310 modeli
This is a bulkhead fitting for connecting flexible hoses to containers. It is designed to allow for easy drainage, since the existing parts I found available didn't allow for good drainage due to surface tension around the inlet. You…
Wydruk około 1,37 €–1,67 € nettoWstępna wycena jednego wariantu
Made to be attached to a desk/table/shelf between 2.5 and 2 cm thick. I printed it in 0.20 but I guess it is possible to print it in 0.30 and still make the screw work.
Wydruk około 3,18 €–3,88 € nettoWstępna wycena jednego wariantu
Bulkhead inlet mount for 2 SO-239 Connectors with the flanges. making this for a friend who was putting his HF radio into one of those black plastic Harbor Freight Tools brand protective carry suitcase.…
Wydruk około 1,01 €–1,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The weak point of the Team Losi Racing 22x4 4WD buggy has always seemed to be the front gearbox/bulkhead, often breaking to leave the shock towers ‘floating’ above, and the repair is not quick during a race event. These simple braces act…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
tabulku s nápisem doporučuji tisknout v PETG pro venkovní použití, vrchní vrstva je bílá 1,5 mm potom černá PETG pro viditelnost . Zkontrolovat čistotu bílého vlákna, možnost přenesení zbytku barvy z předešlého tisku .
Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cílem projektu je, aby si žáci vytiskly bezpečnostní tabulku k označení daného nebezpečí, příkazu, nebo zákazu. Tabulka má více barev díky změně barvy ve vrstvách.
Wydruk około 0,39 €–0,47 € nettoWstępna wycena jednego wariantu
Overview Sick of loose screws rolling off your workbench or half-used resin bottles cluttering your space? DriftJug is here to bring order to the chaos! This versatile 3L container keeps bulk materials sealed, organized, and—best of…
Wydruk około 10,74 €–13,13 € nettoWstępna wycena jednego wariantu
tabulka dny malá
Wydruk około 1,33 €–1,63 € nettoWstępna wycena jednego wariantu
Žáci navrhnou a vytvoří informační tabulky na označení tříd podle vlastních představ, které následně vymodelují a po vytištění umístí na dveře
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
tabulka dny
Wydruk około 2,89 €–3,54 € nettoWstępna wycena jednego wariantu
Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…
All the Allen key storage model are one of each size, but I have too many sets with missing pieces accumulated over the years. First time 3D modelling and sharing, attached STP file which is supported in Bambu Studio and allow easy…
Here are some 22LR storage boxes and trays. These are designed to be able to arrange large amounts of bulk 22LR ammo into either a 50Cal or 30Cal standard ammo boxes. I designed one model so that three boxes and 15 trays can be stored in…
A quick a simple storage box for you bulk Pokemon cards. You should be able to fit around 500 cards in this container. Once filled, they wont shake around or move about.
