86 modeli
Simple benchtop stand and stacking brackets for using an EKWB EK-Quantum Surface X-series radiator on a benchtop. Desgined for and tested with the X360 but should work with the X480 as well. This model could easily be adapted to work with…
Wydruk około 1,81 €–2,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
NOTICE: Use extreme caution when working around high voltage and high current devices! Please seek assistance if you are not comfortable working with power supplies. Update 12/09/21 - Increased overall length by 10mm to allow more space…
This is my version of the Lab ATX Power Supply. I've included a couple of variations of the panel frame vent holes. I also included blank panels for you to design your own layout. Enjoy! Print Settings Printer Brand: Prusa Printer: I3…
Very important note! Only open the power supply if you know what you're doing! The capacitors can store a great deal of energy for a very long time, even after the power supply has been unplugged. By that, I mean enough energy to kill…
Two models are provided, one with a centered port designed to hang off the edge of a table (and easier to print unsupported), and one with an offset port (would probably require supports for FDM) if you need to mount flat to the table.
this is a case for the DPS5005 Power Supply Module
For this particular project I used 500W ATX power supply. Additional parts: 1x 2A USB socket 8x 4mm banana type connector 1x power switch 1x Buck boost power module Printed with PETG 0.2mm
Benchtop mounted clay extruder. Insert the die of the desired shape, place the clay into the cylinder and press down with the plunger. Works best on softer clays, and the clay may need some wetting down to work. The smaller the die shape,…
Print-in-place, no support, 0.2mm layer height. Made for the Benchy Remix Contest, and because it's just fun. Enjoy!
Get your benchtop multimeter away from the bench. Clears some space. Print, snaps in original foots, 4 x M3 screws needed. If you have this thing, you will know what to do.
In our genetics lab, we have a couple of small and simple centrifuges only to spin down PCR strips and tubes to remove droplets of liquid from the wall and cap of the tubes. When one of these broke, I realized how expensive these…
Acquired a benchtop jointer second hand, but it was missing the dust port adapter. This works with the Delta 6" Variable Speed Bench Jointer as shown, and possibly works with the following as they all look like they are made in the same…
Adapters for adding a benchtop to the IKEA RÅSKOG trolley . Great for the workshop or anywhere you want a small mobile bench with storage. I had a spare piece of kitchen bench which I used for the top which was about 37mm thick but…
I remixed these awesome designs to incorporate a handle and make it fit securely without drilling holes in to the Power supply and other stuff Revisions: added a handle to the top added a backplate with M3 brass inserts (4mm hole) made…
There are many instructables, models and tutorials for transforming an old ATX power supply into a fancy benchtop-lab-PSU, but opening the unit, desoldering cables and combining different lanes always intimidated me. I am no electrician…
An articulated Benchy with articulated octopus arms which I hope will win the contest. Please like and download this model to support me.
The OWON benchtop meters XDM1041 and XDM1241 are both nice units for benchtop work but could use some gridfinity lovin' so here we are. This model should fit the meter tightly such that it won't just lift out of place. To insert, start…
Benchtop Case for Heltec V3 - Desktop Meshtastic Node A purpose-built enclosure designed for desktop/benchtop use as a stationary Meshtastic node. This case features integrated buzzer support, generous clearances for expansion modules,…
~220mm (Wide) X ~185mm (Deep) X ~90MM Tall. You only need support on the front lip, as shown in the screen cap. That's the intended print orientation as well.
