Wyniki wyszukiwania: armattan

Sortowanie

119 modeli

P
PrintablesBddha

Armattan Marmotte DJI O3 Mount

There are 2 parts to mount the DJI O3 Air Unit (O3 Mount Bottom & O3 Mount Top). Those are stacked on each other with the Air Unit in between (like a sandwich :D). The cables to connect the Air Unit to the flight controller are laying…

Pobrania
278
Polubienia
8
Ocena
5
P
PrintablesFilip Radelic

DJI O3 Air Unit Camera mount for Armattan Badger or Marmotte

Also works for the original DJI FPV System camera using the standard 2 mounting holes on each side. Front holes are for mounting O3 Cam, they'll push it all the way to the front, almost touching the titanium cage but getting 99.99% of it…

Pobrania
270
Polubienia
16
Ocena
5
P
PrintablesFilip Radelic

DJI O3 Air Unit antenna mount for Armattan Badger or Marmotte

I recommend removing antenna tube to keep some flex in the mount. Cap should be held in tightly enough using friction not to pop out and pull the cables out (thanks SyncFPV for help with this design), but I haven't been using it too long…

Pobrania
140
Polubienia
6
Ocena
0

Armattan Marmotte / Badger DJI, GPS & GoPro Parts

I made 2 mounts, one for GoPro Session 5 and and one for GoPro Hero 8, for my Armattan Marmotte ( https://rotorbuilds.com/build/26420 ) - they should also fit for the Armattan Badger. Further I made a remix of the great "Armattan…

Pobrania
130
Polubienia
2
Ocena
0
P
PrintablesBddha

Armattan Badger DJI O3 Mount

Thanks to @Evel-Knievel I was able to create this remix. Please see the description and print the parts from Armattan Marmotte DJI O3 Mount , but replace “O3 Mount Bottom.stl” with “O3 Mount Bottom Badger .stl” from this remix.

Pobrania
108
Polubienia
7
Ocena
4
P
PrintablesRemooz4

Armattan Beaver Insta360 One RS Mount

Armattan Beaver mount for an Insta360 One RS. Mount can be used for typical GoPro mounting as well. Printed in 95A TPU.

Pobrania
78
Polubienia
4
Ocena
0
P
PrintablesFoC_Tow

Armattan Gecko Parts

The parts have been created over the course of multiple Gecko builds, and are designed to be extremely lightweight while still providing maximum protection. I've flown, crashed and abused these quite a lot, and never managed to break the…

Pobrania
77
Polubienia
5
Ocena
5
P
Printablesaudries

Armattan Marmotte/Badger DJI O3 / Caddx Vista antenna mount/ TBS Crossfire / GPS BN-220 BN180

Pulled out the antenna and fold it for better storage. Use 2 zip ties through the hole (1mm) and secure the tbs crossfire antenna

Pobrania
69
Polubienia
6
Ocena
0
P
PrintablesKrhom

Armattan Tadpole DJI O4 Camera Mount

Side Clamp camera mounting solution. Not super elegant but very solid! 25 degrees camera angle.

Pobrania
68
Polubienia
7
Ocena
5
P
Printables3DPrintSOS

Armattan Odonata TPU Bumper & Motor Guards

I made these for my Odonata because it was taking a bit of a beating. I think these will save you a frame in some crashes. The motor guards should print with no supports. Just duplicate and flip in the slicer.

Pobrania
62
Polubienia
8
Ocena
5
P
PrintablesFilip Radelic

DJI Action 2 mount for Armattan Badger or Marmotte

Fits both TBS Glass ND Filters and Camera Butter Black Diamond Universal ND Filters (you slide them in from inside before installing the camera itself). Has holes on the back to quickly peek at settings/recording status without taking the…

Pobrania
60
Polubienia
1
Ocena
0
P
Printables3DPrintSOS

Armattan Odonata TPU Battery Mount

This is a slip on battery holder for 1S batteries ranging between 420 and 550Mah. It may fit other batteries, but those are what I had on hand. It is designed to be printed in TPU and should “pop” into place on the top mount of the frame…

