158 modeli
A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…
Update 220811: Added solid with 1deg step on request Replace the code below to this, ( BB and CC changed to 2 and 1 and replace STL to the new one ;BEFORE_LAYER_CHANGE G92 E0.0 {if layer_z>1.2}M104 S{(temperature[0]+ 2 )-( 1…
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa MK4S with and without MMU3. 17th December - Add MMU3 PETG and PLA 23th November - Fix for…
All in One Temperature & Bridging Tower - PLA MK4S GCode. Specifically sliced for the latest MK4S version with the 0.4mm high flow nozzle (HF0.4) Uses the default PrusaSlicer 0.2mm STRUCTURAL preset as that is what you will most likely be…
Test your bridging/cooling settings! Check if your bed adhesion is good enough for small footprint parts. Prints in minutes and uses less than 1 gram of filament. Category: 3D Printing Tests
A perfect model to test your printers ability to properly retract filament, and test its bridging capabilities. This is done with two small towers either side causing the printer to have to travel across the middle on each layer. If the…
Remix of Tronnic's bridging tower, with the temperatures from highest on the bottom to lowest on the top. This way, you shouldn't experience clogging issues if the lowest temperature is not enough to properly melt the filament. Many…
Since I could not find the ideal temp tower that meets my expectations, I designed my own. Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the…
With this model you can test 6 different distances: 10mm 20mm 40mm 60mm 80mm 100mm Update 1: Added a Material Saving Variant (But this Variant is more fragile)
Reinventing the wheel, yet again. The whole thing is 3 mm deep (z) and each strut is 1 mm wide and 0.8mm deep (so about four passes). The smaller one goes from 5mm to 50mm in 5mm interval; the bigger one goes to 75mm. Having trouble with…
Update: v1.9.6 10-10-25: Test cutouts on the backside are back! Somewhere around v1.8 I left a “*” character in the code while debugging that made them disappear. My “Improved All-In-One Temperature and Bridging Tower” is very popular but…
Just a quick test (about 1 hour) for testing the bridging capability of your FDM printer and its settings. Features: -bridge length: from 2cm to 10cm -bridge thickness: 2mm -thin base for better bed adhesion Advance: -you can play around…
Temperature Tower to find the correct temperature for your filament Print instruction Material: PLA Print resolution: 0,20 Bed 60°C First 10mm prints with 190°C then every 5mm the temperature increases by 5°C !warning! Watch the first few…
Brio compatible bridge set for Lego Duplo compatible pillars Description The provided STLs are for a 150mm straight rail in between and 2 Duplo brick pillars to reach Brios standard bridge height of about 60mm. Feel free to download the…
This is a completely parametric temperature tower remake from Tronnic's work (rather than a remix). I liked its basic design, but I missed the ability to tweak on parameters, and hence it is! You can: Set the temperature range and the…
Test your 3D printer's skills with 5 different bridging lengths : 50 mm 75 mm 100 mm 125 mm 150 mm Don't forget the slicer bridge setting on your slicer ! Enjoy & Share your prints with me!
This is a bridging test that won't waste loads of material and prints in 20 minutes. 2g of filament gives you about 100 bridging extrusions, each a different length, from 2 to 200mm. Print with 1 perimeter.
