Liczymy pasujące modele…
The Dyson vacuum cleaner toy is a great thing to keep your child busy while using the big vacuum yourself. But most of the time this thing just keeps lying (and flying) around in our closet which is quite annoying. So I made a wall…
Easy print. The two halves must be glued together. I used KrazyGlue and it worked fine. A couple of skewers made the legs. No special settings needed; I used 10% infill but I think you can use whatever you want. I added the black details…
Hook for a glass shower wall up to 8mm thick, for fixing a towel or washcloth. The towel can be inserted into the hook from above with the corner. To remove, the towel can simply be pulled down. Thus, the hook does not accidentally detach…
Our kids love their Dyson toy vacuum. So it gets used quite often and from time to time looses its buttons. Most of the time we find them and put them back in, but lastly one got lost, so I made this replacement which fits very nice and…
I like fidget toys and mechanical keyboards. So I created a little case for single/double/WASD switches and keycaps to click around. Mine is printed with 0.15mm layer height and 30% infill. But 0.2mm and a lower infill should also work…
Fun for keyboard fans and gamers! Designed to be compatible with Cherry MX style key switches. Just add four of those, some key caps, and a lanyard. It's recommended to use XDA form factor key caps, but others should work also! The only…
This is a complete rework of an existing container @Matten79 made, that I have adapted for silica gel / desiccant rather than Calcium Chloride. It features a sturdy and printer-friendly design, multi-body lid so infill can be used to…
Print with Brim and 100% infill. I used carbon filled PLA. Optionally add magnets (6mm diameter, 3mm height): Standard size (¼") bit adapter: Insert the magnet after print. There is a press fit slot inside. Push hard to get it in. Mini…
fidget for your kids or you, it's satisfying
WASD OEM keycaps. I modified the original design so now, when printing, the keycaps are flush to the bed. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Yes Supports: No Resolution: 2.0 Infill: 20 Filament:…
3D printable PLA fidget clicker with bottom holder. Low-profile and durable for satisfying clicks. Recommended print settings: Layer height: 0.2 mm Walls / Perimeters: 4 Infill: 20% gyroid Top / Bottom layers: 5+ Nozzle temperature:…
Remixed @third-dimension-labs clean WASD keyswitch/cap fidget. Opened up the string hole so it can hold 3/32 paracord. Added a chamfer to the bottom edge. Add your own switches and caps. There are 3d printed caps on this site.
Update: There was a bug with the file Fensterlift_hinten.stl, which was the wrong one and was replaced on 1.6.23. Spacer for X1-Carbon (also X1). I did not want the disc to be placed only at an angle, because after all, such a fully…
Summary These are very truth to the original design adapter für 4mm or 6mm (¼ Inch) standard bits. Made one 4mm version and two 6mm versions, one with and one without a 6x3 magnet slot. If u need help getting the magnet in after printing,…
Die Halterung von 3DLing war für mein Modell sehr schwer zum Aufstecken, eventuell gibt es Fertigungstoleranzen. Ich habe mich am Design orientiert und ein bisschen mehr Spiel zum Aufstecken gelassen. Also Zusatz habe ich noch für den…
WASD, Shift, Ctrl keycaps with hexagon tops print with the top of the keys facing up use supports on the bottom of the keys
Please give me some feedback so I can fix the errors on the model My printint settings: Supports: Yes Print so that the font is facing downwards
Adapter for 7Xmm spools to the Eibos 3D Easdry X Filament Dryer. Adaptador para bobinas de filamento de 7Xmm para el Secador de filamentos de Eibos 3D Easdry X Apto para bobinas de filamento PRINTALOT. Print Settings Rafts: No Supports:…
TUSH style spool roller for Eibos new filament dryer, by default it only has a center spool holder than was not allowing my spool to spin smoothly. Tested with SUNLU style spools only. WILL NOT WORK WORK WITH SPOOLS WITH A SMALL INNER…
Press fit PTFE tube connector for the Eibos Easdry filament dryer. The barbed end press fits directly into the rubber grommet in the housing of the dryer. The threaded side accepts a PC4-M10 fitting to connect PTFE tubing. I printed in…
Replacement Bottom Lid for the Casdon Dyson Cordless Toy Vacuum Cleaner . I started with another design off Printables, but after it quickly broken I designed my own version. This is the fifth iteration that I am sure my kid will break…
This is an 80mm sizing and remix of joaolsneto 's EIBOS Series X: Easdry - Upgrades - Fusion 360 Parametric model . The original modeling of the EIBOS dryer and design of the extension components is a near work of art, but it requires a…
Halterung für Dyson bzw Casdon Kinderstaubsauger Damit auch der Staubsauger der Kids sicher verstaut werden kann.