Pobrania
59
Polubienia
8
Ocena
0
P
Printablesclaybrain

Walksnail VTX Antenna Mount for Armattan Gecko 3"

Printed with PETG at .20 No supports required The diameter of the tube is just barely large enough to fit the end of the U.FL connector. If you have any strings from printing make sure to bore out the antenna tube first

Pobrania
59
Polubienia
3
Ocena
0
P
Printablesmuchzill4

Armattan Tadpole FPV Antenna Mount

Depending on how much antenna sticks out you can cut it to length. Works well with TBS Triumph when VTX is at the back. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 100 Filament: SainSmart TPU…

Pobrania
56
Polubienia
7
Ocena
0
P
Printablesclypp

Armattan Chameleon Ti/Rooster/Marmotte/Badger - Arm protector with feet

Landing feet has a 10mm clearance from the ground.

Pobrania
54
Polubienia
8
Ocena
0
P
Printablesdarken

Armattan Marmotte BN-880 GPS Holder

Mounts a BN-880 GPS ontop of the camera cage of an Armattan Marmotte & Badger. Category: R/C Vehicles

Pobrania
53
Polubienia
2
Ocena
5
P
Printablesquadwolf

Arm Guards Skids Combo Armattan Marmotte Badger

Arm Guard Skids Combo for the Armattan Mamotte and Badger Frame. Printed with TPU. Category: R/C Vehicles

Pobrania
51
Polubienia
0
Ocena
0
P
Printablesaudries

Armattan Marmotte/Badger GoPro/ OSMO Action mount

This is the final version of my making. it grabs onto the frame, so it is pretty sturdy PLZ Print as it with support is for maximum strength.

Pobrania
50
Polubienia
8
Ocena
5
P
PrintablesMange Dilltoast

Armattan Marmotte mount: Gopro Session + TBS ND filter

INFO: A mount for a gopro session and TBS ND filters for the marmotte frame. My design goals: +No loose parts. +No straps. +Secure camera and filter. This resulted in the back-loaded design. First pop in your filter, then the camera.…

Pobrania
48
Polubienia
1
Ocena
0
P
Printableskumquad

3D-Files for Armattan Beaver

This is a reupload from thingiverse for the default Armattan Beaver files. Printing tipps: Print all of the antenna mounts on their flat back. The bumper will require two pieces and one to be mirrored.

Pobrania
47
Polubienia
1
Ocena
0
P
PrintablesOptikool

Armattan Beaver Arm Guard

Arm guards for the Armattan Beaver

Pobrania
46
Polubienia
10
Ocena
0
P
Printablesjtuckwitz

Armattan Badger / Marmotte Vertical GoPro Mount - Hero 9, Hero 10, Hero 11

Vertical Go Pro mount for hero 9, 10, & 11. Mounts to Armattan Badger / Marmotte frames Print at 100% infill in TPU. Removed standard GoPro mounting points and fitted with ones compatable with the quad frame.

Pobrania
44
Polubienia
4
Ocena
0
P
PrintablesBatcaveFPV

Armattan Beaver Skid Guards

Armattan beaver skid guards. Based off the Impulse RC ones, but redesigned to fit this frame. Put 2 version, flat and covering the arm ends. Most skid guards have material inbetween all motor screws, I don't like this. For these mounts 2…

Pobrania
43
Polubienia
1
Ocena
0
P
Printablesmuchzill4

Armattan Tadpole Immortal T Mount

Antenna mount for full size Immortal T Mirror the second print. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 100 Filament: SainSmart TPU Category: Other

Pobrania
42
Polubienia
3
Ocena
5
P
PrintablesNöxNöw

Armattan Rooster Chameleon FPV Camera Mount

Conversion brackets to allow mini foxeer FPV cameras to fit into titanium cage. This bracket allows a greater FPV camera range (as low as 20 degrees) Category: Hobby

Pobrania
40
Polubienia
3
Ocena
0
P
PrintablesJan Pichrt

Armattan Marmotte Immortal mount

Simple holder of Crossfire Immortal antenna for Armattan Marmotte frame. Print instructions Category: R/C Vehicles Summary Simple holder of Crossfire Immortal antenna for Armattan Marmotte frame.