Temperature towers should be fast and easy. I don't want to wait for hours just for a test. This tower is shorter and narrower than most models out there and uses increments of 10C to quickly get you close to the optimal temperature for…
I had problems with the fan shroud, so I needed a directional overhang / curling test. It will test overhang at four angles (30 to 60°) in all directions for curling issues bridging at 30, 50 and 70mm arcs at 2.5, 5 and 7.5mm radius (5,…
Wanted a smaller temp tower to just fine tune Prusaments +- 10c of recommended temperature. These are PLA and PETG models. Also sliced with PrusaSlicer. 3mf model files includes custom g-code for different temperatures so you just need to…
Added bridging supports at the intersections of Doug Kremer's EXTREMELY LIGHT Gridfinity Baseplate (Parametric). This fixes the drooping seen in the 3rd picture. For the Fusion360 file, change the size of the grid with: Update Row and…
Longer bridging test pieces to test out the limits of your machine. Dialing in just the right bridging settings can reduce the need for support structures in 3D prints and thus reduce print time and material use. Keep in mind that the…
Saw a video regarding the perfect bridging printing of the mushroom basket from @akakikuu... This inspired me to design a bridging test model... That is how I came out with this "bridging statue"... By rotating this bridging statue... you…
There are so many bridging test models out there already - why did I make another one? I couldn't find one that met all these criteria: The model should test bridging in both X and Y directions, testing each axis with the same range of…
A small bridging test with very little material
https://www.thingiverse.com/thing:3830316 presented a project to adjust Purging Volumes and provide smaller wipe towers with less waste. jltx did a great job on explaining how to use the tool. I also wanted a tool to test my bridging…
I've been using @Maker Mashup's nozzle brush for a while, and recently I saw @Extra Fox's remix of it. I liked the smaller size of the head but I didn't care for the repositioning of the handle to the side or the rounded handle that lost…
I've created variants for 0.2 and 0.3 mm layer height. 0.2 mm version is sliced at 3.22 grams. 0.3 mm version is sliced at 4.06 grams. The original BridgingTestMaterialSaving.3mf is sliced at 5.47 grams. There are four layers above the…
I've made a simple Bridging Test. 1st Bridge 18mm, 2nd 28mm, 3rd 38mm, 4th 48mm, 5th 58mm, 6th 68mm.
Use this to test and dial in various bridging settings.
This is a double helix bridging torture test. you can scale it up or down to increase the length of the bridge. you can also filament swap to test bridging capabilities of multiple filaments in one print! designed in fusion 360 featured a…
This is a test to see how far your bridging can go. The numbers do not show on a 0.4mm nozzle. If using it, I would keep a careful eye on your print, as it could turn to string by the end when the bridging starts to fail (Mine made the…
I really liked the concept of a relative temperature tower that supports any material, but I also wanted to be able to change the layer height/nozzle size easily, so I rewrote the layer change G-code to be layer-independent.…
This cute little calibration cube-variant can be printed in ~20 minutes and provides a bed adhesion, bridging, and dimensional accuracy test. Plus, they stack and make for great filament swatches! Each side of the main cube is 20mm. The…
Quick way to test your bridging capabilities and re-calibrate/tune your printer in minutes. Say NO to fancy complex models that take 30+ minutes to print, this one prints in 5 minutes!
The problem I had is that the supports didn't allow for a surface finish that I liked. This Model has integral supports, that need to be popped off when the print is done. Before assembly. I optimized the design for printing in a specific…
I wanted to have nice connectors for the extension of my MK3's PSU cables without having to tear down the entire cable harness. Since there were no proper screwing terminal blocks available out there, I did it maker style and designed my…
Temp Tower for C1L
This tower allows you to test different temperatures in your printer! You can test 30º and 45º angles, bridging and curvature. You can use the PETG designed tower to test PETG, or the blank one to test any material. Printing a temperature…
Test the bridging on your 3D printer with this DNA Double Helix model! The long bridges are in alternate directions so you can check your cooling in every direction. I used the original version of this model to test my Positron , and I…
Small = 20mm bridges, Large = 40mm bridges. Print in .20mm layers. Benchmark overhang test for 3D printers.
This is basically an inverted standard calibration cube, and prints in about the same amount of time. But this one is hollow to test retraction, overhang angles, and an insanely difficult bridge at the top. The cube measures 20x20x20mm…
Created this small cube that should be 20x20x20mm to test stringing + bridging capacity. Quick and use little materials. It also pairs as a fun optical illusion.
Introduction There has been some great work on the optimization of the part cooling and I wanted to provide some form of standardization to the testing process. This will help you compare the results of different printer configurations…
I needed to test a filament which has a higher specified temperature range than the available temperature towers, so I used Parametric temperature & bridging tower + G-Code generator to create a custom temperature tower that went up to my…
Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the layer adhesion by breaking it - A bridge, from 30mm length in the back to 35mm in the front -…
Zach made some awesome caliper holders, but the hole for the magnet cannot be printed without major drooping and it's unusable without post-processing. I used a version of this “3D Print floating holes without support” to fix the bridging…
Just press print and you will see whether your printer is good at bridging or not. No supports (obviously).