The threads are reversed to prevent unscrewing while the filament is being pulled off the spool. Printed in PETG, PLA is not heat resistant enough and will sag if the heater is running.
The bottom lid of the Casdon Dyson broke while dropping the device, so I designed a replacement part. Printing with supports is recommended. My Print settings: Supports: Everywhere 15% Infill (default) 0.6 mm Nozzle 0.2 mm Layerheight…
Dieser Griff/Knopf ist für Töpfe mit Glasdeckel geeignet, die eine Schraube M5 verwenden. Gedruckt habe ich den mit ASA.
This is an adapter to connect the Magnetic PTFE Joiners by Line Arc Line to an EIBOS 3D Series X: Easdry filament dryer. It supports the “No Offset” type of PTFE joiner. It uses screws instead of additional magnets for the magnetic…
Was tiered of having the toy accessory laying arround so decided to hook it to the wand of the toy like the real thing
This model is made to fit bigger printers such as the Ankermake m5, this way you don't have to glue it together. I took PavelD EIBOS EasDry Upgrade and join them together. After joining them together I slightly made it bigger to fit the…
Optionally add magnets (6mm diameter, 3mm height): With a layer height of 0.2 mm, a pause can be made after layer 141 (28.2 mm) to insert a magnet. This is then fixed with a top layer.
I wanted some translucent keys for WASD with the lettering cut out, to go along with my Escape and Any keys. These ones were printed using Overture PETG @0.2mm and I kept the printed texture so I can feel the slight difference when I put…
Textured arrows to put over WASD keys
This holder allows placing your Eibos Easdry filament dryer on an IKEA Skadis pegboard. ⚠️ Be careful to not run the dryer when mounted on the wall, there were reports of overheating chamber. If you really want to, you could reverse the…
Deckel für standard Honigglas “DIB Imkerbund Glas” Mit integriertem Halter für den Löffel, der darin bequem abtropfen kann. Lid for standard honey jar "DIB Imkerbund Glas". With integrated holder for the spoon, which can drip comfortably…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
Update 17 Feb 2025: I have done a sturdier design V4 for a while now. Made the catch stronger (maybe too strong), added bridges at the 4 corners to reduce the square frame collapsing. Update 27 Apr 2023: Removed <Eibos Easdry Extender…
Holder for the connectors of the ST80 motors and AASD-15A servo drivers. Material should be PETG or more flexible. The connectors are clamped and the holder must therefore be somewhat flexible. Holes are for M6 Bolts.
Having tried alternative spool holders for the Easdry I have had trouble with the spool slipping from its positioning and ruining prints. I also found it frustrating not to be able to easily adjust for spools of differing widths and so…
The Eibos Easdry has impractical spool stopper that uses rubber band that break easily . The spool tend to move to the cover of the dryer and disturb the airflow inside the dryer. This is the solution that i came with: tilt the dryer so…
Simple little stackable trays for drying silica in the Eibos Easdry. I recommend using the stand as the bottom layer, to allow for airflow. Printed in PETG and stood up well, even on the highest setting. No supports needed. To create the…
B2 bomber jet, made popular by this season of “everyone loves Iran”. Free to download. best printed in PLA or PETG
Remixed from ‘Eibos Easdry Mount For Fokoos Odin-5 F3’by nerokb. When I saw the original Fokoos version of this mount design I thought it was awesome and absolutely had to remix it for Ender 3. In this remix I’ve trimmed the fat for a…
Desiccant dryer for Eibos Easdry. Print in ABS or PETG, definitely not PLA. Can be cut in slicer if you want smaller container.
