184 modeli
The “notched” version allows routing cables below the device, otherwise they need to go around the sides. Use a skirt to keep the (at first) separated pieces in place while printing. The version “with USB stick holder” has three slots for…
Wydruk około 2,18 €–2,66 € nettoWstępna wycena jednego wariantu
Slider knob for a Soundcraft, Yamaha or Behringer (probably more) mixer. Tight fit. Print the insert in a different color and glue it on the knob. Printed mine with PrusaSlicer on a Ender 3 V2 with variable layer height and 20% infill.…
Overlay for the Behringer X-Touch universal control surface when used with the XR32 or XR32 rack mixer. The overlay is used to label the X-Touch buttons with their proper names when using the X-Touch with the Behringer XR32 mixer and…
Updated my Darth Fader to fit on the Behringer X32 console, Requires Supports just under the fader overhangs.
A rack large enough to fit 3 Behringer-style desktop synth modules. I designed this at the request of a friend who was rapidly running out of desk space, based on some existing designs found online. This will fit any 3 modules of equal…
This stand can hold two synthesizer. You have to take apart the model in slicer to fit onto bed. You can use heat inserts and 3mm screws or simple glue them together. The two side can held together also if you heatinsert 4 screwnuts on…
This is a replacement fader knob for a Behringer X32. The originals come off very easily and replacements seem expensive for a piece of plastic. These print well on their side with slow bridging. I printed them at highest detail in silver…
Since I only have very little space in my music area, I developed a compact stand for the two Behringer synths. I have sized everything so that in order to protect the synths from scratches, you can easily apply 1mm anti-slip pads in the…
Printed in 2 parts (left and right side). I used PETG, use whatever filament you want. Parts are oriented for printing, I printed it with 0.3mm nozzle (because I'm insane), you can use whatever you want, preferably 0.4 or 0.6mm. Use a…
Pokud se vám model líbí, budu rád za váš like. If you like the model, I would be happy for your like.
I wanted to finally put my mixer into a light case rack. The original mount would be suitable for just that, but I plan on adding some wireless devices and found out that there was not enough clearance for xls plugs to be permanently…
Die ist eine Weiterentwicklung von Christian Tablethalter. Einfach zwei, oder besser drei, der Halterungen ausdrucken und mit den Original-Schrauben des Mischpults befestigen. Die Halter sollten auf der Seite liegend gedruckt werden. Ggf.…
At the time of the Behringer X32 release, the iPhone 3 was the main iPhone and the 4 was just about to be released. The phone holder on the X32 was designed to fit these older phones, but now 13 years later, the holder is no longer able…
A table stand for my mixer. this way I can see all the controls at a glance and from a distance. you can loop the cables under the beam to keep it a bit tidy. Use some force to clamp the parts together. It's a tight fit.
Brackets I used to mount a UMC22 underneath my desk. Should also fit a UM2, but I don't have one to test with. Takes just over 1.5hrs to print each bracket on my Cetus. Mounting holes are sized for #6 flat countersunk screws. You can also…
The faceplate has pockets for 6x2mm magnets to hold the faceplate on the mixer. You can press them in or add some glue. You can print the model as it is and use a pen to label the inputs. I added extruded text for the labels and printed…
The led illuminated sliders of the Behringer 2600 (ARP 2600 clone) don't look that good, are a bit too small and the LED light is not shaped well to indicate the position. SliderCaps2600-slider_Caps_akf_BM is the final design but you may…
Angled stand (22.6 degree elevated) for a Behringer X TOUCH ONE control surface.
Friend of mine liked the design from Thingiverse but wanted a place for the wires to sit. The gap for the wire holder is the same on both sides only because I didn't feel like having a “correct” way to mount it. I included the f3d file if…
This is a remix of one of @CalebKraft’s 6mm trim pot caps, originally designed for the FM-1. They fit the 6mm trim pot knobs found on most desktop mini synths, including the Korg Volca series, Roland AIRA Compact series, Behringer Mini…
This is a mount for a Behringer U-Phoria UM2 audio interface. didn't like how it took up desk space and also how it would get dusty after a while so designed a mount so that it can sit under the desk. uses 4 tiny screws (guitar screws…
Mount for the Behringer UMC202HD USB audio interface (maybe works for other models, too). The front plates are hold in place by M4 melting inset nuts. Printed in Devil Design PETG on a Prusa Mini clone.
Ich habe aus mir unerfindlichen Gründen einen Faderknopf verloren. Dieser stammt von Behringers X-Touch DAW-Controller. Ich habe ihn knallrot ausgedruckt und ihn mit dem Main-Kanal kombiniert. Passt! :-)
Einfach mindestens 2 der Halter drucken und mit den originalen Schrauben des X32 festschrauben. Ich habe auch die Fusion 360 Datei hochgeladen, so kann jeder Anpassungen z.B. für andere Dicken an Tablet vornehmen.