Pobrania
39
Polubienia
0
Ocena
0
P
PrintablesBddha

Armattan Marmotte - RunCam Thumb Pro

Because I couldn't find one, I created my own. The additional hole, is meant to be used for the cables coming from the FC, 5V regulator or anything else. Print it with TPU and with the right site on the plate.

Pobrania
38
Polubienia
2
Ocena
5
P
PrintablesFilip Radelic

TBS M8 GPS mount for Armattan Badger or Marmotte

I wanted to mount my GPS module a bit behind the carbon and other electronics so I designed this to be an easy print - oriented like it is in STL it needs very minimal supports. 3MF for the Prusa Mini included is exactly how I printed…

Pobrania
36
Polubienia
1
Ocena
0
P
Printablesgomaed

Armattan Marmotte DJI Parts

New Parts for the DJI conversion of my trusty Armattan Marmotte. All TPU Category: R/C Vehicles

Pobrania
36
Polubienia
2
Ocena
0
P
PrintablesFasaArg

Armattan Chameleon TI / Marmotte - Motor protection V1

2019-03-22 : Special thanks to Vaughn Dickson for trying this protectors with the Armattan Marmotte. Not much to say, the same proved protector updated for the newer version of the Armattan frame. OG Chameleon:…

Pobrania
34
Polubienia
1
Ocena
0
P
PrintablesOptikool

Armattan Beaver SMA Immortal T Holder

SMA and Immortal T / ExpressLRS holder for the Armattan Beaver.

Pobrania
34
Polubienia
1
Ocena
0
P
PrintablesRussell Smyth

Walksnail v2 Stock Antenna mount for Armattan Chameleon TI

Simple tail mount for Walksnail V2 Stock antenna on an armattan Chameleon or Chameleon TI Category: R/C Vehicles

Pobrania
34
Polubienia
3
Ocena
0
P
PrintablesOptikool

Armattan Beaver Camera Base Holder

I created this design for the Armattan Beaver. The mount will hold a Naked GoPro, or GoPro wrapped in a holder with a 5mm screw hole.

Pobrania
33
Polubienia
2
Ocena
0
P
PrintablesNico Als

Armattan Beaver Gopro Vista and Backpack

Gopro Hero 9 / 10 / 11 case for Armattan Beaver Caddx Vista deport of 8mm + 470uf capacitor right or left version Backpack with GPS BN220 Crossfire antena and pigtail

Pobrania
32
Polubienia
5
Ocena
4
P
PrintablesAndrás Bognár

Ultimate Armattan Rooster Collection (R-XSR, TBS Crossfire nano, AKK X2 Ultimate, RDQ Mach 2, GoPro Session, LED strip, Antenna)

My Armattan setup, designed, printed, tested, redesigned and tested several times :) The R-XSR Mount is a remix of another design, with some modifications to fit the other parts I designed. It is in final, printed with PLA, no support,…

Pobrania
30
Polubienia
2
Ocena
0
P
PrintablesJustinL42

*Updated* Armattan Badger/Marmotte Dji Antenna Holder with Immortal T Mount

I remixed this from two designs on Thingiverse. It combines the side by side antenna design of Onderko123 and the Immortal T Mount from Swivaljaw's design. **I have added two more design variations on this mount. The swiss cheese one is…

Pobrania
30
Polubienia
2
Ocena
0
P
Printablesnouc

Armattan Beaver Cage slider

I suggest print on side with supports and brim

Pobrania
30
Polubienia
1
Ocena
0
P
PrintablesQrome

Armattan Chameleon ESC Cover and Bottom Pad

Finally scrapped off the landing pads off the bottom of the arms and designed these up to keep the motor screws off the cement and so on. These are a one piece wrap around the arm and ECS cover and landing pads for the arms of the…

