Wyniki wyszukiwania: c64

Sortowanie

141 modeli

P
Printableswikallen

Ultimate64 C64 and Breadbin User Port Trim

I/O trim plate to for the user port area of Commodore 64 using the Ultimate 64 main board. This slides into the case before sliding the board into it. No modifications or screws needed to hold it into place. I have version 1.2 of the U64,…

Pobrania
328
Polubienia
34
Ocena
4,8
P
PrintablesGoodwell

SD2IEC for FaszinationC64 #2030 #2031

Use the screws of the display to fix the case to the module. The holes for the screws have to be drilled by you, but they are marked and can be found easily. Holes left by the printer would result in a messy print (at least for FDM).…

Pobrania
225
Polubienia
6
Ocena
0
P
PrintablesAchim

International Karate Figures ( C64 / 8-bit )

International Karate Figures The iconic 8-bit player characters from International Karate . Based on the Commodore 64 version. BONUS: The impartial referee is also available. :-) Category: Video Games

Pobrania
218
Polubienia
68
Ocena
0
P
Printablesiinnrr

C64 Ultimate / Elite 2 - User Port Combo Adapter (2026 version)

This is the 2026 update of my enclosure design for the Ultimate series (C6U/Ultimate Elite 2) User Port expansion. (Black or White PCB) I also took the opportunity to redesign the mounting mechanism. The previous version could come loose…

Pobrania
212
Polubienia
13
Ocena
0
P
Printablesplacidcasual

C64 commodore 64 PSU power supply case

This is my 1st design I haven't worked out the best way to print this, Any help post in the comments. Thanks edit added a version 2 with thicker walls edit 19/10/19 added a version 4 with a curved inside top so able to print the right…

Pobrania
204
Polubienia
19
Ocena
5
P
PrintablesDiaver

Wall Mount for CaDA C64005w Alfa Romeo F1

Vertical wall mount for a CaDA C64005w Alfa Romeo F1

Pobrania
188
Polubienia
14
Ocena
5
P
PrintablesGareth79

Shimano Di2 battery mount/shim for Colnago C64

This is a battery mount/shim to fit a Di2 battery in the seatpost of a Colnago C64. The wall thickness of mine is quite variable and there are seams, so I made two versions to test the fit, and have uploaded both. What also might work is…

Pobrania
164
Polubienia
11
Ocena
5
P
PrintablesMatt3o

Retrodeck 65 - C64 inspired keyboard

I've designed a case inspired by the Commodore64 in onShape. It's tailored to the components that I had but the original model is available here and I'm including all the STEP files so you should be able to make the modifications you…

Pobrania
143
Polubienia
27
Ocena
0
P
PrintablesRoLL

C64 Breadbin Case Fixing Part Set

All you need to bring back your C64 breadbin case in a neet conditions

Pobrania
130
Polubienia
19
Ocena
5
P
PrintablesShred

Commodore C64 Ultimate II+ Tape Adapter Case

The Ultimate II+ Cartridge by Gideon's Logic has an optional Tape Adapter. Unfortunately the adapter does not come with a beautiful case. I looked for case models, but found none that I liked or that could be printed without supports.…

Pobrania
129
Polubienia
14
Ocena
5
P
Printableswikallen

DB9 Joystick Port Cover C64, Atari, C128, Vic20

Cover for the 9pin Joystick ports on the C64. Could glue in bit of antistatic foam for tighter fit if needed. I tested this on a C64 breadbin and the Ultimate64. Print Settings Printer Brand: Prusa Printer: I3 MK3S Resolution: .20 Infill:…

Pobrania
125
Polubienia
10
Ocena
5
P
PrintablesCYUL

Competition Pro C64 Joystick with flange and strain relief

Another remix of the brilliant Competition Pro Joystick by maciek717 . This one does not suffer from the deformation other remixes have. I am using these uxcell Rubber Strain Relief Cord Boot Protector Sleeve Hose 34x9x6mm 10pcs that I…

Pobrania
125
Polubienia
15
Ocena
0
P
PrintablesBigby

C64 User Port Cap Classic

This is a remake of the classic caps for user port board-edge connectors of the Commodore home computers. Each cap consist of a top and a bottom part with additional mounting holes. There are four variants with different openings for the…

Pobrania
119
Polubienia
15
Ocena
0

C64 Case Clip

I remixed the excellent Vic20 clip from Ken into something I have been using to repair a lot of Commodore 64's on my YouTube Channel More Fun Making It.

