Wyniki wyszukiwania: bottom

Rounded Bottom Box with Lid

Box with a rounded bottom, for easier grip on small things, such as nuts or beads. Lid with a simple locking mechanism. Includes stand 3x3 and 3x4. Double size here.

Multiboard bottle holders with open bottom in various sizes

Multiboard bottle holders with open bottom in sizes from 25mm to 120mm. The bottle holders uses the flexible MultiConnect connector. Just attach MultiConnect connectors to your board and then mount the bottle holder on these connection…

Bikini Bottom, SpongeBob - Aquarium / Fish Tank Decoration

🫧🪸🐚 Ahh… Bikini Bottom: Ze Home of Beloved Aquatic Cgeatures 🧽𓇼🐙 🐿 🦀 There are plenty of pineapples, moais and rocks under the sea—you can find those anywhere. But… have you been to the actual Bikini Bottom? Print this whimsical…

🧊 Stable Low-Poly Vase (increased bottom area size)

Info: I like original vase (thanks @Riskable !) I just wanted larger base area (which is touching the ground) so I increased dynamically this part → increased stability of the vase Size: note that default 100% size is quite small, so I…

Bicycle Bottom Bracket Cable Guide

Most new bikes should come with one of these, but after a while, they will wear out. This one is scaled to fit a 44mm diameter bottom bracket shell, but with the magic of 3d modelling, one could scale bigger or smaller as needed. I have…

Blumenvase mit verdrehtem Unterteil (flowervase with twisted bottom part)

D: wasserdichte Blumenvase für Rosen, Tulpen, etc. Höhe gesamt: 370 mm Lochtiefe: 170 mm Durchmesser außen: 108 mm Durchmesser innen: 93 mm !!!Keine Haltbarmacher zum Blumenwasser beimischen!!! E: waterproof flower vase for roses, tulips,…

Bottom Reinforcement for 0.25, 0.8, 1.0, 1.25 and 1.50 mm thickness

For 0.25mm, 0.8mm, 1.0mm, 1.25mm and 1.50mm thickness of transparent PET shield. Original version often cracks. Print instructions I use 5 perimeters, PETG.

iPad(or tablet) holder with flexible flap (wall or bottom mount)

A simple iPad holder with flexible flap I designed it for my iPad with cover (11.0mm thickness) but should work out for similar size tablets too. The flexible flap makes the take in-out handling much easier. The picture shows mine that is…

Prusa mini enclosure plugs for the bottom panel

The Original Prusa MINI Enclosure 1.0 has two big holes in the bottom panel. I made these plugs to seal them in the hope to preserve a little more heat inside the enclosure. You can find three different plugs here: covering the whole hole…

Vertical Blinds Bottom Weight

The bottom weight of the vertical blinds kept breaking repeatedly, and I decided to design my own version that incorporates washers/coins, allowing for easy weight adjustment. The version I created is made to accommodate the dimensions of…

Bottom coil carrier for Sewing machine coils

Every sewing project needs a different color, and for every color a new coil have to set up. I just lost the overview wherefore I made a simple carrier to keep them organized somehow. It works for standard sewing machine bottom coils (at…

Stars and circles motif crochet basket or purse bottom (base)

36 holes, two or three colours

MEC-GAR 1911 Magazine Bottom Pad

I received a MEC-GAR magazine .45 Auto 8-shot that did not fit into my PETERS STAHL 1911 pistol. The magazine wasn't fully insertable and therefore did not lock. After some investigation I found out that the original bottom pad was too…

(Un)Original DryBox bottom seal with PTFE passtrough

I wanted to have a passtrough for the DryBox and add a nut holder for the middle screws. I used Passthrough_Cover.stl for the hole dimensions to get the fit just right. From the other files I got the dimensions for positions of holes and…

Wyze cam mount for Prusa Mini - Bottom Cut Flat

I went to print Frankincell's wyze cam mount and found that it sort of fillets up a bit from the bed which means overhangs that are hard to print. I literally just sliced off the bottom couple mm of the object so it's flat. No supports…

Kitten motif crochet basket bottom (base) 32 holes

two colours, 20 cm

Bottom for RC3 Face Shield using 8mil Binder Covers

Remix of the bottom piece of the Prusa RC3 Face Shield (non-US version) to fit securely to an 8 mil plastic sheet such as binder covers. G-code and Model files are setup using the same print settings as the Original Prusa RC3 for fast…