Pobrania
29
Polubienia
3
Ocena
0
P
PrintablesChris Loving

Armattan Badger arm protection

Protection for you arms

Pobrania
28
Polubienia
0
Ocena
0
P
PrintablesBatcaveFPV

Armattan Beaver GoPro 9 and 10 mount. 25 30 35 degrees

Armattan Beaver GoPro mount. Fits both the GoPro 9 and 10. There are a few adjustable mounts out there for this frame, however I personally do not like this kind of mount. Put 3 degrees variations here: 25, 30, 35. Can make more if…

Pobrania
28
Polubienia
2
Ocena
0
P
PrintablesJazzXP

Armattan Marmotte Antenna Mount

Just a small mount for an Armattan Marmotte (and possibly Badger) for when using a stubby antenna to move it out from the aluminium standoffs for better signal. While there are no holes for it, a TBS style SMA connector fits well or a…

Pobrania
28
Polubienia
1
Ocena
5
P
PrintablesVachy

Armattan Badger/Marmotte 3in1

To use with armattan frames.. Armattan Badger include 3in1 (gps 18x18/ sma/ T antenna). Print in tpu 20-30 %

Pobrania
28
Polubienia
1
Ocena
0
P
PrintablesRainer

Armattan Chameleon 22-23xx slide on Motor protector

A motor protector for the Armattan Chameleon Frame. It can be easily mounted and secured with just one small zip tie. No need for hotglue or similar. It widens above the frame to allow enough space for bigger motors The top parts of the…

Pobrania
28
Polubienia
1
Ocena
0
P
Printablesmuchzill4

Immortal T Armattan Tadpole Mount

Updated design: https://www.thingiverse.com/thing:4910295 Mount for the big boy CRSF antenna, works with Armattan Tadpole. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 25%…

Pobrania
26
Polubienia
0
Ocena
0
P
PrintablesMacNeill

Armattan Gecko 4 ExpressLRS Antenna Mount

Didn't had much time so I've not tested it, yet. But it should work. ;) Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 mm Infill: 20% Filament: 3DWarHorse TPU

Pobrania
26
Polubienia
0
Ocena
0
P
Printablesclypp

Armattan Marmotte - TBS Unify Pro board mount

Required Materials 2 x 2.5mm Nylon Cable Ties

Pobrania
26
Polubienia
1
Ocena
0
P

Crossfire Rx support / holder for Armattan Rooster

I was tired of seeing crossfire rx supports that require you to remove the small carbon square to be positioned between the two arms. That small square is used to protect the screws and the arms themselves from possible crashes,…

Pobrania
26
Polubienia
1
Ocena
0
P
PrintablesBacon2002

Armattan Tadpole - HDZero

Armattan Tadpole parts Part 1 - 25.5 x 25.5 stack top Designed to fit HDZero - whoop board With mounting space for Happymodel ELRS - PP / EP2 Material - ABS V1 is the same as V2 other than enabling the HDZero board to fitter at 90 degrees…

Pobrania
25
Polubienia
5
Ocena
0
P
PrintablesJuanOnJuan

Armattan badger HD stack guard

My flight controller and ESC were getting very dirty at my usual flying spot. This cover protects the stack from both sides and attaches cleanly with skinny cable ties, also has openings for motor wires. Prints best in a flexible filament…

Pobrania
25
Polubienia
2
Ocena
0
P
Printablesclypp

Armattan Marmotte - Female SMA mount

The mount press fits between the rear aluminum standoffs to hold it in place. Required Materials 2 x M3x4mm Button Head Screws

Pobrania
25
Polubienia
0
Ocena
0
P
PrintablesKrhom

Armattan Tadpole Snap-On Arm Protection

Print in TPU with 0.2 layer height. I used regular supports, snug, rectilinear base pattern.