Pobrania
118
Polubienia
8
Ocena
0
P
Printablesb--rian

Commodore C64 key chain fob

Commissioned work for a retro fan. A (modified) C64 logo as key chain fob.

Pobrania
115
Polubienia
8
Ocena
0
P
PrintablesBigby

Edge Connector Keying Insert (C64 User Port)

These inserts can be used to key edge connectors like those required on the user port or cassette port of the Commodore 64. Properly keyed connectors will fit the correct way only and can no longer be reversed accidentally. The dimensions…

Pobrania
113
Polubienia
21
Ocena
5
P
Printablesdukestah

2 C64 stack mount

I was looking for a way to stack 2 C64s without building a rack or so. I came up with this, eventually. The lower C64 can be moved forth and back a bit to adjust the position to personal needs. I may create another version that can be…

Pobrania
110
Polubienia
17
Ocena
5
P
Printablesaeberbach

Digital Joystick (Amiga, C64, Atari etc)

I had some parts spare so made a housing for it. Joystick is a Sanwa style. The flat round dust cap for the stick fits into a recess in the top housing and is fitted before the stick is mounted. The sleeve and ball are attached from the…

Pobrania
107
Polubienia
18
Ocena
0
P
Printablesiinnrr

C64 Ultimate / Elite 2 - Tape to User Port Adapter (2026 Version)

This is the 2026 update of my Enclosure design for the Ultimate series (C6U/ Ultimate Elite 2) User port expansion. (Black or White PCB) It attaches directly to the Tape port for a nice clean look. I would very much like to thank @FrankWL…

Pobrania
100
Polubienia
15
Ocena
4,5

HCG Cartridge case fro C64 / C128

The cartridge case all inclusive! PCB holders sized to be compatible with the commodore cartridges. Single screw hole. Tooth to prevent wrong insertion in the Commodore expansion port. Easy to print and to use, NO rafts required, no…

Pobrania
94
Polubienia
7
Ocena
0
P
Printableshag

C64 Cartridge Holder / Organizer

A simple cartridge holder / organizer for Commodore 64 cartridges. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Filament: Generic PLA Category: Organization

Pobrania
91
Polubienia
13
Ocena
0
P
PrintablesOsfald

Commodore 64 C64 Ultimate II+ Cart Tape Adapter Housing Case

This is my proposition of housing of the tape adapter of Ultimate II+ cartridge for Commodore 64. In my version many details have been changed and improved. Take a look on the attached pictures. To mount PCB inside the housing first you…

Pobrania
91
Polubienia
10
Ocena
0
P
PrintablesSchorsch3000

C64 Ultimate side plate

The C64 Ultimate comes with a transparend site pannel, no matter what version you get. While i think it looks great with the starlight edition, it looks way off on the basic beige, so i created a 3D-printable model. And while i'm at it i…

Pobrania
85
Polubienia
5
Ocena
0
P
PrintablesOsfald

Commodore C64 Magic Desk cartridge housing case

Next of the C64 cartridge's housings collection. This time I designed case for Magic Desk cartridge by 8bitchip.info. The case can take an IC in a socket, up to 10mm high. In the slicing software I added a decorative strip to the case but…

Pobrania
84
Polubienia
7
Ocena
0
P
Printables3d_bastelheini

XUM1541 von FaszinationC64

Das Gehäuse enthält einen Schnappverschluss, so dass es keine Schrauben benötigt.

