle drawer rear tray is notched for the magnet rivet. The lower rear tray is below the…
Harbor freight boxes with divider. License follows original box design. As seen in the video below: Jeremy Cook on Substack: https://www.techadjacent.io/
The old holder finally broke on me, so I designed a new one that snaps on, is print in place, and rotates so I can't break it again...lol I made this out of Prusament PETG for the flexibility. PLA may work, but I didn't try it. PETG seems…
I've got the 10pc diamond needle file set from Harbor Freight, and it comes in a cheap little plastic holder which works, but isn't great. I decided to get a little fancy and print up a holder, and then got even fancier and designed it to…
So! There are many of these on here but I think mine is pretty great. I used some images of screen used connectors and some dimensions pulled from another connector to make this abomination. The other connector used small magnets that…
These baseplates fit the Harbor Freight large sized small-parts organizer ( this one ). I included two variants, the minimal baseplate and the skeletonized version with magnets. The magnet holes are sized for press-fit without needing…
This is a Gridfinity 3X2 Step Drill holder that holds 3 bits. This holder is designed to fit the Imperial Step Drills from Harbor Freight SKU's (91616, 69087, 60379). The base of this model has the standard magnet pattern on the base…
First, the original I modified is a very beautiful structure. Please check it out. I've bought battery backup bulbs before and when the power went out, they were not very bright. I made this for any power outage and with several batteries…
For use with Harbor Freight's Mini Pick & Hook 4pc Set . Use with 1" spacing pegboard.
Desktop rack for Precision Pliers Set https://www.harborfreight.com/hand-tools/pliers/plier-sets/6-piece-mini-pliers-set-94931.html
Adapter to allow the end of the Starlink Dish to be mounted into the end of the Harbor Freight 20 foot flag pole. You will need to remove the plastic cap on top of the pole in order to slide the adapter in place. When I built mine it was…
These are bins that fit the Harbor Freight 20 bin portable storage case. I did not design the small foot, as the bins that come with it have. They don't really work anyway, seemed kinda useless. I'm sure I'll be designing more variations…
You've see oikos's table saw for a real dremel ( https://www.thingiverse.com/thing:670704 ), but now theres a version for the cheap-o $10 Harbor Freight one! I saw oikos's version and thought, man it'd be cool if I had one of those for my…
Designed to be refillable with the super glue gel tubes from harbor freight. I found the best print orientation to be as pictured above. Lay the squeezer on its side and sink it into the build plate 9mm (Thickness is 18mm) then glue the…
These are for mounting Harbor Freight Stanley Style Storage Bins to side mount drawer slides for an Ikea Lego Storage System. For medium and large cases. Right side, mirror for left side. Storage Bins from Harbor Freight: 8 Bin Large…
Recently purchased a ts60 and found that the arbor hole was a different dimension to the usual ts55 had a look on the usual susect sites for a file to print but could only find paid versions so knocked up my own on onshape and here it is…
I have designed harbors for the 3d Settlers of Catan game that fit into the shapes of the border.
Exact same but only added magnet holes on the bottom of the design!
It's recommended to use a resin printer for this model, although it can be printed with a fine-tuned FDM machine as well. It can be painted, and the wheelhouse can be glued in place or left removable and used to store small things.
Printed using .2 layer height 30%infill
Remix of DustBunny67's clamp pads. models from scratch ( Fusion 360 files attached) . The original Pads had slightly different slots so the Outer pads did not fit the Aldi clamps I had. I have made them match and beefed up the tips. Print…
If you like this model and it's not too much trouble, please hit the ❤ button - it helps out a lot 😀 These are insert bins for the Harbor Freight 20-bin Medium Portable Parts Storage Case . I created a few boxes using spuder's parametric…
I needed a storage system for my woodworking clamps. I had a variety and there wasn't anything I could find that was what I was looking for so I designed my own. I made them out of carbon fiber PLA for stiffness. There are different…
The spacing between the snapping tabs were increased by .7mm. Now it fits perfectly. I also changed the orientation so the front faces down on the print bed.
A 3D printable tray to hold Pittsburgh Tool (Harbor Freight) SKU: 67914, 91238. Tray features individually sized pockets, and places to embed magnets to keep sockets in their place. Print instructions If using the gcode provided, the…
This allows you to remove the 2 to 1 hose adapter and use a single 4" hose. It has a single hole for the original screw that is used to hold the original adapter in place. I used some thin foam insulation tape to help make the connection…
Grain Tiles Rows are created for each tile, making it look more like grain fields. instead of 1 block. I placed additional objects on two grain tiles. For example, I removed some grain from 1 tile and replaced it with 3 grain silos and a…