Pobrania
25
Polubienia
5
Ocena
0
P
PrintablesNick Cent

Armattan Rooster - Camera plate

You might need it, if you own the Rooster frame. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 Infill: 50 Filament: Prusa PET Orange Notes: easy printrnrn Category: R/C Vehicles

Pobrania
24
Polubienia
1
Ocena
0
P
PrintablesHughie10

GoPro Hero 10 mount for Armattan Rooster and Chameleon TI (plus remixable files for other frames)

GoPro Hero 10 mount for Armattan Rooster and Chameleon TI. There are additionally STL files that have no curves for easy modification with programs such as SketchUp (which it was designed on) and files that have no base mount for remixes…

Pobrania
24
Polubienia
1
Ocena
0
P
PrintablesFasaArg

Armattan Chameleon XT60 rear holder

Update V2: Slightly modified to be easier to print by aligning side walls against the print bed. Wedges added to facilitate aligning the two halves before adding the zip ties. Printed with support. Note that it might require a little…

Pobrania
24
Polubienia
3
Ocena
0
P
PrintablesPortalFPV

Armattan Badger arm protector

Arm protector for the Badger. Has a locking tab for using a ziptie to secure to the arm Made to work with my skids and racewire protector that share one ziptie Category: R/C Vehicles

Pobrania
24
Polubienia
0
Ocena
0
P
PrintablesTrajan

Armattan Tadpole Insta360 Mount Base-Plate

I wanted a solid mount for my Insta360 Go 2. The base screws into the existing front cage mounting bolts and takes a small zip tie in the front to fully secure it down. The bolt hole is for a standard m2 screw and the nut should recess in…

Pobrania
24
Polubienia
6
Ocena
0
P
Printablesquadwolf

Armattan Marmotte Badger GoPro Hero9 Mount Full

My GoPro Hero9 / Hero 9 Mount for the Armattan Marmotte or Badger. Let me know what you think. This ist the full protection version. I've uploaded also a light version. Category: R/C Vehicles

Pobrania
23
Polubienia
0
Ocena
0
P
PrintablesFasaArg

Armattan Chameleon - Motor protection V6 (Work in progress)

This continues the work from the version 5: https://www.thingiverse.com/thing:2747220 Armattan Chameleon TI version: https://www.thingiverse.com/thing:3115041 V6 updates: Perfect fit, no sanding or filing required. Lowered wall (2mm),…

Pobrania
22
Polubienia
0
Ocena
0
P
PrintablesOptikool

Armattan Beaver Prop Strike Guards

Prop Strike Guards for Armattan Beaver.

Pobrania
22
Polubienia
2
Ocena
0
P
Printableseyefly

Armattan Marmotte DJI HD / Vista camera mount

Hi there! As i tried mounting the Caddx Vista-camera (identical to the one from the original DJI HD combo), i realized i would need to have some kind of spacers. Also i wasn't too fond of the little arms to hold the camera. Couldn't find…

Pobrania
22
Polubienia
1
Ocena
0
P
PrintablesOptikool

Armattan Beaver Landing Skids

Landing skids for the Armattan Beaver.

Pobrania
21
Polubienia
3
Ocena
0
P
PrintablesProxFPV

Armattan Badger Caddx Nebula Pro Holder

This is a Nebula Pro (19mm camera compatible) mount/adapter because Armattan Badger is designed for 23mm cameras. It is pushed as forward as possible but still protected by the cage. Cage is minimally visible (in 16:9).

Pobrania
21
Polubienia
3
Ocena
0
P
Printablesquadwolf

Armattan Marmotte Badger GoPro Hero9 Mount Light

My light version of the GoPro Hero9 / Hero 9 Mount for the Armattan Marmotte or Badger. Works for me. Let me know what you think. I've uploaded also a full protection version. Category: R/C Vehicles

Pobrania
21
Polubienia
0
Ocena
0
P
Printablesnouc

Armattan Beaver arm protector

Designed to be printed from hard material, ASA, PET, etc Parts are interlocking each other during assembly. Screws for motors needs to be 0.5mm longer than those used normally. In my case, the screw is only one last turn too short. So I…