Pobrania
83
Polubienia
6
Ocena
0
P
Printables3d_bastelheini

C64-Überspannungsschutz von FaszinationC64

Es gibt 2 Versionen von diesem Gehäuse. Entweder eine Version mit Schnapp- oder Schraubverschluss. Für den Schraubverschluss werden 2 Schrauben 2x20mm benötigt. Für die Schraubvariante braucht man nichts weiteres.

Pobrania
81
Polubienia
6
Ocena
5
P

Commodore 64 (C64) - Keycap replacements set

C64 keys Row layout filenames start from the top to bottom, special keys are named. Known missing is the spacebar - will update here when done. Please note the prints in the images are done a few years ago on a printer that was pretty…

Pobrania
80
Polubienia
9
Ocena
0
P
Printablesgia

Modified C64 case hinges, fit between existing posts

Looks like there's many different revisions of the C64 breadbin rear snaps/hinges. I wanted a version of banman's design that fit between the vertical supports of my machine, as I'd prefer to limit grinding and modifications to the case.…

Pobrania
80
Polubienia
7
Ocena
0
P
PrintablesAchim

Wizard of Wor ( C64 / 8-bit ) | Fridge Magnets

Wizard of Wor ( C64 / 8-bit ) | Fridge Magnets All characters from the Commodore 64 port of " Wizard of Wor ". Just ... slice and print them in your preferred size glue some tiny magnets on the back (add some color to Worluk with…

Pobrania
76
Polubienia
13
Ocena
4
P
PrintablesMarodeur

C64 Floppy 1541 II bottom part

after my floppy fell down, I had to make a new base. Update 6-2025: updated version because the newer slicers render it incorrectly. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill:…

Pobrania
75
Polubienia
3
Ocena
0
P
PrintablesGoodwell

Keycap Stem and Center Tool for C64 and VIC20

Replaces the broken part of a keycap stem and provides a centering tool for a perfect fit.

Pobrania
74
Polubienia
15
Ocena
0
P
Printablesdukestah

SD2IEC side plate for breadbin C64

This is a side plate for the breadbin case C64 for installation of an internal SD2IEC device. The main purpose was to install additional buttons for disc image change and an on/off switch. The used switches can be clicked into the side…

Pobrania
73
Polubienia
6
Ocena
0
P
Printablesdjos_1475

Commodore C64 Diagnostics / Dead Test Cartridge Case

Commodore 64 Diagnostics / Dead Test Cartridge Case has been designed for the “ C64 Dual Dead Test & Diagnostic Cartridge & full test Harness ” designed and sold by Melbourne Console Reproductions. The LED is visible through the case and…

Pobrania
72
Polubienia
11
Ocena
0

Samsung FlexWash Top Washer Handle Replacement DC64-03483b , DC64-03483A

Replacment for the handle that always breaks , I printed this in petg , standing on edge like in the pictures

Pobrania
69
Polubienia
0
Ocena
5
P
PrintablesOsfald

Commodore C64 power adapter repair rebrick installation frame jig

If you want to repair the power supply for your Commodore C64 and looking for a solution to hold new parts inside old housing, this frame should help you. Additional data and pictures you may find here:…

Pobrania
68
Polubienia
16
Ocena
0
P
PrintablesAchim

Bruce And Opponents - Action Figures ( 8-bit | C64 )

Characters from the video game Bruce Lee , released in 1984 by Datasoft . The set contains Bruce, Yamo, and the Ninja from the original game. I also included the additional characters from the excellent (inofficial) sequel Bruce Lee II…

Pobrania
67
Polubienia
26
Ocena
0
P
PrintablesOlli W.