Behringer X-Touch rack mount ear bracket left and right. as these ear brackets are impossible to find online, i made my own ones. Print settings: -Print 0.20 Quality -infill: 40% -Material:PLA -No support Print the bracket with the…
The latch of the original cover is too flimsy and will break off easily. This replacement cover is not an identical copy (with the same problem), but uses a different latch spring concept. Since this lid will sit slightly deeper inside…
This extension allows you to fit Behringer Model D into the same rack/stand with Neutron, Pro-1 or other synths of the same size and case style. It's construction allows to install up to 8hp Eurorack modules. Mirror it in your slicer if…
This recessed rack ear is a (hopefully) improved version of the one made by cedd. The original suffered from too much flex when mounted in to a 19" rack, leaving an impression that it will bend over time or crack when not handled with…
Elevated stand for behringer xtouch mini MIDI controller. Because when its lying flat its not so comfortable to use. Two versions included - one with 27mm elevation, so my friends Keychron keyboard can fit underneath it. You can read…
This is a pair of sideplates with feet for Behringer U-Phoria UMC series audio interfaces. I've installed them on a UMC404HD but they should be compatible with UMC204HD, UMC202HD and UMC22, but I have no Idea if the screw holes match up…
A stand for the Behringer TD-3 Analog Bass Line Synthesizers and RD-6 Drum Machines consisting out of two side pieces that do fit it's casing nicely including recesses for the rubber feet. The bottom side of the stands do offer notches…
Modeled in Fusion 360 Printed in PLA .2mm layer height
This is a simple stand I designed for my Behringer Q502USB mixer. Making things more accessible when placed on a desk. It will probably work great for similar ones like the 302 and 802 as well. Might also work with bigger ones like the…
This is a shock mount for the Behringer XM8500 dynamic microphone. It's designed for use with the stand adapter included with the XM8500. It works great to isolate the mic from stand and desk vibrations - it really helps with stand…
Behringer FLOW 8 dust cover A custom-designed cover that sits over the control surface of the Behringer FLOW 8 digital mixer and keeps dust, debris and spilled crumbs away from the knobs and faders. Why you'll like it Fits precisely over…
This is a custom-designed sun hood for the Behringer X32 digital mixing console. It helps reduce screen glare in bright environments—perfect for outdoor gigs or sunlit venues. The hood ensures better visibility of the display without…
This is a broadcast-style conversion kit for the XM8500, designed to mimic the aesthetic of the Shure SM7B. The model was developed in Fusion 360 using precise caliper measurements of the XM8500. While the internal dimensions are…
This will fit on a Behringer X32 sound board. No supports needed.
A case for the Behringer RS-9 Sequencer allowing you to use it in standalone mode rather than mounting it into an Eurorack setup. The case provides the following features: snug fit for the RS-9 module to reduce the needed desk space to a…
I made a side panel for my Behringer for a direct replacement so you can change colors or make Star Wars versions like I did. Category: Audio
A handy model where you can fix your Behringer Ha400 Microamp device under the table. The bolt holes are open. All you have to do is screw the bracket to your table. I recommend using support in printing. Designed with wide tolerances.…
Side attachments for Midas MR18 and Behringer XR18 Air Mixers to protect the device body from scratches and possible liquid spills on the ground. Adds 10mm space from all sides. Print one piece for each side, which requires four M4 x 10mm…
Ah, the tangled web of the audio interface! We've all been there, wrestling with cables like some sort of octopus in a tech-induced wrestling match. It's a constant battle between a clean workspace and the siren call of sweet, sweet…
Just a simple under desk mount for the behringer um2! My main goal with this mount was just a simple way to mount my audio interface under the desk without blocking any of the ports and dials. Just 4 screws needed to mount it. (Maybe can…
A Stand for the Behringer x-Touch mini that can be mounted on Top of a Saitek or Honeycomb Yoke using their mounting screws for instrument panels. 2 pcs needed. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No…
Hello, Here is small and easy project of Behringer U-Phoria UMC202HD mount. You can put your Audio IF under your table and… stable. In my case printed with PLA.
