Liczymy pasujące modele…
Print-In-Place with no additional hardware required, making it's easily scalable up or down . All of the credit for this design should go to the original designer: https://www.printables.com/model/565344-automatic-rope-tensioner I've just…
This automatic nozzle wiper is designed to remove the little pieces of filament that come out of the nozzle of the MK4(S) during heating and cooling at the beginning and end of each print, so that the printer doesn't leave any residue on…
I designed this automatic sail instructor, that beginners can learn the wind courses and how to set their sails correctly in a fun way. f you turn the boat, the sail adjusts itself automatically to right position. I know that the sail…
EN: To indicate any automatic closed loop function. DE: Zur Anzeige einer automatischen Funktion mit geschlossenem Kreislauf.
The Balboa Racing iStart is a common fixture in small boat racing. Having used one both coaching, and in community sailing programs, I've also had to service a few of them. Batteries are intended to be “replaceable” by the manufacturer,…
Modeled from scratch, inspired by lwx007's design: Thingiverse #5685812 I saw some comments about difficulties with the original model requiring assembly or gluing, and decided to make a model that can be printed in a single piece and…
Printing: Print can be done with rough settings, 0.25mm with a 0.4 nozzle are fine to go. The "Roller" part needs support for the lower side, since they have to be printed standing. Assembly: Just smack both halfes together, placing one…
It is a system that helps to keep the soil moist wherever it is needed in a flower bed, garden or flower pot. Tested with a 1.5-liter bottle of mineral water, it lasts up to 4 days, but all standard bottles are suitable, I recommend…
Object Description: This is the reinforced Version 2.X of my bag clip with automatic snap-in mechanism. Basically it was already a solid design, but even the strongest part can be improved. Recently my wife showed me our first broken bag…
Rather than setting layer temperatures manually for a temp tower, just include one line of G-custom code in PrusaSlicer's “before layer change G-code" section to do it automatically. You can use the attached .3mf file as a starting point…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Aug 27, 2024] Added a version of the tensioner…
General information Version 2 with a slightly reinforced clamping section is out. See here: https://www.printables.com/de/model/234619-bag-clip-v2-with-automatic-snap-in-mechanism Object Description: Inspired by our bought bag clip which…
The Manticore is (to my knowledge) the first shell-ejecting blowback 40mm launcher in the world. It uses HPA to cycle short 40mm grenades (shells shorter than 90mm), and fires in semi-auto. I recommend printing all of the parts for this…
With this holder for a cleaning brush, you can automate the cleaning system of the Ender 3 V3 KE and Ender 3 V3 SE before each print, achieving a perfect first layer. It's important to modify the startup GCODE according to the brush's…
Introduction Do you wish to showcase your musical taste or share your favorite Spotify tracks in a unique way? Our project introduces a Python script that transforms any Spotify song or album URL into a bespoke 3D-printable keychain,…
Manual tape dispenser with automatic cutting Practical and intuitive, this manual dispenser allows you to cut the adhesive tape with a simple turn of the knob. Ideal for packaging, offices and craft activities, it guarantees precise cuts.…
Assembly For assembly, you will need one ballpoint pen spring with outer diameter 4mm/0.16" and length 25mm-30mm/0.99" - 1.19". You can use one of this Small springs set or Ballpoint pen spring or Compression spring You can use one of…
HAFC V2 – Hackman Automatic Filament Cutter by Hackman3D Here's a link to get the necessary hardware. No partnership or affiliation involved, but since the price is reasonable, I haven't asked for a commission. HAFC Aliexpress Pack back…
UPDATE 16/8/2024 Somehow I uploaded bad spring design but now it should be okay. If it does not work try pulling the spring out a bit or cut it a little shorter. In case of any problems do not hesitate to reach me in the comments. (I was…
I bought these blinds very cheaply from amazon and automated them using Nema17 motors and ESPHome. Many cheap blinds come with exactly the same layout. You will need some experience with electronics to make this project work. Components…
Mounting holes for motor: 22mm ( across) m3 (can be edited with included step files) please use a motor with high torque, and make sure your cable is fixed and cannot move too much, otherwise the cables will just get pulled to the side by…
NOTE:2/1/23 Sorry took so long to get back to this. After a lot of testing I have come to the conclusion that a NEMA 23 stepper with an external driver is the way to go to get the torque needed to wind a full spool reliably. So, I am…
Water Dispenser for Dogs and Other Pets A simple and practical water dispenser for dogs and other pets. This design uses a standard PET water bottle as a reservoir, automatically keeping the bowl filled as your pet drinks. If you plan to…
Remix of ‘Chicken waterer using PET bottle’ by kkwsiu adding a sturdier base and elevated water level. Our delightful and hilarious rescue chook Harriet has anarchistic tendencies when it comes to her love of knocking/tipping/pushing…
Der Ersteller der Dateien übernimmt keine Gewähr für die Qualität oder Fehlerfreiheit der von ihm veröffentlichten Inhalte und haftet gegenüber Dateinutzern nicht für Schäden, die durch deren Nutzung entstehen.