International Karate characters (C64) - 3 colors

A blast from the 8-bit past! This model is a pixel-perfect recreation of the iconic fighter sprite from International Karate on the Commodore 64. Every voxel was crafted and colored with care to stay as close as possible to the original…

Pobrania
65
Polubienia
23
Ocena
0
P
PrintablesJRP7743

c64 Cartridge Shell

This is a cartridge shell for use with Commodore 64s and 128s, and works with a specific dead test cartridge (and any other cart based off the PCboard that project uses) linked below. If you like to work on old Commmodore 64s, you've…

Pobrania
62
Polubienia
4
Ocena
0
P
PrintablesOsfald

Commodore C64 BlackBOX cartridge housing case

Recently I found some old cartridges for Commodore C64. They are working, unfortunately their housings look bad after over 30 years. So I decided to design new enclosures. First of them is a MicroLUC v2 cartridge case…

Pobrania
59
Polubienia
11
Ocena
0
P
PrintablesOsfald

C64 Commodore 64 TOMv3 USB mouse interface case housing

You may find on ebay some really clever interface, named TOM, for your C64 which allows to connect modern mouse, keyboard or gamepads by USB. It is also suitable for Atari and Amiga. It comes with typical housing, however this housing…

Pobrania
59
Polubienia
7
Ocena
0
P
PrintablesNikolai

C64 Wifi Modem Case - Zimodem Gehäuse

For assembly required items: M3x20mm screw x4 M3 nuts x4 M4x15mm screw x2 M4 nuts x2 Support is required only on the base place under the two buttons. It can be left in place and does not need to be removed.

Pobrania
57
Polubienia
2
Ocena
0
P
PrintablesSpicy3d

Zebralight SC64 Flashlight Diffuser

You can buy one of these diffusers from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! No supports required! This is a flashlight diffuser that distributes the light radially and downward to…

Pobrania
57
Polubienia
4
Ocena
0
P
Printablesbluescrn

Arcade Joystick for C64/Amiga

Arcade joystick enclosure for Sanwa or compatible stick two 30mm arcade buttons. Intended for C64 and Amiga use, but could be wired for other retro machines too. Recessed mounting space for a 9-pin D connector, so a joystick extension…

Pobrania
55
Polubienia
16
Ocena
5

C64 Cartridge Presentation Stand

Just print them in any quantity, and then simply stick them all together. No print supports required.

Pobrania
55
Polubienia
10
Ocena
0
P
PrintablesGoodwell

Hood for C64C cases

Every c64 at least needs a Kernal switcher to take full advantage of JiffyDOS or other useful modifications. This Hood for the C64c case is put on top of the original case, and can keep any switches, displays, or whatever else you want;…

Pobrania
54
Polubienia
8
Ocena
0
P
PrintablesOsfald

Commodore C64 The Expert Trilogic cartridge housing case

Next of the C64 cartridge's housings collection. This time I designed case for The Expert cartridge by Retrotinker/Dirk Wouters. Take a look on attached pictures. The case can take an ICs in a sockets, up to 10mm high. In the slicing…

Pobrania
54
Polubienia
9
Ocena
0
P
PrintablesOsfald

Commodore C64 MicroLUC cartridge housing case

Recently I found some old cartridges for Commodore C64. They are working, unfortunately their housings look bad after over 30 years. So I decided to design new enclosures. First of them is a MicroLUC v2 cartridge case. The next one is a…

Pobrania
54
Polubienia
6
Ocena
0
P
PrintablesSchlumpf999

Joystick Gamepad Retro Arcade for PC (USB-C) and C64 / C128 / Amiga Projekt Joyweiler

Hello, this is a housing for the retro joystick project by Joyweiler for variant 5 with strip grid board and display. Many thanks for sharing the joyweiler project on gitlab and for allowing us to add a link to this project:…

Pobrania
54
Polubienia
18
Ocena
0
P
PrintablesOsfald

Commodore C64 power adapter repair rebrick removal frame jig

If you want to repair the power supply for your Commodore C64 and looking for a solution to remove the resin, this frame should help you. Once you have removed the electrical wires, insert the bottom of the power supply into my frame and…