Designed to store 10 sizes of drills in bulk quantities, lengths were tuned for the Screwfix Erbauer 1-6mm trade pack of drills size. That pack includes the following size drills: Drill Diameter (mm) Drill length (mm) Compartment length*…
Changes I made the bigger on longer and changed the inner radius on both. The large holder has the sizes 6, 8 and 10 The smaller one has the sizes 1, 1.5, 2, 2.5, 3, 4 and 5 Pringing Nothing special, except, maybe make a color change…
This is the bulkhead fitting needed to install a valve in the wall of a rain barrel. While commercial fittings are available, they can be expensive. The ID of the fitting is sized for a ½" pipe thread valve (very common in the US). The OD…
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings. My own original work designed to be compatible with BattleTech and…
Note: I wanted to create some modern-ish shoulder armor for cosplay and started with some Helldivers armor as base. As i progressed with prototyping i felt like it wasnt quite to my liking in how it looks, but still wanted to publish it…
I had quite a assortment of spare drills 1-10 I had all in separate boxes per size. As I do some metalworking in stainless steel sometimes drills tend to be braking and it nice to have them fast when I brake one from my main set to…
This is a cable clip attachment to the standard iPhone USB-C charger I've been using the original Cable Organizer Clip by user "magicxman" on Thingiverse (https://www.thingiverse.com/thing:46600), for many years now. Just recently, I have…
Functional bulkhead and cap model that doubles as fidget toy, or workspace decor. Ideally printed without supports. Can be used functionally when printed with appropriate material like ABS, the gaskets should also be printed in TPU or…
Description This is a Gridfinity Bin used to organize all of your loose hex Allen key wrenches. Each slot can hold several keys of each size. It also has a built in gauge so you can easily identify the size of the wrench before you put it…
A PTFE Bulkhead to cover the PTFE entry slot and not put any additional stress on the PTFE lines uses 8 - PC4-M10 Fittings and 2 - m3x10mm thread cutting screws (steal 2 from the top of your enclosure)
Didn't like the OG USB holder. Simple design to hold multiple USB drives for the honeycomb storage wall. Uses the M5 nut insert. There are two models. One is just for USB drives that holdand 20 drives and one I made as a specific use case…
Manpack Rail System for RT95/AT-778UV – 3D Printable File Hey everyone, I’m excited to share my latest 3D design—the Manpack Rail System for the RT95/AT-778UV ! As a passionate Ham radio operator and off-roading enthusiast , I wanted a…
Rxunique has this excellent Gridfinity allen key bulk storage, but it only has 3x2 size or 6x4 size.. I need a 4x3 size one so here it is.. stackable, holds a lot of allen wrench in the slots, and there are also overflow area to keep…
Back nut that is suitable for Foster and PCP bulkhead connectors. Specification: 1/8 NPT thread 3/8" diameter thread 6.4mm nut height 15.8mm nut outer diameter Print high infill, no supports required 0.1 layer height, but works on 0.2…
Here are some 9mm x 19mm Parabellum storage boxes and trays. These are designed to be able to arrange large amounts of bulk 9mm ammo into either a 50Cal or 30Cal standard ammo boxes. I designed one model so that three boxes and 12 trays…
Easy to print, with tree supports
A Buld/Card holder for pokemon tcg it has room for about 400 cards.
WIP ! WATCH THIS THING in case of updates. This is my version of the 1995 bulkheads that were designed for Necromunda (but re-used in latter boxed sets). They were designed to work with cardboard pieces to create platforms, catwalks and…
Low profile "bulkhead" style screw in place vents for terrariums/vivariums. The mesh features 1.2 mm holes with 0.8 mm ribbing. Both the insert and nut have M28 threading with wide tolerances for easy printing. The low profile design is…
Tool to pass the seams with your sewing machine
This lets you make a connection from a 1/2" poly hose to a tank. Instructions You'll need to add a garden hose washer so that it won't leak. Print it with a 100% infill, otherwise the bottom of the connector may break off as you tighten…
A Gunderson-style straight taper bulkhead. I designed them to slide onto the ends of an LGB long(54' in 1:29) flat and snap in place. They fit best if the top of the stirrup detail is shaved off. Ladder, Grabs and Brake parts best printed…
Printed with CF-Nylon or ASA vor high strength. For 25mm inner diameter tube / Für Schläuche mit 25mm Innendurchmesser. Printer Settings: Printer: Creality Ender 2 Infill: 100% Supports: No Raft: / / Speed: slow 25mm/s Material: ESun EPA-CF
This is an Anderson Powerpole connector designed to take two sets of connectors. It can be used for passing through a bulkhead up to 20mm thick. Includes Nut. This is the final competed model Fixes from previous models: Thread depth…
I design those poop chutes in 2 types : slim ( to leave a TPU spool on the back of the X1C )and bulky ( if don't want to hold any kind of spool on the back ) , thats your choise. If you print the slim design it will NEVER touch the…
Generic filament bulkhead for building a dry box. Inspired by the many variants available on Thingiverse , I wanted a simple bulkhead to guide my 1.75mm filament out of my dry box. I came up with a few variants while experimenting with…
Bulkheads and Double-stakes to convert my LGB 53' flat cars to pulpwood cars. Designed for printing with an SLA (resin) printer. I've included Chitubox project files that I used to successfully print on My Elegoo Mars printer. Yeah, I…
This is for XT60 bulkhead connector, it allows to mount the connector inset into the trim. You can glue it to your surface or use sealant to mount it with screws.