Credit-card sized! large C-shaped part requires a brim if printed in the same orientation as the included files - otherwise lots of support is needed *print Winder Main with a tiny bit of support holding up the fillet if your printer…
Automatic watering for plants with incl. pot. Very solid design printed with PETG.
This automatically opens the lid of a (HÅLLBAR) bin inside a cupboard drawer. Attach hinge to cupboard using doublesided tape and https://www.ikea.com/us/en/p/variera-cover-plate-white-00226315/ Use a 18+ mm M3 screw to attach the peg to…
This is quite an over-engineered tool holder, made to be mounted on a wall, as any other tool holder. But this one is self-clamping, using not less than 12 parts. And all of them are designed to be 3D printed - even the spiral springs……
Hello, this is an automatic fruit and vegetables washing basin. Super practical for everyday use. have fun with the model!!! Model created by lwx007
Semi Automatic Rifle from Rust. Snaps together using pegs built in. AMS optional if you wanted :D NEEDS SUPPORTS If you like and want more like this, please heart :)
This nail holder is designed to hold 1-6mm nails. You can place them in the respective sized hole (each one being an increase of 1mm) and use the print to assure your nails are perpendicular to the nailing surface, while also saving your…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Aug 27, 2024] Added a version of the tensioner…
Automatic fish feeder Updated version. Improve the drill shaft mechanism and reduce friction. Parts List: Nuts & Bolts M4 X 20mm Screws X 2 N20 DC Gear Motor Miniature High Torque Electric Gear Box Motor X 1 Arduino nano X 1 Oneway relay…
This is a fully automatic rubber band gun, and is also on GitHub at https://github.com/AVeryHappyTeddyBear/AutoRubber Please read the instructions pdf for assembly and printing details, it is very detailed so I won't try to reiterate the…
DISCLAIMER: In my testing I haven't been able to get it to reliably work with paracord yet! Every other rope I tested works great, paracord just seems to slip under load at some point. Please be aware. Directional Locking Mechanism:…
Very strong automatic rope tensioner (tested with 28kg for the 4mm paracord version without any damage with PLA material). You can print it directly in place, without any support. Four versions are available -> 3mm, 4mm (paracord), 6mm…
A Pica pencil version of DSkolnik offset scribe Block. Deleted the original pencil holder and added a 5.9mm hole for the shaft of a Pica automatic pencil. Fit is snug, and helps to add a little pressure to the pencil. Other than that, a…
Simple device which help mix the resin before print without tiring your hands ;) It also help prevent air bubbles in resin. As gear I use a “WADE EXTRUDER” gears which I found here: https://www.thingiverse.com/thing:65939
A well designed and good looking can holder which dispenses them as needed. Most can sizes accounted for. If you need another can size, request it in the comments. Suitable for fridges, desks, anywhere you store your cans! Simply print in…
This script will allow you to use the Command Line on your computer + OpenScad to generate HUGE amounts of any OpenScad file (Labels, Personalized Designs, etc) using a simple CSV. How To Use It: Populate the CSV File with everything you…
3x3 system with automatic watering. Convenient for growing various salads and loving plants. Overall dimensions of the pots are 60x60x60 mm. The entire assembly has overall dimensions of 180x200x65 mm. The average time to print a pot is…
Print in ABS using brim and no support. Use automatic rotation beforehand. Carefully remove the four-wire cable shell, cut the red wire and attach an additional cable going to the filament run-out sensor switch to the NC pin and C pin…