Pobrania
52
Polubienia
6
Ocena
0
P
PrintablescoffeeFueledDiy

Samsung Washer/Dryer Knob Mount DC64-03186A

NOTE: Print tilted at 45 degrees angled up off the build plate to provide enough structural support for both the clips and center post. This piece is held into the decorative knob shell with 4 Phillips screws. Simply unscrew the old…

Pobrania
50
Polubienia
6
Ocena
0

Commodore C64 Post Sleeve

If your screw posts are broken off it can be tricky to screw your breadbin case back together. These sleeves are designed to slip over the top of the stump of the broken post and be glued in place, repairing your beloved old brown…

Pobrania
47
Polubienia
12
Ocena
0
P
PrintablesDorffMeister

C64 Simple Power Supply PSU Case

I wanted to build an ultra simple C64 power supply using two wall warts (5v DC, 9v AC) and an extension cord. I used zip ties to help keep the cables from pulling out of the box. I designed this box to contain the power supplies and to…

Pobrania
45
Polubienia
3
Ocena
0
P
PrintablesPatrik

Yet another Poor Mans C64 Power Supply

This is my interpretation of a poor mans C64 Power Supply. Heavily inspired by the Videos of Jan Beta: https://www.youtube.com/watch?v=wWOU2sZv_ng https://www.youtube.com/watch?v=IpuKz0TTB2I All needed parts can be ordered from Reichelt…

Pobrania
43
Polubienia
6
Ocena
5
P
PrintablesOlli W.

Commodore C64 Ready cartridge housing case

Print halves face up with grid supports inside. Print Pin upright with Brim and organic supports.

Pobrania
42
Polubienia
4
Ocena
0
P
PrintablesTomDD

Commodore C64 Keyboard Dust Cover

Simple keyboard cover for the Commodore C64. The cover fits snuggly over the keyboard only and does not cover the entire case. Has a similar styling to the C64 case with the lines and logo at the top. The cover is fully cut-out to save on…

Pobrania
42
Polubienia
5
Ocena
0
P
Printablesdukestah

Commodore C64 Cassette / Tape Port Connector Cover

Printed it using PETG but should work fine with PLA too. 0,4 mm nozzle at 0.15 mm layer height, 0.2 mm layer thickness will work fine too. The letters are just one layer thick, if you get troubles sticking them to the bed then try to…

Pobrania
39
Polubienia
3
Ocena
0
P
PrintablesGoodwell

VAC Cartridge enclosure for C64

The VAC-cartridge for the C64 has been introduced here: https://www.forum64.de/index.php?thread/52749-heute-so-gebastelt/&postID=1813929#post1813929

Pobrania
39
Polubienia
2
Ocena
0
P
Printableswikallen

C64c RF plugs

plugs for the RF output and channel switch slots on the C64c case. Great for Ultimate64 or pi64s. Simply snap to fit into place. No case modification needed. UPDATED: Now Added Breadbin plugs. Print with supports. Breadbin plugs slide…

Pobrania
38
Polubienia
2
Ocena
0
P
PrintablesStrudster

My Retro Computer C64x additional 4010 fan mount

This is a mount for an additional 4010 fan for the C64x PC case from My Retro Computer (Kickstarter version). It requires no screws to install. It can not be used if the external HDD dock option has been installed in the C64x case as it…

Pobrania
38
Polubienia
3
Ocena
0
P
Printablesdukestah

Expandable C64 (and alike) board stand

Very easy to print, expandable board stand for boards for the C64, VC20 or similar shaped PCBs. Boards are angled at 64° ;) Good for organizing boards for repairs or testing.

Pobrania
38
Polubienia
7
Ocena
5
P
Printablesandabata

C64 Ultimate Utility Buttons

It uses the generic 6x6mm tactile switches. Comes with the freecad file to modify it.