Simple Holder for a Hygrometer I wanted to display near my 3D printer. The back is intended to break-off to leave the back of the meter as exposed as possible. Recommend printing at 0.15 to get that work well. NOTE: This is my model and…
This is a 90 degree elbow for connecting a full sized Shopvac to the Harbor Freight Benchtop Abrasive Cabinet. This fastens to the left side of the cabinet replacing what is intended to be the throughway for an air hose. I connect the…
Benchtop Powersupply I built this power supply for my electronics projects. I mostly used modules so there is no need for building circuitry, the parts just need to be wired together. The case is designed to be printed on the Prusa MINI.…
Update: FrontV2 maintains the 0.75 inch distance between binding posts I was in need of a reliable power supply for my maker space. I need two adjustable outputs, constant voltage/current, and voltages from 3.3 up to 30 V. Having 5A was…
This is a ISDT K4 Charger Stand that clips onto the charger and holds it at a 130 degree viewing angle. It requires 4x M3x14 Countersunk Screws 4x M3 Nyloc Nuts The pictures I uploaded had it assembled with M3x16 countersunk screws. I…
My OEM fences would swell up from the year-round humidity, so instead of buying replacements, I designed these. Print Settings Printer Brand: Ultimaker Printer: S5 Rafts: No Supports: No Resolution: 0.15 Infill: Any Filament: Any Any Any…
A bench top power supply in the style of this video but with a different design based around a Acer Veriton FSP250-50GLV 250W PSU (pictured) could easily be adapted to a TFX or Flex ATX psu, FreeCAD file and step files included for easy…
Other part files can be found on the original model page: https://www.printables.com/model/256335-atx-benchtop-power-supply-0-30v-remix-fusion-360 The twin USB ports are connected to the 5V standby rail so are always powered Parts list:…
2026.08.04 Update (v2) - Added Large Flange versions, bigger footprint = better stability. 2026.08.05 Update (v2.1) - Added a one-size version, redid TinkerCAD to make it easier to edit. about OpenBenchTop I started a personal project…
This is a conversion of an HP DPS-800GB server power supply, into a benchtop supply with connectors more commonly used for electronics and electrical prototyping. It's designed to be relatively easy to make, and not least easier to…
These are made for a large format printer. I printed in PLA, works but they are a bit noisy just because of the surface
about OpenBenchTop I started a personal project slowly uploading all my 3D printed gadgets helping my job in biomedical research. This project focus on generic objects that you might find nice to have, that improves your quality of life…
Small bin for storage or sorting of small parts. Can print in vase mode. Approximately 200mm long, 120mm wide, 30mm deep. No supports.
I installed a mains powerboard in a caravan and had to cut a hole through a vestibule benchtop. The largest (electric drill) hole cutter saw I had was 50mm and was just enough for the power plug to go through, so I needed to have a filler…
There's a lot of DC18RC mounts out there. Here's another. No screwing into the charger itself. These feet need to be printed in TPU. Ya pop out the original feet, jam these in, and screw the little “ears” down with #8 screws! The charger…
A nice and simple case for a power supply module with banana plugs and an output fuse. The power supply unit which this is based around can be found here: https://www.aliexpress.us/item/3256805327509247.html and the fuse block and banana…
End-mill, collet and wrench holder for the Roland MDX-40A benchtop milling machine, or just about any small milling machine. It has holes for end-mills with 1/4" and 1/8" shank diameter and holds both wrenches used to remove the tools.…
A simple benchtop 1/8 Din Enclosure Note: There are two version! I highly recommend printing the Print-in-place version as the legs can be difficult to snap in afterwards. There is a 0.20mm clearance between the legs and the outside of…
The Switch Box is a compact and efficient solution for controling the power to your benchtop devices. It is equipped with two standard banana plugs on either end and a switch in the center for easy control. The switch allows for…
Got some old Dell's donated to me and wanted to convert them to benchtop power supplies but they had a strange shape so I made my own model for them! Could be useful to some one else, it's also done in OpenSCAD so you can tweak it to your…
This is for my Harbor Freight band saw. Its made for about an 1.25" hose.