Desk Organizer (Filleted Tray Bottoms)

This is a simple remix of ChristianR 's desk organizer. I made the following changes: Removed the back slope on the front left two trays so the back wall of the tray in completely vertical. This helps prevent small items and dust/dirt…

Bottom bracket spacer

bike bottom bracket 5mm spacer = instead of two single spacers BSA BB

Prusa MK4 Z-Bottom Motor Hole Dust Caps / Covers

Worried that filament might find it's way into the Z-Bottom motor mount screw holes? Here's your solution! I've made a couple versions of the caps and provided bother .STL's. V2 = looser fit; easier to remove V3 = tighter/snug fit; not as…

Seashell Dish with flat Bottom

Best print upright with brim and tree supports. I printed with 0.15mm layer height. STL V3 and GCODE V3 both tested on my CORE One +

IKEA Tertial Bottom Steel Tube Strengthening Insert

I made this since my the bottom part of my IKEA tertial lamp was bent… I designed this in Fusion 360, made to slide into the bottom of the steel tube part of the lamp. Its drawn with a diameter of ø9.65 mm to slide in the pipe that was…

Normcore 54mm Bottomless Portafilter Funnel

This is designed specific to the dimension on the Normcore Breville espresso machine portafilter. The Normcore portafilter was slightly different than the Breville portafilters and using other funnels didn't quite fit. The inside…

Honeycomb Cup Solid Bottom Remix

A modified version of the honeycomb cup with a solid base. When used for pencils and paint brushes they were falling through the bottom. There's two versions. One with a solid bottom and a raised hexagonal design and one with a smooth…

Universal 2-Sided Phone Stand for phones with an fingerprint reader at the bottom

This is a simple and clean universal phone stand with 2 different viewing angles for smartphones with an fingerprint reader at the bottom. Fit's for example the IPhone SE. This is a remix of this original model:…

Zig zag motif crochet basket or purse bottom (base)

36 holes, two or three colours

Xbox Serie X Bottom Cover

Wer seine Xbox gerne hinlegen möchte und den hässlichen Standfuß verschönern möchte

Bottom plate for crochet basket with bird (tit) motif

I am not some kind of great crocheter, but I liked to work with this model very much. I hope that someone else will too.

Crochet Basket or Bag Bottom Dragon

dragon bottom - first color is light, second printed color is dark (black) and third is that one you just need to use because there is too little of it for any project but it is waste to throw it into trash bin - oval bottom is for same…

Moss Pole - Improved bottom - Spikes

I have created my own version of the improved lower part for the moss rod. https://www.printables.com/cs/model/316281-stackable-moss-pole-climbing-plants-support The star is beautiful, but it doesn't stick in the clay very well. Easier to…

Hot Glue Gun Storage Box - bottom v2

I printed this part with a 0.4 HF nozzle at 0.25mm layer height and 10% infill in 3h 10m. For the other parts for the box please see https://www.printables.com/model/541949-hot-glue-gun-storage-box

Frame for standing table clock without bottom arch

If you decide that the appearance of your clock needs to be improved, if you had an accident while printing and the layers shifted (for example, due to a power outage), the foot came off the base a little, or if you ran out of filament…

IKEA Lundskaer Water Tap Bottom Ring

IKEA Water TAP Bottom Ring LUNDSKÄR. Print instructions Printet with ABS.

Crochet Basket or Bag Bottom

pumpkin bottom - first color is black, second printed color is orange and third is that one you just need to use because there is too little of it for any project but it is waste to throw it into trash bin - oval bottom is for same…

Floating Soap Dish with Bottom drainage

See this post : My next approach to handling the soap bar problem: a floating soap dish with a perforated bottom so drying and draining from below can happen. My journey so far: 1. standard soap dish. It's a slurry mess. 2. fancy soap…

Retainer bolt for bottom tray in Kliko waste container

I re-contstructed a retainer bolt for securing the bottom tray in our waste container (brand: Kliko) because I was unable to find a replacement for the one that was broken. The design contains a 3D printed grommet (flexible filament) and…

Open DSKY Big Back Bottom

Bottom with center battery box for Big back Open DSKY. Print instructions Galaxy Black PLA Prusament.