This model is probably difficult to assemble, so take your time. The better you understand automatic transmissions, the easier the assembly process will be. I was always interested in how automatic and manual transmissions worked, this is…
Description I recreated the Zen Garden from JustBaselmans from scratch and made it more robust against sand entering the motor parts. Heres a short demo video of how it works: Since this is a motor powered zen garden, you will need a…
The design uses 2x1 gridfinity tiles and has space for 2 dispensers side-by-side, so it can dispense both baseplate and bins magnets. Print settings: Printer: CRS-10 Pro Material: PLA Layer height: 0.2mm Nozzle diameter: 0.4 mm Infill:…
I accidentally uploaded a wrong STL for the button. Its now updated! I purchased a 18650 capacity tester from AliExpres
Download version 1.5.4 or 1.5.6 of the RTCLib library on github (link can be found as a comment in the Arduino file of this project) since there is a bug in 1.5.5 for the time being. It all started with the simple conclusion that I was…
A cheap-and-cheerful solution for automating the chamber vent setting, depending on the filament type used: Attach little tabs to the inside of the vent slider and to the Nextruder, and let the Nextruder push the slider in the right…
a nice 3d printable rust weapon. Its a nice decoration piece for on your wall or shelf. if you want the real size, scale it 1.6 in cura. I would love to see the results. Category: Other
This MMU buffer casette can stay in place during filament loading. Especially convinient if the spool you want to change, is located at one of the middle slots. The filament feeds right through and gets sorted automatically inside. No…
Place over loaded magazine with round nub pressing on the tip of the bullets and press in. Unloads under one second.
Description Syringe plunger that can be automated using a microcontroller and a servo. The plunger is designed to fit a 100 ml syringe. Travel distance of the plunger could be increased in another version. Printing Can be printed with…
Built this model to automatically catch egg scattering when fish spawn and transport eggs into separate tank. It works by hooking an airline up to the 4mm inlet and 10mm pipe up to holding tank. It acts as a funnel for eggs when eggs are…
This yoyo features an automatic return mechanism. When you throw the yoyo hard enough it will go into a “sleeper”, centrifugal forces push the clutch mechanism apart and release the axle. The axle can then spin freely. When the yoyo slows…
Recently, my brother bought himself a toy gun from Aliexpress. He asked me to set out a new set of bullets for him to show off to his friends. Also, he wanted to see how such schematics are made and how much work it takes to make the…
This is the second stage gearbox I'm designing for my Unimog RC project. The second photo shows my UNIMOG RC assembly in progress… While the first stage (to come) is a classic ( fixed ratio ) gearbox with a ratio of 5.5:1 (meaning that if…
Update Dec 1, 2021 I've added step files for easy editing in case you want to make it fit your specific printer, Qidi tend to change their printers without notice from time to time. Support All my designs and mods on Printables are free…
The water tap for my house is in a bad spot and I did not want to have it directly attached to the tap. So I designed a wall mount for the water control unit. Consists of two parts, one “main bracket” which the unit rests on and then the…
Automatic filament purge tool for Voron/CoreXY printers The Goose Belt Purger is a compact, modular add-on for Voron-style printers that simplifies purging during tool changes. Ideal for multi-material setups or frequent filament swaps.…
Automatic shell ejector for Lee Classic Cast reloading press. Automatically discards de-primed shells. Should work with every shellholder. Print instructions Additionally neodymium magnet is required: Cylindrical, 4x4 mm. It needs to be…