This is a very simple part to connect the two main faders of a Behringer Xenyx mixer so it's easier to keep stereo volumes equal. This fits on a 1204USB, so I assume it fits others in this range. Takes only seconds to print. Print…
DCAPS are designed for the Behringer Model-D case and can be used either as table top (perfect with Arturia Keystep) or as an extension of an Eurorack Modular System. To mount the DCAPS on the original Behringer Model-D case, remove the 4…
A 40° angled desktop stand for the BERHINGER EDGE, SPICE, CRAVE & GRIND that screws directly to the synth for stable, comfortable hands-on control. Replace the wooden side panels with the printed parts and add 7–8 mm rubber feet in the…
Ive searched for a Behirnger Wing sparepart fader knob knob. I didnt find one that i could buy in an afordabe price. So i grabbed one ar grabcad and modified it. The main probelm the slot for the fader motor isnt more or less "standard"…
3D gedrucktes Gehäuse für den Behringer 2600, ARP 2600 clone im Vintage design. Die obere Gehäuseabdeckung wird mit 4 Schrauben an den seitlichen Wänden verschraubt. Der Korg SQ-1 Sequenzer Gehäuseaufsatz wird mit 2 Schrauben auf der…
The round base of this model provides most of the stability so I printed mine at around 15% infill as it doesn't need to be particularly solid to work well. The side walls are measured to sit between the rubber feet of the interface so as…
The adapter allows you to mount a Behringer POWERPLAY P1 In Ear Monitor unit to a drum rack using a Roland MDH-12 pad mount. The adapter firmly attaches to the Behringer POWERPLAY P1 In Ear Monitor unit by utilizing the mic stand mount on…
This is a remix of a model I published on thingiverse. I made this version a little wider. Print two and add a little bit of sticky rubber to the bottom to keep them from sliding. They should fit pretty well, depending on your printers…
Decided to make something to lift my desktop devices, it actually does add more space to the desktop.. print on side, no supports, there's room for round rubber feet, to keep it from sliding around.. enjoy.. printed 0.3 draft mode (I…
For the longest time, I've had my input mixer leaning up against some small boxes. Then I printed the stand here https://www.thingiverse.com/thing:2038119 However I didn't have a good matching set of hardware to fit snuggly against the…
The default height of 35mm is designed to fit directly above a Arturia Keystep (see pictures).
Behringer WING on-screen tablet stand
This is a remix based off of GameFan 's model found here but edited slightly to allow the UM2 to be mounted. The UM2 has the knobs on its top, so if you're mounting under a desk the unit will have to be upside down. I found that the rails…
I found that printing out the hollowed-out fader knob as was resulted in failed prints, so made the base solid with a hollow inside. Also added a centre line, like the original.
just superglue clip part and mic part each other
Now you can print your own colorised knob for UMC18-20
Print "Part1.stl" twice Every other STL once. i connected everything by pressfitting and gluing. My printing settings: .2mm resolution no supports 15% Gyroid infill Printer: Ender-3 V3 KE
We were updating our church to in ear monitors , but didn't have a digital board to have an aux for each person, and I came up with this idea. Use the Behringer MA400 as a partial personal mix for instruments. Then the Mackie HM-4 for the…
The original side covers of the Behringer X-Touch were too wide to fit a standard 19" rack with an internal dimension of 450mm and also didn't feature any way to mount it to a rail. This model slims down the sides quite a bit, allowing…
In the 3D-files two parts are contained. They are ment to be print seperately and with different colors. So before printing split them to parts. The model is pretty big, therefore i splitted it vertically and added some connectors to…
Problem is, that you need to remove the hole case for changing batteries. I designed a case with a separate batterie lid. Make sure to orientate the lid as shown in the pictures, to have the best compromise between strength of the springy…
quick and easy print of a stand for the Behringer1204USB mixer. i used threaded inserts in the screwholes but it also works without. Print 1 of each side stand, and 5 braces. (can also manage with only 4 braces)
My setup consist of a mixer for my synths, a DI box, in-ear monitors and a powerplay P2 inside a case. I wanted my mixer to be lifted on the back to be more practical and to hide powersupply underneath (about 7cm on the back). The holes…
Behringer FLOW8 wall mount bracket. Printed in PETG, but any filament should hold. I had to remove the rubber feet! Both models should be layed on the side to print.
Make two of the provided orientation and two mirrored (I mirrored them in the slicer). Printed with PLA on a Prusa CoreOne with 10% 3D Honeycomb infill and .4mm layer height. Created in OnShape:…
A 45° angled desktop stand for the BEHRINGER PROTON/NEUTRON, screw-mounted directly to the synth for stable, hands-on control. The raised design leaves space underneath for cable routing and better desk placement with other gear. Adding 7…
This knob is used to connect 2 faders of a Behringer Mixer
Desktop rack for behringer desktop synths, such as pro-1 and pro-800. Supports 2-3 synths, maybe a forth? Uses 8 m4 screws in 25mm length to assemble (for two synths). You will need 16 m3 20mm screws to replace the screws used in the…
A simple cable holder I've made for my RackBrute. The cable slots should work with cables from most manufacturers, except for ones with angled heads (those still work, but tend to point in all directions). Works with any length, if…
These knobs have better visibility of their position, have a better grip and can be customized with any color! They slide on snugly to the encoders. For those of you wondering how I made them multicolored, I used the Color Change option…
ESP: Recientemente se rompió la pieza de plástico que une mi micrófono Behringer C-1U con su soporte metálico. Decidí diseñar este prototipo basándome en las medidas que pude tomar con mi calibre; lamentablemente, la pieza original estaba…
This is a simple BEHRINGER UM2 stand which is one of simple audio interface. I made this PVB filament for the gross of this picture, but it can be made by PLA, and so on. ベリンガー UM2…
Case for the powerplay P2 from Behringer.