This model prints bridges of length 1cm, 2.5cm, 5cm, 7.5cm, 10cm, 15cm, and 20cm. While bridging 20cm is challenging, you can play around with various settings and compare the outcome. The two circles ensure proper bed adhesion.
Test your printer and filament with this bridging test model The model tests bridging at 7 different lengths including: 5 mm 10 mm 20 mm 40 mm 60 mm 80 mm 100 mm The bridges are 1.40 mm thick Print settings I recommend 100% infill. 0.2mm…
Remix to add a PC tower
A simple test for bringing and stringing performance. It is very fast and costless in terms of filament. About 4g of filament and 15-20m test, you can obviously scale it in the slicer if you wanna. I needed a fast test for a fast tweaking…
This allows you to fine tune your bridging settings and to see what your limit is.
This test can help you to find the best settings for your models.
a multi process tower to test retraction settings for each filament. Simply align the 6 stl files on top of each other and test different retraction settings for each stl :) watch my video to find out more: https://youtu.be/zJ9oxCkMkxk…
This is something I whipped up in Inventor Fusion this morning, and I like it. The 2 smaller versions are likely the only ones that are possible, so if you try the huge one and it fails, that's your fault :P I'd try to make the large one…
This all-in-one 3D printer calibration test is designed to evaluate and improve your FDM printer performance quickly and accurately. The model includes advanced tests for bridging, overhangs, dimensional accuracy, tolerances, bed…
Just wanted a simple bridging test to tweak my settings and not waste a lot of filament. Category: 3D Printing
Short Introduction VIDEO for the unofficial Drag Race. Are you needed to work on your bridging settings? Are you sick of using the same small feature of a model to print? This is a test you need! Three tests in all for .4 .6 and .8…
I really liked the Modular Gridfinity Drawers ( https://www.printables.com/model/402298-modular-gridfinity-drawers ) by Travis Houston https://www.printables.com/@TravisHouston_483368 but I wasn't happy with how much bridging it took to…
A simple bridge model that can be used to test your printer's bridging capabilities. The model is printed on its side and the suspension cables are printed via bridging. Print without supports.
90 Degree Overhang and Bridging Test Model for Arc Overhangs
This model includes several testing features to tweak your printer and understand its capabilities. Bridging The model tests bridging from 20mm to 90mm Angled overhangs On the side of the model, you can find overhangs at several different…
It's awful, do not print. There are better models out there. Edit: Maybe it's not that bad, after I've read the comments. Try it.
You may want to rotate the print 45 degrees on your build plate so that the part cooling is not biased I recommend using 125% bridging flow, and disabling thick bridges disable slow down for overhangs in global settings turn on forced…
Bridging Test Just a simple and fast print to get your bridging settings dialed in. I uploaded the Fusion 360 model so that you can modify the model parameters on your own. CURA workflow: import the model in Cura. use the “per model…
The bridging area of the model was pulled 0.2mm forwards so that the bridging would be 2 lines. This not only added a layer of solid infill to strengthen that area but also changed how prusaslicer (and other Slic3r derivatives;…
Introducing the infamous Grumpy Cloud, who always seems to bring the rain with him! Watch the video above to experience the soothing sound of the rainstick in action. To create a non-stop rainstorm, simply rotate the rainstick in this…
You can test the bridging settings of your 3D printer with this model.
Overhangs, bridging and holes
I've made these small temperature tower models so they can be printed relatively quickly in about 30 mins. Each model has 9 levels in 5 °C increments and a range of 40 °C. They range from 190-230 °C (suitable for most PLA filaments) to…
USE BRIMS - SLOW DOWN AS YOU GO HIGHER - MAY POP OFF PRINT BED Based on earlier learning with Air Trees https://www.printables.com/model/340401-air-trees-easy I wanted to see what was possible at the upper end of the technique. Recently I…
Remixed the wonderful 10 Minute Mini Calibration Test for Oozing/Retraction at Different Distances by MrTestOne to also add bridging on the last layers. This probably takes more than 10 minutes now to build, but may be useful for some.