Pobrania
20
Polubienia
1
Ocena
0
P
PrintablesVandaL

Armattan Chameleon Ti TBS UNIFY PRO 5G8 HV mount

Modified to fit TBS UNIFY PRO 5G8 HV VTX. Check this it you need complete Chameleon Ti rear end: https://www.thingiverse.com/thing:3654907 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2…

Pobrania
19
Polubienia
0
Ocena
0
P
PrintablesFasaArg

Armattan Chameleon TI XT60 rear holder V1

Printed with PETg@100% infill Supports required. The third piece is optional and was included to keep both rear posts with the same shape. WARNING: This is not intended to be used with the original VTX antenna holders. OG Chameleon XT60…

Pobrania
19
Polubienia
0
Ocena
0
P
Printablesmwelter

Armattan Rooster RC Antennas Mount

Antennas mount for use with Armattan's original TBS Unify SMA-Connector mount. You can use the included tubes or some shrink tubes (as I did) to keep the antennas out of the propellers. Print instructions Print Settings Printer Brand:…

Pobrania
19
Polubienia
0
Ocena
0
P
PrintablesG999

Armattan Rooster Caddx Vista/Receiver Antenna Plate

This is a remix of my original Rooster VTX/Receiver Antenna Plate. Updated to hold and protect the stock antenna of the Caddx Vista HD VTX at a 30 degree angle. The receiver antenna tube holes have also had their diameter increased by…

Pobrania
18
Polubienia
1
Ocena
0
P
PrintablesRussell Smyth

Foxeer Lollypop 4+ Mount With Integrated USB-C for Armattan Chameleon

Simple tail mount for Foxeer Lollypop 4+ with an integrated USB-C jack for the Armattan Chameleon or Chameleon TI Category: R/C Vehicles

Pobrania
18
Polubienia
0
Ocena
0
P
PrintableseKale

Armattan Tadpole AIO Adapter

Adapter for Mamba F411 AIO Board Category: R/C Vehicles

Pobrania
18
Polubienia
0
Ocena
0
P
PrintableseKale

Armattan Tadpole Propguards

Wanted to get some Protection without too much weight, would like some feedback if someone is interrested in changing some details. Used https://www.thingiverse.com/thing:4036637 for the Connecting part but turned it around and build…

Pobrania
18
Polubienia
1
Ocena
0
P
PrintablesG999

Armattan Rooster VTX Plate RX grommet

Even at 10% infill my TPU was too stiff to allow me to get this grommet through the hole of the stock carbon plate. I am uploading these files in case someone would like to try with a softer filament. v1 is the exact dimensions of the…

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesKyle Geisler

Caddx Peanut Armattan Rooster Mount

I made this mount so it would screw into the existing camera cage top plate screws and center the peanut camera over the flight camera on the Armattan Rooster. This is my favorite 5" quad frame and I love the combo with the Peanut action…

Pobrania
17
Polubienia
1
Ocena
0
P
PrintablesRussell Smyth

Foxeer Lollypop 4+ Mount for Armattan Chameleon

Simple tail mount for Foxeer Lollypop 4+ on an armattan Chameleon or Chameleon TI Updated V2 removes some excess material to allow for better airflow over components and a little sleeker look. Left V1 for anyone preferring to cover the…

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesJuanOnJuan

Armattan - motor guard for chameleon, marmotte, badger.

Improved by adding curve features to better fit the end of the motor arm and allow for more secure attachment with cable tie. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No Supports: No Resolution: 0.3…

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesFabien T.

Eachine TX03 mount for Armattan prod. Edge 100X

Default titl is 25°, you can use the Customizer to adjust the angle Armattan Edge 100X: https://armattanproductions.com/pages/product_details/3786 FVT Littlebee 20A BLHeli-S 1104 7000kv (alternative: 4x RS1306 4000kv) Piko BLX Eachine…

Pobrania
15
Polubienia
4
Ocena
0
P
PrintablesBddha

Armattan Marmotte/Badger DJI FPV antenna mount with GPS (TBS M8.2)

I made a remix of the awesome "Armattan Marmotte/Badger DJI FPV antenna mount" to make it fit to my TBS M8.2 which is just a little bit larger than the TBS M8 version. Link to the original antenna mount:…

Pobrania
15
Polubienia
1
Ocena
0
P
Printablesclypp

Armattan Marmotte - Beitian 220 mount

The mount has a thickness of 1.6mm sitting on the frame.