SD Accessible Bottom for Modular Snap Together Case for Raspberry Pi 2B/3B/3B+

Alternate side mount bottom for Sneaks' modular raspi case. Provides easier access to SD card. Now fits RasPi 2B/3B/3B+

3 Neck Round Bottom Flask Bead (3 Bead Holes)

A simple bead that looks like a 3 neck round bottom flask, modified so each of the necks has a hole through the entire model giving more bead options.

Tactile Patch Sheet - DFAM Big Bottom Bass

Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets

Open DSKY Big Back Bottom Ring

Ring that goes on top of Big Back Bottom to connect to Big Back Middle section of Open DSKY. Print instructions Galaxy Black PLA Prusament

Filament rack with bottom brackets for 1" dowel.

I ran into a situation where the “Stronger Filament Spool Rack” was just a touch too tall to allow for 5 rows in the space I had available. So I've remixed the bracket to be flat on the bottom, and added holes for TPU feet to keep it from…

Open DSKY Slim Bottom

Slim Bottom for Open DSKY Print instructions Print with Galaxy Black PLA Prusament.

Bottom Cover for Seeed Studio ATX PSU Breakout

I've been using the Seeed Studio ATX PSU breakout board for a while now and nearly had an incident by leaving the board floating around the desk with lots of metal bits around. I decided to make a simple cover for the bottom to prevent…

IKEA_Lack_enclosure_table_bottom_boots_v02

IKEA Lack enclosure table bottom boots v02

Bottom case fort Pabobo nightlight/ socle veilleuse Pabobo

Repair for missing bottom case for Pabobo nightlight Remplacement du socle de la veilleuse Pabobo https://www.natureetdecouvertes.com/puericulture/chambre-bebe-enfant/veilleuses/veilleuse-nomade-beige-31161190

Rounded Bottom Box with Lid and Magnets

Remix an existing box to store the spare screws and save space. I use 10x2mm magnets. Printed with 0.2 layer height

10×10 cm Pocket Scale Support Pad/Case Bottom

Purpose This miniature scale (platform size 10×10 cm) comes with a clear plastic cover that also dubs as a hopper for weighing loose materials. The cover will protect the scale if it has a dedicated place on your tabletop and you can just…

Money Collection Bottom Spacers

Introducing our Money Collection Coin Spacer – the ideal solution for organizing your coin collection in hard cases with foam inserts. If you've ever faced the frustration of plucking out foam squares only to have your coins sink all the…

Audi a6 c5 shifter bottom leather mount

4b0 863 279 c wjd 80881

IKEA_Lack_enclosure_table_bottom_boots_v01

IKEA Lack enclosure table bottom boots

Snowy Owl (Hedwig) with flat bottom

Remix of the snowy owl Hedwig by Peter Farell with a flat bottom (for an easier print)

DJI Mini 3 Pro Propeller holders (top & bottom)

Printed in PETG provides adequate flex for putting them on and off multiple times.

Beyblade remix new tops and bottom

Joined the four bottom parts of the original so that no screws are needed for assembly. Also made two different new tops. The middle ring remains the same as the original. Hope you like it and have fun!

Bottom of Sea Benchy

Bottom of the Sea Benchy have one on the mk4 printing should be done in a few hours. Seems kosher.

Passive Speaker/Amplifier Phone Stand for Bottom-Speaker Phones

Helps to amplify/redirect sound from phones with bottom-facing speakers. Edit: Updating dB stuff with new measurements and correct maths Increase is around 8-9dB for the intro to the song “Smokin'” by Boston played on my P20pro from…

Creality K1 bottom Drawer

Drawers mounted on the underside of Creality K1. It consists of a front drawer and a right-side drawer, and does not block the ventilation at the bottom.

bottom and spring for sure.t mag- nerf half dart/talon magazine

the spring is recomended to print on PETG, mag bott 2 is of a tighter fit, on my print it just snapped right in without any glue needed

Small reusable rounded bottom planter mold

I wanted a small, simple shaped concrete planter and I was inspired by some great 3d printed planter mold designs out there. This was modeled from scratch and prints without supports. I've reused the same mold multiple times without…

Geared Smartphone Holder with honeycomb bottom

I remixed SchuMaker's Smartphone Holder Design with honeycomb on the bottom part. Just filled the hole on the bottom with fusion360 and added a modifier to remove top and bottom layers.