Die Anerkennung sollte an den ursprünglichen Designer gehen. Ich habe die Bohrungen verschlossen, dass Modell wird durch Kleben zusammengesetzt. Zusätzlich ist es gegenüber dem ursprünglichen Designs um 50% auf 40mm lang verkleinert, da…
Print, assemble and program your own intelligent Smart Plant Pot. With a hidden water reservoir, pump and sensors why not make your plant care easy. With an Arduino Nano at its core this project uses a water level sensor to let you know…
Feeding the chickens
Automatic hand sanitizer pumps cost upwards of $50 USD. The design consists of 10 different parts that snap together with the snap-fit connectors I designed. The snap-fit connector (iterated way too many times) allow for the parts to fit…
Hello printing enthusiasts, Did you know that the Elegoo Neptune 4 Pro doesn't just have one, but two heated bed zones? However, Elegoo suggests that we all switch to the included outdated Cura Slicer to make use of this feature. Well, I,…
Prusa Automatic Nozzle Cleaner This solution is for the Prusa MK-series printers, that don't really have an out-of-print area, most solutions will either collide during bed-leveling or can't coop with the PINDA-sensor. If your printer…
Edit 17-6-2023: Thread has been made stronger and made more easy to place the bottle. The bracked now has an extra screw hole and fits better with the bath. Description: New version of the automatic bath. Fits standard soda bottles for…
Its semi-automatic - filament is cutting with gcode (move head to position). Also is possible cut filament manually by hand. If you have original riser from flashforge (or printed) i recommend using short version of cutting arm. It is…
This automatic seed sowing tool is my attempt of making sowing seeds in a straight line and with a defined distance easier. The big front wheel is for carving the soil and creating the perfect groove for the seeds. The mechanism is…
This is a Remix from this model by lhomem : https://www.thingiverse.com/thing:4676186 And It uses these universal hooks from CSD_Salzburg : https://www.thingiverse.com/thing:2853257 It now fit flat to the board and I find it is a more…
Gravity-actuated automatic door lock. It uses a [6 mm DIAMETER SHAFT] for the pivoting latch mechanism. Designed for easy assembly, the angled latch drops into place using gravity alone, engaging securely with wall-mounted components—no…
As I wanted to combine some 3D printing with electronics and I thought that it would be nice if the result would be something the cat loves to play with :-) So I came up with this little disc shooter. As you can see, the mechanics are…
Nexdruder Lever Mod from Jürgens Core One Automatic Chamber Vent.
This is an automatic fish feeder controlled by an Arduino. I tried several of the other automatic fish feeders listed online, and didn't have much luck, so I designed my own. It's designed to feed small food pellets, such as the Top Fin…
Smarter Airflow. Better Prints. Zero Effort. Take complete control of your enclosure’s airflow and temperature—automatically. The CoreVent opens and closes in response to internal fan pressure, keeping heat stable for demanding materials…
Automatic refilling bird feeder with optional wall mount and slider to minimize food waste. Can fit all sizes of soda bottles due to the thread. This is probably not the most material-efficiënt design for a bird feeder. However, it is…
This is a food dispenser for the meowton project. You can use it standalone as well. Differences compared to most other printable dispensers out there: Easy to print and assemble Only one simple servo needed No glue/screws or extra stuff…
Case Fan 120mm for Prusa Enclosure with Automatic Ventilation Flaps for Top Assembly and Exhaust Filter 08.16.2023 22:00 Update for the Screw Holes 4 x Screws M3x8mm for the Flaps 8 x Fanscrew A FAN WITH A HIGH AIR FLOW RATE IS REQUIRED,…
This model is compatible with the lego system.