Pobrania
15
Polubienia
1
Ocena
0
P
Printablesjangrewe

Armattan Chameleon Camera Cage Bumper with Beeper mount

I wanted to keep the beeper in my Armattan Chameleon build as safe as possible, and not just dangling around somewhere between other parts. This design takes rnelias's beautiful camera cage bumper and just adds a mount for a 12mm beeper…

Pobrania
15
Polubienia
2
Ocena
0
P
Printablesklaasvds

Armattan Chameleon -OG arm protection

https://creativecommons.org/licenses/by-nc/4.0/ Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: Doesn't Matter Supports: No Infill: 100 Filament: ACE FLEX/TPU98 Post-Printing ============= Category: R/C Vehicles

Pobrania
15
Polubienia
0
Ocena
0
P
Printablesnouc

Armattan Beaver GoPro Session holder V2

No need for full disassembly to take of top plate. Just two rear screws Files with ms suffix - are with partial manual supports, for me print came after, just need to cut out holes with scalpel Improvements compared do V1 Moved forward,…

Pobrania
15
Polubienia
1
Ocena
0
P
Printablesdarken

Armattan Marmotte / Badger Arm Protector with LEDs

Arm protection for Armattan Badger/Marmotte frames with slot that fits a "mateksys 2812 led strip slim". Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Category: R/C Vehicles

Pobrania
14
Polubienia
2
Ocena
0
P
PrintablesFabien T.

Eachine TX03 mount for Armattan prod. Edge 100X - 0°

Customized version of http://www.thingiverse.com/thing:2012822 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=2012822 Instructions Using the following options: CAMERA_ANGLE = 0 Category: R/C Vehicles

Pobrania
13
Polubienia
3
Ocena
0
P
PrintablesMiro

Armattan Marmotte Badger camera plate

This is a camera plate replacement for Armattan Marmotte/Badger. Even with the provided foampad I scratched my GoPro Hero7 battery cover on hard crashes or landings. So this puts little space between the bolts and it also puts the strap…

Pobrania
13
Polubienia
0
Ocena
0
P
PrintablesNick Cent

Armattan Rooster vtx antenna mount

I quickly made this in fusion 360 and it came out perfect first time round. First print I used PET. Today, I needed a more durable one, and printed it in TPU. I thought I could share it on here. Print Settings Printer Brand: Prusa…

Pobrania
12
Polubienia
1
Ocena
0
P
Printablesjslaker

Armattan Tadpole Crossfire Immortal L Antenna Mount

This is a small mount for the Armattan Tadpole 3" intended to hold a stock TBS Crossfire dipole antenna at a 120 degree bend. Inspiration credit obviously goes to Mr. Steele. While this is definitely less efficient than a straight dipole…

Pobrania
12
Polubienia
0
Ocena
0
P
PrintablesFabien T.

Eachine TX03 mount for Armattan prod. Edge 100X - 20°

Customized version of http://www.thingiverse.com/thing:2012822 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=2012822 Instructions Using the following options: CAMERA_ANGLE = 20 Category: R/C Vehicles

Pobrania
12
Polubienia
1
Ocena
0
P
Printablesklaasvds

Armattan Chameleon -OG Gopro 5/6/7 mount

https://creativecommons.org/licenses/by-nc/4.0/ Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: Yes Infill: 100 Filament: ACE FLEX/TPU98 Post-Printing ============= Category: R/C Vehicles