Peachy Ass - NSFW - splendid woman naked bottom

Crochet Basket Bottoms

I made some simple thin crochet basket bottoms in openSCAD. The wood ones are nice to look at, but if something gets spilled or you want to make a basket for the bathroom, it is nice to have something water resistent. Let me know if you…

Dewalt/Stanley/Craftsman TSTAK FATMAX Versastack Organizer Nested Cups, 2 x Shallow Strorage Trays (Top & Bottom) for Deep type.

After coming across afri.mandjelikian great design for the Dewalt/Stanley/Craftsman TSTAK FATMAX Versastack Organizer Nested Cups , I needed one for storing various sized M3 Button Head Socket Bolts in. I decided it would be more…

Ender 3 S1 bottom cable guide

Remix of WojciechKawa 's Ender 3 S1 bottom cable holder , with honeycomb pattern and some other minor changes. Coupled with Ender 3 S1 X motor cable guide , the cable is parallel to the side of the printer, taking less place. Check other…

Bambu Lab X1 AMS Bottom Desiccant Holder

Printed in black ABS with support. V1 - First Publish

Festool Systainer - Bottom Mount

Festool Systainer Brackets that make it possible to fasten every T-LOC SYSTAINER upon a dolly or something similar. See top mount files here . _______ If you like my uploads buy me a coffee -> https://bit.ly/pwave-donate

Ender 3 S1 bottom cable holder

The cable holder, which exits from the bottom of the printer, is designed for those who do not want the cable to lie on the desk. IMPORTANT! Print on the side with support as I showed in the last photo otherwise it will crack on the…

Remixed Under Desk Shelf - Squared - Hex Bottom

I wanted to speed up the print time and save some material so I made the hex holes bigger.

Raspberry Pi 5 & PineberryPi HatDrive! Bottom Case

Update! While I have internet connection, I'm uploading an updated, modified, and tested version. All credit goes to @Zahg ! Huge thanks for this! =========================================== Original case needs some adjustments. Check out…

Parametric Gridfinity Bottoms (Gridfinity model base)

Always wanted to make a 30x30 Gridfinity monstrosity? Well now you can. Or make something small. You know, whatever. There is a model that includes a wall and stacking lip, just a wall, or only the base Gridfinity elements. They all abide…

Prusa Core One bottom print sheets storage

Introductions I couldn't let the prime estate under the printer go to waste, so here is a print sheet holder that mounts at the bottom and holds four print sheets. The model utilizes M3 holes in the bottom plate and uses four screws for…

Larger Bottom Insert for Rugged TS100/Pinecil/TS80 Case

Print both files from this model, the rest of the files can be used from the original model. If you have any question, feel free to contact me.

PET Bottom Cutter

Overview: I wanted to speed up the process of preparing PET bottles for making filament. One of the steps is to cut the bottom of the bottle. Using scissors is not very convenient and fast so I have designed this cutter which uses a…

Nintendo 64 Bottom Shell replacement

Step file also included for anyone who wants to tinker around with the model. I don't have a printer which fits the size of the model, so it's untested, if you do however print one yourself please let me know if it fits (and if not, I can…

Neville Longbottom Wand - Harry Potter

Neville Longbottom Wand with some support needed on 2 of the parts. I printed it at .20mm with 15 % infill, but it probably doesn't need that much. I took the original model here, decreased the amount of triangles, and split it into…

GameCube Bottom Shell 1:1 Exact Copy

This is a 1:1 recreation of the GameCube Bottom Shell top. more parts of the GameCube on the way. this is about 90% accurate but will fit OEM parts as well. I can't guarantee that a Gameboy player and modem adapter will fit since i do not…

Snapmaker U1 Bottom Tray

Snapmaker U1 Bottom Tray Front/Rear The front tray is used to discard brims and other residues, while the rear tray is designed to catch filament that occasionally falls to the bottom during multi-color printing.

Deep Leaf Bowl - Naturals Collection (Flat Bottom)

Enjoy these realistic and useful leaf trays to keep you organized and bring a little nature into your life! Scalable. Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

Spongebob Bikini Bottom Lamp

Spongebob Bikini Bottom Lamp.

"Bottom from the Sea" - splendid woman naked bottom with detailed shaped parts

RockShox Bottomless Token

I was unable to buy them, so I replicated them. Use only if necessary and at your own risk. But they work just like the original for me. The shape is a bit different due to printing without supports. You should print with more resistant…

Rope Bowl flat bottom.