Not much to say really, I just want to have my tools in an easy to reach place so I hotglued it to the side of my 19" rack case. There are also 2 holes for screws built-in but I didn't need them. The screwdrivers bits click in place. You…
Originally designed to be embossed with lettering, after printing i discovered that the lettering was suspended withing the key. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/hCUeiDwCc7Y Print…
Emergency! My granddaughter has a toy toaster and lost the toast! Grandma to the rescue with Fusion 360 and my Prusa i3 Mk3S+ ! This toy toast is 60mmx60mm and 10mm thick. It fits the Casdon Junior Cook Morphy Richards Toaster perfectly…
This is an extension for the popular EIBOS SERIES X dry boxes. IMHO this is maybe the best dry box on the market. Reliable, with coverage for the most used filaments and at very reasonable price… but with its 77 mm of clearance it lacks…
Improved version by Daniel Gladyshev This is a muffler for the intake fan on the Eibos Series X Easdry filament dryer. It makes a decent reduction in the noise from air rushing in, but there is still some humming noise from the fan. I…
WASD support graciously provided the .stp file for the foot. All I did was convert it to stl via FreeCAD and test print it. It works! Released with permission :) Print instructions Print Settings Printer Brand: Prusa MK3s Rafts: No…
Update 9/30/2023: Modified to be one piece and added a few screws in the center Will update in future to reduce the material on the back piece with hexagons or some other design. After mounting, you don't need to use the middle screws as…
UPDATE 6sep2022: Added a small notch below the nozzle to minimize surface tension dragging soapy water in under the dish. ---------- Not much to say about this one other than this is the soap dish I personally always wanted . So naturally…
My Easydry door mechanism broke, the string that you'd pull to open the dryer got torn apart. I designed a replacement. You'll need to print the 2 parts and you'll need an M3x18 bolt and M3 low profile nut. Unlike the original, this works…
Description This design enables the connection of a PTFE tube via a PC4-M10 connector to the Eibos Easdry dryer and may also fit other dryers with identical openings (let me know if it works on other models too please). In comparison with…
A Spool adapter for Redline 55mm and Sunlu 72mm Spools. Other dimensions can be made on request
Hello i have made this E-stop for the AMC-AASD15A servo controller from https://www.thanos-motion.com/products/thanos-amc-controller-rgb-v1-4/ https://www.thingiverse.com/tronicgr/ The E-stop is made with Multi material printers in mind…
[PREFACE: The photographed shelf holder is wider than the uploaded model. The uploaded model matches the manufacturer's specs and has 2 fewer columns of hexes. I widened my Series X to fit wider spools so my shelf is also wider.] I…
A working model of ASD1660 Toolholder from PeWe-Tools. Created for Holding a Dial Indicator. This will fit in a Multifix AS16. See here: https://www.prusaprinters.org/prints/134855-holder-for-dial-indicator I recommend printing all the…
Please consider leaving a like. or just take it and slink quietly out the side door. ------------------------------------------------------------------------------------------------------------- Update. Two new versions added. Versions…
Deutsch: Habe einen Halter für den Parkside PASD 4 B2 konstruiert. Dieser lässt sich nun an der IKEA Skadis Wand befestigen. Dort passen alle 6 mitgelieferten Bits rein und zwei zusätliche Bitaufsätze (z.B.…
I wanted a way to make the placement of the Eibos dryer more stationary, so here it is. Uses factory m4 hardware from the v400 spool holder. If you use the vented top spacers (pictured) or similar the whole top panel can be rotated to…
Parkside Screwdriver 4mm bit adaptor (PASD 4 B2) Also Checkout The Screwdriver Wall Mount https://www.printables.com/model/852182-parkside-electric-screwdriver-wall-mount-pasd-4-b2
Although there are plenty of excellent spool adapters available, I created an adapter for the Eibos Easdry filament dryer that has a few improvements that I didn't find elsewhere. This model features vents on the sides and bottom that…
Missing some spots in the neck for easier inverted prints Category: 2D Art
Honeycomb mount for Parkside (Lidl) Cordless ScrewdriverPASD 4 B2 Includes slots to attach eight tips Printing instructions: Printed with 0.6 mm nozzle, 0.3 layer, 20% infill, optional supports for insert part. Printed on Anycubic Vyper…
Hi ! I created simple but reliable adapter for Sunlu spools for use in filament dryer Eibos Easdry. It's designed for spools with diameter of central hole about ~73,5mm. I use that by myself and it's very helpful because without that…
I buy Eibos Easdry not only for drying filament but also as dry box for filament when i'm printing. But when i'm not using drying cycle then i'm getting back wet air from outside. I'm using filament dryer plug (…
The paracord finger pull on the door of my Eibos Easdry filament dryer broke pretty quickly, which made it really frustrating to open the door. I made this replacement finger pull that can be used instead. Note that the door on my unit is…
I saw this that had been cleaned up and remixed to fit on an Endre 3 and thought. I would like that! And so I made it happen. This one is just held on by friction so to bolts or screws will be needed. Printed in PLA+ 15% infill snug You…
Allows Bambu Lab and Kingroon spools to rotate smoothly inside the Eibos Easdry Filament Dryer with little friction, the spools rotate much easier compared to without the adapter as i found my P1S Printer was having issues with not being…
A simple little plug to seal the the hole in 6d6178 's adapter for dry boxes: https://www.printables.com/model/504853-magnetic-ptfe-joiner-adapter-for-eibos-easdry Printed at 0.10mm with 100% infill in TPU but would likely work in a solid…
Dometic Schlüssel für Glasdeckelabdeckungen. gezeichnet mit 123d design meine anderen Druckobjekte: https://www.printables.com/de/@gerda_219396/models
Spool holder for the Easdry to use with F623-RS bearings and 3x77mm rod.