This is the mini-press https://am-smart.com/collections/accessories/products/hedgehog-benchtop-press-versatile-360-rotational-drill-press-am-230680 TS101 and CNC Kitchen's thread insert adapters require no introduction. STEP file is…
Designed to sit on your bench and allow brushes, sponges, and dish cloths to drain and dry without cluttering up the work surface. Has a kumiko front to look less utilitarian. There are two versions of the body of the device; The one with…
I designed this so it is possible to easily house several small devices i.e. Raspberry Pi or cubie inside of an ATX case, powered by ATX power supply via 5v rail through a benchtop adapter. The benchtop mount makes cable management and…
about OpenBenchTop I started a personal project slowly uploading all my 3D printed gadgets helping my job in biomedical research. This project focus on generic objects that you might find nice to have, that improves your quality of life…
This is a housing for a benchtop power supply using the "MingHe B3606" CC/CV module. There are several variants of this module, this is for the 36V/3A 50x66mm version. If you have a hard time finding the module for purchase try a image…
This is another benchtop ATX-based power supply. The key thing about this one is that I wanted the power supply outside of the box. It just plugs in so if you fry it accidentally or need a different one, you just unplug. This one is done…
I wanted this power supply to be modular so if another front or rear port was required in the future, you could remove and print only the necessary component. This is fairly rough so far, the port for the USB PD board is included in the…
Simple stand/base for ATX breakout PCB from many popular Chinese websites. https://www.aliexpress.com/item/24Pins-ATX-Benchtop-Power-Board-Computer-Power-Supply-Breakout-Adapter/32492136508.html Category: Electronics
it is 60W benchtop power supply made of Older computer SMPS and sk120 buck-boost module. Bill of Materials item Qantity price link to buy Pla+ filament 300gram 3$ https://india.numakers.com/products/pla-filament SK120X DC Buck Boost…
Ceci est un outil avancé pour labo et il permet de combiner 5 fonctionnalités pour expérimenter facilement et pratiquement. Les tubes et strips pcr sont accessibles grâce aux liens fournis Les 5 mods : Centrifugeuse pour tubes de sang :…
Dremel 200 series benchtop holder. Could use any #8 screw (wood screw, drywall/construction, flat head screw) or m4
This is a case for the Benchtop Power. Use 2-56 X 1/2 screws for mounting, but the size of the hole for mounting can be easily changed. Designed using OpenScad. Print Settings Printer Brand: LulzBot Printer: TAZ 5 Rafts: No Supports: No…
This is a more "traditional" dust collector attachment that fits in the center of the fence in a Ryobi R101 router table. As you can see in the pictures, my fence is broken and so it needs an insert in the middle to keep the two sides in…
This is a compact benchtop power supply case for the popular DPS5005 and other DC/DC controllers in that family. It also provides the ability to mount it to IKEA SKADIS above your bench to free up space. I am powering this DPS from a 19V…
A variant in the design to be able to put benchtop adapter on a table top and have some insulation. V 1.1 Using NopSCADlib hanging_hole for better printing M3 nut traps. Hardware Required * 4x m3 10mm bolt * 4x m3 nut Libraries used in…
Your fingers will thank you.
This is essentially a docking station for the nanoVNA-H4. When coupled with the tinyPFA firmware (which I have no association with), it becomes a pretty powerful (and cheap) Phase Frequency Analyzer. If you aren't familiar, PFAs allow you…
Designed to hold up to 21 4mm bits, held far enough and loosely enough that they're easy to grab.
This tool holder has a bin for small items, holes for hand tools and large glue stick, and a bar to hang pliers on.
Small Storage for Mills, Drills and Tools for the Benchtop.