If you have a Bulkman3D Ultimate Bee and want to upgrade from mechanical limit switches to significantly more reliable and accurate induction proximity limit switches, here are mounts that I designed to use factory bolt locations. Using…
General The 25mm version is compatible with 1 inch cable grommets as shown in the picture below as well as M25 cable glands. But you can use the blank plate to remix your own version if you have different needs for your car 😄 The gasket…
Bulkhead fitting for filament dry box, using the magnetic joiner concept. requires a 12mm hole, 5mmx3mm magnets, qty 6 per bulkhead fitting and cover, available from Amazon : 5mm dia x 3mm thick N42 Neodymium...…
This is just a simple bulkhead for passing a 1/2' PVC pipe through a thin flat surface like the bottom of a bucket.
Adapter na 3/4" hadici, šroubovací průchodka M36 Vrtám díru 40mm, tloušťka stěny nádrže je cca 3mm. Doplnit ploché těsnění s vnější strany , závit netěsní na 100%. Z vnitřní strany není nutné těsnit. Hadici před nasazením nahřát, aby…
ID Card holder based on a classic and proven design many may be familiar with being issued within the DoD contractor fields. But sometimes getting ahold of one could be difficult. I'm listing the base version for free with lots of…
Gridfinity Allen key bulk storage fits from size 1 to 6 2x4 5U - stackable
While this is registered a s a remix, it is actually a completely new set of models with STEP files included. There are two versions. The threaded version is designed for use with standard g 1/4 fittings for water cooling. The three small…
Updated to have better socket retention and more solid clip engagement. This is an ATX 24 pin bulkhead pass through for the Thermaltake Tower 900 case. For securing ATX 24 extension cables. The rubber grommets from the Tower 900 case can…
Keyrambit using 6803ZZ bearing
A niche design for cable bulkheads or glands, for those cables with large molded connectors. It's base size works on HDMI cables, and can be scaled for a range of sizes (I've tried 60 up to 110%) The flat part of the cores may need to be…
Here are some 5.56mmx45mm NATO (or 223 Remington)storage boxes and trays. These are designed to be able to arrange large amounts of bulk 5.56mmx45mm NATO ammo into either a 50Cal or 30Cal standard ammo boxes. I designed one model so that…
I needed fittings to pass wiring through the bulkhead on my printer controller case. I came up with these 5mm and 7mm fittings. I printed mine at high resolution (0.15mm) on a Malyan M200 using Solutec PLA at 205C on a 60C heated bed…
Fixes from previous models: Thread depth increased for improved thread definition. Thread changed to standard right hand thread (earlier prototype was accidentally made with left hand thread) Thread width: 25mm Body: 23mm Flange: 35mm…
This is a grommet insert giving you a bulkhead that will accept two 8-pin ATX power connectors. Either EPS/CPU or PCIe are compatible. This secures the cable and gives it a very clean look. The design allows you to run extensions from…
At my work, students need to have access to usbs, but rather than laying them down in a bin, I created a few solutions. V1 is from a years or two ago, created in Tinkercad and only holds 32 USBs vertically. V2 is a design I recently made,…
A new man has arrived in town for you to pose and play. it's very stick like so it doesn't take long to print ( Post a comment if you want me to make it less stick like). Post makes of your new amazing figure.