Bavaria Filament PETG temp 235° bed 80C° infill 25%
Case for generic thermometer/hygrometer, with cable and temperature probe. I was frustrated that the Eibos Easdry didn't show the temperature when drying filament and have since found that it runs colder than stated. Inspired by Allemool…
I wanted a shelf to hold the EIBOS 3D Series X or whatever on top of my SV06 Plus. It's not a great dryer, I don't recommend it, but it's what I have. It works… kinda. PS, you can use this as a base to hold nearly anything up there. Snaps…
printed in PETG or ASA will do. It is going to be a 100% infill print as there is not much filament needed.
Calcium chloride is a salt often used as a moisture absorbent, but it makes this goo that drips water. This two part container stores the calcium chloride in the inside container and the absorbed water can drop down to vat, where it can…
Parts needed: M3 screws M3 heat inserts M3 hammer-nut or T-nut Recommended print settings: easdry _holder - 0,2mm - 25% infill - 4 perimeters - 4 top and bottom layers easdry_mount - 0,2mm - 40% infill - 5 perimeters - 5 top and bottom…
This is a reupload of DE Safety Razor Blade Sharps Bin - Print In Place by alasdairedward on Thingiverse! This is a print-in-place sharps bin for DE razor blades. It should hold at least 60 blades and is completely sealed so it can be…
Parkside Electric Screwdriver Wall Mount (PASD 4 B2) Now with bit storage Also checkout the 4mm bit adaptor https://www.printables.com/model/852208-parkside-screwdriver-4mm-bit-adaptor-pasd-4-b2
A cap for ASDA generic brand spice jars. This is type A1 , which will fit ASDA Cook round jars, as well as their old, ‘no-brand’ versions. Both old and new usually have two openings at the top, which get crusty and become hard to close,…
Remixed model moving the Eibos Easdry away from the Ikea Skadis pegboard giving a 20mm airgap to help prevent the unit overheating due to restricting airflow around the rear vents. Printed in Eryone Standard PETG 0.2 mm 25% Infill With…
Muffin from asdf and the muffin song.
4mm (1/4") bit adapter for Parkside PASD 4 screwdriver
Just a small modification of the Slimbox 2040m WASD to still have the big button A friend's request, I don't like it.
Hinge instead of the spool holder for mchangcreative 's EIBOS Series X: Easdry Upgrades (for filament spools <80mm wide) This will keep all the sides in place and you can only remove the original door. For best sealing in order to avoid…
Hold the spool on bearing and is easier to put in. Added a small file with the wall thinner, Overture cardboard filament spool were a little too snug I recommend using the easdryRollerSmall file since it is the smallest and there is not a…
print with supports top of caps face up
I liked the https://www.printables.com/@Satellietje model, but I needed to keep more bits with the screwdriver, so I created similar stand in that way. The screwdriver has bits with diameter of 8mm hexagon (standard is something like…
Adapter for Parkside Akku-Screwdriver 4V PASD4B2 Bit deep Adapter for 6,35 mm Bit 25 mm FreeCad 1.0.1 Bambulab A1 connector: 25 mm Bit Holder: 25 mm (24mm) Total length: 50 mm Weight PTEG: 2,1 g
Glasdeckelabdeckungen
This is a remix to support PC4-M8 connector, got to reuse the spare PC4-M8 after upgrading prusa mini instead of buying new connector. I also change the body from cylinder to hex shape so that it can be tightened / loosened with a wrench.…
I loved the idea of David Kingsman's design, but wanted to hone it a bit. Changes: Narrowed exterior yellow band to better match actual ASDS Fixed the “X” to better match actual ASDA Added the “Of Course I Still Love You” text Added…
print with supports top of keys faces up
You will need an AMS to be able to print the text.
Der Drehknopf ist abgebrochen - der hier ist stabiler und sieht genau so aus wie das Orginal. The knob is broken off - this one is sturdier and looks just like the original.
This was a quick fix to hold my handy screwdriver outside of the provided box - including holding the isolated bits. It works for me now. There are lots of improvements possible - someone can make it better or I will if I need to remake…
Bit adapters for Parkside electric screwdriver PASD 4 A1 Adapter to 4mm, 6.3mm and 6.4mm rectangle. Printed using PLA with 4 perimeters and 90% infill.
A stylish gamer-themed keychain inspired by the iconic WASD keyboard keys. Perfect for gamers, streamers, or as a unique everyday accessory. ⚠ Important printing note: The model in the STL file is not full keyboard size . When printed at…