This page includes a single project file (.3MF) containing all of the printed parts needed to build SolarSim - an inexpensive, open-source, benchtop solar simulator for the study of phototaxis - the movement of plants and algae in…
Mini Benchtop Power Supply Case A compact desktop enclosure designed to house a laboratory power supply built from two modules: a DC-DC buck-boost converter and a USB-C PD board. DC to DC Buck Booster Converter Module: WZ3605E DC DC Buck…
I made this model based on the Hedgehog Benchtop Press - Versatile 360° Rotational Drill Press AM-230680, I made this just for fun. And the dimensions and shape are not accurate according to the original product
THIS IS NOT A TOY AND CAN BE DANGEROUS! This model is mostly supportless & can be built without taking the electronics apart (no need to de-solder electronics). UPDATE LIST & EXPERIENCE: So I tought that the motor was exclusively built by…
Solid piece or glue-together adapter for 1.25" shopvac hose to connect to Wen benchtop sander for dust collection. Tight fit and looser fit model included, as the tighter fit cracked a bit when the vacuum hose was inserted too forcefully…
Bench top holder for a pH probe. Designed around a Metrohm 6.0.220.100 pH probe. Designed to print with no supports, has a hole in the bottom of the tube to allow liquid and air pressure in/out. If you like this design, you can say thanks…
a bench top mounted holder for an area 419 reloading funnel to make adding powder easier
Do note this has to be mounted before you mount the cabinet on the wall. The best way to mount this is to add a strip of double sided tape to the top of the bracket, install them, add the benchtop and then slide the whole benchtop with…
Different shapes of retainers for holding a nut and washer for 5/16 bolts to the underside of my workbench. This allows me to remove the bolts holding my vise and later put them back in without having to remove drawers or use 2 sockets or…
The HP6622A is a high-quality power supply, but it is also very bulky, so you don't want it on your desk, and this is why I created this breakout box. The box is made to be 3D printed, and the front panel is made to be laser cut and…
Completly parametric (f3d and step) so you can modify to fit your favorite drink with ease
I created a microbit version and have had requests for other sized bits. There is a step file and stl file. No Monetization Without My Permission : You CANNOT use this work for any commercial purpose (e.g., selling, ads, streaming, NFTs,…
If you've purchased the 24-bin Benchtop Parts Rack from Harbor Freight, you may have noticed that each bin has slots/holes for up to three dividers, but it doesn't come with any. It's a pretty nice organizer even without dividers, but…
Paintstation geegnet für Din A3 Schneidematte basierend auf eine Skadis Board.
90x68mm footprint. Just a super simple square benchtop organizer No spot for the gauge cause we all know where that goes (powerfist is the house brand of a tool store called Princess Auto in Canada. It's our version of harbour freight)
TinkerCAD link: https://www.tinkercad.com/things/57XCZn2G9W2-obt-disintergrating-belt-link-13mm-vacutainer-vacuette This is an OpenBenchTop creation. We use a lot of 13mm blood collection tubes in the research lab, this is just one of the…
It is a baseplate. A big one that I printed in sections on my Creality K1. It comes in parts to be able to then snap into place. All told it is 501x673 mm (19.75x26.5 inches). I use mine in the top two drawers in my Milwaukee toolbench.…
Get the hardware: Buy Kit or Fully Assembled Unit Complete Source: GitHub Repo Overview: Open-source vacuum tweezers built for repairability. Engineered for SMD soldering and precision rework, with a robust design adaptable to any…
Basic fan shroud to direct air flow over Power Supplier components more effectively . Stock configuration has the MOFSET heat sink blocking direct air flow. Power supply link below. Can't say its the best but its fairly high current for…
Used for keeping the comparator set organized on your benchtop if you use them every loading session like I do.
Description I wanted one hole pattern in the workbench and interchangeable 200×200 mm aluminum plates for different tools (reloading press, vise, etc.). Measuring and transferring holes by hand was the weak link. This printed template…
Paintstation geegnet für Din A3 Schneidematte basierend auf eine Skadis Board.
If you've purchased the 24-bin Benchtop Parts Rack from Harbor Freight, you may have noticed that each bin has slots/holes for up to three dividers, but it doesn't come with any. It's a pretty nice organizer even without dividers, but…
This is a compact benchtop power supply case for the popular DPS5005 and other DC/DC controllers in that family. It also provides the ability to mount it to IKEA SKADIS above your bench to free up space. I am powering this DPS from a 19V…
My OEM fences would swell up from the year-round humidity, so instead of buying replacements, I designed these. Print Settings Printer Brand: Ultimaker Printer: S5 Rafts: No Supports: No Resolution: 0.15 Infill: Any Filament: Any Any Any…
THIS IS NOT A TOY AND CAN BE DANGEROUS! This model is mostly supportless & can be built without taking the electronics apart (no need to de-solder electronics). UPDATE LIST & EXPERIENCE: So I tought that the motor was exclusively built by…