Made this Gridfinity to hold Bambu scraper, amazon plastic scraper with replacement blades, and misc 1.5mm 2mm Bambu allen key
If you have a 9 mm bulky knitting machine and lack needle pushers, then you need these. I designed these to be simple and quick to print. So far I have the following combinations: 1 x 1 2 x 2 and 3 x 3 2 x 1 and 1 x 2 3 x 1 and 3 x 1 4 x…
A shorter height version of the allen key bulk storage
As the original Tamiya parts seem to be unobtainable in Europe at the moment I designed this parts for my Daughters DT-02 Nissan Titan RC Stadium Truck. It is a direct replacement and seems very strong when printed with 4 outer layers in…
Allows you to create a watertight (when using gasket/o-ring) seal to a rain barrel or bucket which allows you to connect 1/2" propylene tubing for overflow or tap. I used PETG and “99” walls to print it to help prevent any leaking. I used…
Classic Bulk Brick Block 2x4 Compatible with Lego Parts and Pieces
Cap for SuperTrickler bulk tube. Has a plug that extends in to tube, and a knurled section for easy grip.
I needed a 4in duct fitting after installing my AC Infinity AC unit as there were no more pre installed holes. This worked great. I used 5mm brass inserts in the plate. printed with the shorter length down with supports. The nut plate…
For use to bulk load 12ga shells in a 30cal ammo can Print instructions prints best on the side. print the base at 10% infill and the spacers can done with 3 walls and 0% infill
This bulkhead lets you embed a USB-C PD Fixtured Voltage Module inside of itself allowing you to use a USB-C charger at a fixed voltage based off the type of voltage module you purchase. Simply take the module and place it inside of the…
A simple bulkhead/passthrough model for PC4 1/8" BSP compression fittings. The hole in the nut is sized appropriately for a 1/8" BSP tap, though you may be able to get things to work with a 10x1mm. These fittings are pretty much always…
Scanning film with the Plustec scanner always took me a bit too much time, which led to some rolls sitting on my desk for months, waiting to get digitized. I figured that most of the time is spent cutting and loading the film into the…
3mm panel x 4mm bowden tube. 10.5mm minimum to 12mm maximum hole diameter required in panel Print instructions .2 resolution .3 initial layer height, Printed in PETG 15% infill, no supports. Collet cone points up, Collet Nut Cone Prints…
Simple bulkhead lamp for models. This light fixture is about 30.2x15.2x11 mm in size, and therefore roughly scale 1:8. Made for two 5mm LEDs, you might need to sand the top of the LED to have it fully seated. Picture shows an XT-60…
i came here looking for exactly this and didnt find it, so as per usual here it is. For either myself in the past, or anyone who already as a bunch of 8" long sideways boxes like i do. if you want it for bigger sleeves a scale up by a few…
MK4SMMU3 PETG Filament used 131.2 g / 42.95 m / 103.31 cm³ 0.4 mm 0.2 mm Infill density 15% Support material yes rotate base diagonaly as on picture Experimental Version 2.1 - 400ft-100ft BASE ONLY Version 2.0 without sidewalls Version…
The AD5X partition, passing through a through-wall made of PTFE with a 45-degree rotation. Displacement of the tubes in the middle of the part. added a sleeve inside the case/ PC4-M10 pneumatic fittings are used print vertical thread
Bulkhead for my formicarium for 11mm tube Print Settings Printer: Creality Ender 3 Rafts: No Supports: No Resolution: 0,12 Infill: 10% Category: Hobby
I wanted an external USB connection for my Hiker Trailer to power some awning lighting, but no one makes what I was looking for. This was printed with Prusament PC Blend and NinjaFlex Chinchilla. The design is similar in appearance to…
I Adjusted the file so the the part connecting the arms to the body would be closer to the main parts of the file because I would have problems with the pieces out side of my print bed. It may take a while to print but this is a great file.
I designed this wall/bulkhead mounted shelf or tray to hold my reading glasses in my boat but it could equally be used at home or workshop. I fitted it below deck but there is no reason it couldn't be above deck as I have included a drain…
These are based in my 50Cal and 30Cal Ammo can boxes and tray organizer system.