I wanted a bit more deskspace and a stand for the RD9, so I made one. Printed with Prusa Mini+ - supports and brim with default 0.2 structural setting, with PLA. NOTE! mirror the model to get both Left and Right. Had a 19" rack support…
The Behringer Neutron semi-modular synth can be mounted as a Eurorack module, but you lose the breakout panel that includes MIDI thru, USB, and power connector. I didn't want to lose those connections so I gutted the electronics and…
Because the smaller UMC devices from Behringer don't have the four screws at the sides, all of the already available stand wont work for them. Therefore I designed this simple wedge to make it a bit more easy to use because you can reach…
Need to get your table surface clean and clutter-free? Just mount all that USB stuff under the table! For easier mounting apply some double-sided tape to the holder. Then do a test fit, and secure with two 3mm screws. To clear the cable…
Desc Lost the tightening nut on a Behringer PM1 in-ear monitoring pack. Couldn't find one at the hardware store so I just made one myself Instructions Use 100% infill and as small a layer height your printer can manage to print the…
Had to make ears for an earless 1U Behringer device I had. Also made 2U because why not 1U fits Composer Pro-XL MDX2600 and Powerplay Pro-XL HA4700 2U fits Ultragraph Pro FBQ3102 Likely they fit some other Behringer devices, these are the…
The Behringer Ultralink microphones are thicker than a standard microphone. I needed to a bracket that fit them for the office, so I whipped these up in Fusion 360. The bracket should fit into a standard base and use any mounting hardware…
I wanted to mount the HD400 from Behringer to the wall. So this is a simple bracket, easy to print wich uses the cover screwholes to mount. The orginal screws are not long enough, so some longer M3s have to be used.
An insert that fits between the batteries and the Behringer Powerplay P2 headphone preamp's housing, eliminating the existing gap to prevent the batteries coming loose in case of an impact. Once during band practice, my in-ear preamp…
The Behringer semi-modular synthesizers are great if you're rack mounting them, but their form factor isn't exactly conducive to having an organized desk. The logical decision is to go vertical and switch to a tiered stand, but I decided…
I was using a color printout for the last longest time with my xtouch mini and the wonderful SW from https://rsjaffe.github.io/MIDI2LR/ to speed up my lightroom workflow without buying all the expensive gadgets out there. I became unhappy…
Wall mount for Behringer Xenyx q802USB with Headphone stand. - You can hide Xenyx cables ( and the ferrite ring) - You can lead an XLR cable (10mm max) through the wall mount (on my picture: Roland professional audio cable) - There are 2…
My friend has a Behringer mixer panel, and i made him a custom “Master” fader. This fader button, couples left/right master channels. Printed on Creality Ender 5 pro, with basic settings (Standard Quality) Nozzle: 0.4 Bed Temp: 60 Nozzle…
Quick and dirty modification of the original. All credit to the author. Print Settings Printer Brand: FlashForge Printer: Adventurer 3 Rafts: No Supports: No Resolution: 200 Infill: 20% Triangle Filament: SUNLU PLA - Black How I Designed…
A simple collar for the Behringer DCX2496 Power Button. The collar prevents accidental button press and it also acts as a guide for the button. The part is designed to replace the original collar (if broken etc.) and it is meant to be…
Printed in three parts that need to be glued together. Optionally, you can insert two 3x30mm steel dowel pins to increase the strength of the glued part. Material 10mm wide 12V LED strip 4pin XLR male connector 80cm cable 2x 3x30mm steel…
This part is a simple behringer mixer slider based on a slider from a Behringer Eurorack UB1832FX PRO. I printed it with an 0.6mm nozzle at 0.2mm layer height and it fits well.
Quickly spot your microphone channel with this 3D printable MIC fader cap . Use it at home, in public spaces, studios, events – wherever you mix. Print and mix like a pro! Fits most mixers, including Behringer, Yamaha, and many others . .…
Behringer X touch mini stand
Mic Ring fits the Behringer C-3 If you make your own mic mount / ring: The hole connecting to the post will need to be 15 mm in diameter and 14 mm in its height to work well (Optional: add 1.5mm chamfer to the top of the hole for a better…