Pobrania
37
Polubienia
4
Ocena
0
P
PrintablesStrudster

My Retro Computer C64x 4020 Fan Mount + C64-themed Fan Grill

This is a 4020 fan mount for the C64x PC case from My Retro Computer (Kickstarter version). It requires no screws to install and replaces the standard 4010 fan for increased air-flow pressure and cooling. A suitable 12v 3-pin 4020 fan can…

Pobrania
37
Polubienia
3
Ocena
0
P
PrintablesHaggiwatt
Pobrania
36
Polubienia
8
Ocena
0
P
Printablesaeberbach

Digital Joystick (Amiga, C64, Atari etc) v2

This is V2 of my joystick design. When I first made it I was quite inexperienced in 3d printing and was not aware of the common failure modes - well now it failed, and I have redesigned accordingly. The inserted hex nuts weakened the…

Pobrania
35
Polubienia
2
Ocena
0
P
Printablesfalken_gt4

C64 Fastload Cartridge Case v1.6 Inverted

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/j8HszXAnQcP Category: Computer

Pobrania
34
Polubienia
1
Ocena
0
P
PrintablesAchim

Panama Joe (Montezuma's Revenge | C64 | 8-bit)

Panama Joe (Montezuma's Revenge | C64 | 8-bit) The original tomb raider from back in the 80s. :-D Based on the sprite from the Commodore 64 version. La cucaracha! (Wikipedia: Montezuma's Revenge Category: Video Games

Pobrania
34
Polubienia
5
Ocena
0
P
PrintablesInsaneDruid

Commodore PET/C64 tape connector cover

Specifically designed as a power connector cover for my PET 2001-8 RAM-ROM-expansion (https://github.com/InsaneDruid/PET-RAM-ROM-expansion) Additional Parts needed 1 x Commodore tape port edge connector 6 x M3 threaded insert (like RUTHEX…

Pobrania
33
Polubienia
1
Ocena
5

Commodore C64 Motherboard Standoff mount

A C64 motherboard standoff replacement. These are very often broken in many C64 breadbin cases I see in my repairs on More Fun Fixing It. If you print these in transparent PETG and use UV curable resin these are super easy to fix.

Pobrania
33
Polubienia
7
Ocena
0
P
PrintablesGoodwell

C64 4 Player Adapter by Hucky

The model for the PCB without mounting hole can be found here: https://www.printables.com/de/model/603060-c64-4-player-adapter-v1-by-hucky

Pobrania
33
Polubienia
2
Ocena
0
P
PrintablesStrudster

My Retro Computer C64x Internal HDD Caddy

This is an internal 2.5 inch HDD/SSD caddy/mount for the C64x PC case from My Retro Computer (Kickstarter version). It requires no screws to install but does include 2 printable clips that push down over the sides to lock it more firmly…

Pobrania
31
Polubienia
2
Ocena
0
P
PrintablesSchorsch3000

C64c back clip replacement

You'll need to remove all of the remaining upper left and right part of the old loop and superglue on the new part sitting on the shoulders of the remainings, see pictures. there are two different sizes, the left clip is smaller then the…

Pobrania
30
Polubienia
4
Ocena
0
P
Printableswikallen

c64 breadbin case standoffs

Motherboard standoffs to replace cracked, broken or missing standoffs in the bottom of the breadbin cases. I made them extra wide on the bottoms for enough glue to surface contact. Sand down what is left of the broken standoffs. Screw the…

Pobrania
30
Polubienia
5
Ocena
0
P
PrintablesGreg S

WiModem Case for C64

I decided I wanted something a little more flashy for my C64. I designed this case for it that has interchangeable face plates so you could make to your liking. I have included three face plate designs in the files and I have printed and…

Pobrania
30
Polubienia
2
Ocena
0
P
Printablesiinnrr

Expansion port Buttons for C64U and Elite2

This is somewhat of a proof of concept, because I don't know if this will work with every C64 enclosure. It relies on a tiny gap between the metal expansion port cover and the enclosure. I've included a test model that you can print to…

Pobrania
29
Polubienia
5
Ocena
0
P
Printablesdaimansion

C64 Key Chain

Inspiriert durch einen anderen Key dachte ich mir, ich mache mal einen Schlüssel zum Basic :-) Inspired by another key I thought I'd make a key to the basic :-) … 8 bit muss reichen :-) …8 bits has to be enough :-)

Pobrania
29
Polubienia
2
Ocena
0
P
PrintablesSchorsch3000

C64 Ultimate Audio Jack Shield

Inspired by I also wanted to have a better fitting cutout for the audio-jack and made this version. Yes, the cutout is wider than tall, that's because the PCB can be screwed down with a little shift, abd this should accommodate for that.