Pobrania
12
Polubienia
0
Ocena
0
P
Printablesgomaed

Armattan Marmotte GoPro7

Made some Parts for my Armattan Marmotte Frame. Needed an Adapter for the GoPro7

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesSaow

Arm guards with toes and softmount for Armattan Gecko

Thank you to the original designer ( https://www.thingiverse.com/thing:3198588 ). I remixed it to add some little toes to make it look more like a gecko. I also remixed it to a motor softmount (a little too large, it bends a little on the…

Pobrania
11
Polubienia
0
Ocena
0
P
PrintablesG999

Armattan Rooster VTX/Receiver Antenna Plate

I broke one of the receiver antenna tube nipples and decided to print my own. However after printing I discovered that my TPU wasn't flexible enough to fit through the holes of the stock carbon fiber plate. Therefore I designed a…

Pobrania
11
Polubienia
0
Ocena
0
P
Printablesmuchzill4

Armattan Tadpole VTX/RX mount

Updated design: https://www.thingiverse.com/thing:4910323 TBS Unify Pro32 Nano + Frsky R-XSR mount for Armattan Tadpole. More details: https://rotorbuilds.com/build/24332 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…

Pobrania
11
Polubienia
0
Ocena
0
P
PrintablesFasaArg

Armattan Chameleon - Motor protection V5 (Work in progress)

* UPDATE * V6: https://www.thingiverse.com/thing:2754430 This is a work in progress, be aware that it have a really tight fit! (it may require some slight sanding or filing) It's made based on the 3rd generation of the frame base plate.…

Pobrania
11
Polubienia
1
Ocena
0
P
Printablesanother gary

Armattan Chameleon Runcam Micro Swift 2.1mm Adapter

This is an adapter to hold a Runcam Micro Swift (tested with v2, 2.1mm) on an Armattan Chameleon. Print in solid tpu. Attach to Runcam on either side using the Runcam's included screw + washer and tighten good. Install in the Chameleon…

Pobrania
11
Polubienia
0
Ocena
0
P
PrintablesSalterFPV

Armattan Chameleon GoPro Session Mount

Remix from Armattan Rooster GoPro Session Mount Fits well on chameleon, you can use this mount without void your frame warranty. just insert the cf plate on the mount and insert all the screws fixing the plate on the frame. Print Settings…

Pobrania
11
Polubienia
1
Ocena
0
P
Printablesjaredyates

Rear Antenna Mount for Armattan Chameleon TI Quadcopter with HDZero VTX and TBS Tango RX

This antenna mount allows for mounting both the video transmitter and flight receiver antennas on the back of an Armattan Chameleon TI quadcopter. To mount the VTX antenna, first route it from the pointy end back to the middle. Then…

Pobrania
11
Polubienia
0
Ocena
0
P
PrintablestheFPVgeek

Armattan Rooster & Chameleon Ti Session Mount

ARMATTAN ROOSTER SESSION MOUNT Message me if you'd like one printed. Please visit my Instagram at https://www.instagram.com/thefpvgeek/ for more designs and other related pics. Category: R/C Vehicles

Pobrania
10
Polubienia
1
Ocena
0
P
PrintablesJuanOnJuan

Armattan badger skids with wiring

Remixed the skids to be one piece for both sides, and added channels to allow for wiring LEDs under the arm. Printed great in TPU with no supports. Category: R/C Vehicles

Pobrania
10
Polubienia
0
Ocena
0
P
PrintablesKyle Geisler

Caddx Peanut charging cradle for Armattan Rooster

I wanted a mount for my Arrmattan Rooster and CADDX Peanut that would capture the charging cable, be durable enough to survive a few crashes, and allow me to remove the peanut for use on my other drones relatively easily. I'm a big fan of…

Pobrania
10
Polubienia
0
Ocena
0
P
PrintablesJosh Bryant

Armattan 4" Japalura Micro Camera Adapter

Simple adapter to allow the use of micro cameras in the 4" Armattan Japalura frame. I've included the STL and the Fusion360 file if you want to tweak it for your use. The length will just barely keep the camera behind the roll cage so it…

Pobrania
9
Polubienia
1
Ocena
0