A relatively simple model that can be used as an effective and cool bridging test. It shouldn't be very difficult to print if your cooling and speeds are well tuned. The wires should be 2 layers high and 1 nozzle width. Because…
This bridging test is fast and requires minimal material check out my page for an all-IN ONE-test print MINI- All-in-one test MINI - https://www.printables.com/model/825305-all-in-one-mini-3d-printer-test The Ultimate Stringing test -…
Bed - Overhang - Bridging - Top layer Test for delta printers, but can be used for all kind of printers.
Slice at 0.20mm layer height in your favorite slicer with your settings. Feel free to try and tweak your settings for best performance!
10mm x 10mm x 10mm Calibration Cube including bridges from 1mm to 8.4mm and overhangs from 10deg to 70deg. Designed in OnShape. Should also help you calibrate your flow settings as the walls are mostly 0.8mm and then 0.4mm at the top.…
Minimal Bridging and Stringing Test. Tune your Slicer settings for the best results. Print this testobject in less than 10 minutes.
Added a bridge at the top. For bridging testing. You get it.
Here is a design that I came up with to test different fan shrouds on my Duplicator i3. Lots of cooling will improve this print dramatically. I am printing in PLA. Layer height .2mm Category: 3D Printing Tests
Just a quick printer test I made. I was tired of the majority of tests taking up to an hour to print. This design only takes 15-20 minutes on my CR-10S.
Purpose of the Model Parametric temp tower for temperature tests, stringing, and bridging. Similar to models by Extrutim and the fixed version of FlorinB . Rebuilt from scratch in FreeCAD 1.1.1. Requirements To create your specific temp…
Another in my series for makers to earn achievements for their dedication to 3D printing. Model prints with no supports and with 10% infill. Optional panels are included if you want to print brown/wood covers for the model base. This…
This Nozzle brush is has the head flipped so there is no need for any support or bridging. I also shortened it to 13.5cm so it fit in the Ender 3 storage drawers. It's a remix of a remix since most of the work was already done. I Just…
A unique way to test the bridging capabilities of your 3D printer. How much the cheese droops down depends on your flow rate. Prints best in PLA or PETG. Happy Printing! :)
Efficient storage begins with small details. The Disk serves as an airflow distributor inside any standard vacuum storage bag — allowing air to be extracted evenly and the bag to compress smoothly without damaging the contents. Simply…
These objects test your printer's ability to bridge long distances. The two provided objects test bridging over 150mm and 200mm gaps. If you can bridge the 200mm gap, you're doing well. The above photos are ABS, printed with a .4mm…
A super long bridging test
Simple test print to print bridges from 1cm to 11cm in 1cm increments. On my Prusa Mk4S, the last few are imperfect but usable. (See photo). OpenSCAD file included to make your own versions.
Have you ever had problems removing your prints from the printbed? Well, this tool i created will help you remove prints easier. How to use? Simple, insert the scraper in it's holder as in the photos. After your print is done, let your…
Tennis Racquet Bridging Test Few things to note: Racquet_Handle.stl should be printed with a small brim to prevent it from falling over Nozzle width must be .4mm and height must be .2mm to correctly print the strings on Racquet_Head.stl…
The original model was 1/3 too big (e.g. 15mm instead of 10 for the first bridging test).
I've seen a few ideas like this floating around but they either require assembly, bridging, and/or support. I'm also, not a fan of unnecessary vertical curves. I printed in PLA, 4 walls, and 20% cubic. The color change is just me getting…
Added sacrificial bridging to make the unsupported pattern near the top easier to print without supports. Just need post-processing to trim away the four bits of bridging.
A simple test for testing bridging and stringing which I made in Tinkercad. Enjoy! UPDATE- I uploaded a new file : Bridging & Stringing Test V2 This file is an updated version of the previous one. I changed it so that it will take less…
This is a Bridging Test ranging from 5-100mm.