Pobrania
28
Polubienia
2
Ocena
0
P
PrintablesShellgame

C64 The Orange Cartridge snap-fit cartridge shell

A shell for the The Orange Cartridge if you got one from the Kickstarter or built one yourself. It uses snap-fits which works really well with PETG. It's not tested with PLA, but if someone has problems with that being to brittle; let me…

Pobrania
28
Polubienia
1
Ocena
0
P
PrintablesTomDD

Raspberry Pi 2/3B+ with BMC64 IO Hat Case

Raspberry Pi 2/3B+ with BMC 64 IO hat case giving full access to all the ports of the Pi and the IO hat (two joystick ports and the 8 navigation buttons). Large Commodore logo on the bottom doubling as an air vent. Use Pan Head Self…

Pobrania
28
Polubienia
3
Ocena
0
P
PrintablesMD

Commodore 64 C64 Ultimate II+ Tape Adapter Case

I created this case for the tape adapter included with the ' Ultimate II Cartdrige ' for Commodore 64 by Gideon's Logic . I had previously tried printing cases designed by other creators, but they were too tight for my adapter, so I…

Pobrania
27
Polubienia
3
Ocena
0
P
Printablespolymatt

Chat64 Cartridge (THT Version) for Commodore 64 (C64)

This is a custom model for the THT version (https://www.chat64.nl/downloads.php) of the Chat64 cartridge. The original model fit a bit tight in my breadbin so I created this and added a few QOL enhancements: The “top” takes an M3xD5…

Pobrania
27
Polubienia
1
Ocena
0
P
Printableszeroflow
Pobrania
27
Polubienia
11
Ocena
0
P
Printablesleejsmith

C64 Saver case

Simple case to be used with the BWACK C64 saver 2.1 https://github.com/bwack/C64-Saver-bwack Cable Clamps used RS PRO, Black Nylon 66, Strain Relief Cable Bush, 7.4mm Bundle Diameter P/N 817-8861 4 core 20awg cable diameter 5mm screws for…

Pobrania
26
Polubienia
2
Ocena
0
P
PrintablesGoodwell

BMC64 Cartridge

This model is designed for M3 screws and M3 inlets

Pobrania
26
Polubienia
2
Ocena
0
P
PrintablesMorganWG

TheC64 Joystick Shaft

Replacement joystick shaft and ring for Retro Games TheC64 Joystick, weather you broke one and need to print a new ones, or just want a different color. Also included a model for the dust cover ring for more customization of the joystick.…

Pobrania
25
Polubienia
2
Ocena
0
P
Printablesbluescrn

C64 Ultimate IO Trim + Menu/Freeze/Reset buttons

Based on an existing user port trim panel design, this one has been tweaked slightly for a better fit on the C64U, and I've added a cassette port cover that provides space for 3 micro tactile switches for the optional menu/freeze/reset…

Pobrania
24
Polubienia
1
Ocena
0
P
PrintablesGoodwell

USB C64-Joystickadapter Case without Vents

Case for USB Joystick Adapter without vents: https://restore-store.de/home/58-usb-joystickadapter-by-donaldsinchai. This should make it easier to apply labels on top of the case All credits go to the original creator

Pobrania
22
Polubienia
2
Ocena
0
P
PrintablesOlli W.