Original Print Settings Standard settings will work, but they are not ideal because of the slow print time. You can drastically speed it up by adjusting the following: 0% infill 3 perimeters Turn off “Ensure Vertical Wall Thickness”…

Geometric Coasters w/Bottom

I added a bottom to the coaster of the original design, because they could still drip condensation. I also added a variant of the holder that is only for 4 coasters because I wanted an option for less coasters. In one of the photos, you…

Snapmaker U1 Feeder Bottom Feed Rotation Block

This adapter block allows for the filament feeders on the side of the Snapmaker U1 to be rotated so that the filament feeds in from the bottom and out the top. This allows for better placement of a dry box or filament spools under the…

Waffle pattern pot with thicker bottom

The bottom in the original pot can be a little flimsy, being only 1mm thick. It gets even thinner when you scale the model down, so in this version I made it roughly two times thicker. Otherwise it is identical to the original.

Several sized Organizers for drawers with hexagon walls and bottom as well as closed or open front and connector, sev

Organizers for drawers with hexagon walls and bottom as well as closed or open front and connector to keep them together. There are several sizes available, all organizers are 30mm in height. Sizes (Width x Length): 100x100 100x120…

Raspberry Pi 400 Alternate Bottom with 2.5" SSD Mount.

EDITED: 11/1/2022 - I added a one piece bottom - BOTTOMasONEpieceREVISED-STL0 . I have not tested this personally as I don't have a printer big enough to fit it. If you print it, let me know how it goes and I might be able to adjust it if…

Lian Li O11 Dynamic GPU anti-sag for bottom fans configuration

I printed it in PETG with 40% gyroid infill and 4 perimeters and he “rubber interface” in TPU 95A with 2 perimeters and 20% infill. The rubber interface is a nice touch but definetely not required. If you have a round adhesive bumper pad…

NSFW Ghost Fingers- Flat bottom

Flashforge AD5X/AD5M enclosure bottom trim

Noticed that whenever you print the enclosure your alway left with the bottom part below the door being black and not matching the rest….. So I gave quickly designed a bottom trim to go over it, I did recess some holes into it for magnets…

Vacuum Robot Ramp / Door Ramp - flat bottom

A ramp for the vacuum robot to get get over heigher door thresholds. The ramp contains dove-tail joints to connect multibel ramps without screws. You may want to use some velcro tape to the front side so you can attach the ramp safely to…

Lego Compatible (64567a.dat) Minifig Lightsaber Hilt with Slight Sloping Fingers with Bottom Ring

This model is compatible with the lego system.

Stronger bottom plate for the volume knob

I have slightly modified the bottom plate of Mikolas' awesome media control knob. It is now slightly thicker, fits more tightly and reduces the flex of the pins holding it to the body. I like it how the entire button feels much more…

F**K to Give Coin Equal Top/Bottom

Media Control | Cable clamp and bottom plate

The other bottom plates had some fragile nods to lock on the body. So I designed a stronger one, which works perfectly. Also I didn't like the huge gap for the cable to go in, so I made a modular cable clamp which locks in that hole,…

Cybex Gazelle S Bottom basket adapter

The shopping basket that comes with the stroller only fits on the top connecters, so you have to put your child on the bottom connectors when using the basket. These adapters allow you to use the connect the basket to the bottom mounds.

Tux prepared for multicolor with flat bottom

I printed it with standard PLA settings, 0.2mm layer height on a MK4S and MMU3 and without supports. The right arm/wing could need some supports, but it's in a tricky spot, so I didn't bother. There was some minor overhang drooping that I…

Creality Sonic Pad Bracket (bottom table mount)

Creality Sonic Pad Bracket to screw bottom Table. Pluggable This is the latest version of the coveted Sonic Pad table holder. Newly, a cable management system has been integrated to provide you with a neat solution for your connections.…

Bottom Flush Mount French Cleat Lock

This is my 2nd French cleat lock design to help keep your tool holders in place on your wall when you remove your tool. It requires that your tool holder sits flush with the bottom of your cleat. It's perfect for smaller or lighter tool…

Bottom Plate for Magpul PMAG Gen3

Hey Everyone, Couldn't find a Ranger-Styled bottom plate for my PMAG gen3 so i made one. Fits the .223 PMAG perfectly as FDM or SLA print. Print it standing, so the sides where it connects with the mag are extra strong. I recommend resin…