Here are some 45 AUTO (ACP) storage boxes and trays. These are designed to be able to arrange large amounts of bulk ammo into either a 50Cal, 30Cal, or PA108 standard ammo boxes. I designed one model so that three boxes can fit either the…
Files will print a ship's clock case that will accommodate an inexpensive quartz movement available from Klockit or Amazon. Included are multiple spacer and shim options for different clock shaft lengths. The clock face requires a…
Here are some 7.62mmx51mm NATO (or 308 Winchester) storage boxes and trays. These are designed to be able to arrange large amounts of bulk 7.62x51mm NATO ammo into either a 50Cal or 30Cal standard ammo boxes. I designed one model so that…
Just a little project I made a few weeks ago. I found the template in the vastness of the internet and modeled it in Fusion360. Print the “Handcover Pin 3x” 3 times. I'm always open for suggestions to improve my coming models, so feel…
Originally designed for a Startech.com 6U wall mount server rack. But should work with their entire line of wall mount server rack products. It's a two piece design. You can installed the CAT 6 terminated or unterminated it doesn't…
This is an updated version of the following thing: https://www.thingiverse.com/thing:1478706 which held roughly 6-7 cards. I often found myself and my coworker running out of cards during large events. The improved version highlights…
Bulkhead for adding a blow-off tube or bunge to any plastic surface such as the lid for a five gallon bucket. I didn't find anything like this online and I needed it for the top of a blowoff bucket that I was making. It would work as the…
This is an alternative bucket mount for the patio strawberry hydroponic planter. Requires 6 M6x1x30mm bolts and washers. This is in 2 parts. There is a under lid ring, and a top ring and adapter.
Western Maryland used these bulk containers in gondolas to transport dry materials like dolomite. These will fit in an Aristocraft Gondola, they usually hauled 8 (4 at each end) or 10 (two more in the middle) in a gondola. PRR also used a…
Small hooks i used to tie plants to the wall and to the ceiling. Can be used for cables as well.
This is intended for mounting under an RV / camper trailer, screwing it to the underside of the electronics bay, providing a good place to mount a RJ45 through bulkhead mount. This provides a weatherproof connection point to bring…
Bulkhead fitting contoured to the shape of a 4" PVC tube for a better water seal. Will update the description with the o-ring sizes that I used. My other 4" PVC pipe designs: Hydroponics 4" pipe clamp for use with 3mm paracord Hydroponics…
After some brainstorming and wanted a alternative for a bulkhead i came up with this diy bulkhead this should be as efficient as a normal bulkhead though using existing pvc couplers since bulkheads are not available where i live this…
Use the notched connectors to prevent rotation. Include single and double connector versions. Double version comes with a short mount. Secure with a piece of filament: align the connector with the face of the print, make sure the…
I wanted a simple bulk box that printed easy and lets you easily grab cards out of it. I also made it fit snugly in the standard beginner boxes (like avatar, foundations, etc.).
I've resized the hole to fit a standard 4mm PTFE tube. I don't like the noise or scratching sound when the filament slides through the original hole.
UPDATE NOTE 12/18/2025: The initially uploaded model had a misplaced retention pin hole. It could be used, but was not optimally placed with regard to the retension ribs. The 12/18/2025 upload corrects that issue. Please note the pin hole…
Update: Changed file format from .f3d to .stl and rounded off the top edge of the knob. My loader's crank broke off, so I designed this super simple part that is easy to print and works well. One M3x10 screw is needed to fasten the knob…
![Bulky Shoulder Armor + Clip for Attachments [Unpolished]](https://media.printables.com/media/prints/894836/images/6928491_7c419462-5c7c-43cf-91ee-5a081637d2c3_3d6ae363-f47c-4261-a85d-413b03bba5c4/armorcutup.png)