C64 Bruce Lee Figures

Bring one of the classic Commodore 64 games back to life on your 3D printer. This set includes three pixel-accurate 3D recreations of the original Bruce Lee C64 sprites: Bruce Lee The Ninja Yamo, the sumo wrestler Each character was…

Pobrania
20
Polubienia
7
Ocena
0
P
PrintablesBigby

C64 Saver V2 Modular Case

This is a case for Bwack's modular C64 Saver v2 . See my blog post on this build for more details. Category: Electronics

Pobrania
19
Polubienia
5
Ocena
0
P
Printablesbluescrn

C64 Ultimate Keyboard Brace

Support for the somewhat flexible keyboard in the C64U Starlight edition

Pobrania
19
Polubienia
0
Ocena
0
P
PrintablesRPro Fabworks

Huntsman Mini C64 Keyboard Case

Print Options: NOTE: KEYBOARD MUST HAVE FLIP LEGS FULLY EXTENDED Low Profile | Full Profile Everything you need for both types is included in separate folders and the only difference between them is the side insert and cutout's width.…

Pobrania
19
Polubienia
6
Ocena
5
P
Printablesbreadbaker

C64 Joyport Switcher Case

Case for a C64 joystick port switcher like this one: https://www.polyplay.xyz/Joystick-Port-Umschalter-Commodore-64 If you need to modify anything: https://www.tinkercad.com/things/8EMEezukQ8W Category: Computer

Pobrania
18
Polubienia
1
Ocena
0
P
PrintablesTomDD

Raspberry Pi 3A+ with BMC64 IO Hat Case

Raspberry Pi 3A+ with BMC 64 IO hat case giving full access to all the ports of the Pi and the IO hat (two joystick ports and the 8 navigation buttons). Large Commodore logo on the bottom doubling as an air vent. Use Pan Head Self Tapping…

Pobrania
18
Polubienia
0
Ocena
0
P
Printableswikallen

Arduino Pro Mini Box for C64 rom switcher

Simple box to hold an Arduino Pro mini so you can double stick tape inside the C64 case. for switching a c64 multi rom mod. Adrian's Basement did a video of this simple mod. It is a press fit for arduino but you can use double side tape…

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesThor07

Einfaches Gehäuse für "The C64 Mini"

Einfaches Gehäuse für "The C64 Mini" Nicht perfekt!

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesSchorsch3000

SNES2C64 Case

Case for the upcomming SNES2C64 There is th scad files that has lots of options to choose from when used in the customizer app or in openscad. namely: 3mm or 5mm led's resetbutton present or not snes_connector_style usbcutout or closed…

Pobrania
16
Polubienia
4
Ocena
0
P
PrintablesGoodwell

C64 4 Player Adapter v1 by Hucky

A model for the version with the mounting hole can be found here: https://www.printables.com/de/model/227545-c64-4-player-adapter-by-hucky

Pobrania
16
Polubienia
1
Ocena
0
P
Printablesdaimansion

C64 Ballon Chain

C64 Ballon Für den 2farbigen Druck muss man dann noch im Slicer eine Pause einfügen. For 2-color printing you then have to insert a break in the slicer. … 8 bit muss reichen :-) …8 bits has to be enough :-)

Pobrania
16
Polubienia
0
Ocena
0
P
PrintablesDr. Nerf

Higher TCL 55C645 stands

I recommend PETG or ABS/ASA. PLA could theoretically work, but I didn't have the balls to try it. It may or may not fit other TCL models.

Pobrania
15
Polubienia
5
Ocena
0
P
Printablesjg

Crossroads II: Pandemonium C64 Game Characters

Inspired by the fantastic Commodore 64 game from 1988 written by Steve Harter. These are the creatures from the game. If you know this game, this will be cool. I simply screen grabbed the image of the characters from this (…

Pobrania
15
Polubienia
2
Ocena
0
P
Printablesdaimansion

C64 Coaster/Untersetzer

Ein C64 Untersetzer für die passende Tasse A C64 coaster for the matching cup … 8 bit muss reichen :-) …8 bits has to be enough :-)

Pobrania
15
Polubienia
1
Ocena
0