Printed out of ASA material to widstand the suns heat and UV light. Printed without supports. Used a standard 5L Clear Rectangular PET Bottles With a neck diameter of 48mm. Inspired by:…
This is my version of an automatic nozzle cleaner set up. I tried the other models out there but none of them fit with the gridfinity side mounts or other side-storage style models. Install is really simple. Just chop off the end of a…
These models are for converting a drill-powered spray paint shaker (link below) into an automated solution. Just add a motor, delay relay module and some wire and you have your own paint shaker that can be fully automatic and hands-off.…
Various parts to make your own automatic pet feeder (dry food). Print instructions Attach this to some 2" PVC Pipe (Or print it!), the bottom of a food box, and raspberry pi to automatically feed your Pet. Some small screws and CA glue…
A well designed, material conscience can dispenser and holder which dispenses cans as needed out the front.
Installing an exhaust fan to keep your Original Prusa Enclosure cool for PLA or PETG? But don't want air escaping when you print ABS or ASA? Then you need a fan damper! This damper is designed to fit the 120mm cutout on the back of the…
After printing Singh Design's Tape Dispenser Automatic Tape Cutter model, I realised that I could not fit my desired 26mm (1") Scotch tape roll on the original roller. This new wheel and psuedo-bearing replace the original wheel, and can…
Never quite saw a good M42-EF adaptor which actually HAD some way of using automated aperture lenses with, so I updated this design! The already found bayonet mount isn't brilliant, so I suggest you file down the edges of the bayonet and…
"Robot Vacuum Only" Privileged Parking Sign This nifty little sign stands roughly 37cm (14.5") tall, which just looks like perfect scale when placed next to your vacuums charging station. The longest part is 20cm (7.8") , still fitting…
The original auger looked challenging to mount accurately onto the servo as presented, plus it was non-manifold. It also looks to be quite a workout for an FDM printer, although I didn't try. This model fixes the holes and adds a mount…
3D MODEL DESCRIPTION I want to implement automatic transmission on my own RC car, so I created this gearset, just better visuallization and learn how it's work. I included f3d project file, It's not good organising, I've just started…
All functions, including filament rewinding, are fully operational. This mod has no drawbacks. A small update. It may not be obvious, but in order to make the coils spin easily, wash the bearing bushings in any solvent (such as purified…
I took the original model and just made it beefier for a better more secure mount as the original fell off often. I recommend using PETG or at least PLA+. This design also allows use for the cheap Harbor Freight brash brushes pictured.…
🐻 Automatic Pet Feeder - Variable Lenght 🐻 This pet food feeder is perfect for cats, small dogs, or other small animals. Designed with practicality in mind, it offers three tube length options and thoughtful features to ensure smooth food…
This has been recently updated to fix various problems with the original design! You can skip the patch notes if you haven’t already downloaded it prior to this being posted, but just know that the tutorial vid might look slightly…
Check Out the new and improved V2 here ! I'm happy to make other sizes if there is interest.
Chuck with automatic return. you need : 3 pins Ø3x20 1 pin Ø2x6 1 M6x20 chc screw din 912 Mandrin avec retour automatique il vous faut : 3 goupilles Ø3x20 1 goupille Ø2x6 1 Vis chc M6x20 din 912
Hello here is the Espressomachine cleaner I made recently. Its driven by a 12V DC motor. The trigger integrated in the frame so it activated by pressure. The rotor diameter is 55mm so perfect for 58mm coffee machines. The requiered parts…
Riser stand for PetLibro Automatic pet feeder Made this for my pet cats automatic feeder after talking to vet, elevating to 5 inch feeding level will help in eating/digestion. Material: PLA Infill Pattern: Gyroid Infill : 5% Additional…
Ripped straight from the fallout 4 game files.
![#0178 [UPDATED] Automatic Paracord Clothesline Tensioner (spring loaded, for 4mm cord)](https://media.printables.com/media/prints/962703/images/7574921_253a05d3-b794-48ef-9bfe-458d80461001_e08b1156-15dd-4fad-b664-246a109e7b5a/rl-20240819-012.jpg)
![#0179 [UPDATED] Automatic Paracord Tensioner for Clotheslines [spring loaded, for 4mm cord]](https://media.printables.com/media/prints/962702/images/7581598_122262e0-2234-49ee-be2c-d0307a9276db_a2d9492a-091a-48f9-9736-3e0258748626/rl-20240819-011.jpg)
