1797 modeli
I bought a used Case, but the HDD cage was missing. So I had to make a new one. It is pretty generic. It is designed for M3x10 and M3x16 bolts and hex nuts. I desinged it for Noctua Fans. But other fans should fit ass well. I highly…
Wydruk około 1,81 €–2,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introduction: This 608 roller bearing features a half cage print-in-place design optimized for 3D printing. The rollers have a dynamically changing cross-section, allowing both radial and axial load capabilities. Its unique half-cage…
Wydruk około 0,68 €–0,84 € nettoWstępna wycena jednego wariantu
Pictures show Rev0 before I realized one of the snap slots was way off so there are considerable gaps. These should all be fixed now so the updated versions fit together quite well. Included are two sizes 70x70mm and 100x100mm but the…
Wydruk około 1,69 €–2,06 € nettoWstępna wycena jednego wariantu
Up to 3 Adapter to mount it properly. (I use cork tape to keep it perfect in place.) You can use cable ties or 15mm hook-and-loop band. CargoCageForkAdapter.stl is for a 43mm fork. Let me now if you need a different diameter. Update:…
Wydruk około 17,04 €–20,83 € nettoWstępna wycena jednego wariantu
Bird feed holder for cage. Print instructions Printed with 0.3mm layer on PETG with support
Wydruk około 2,54 €–3,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
silicagel remain dry when the dehydrator is on and keep dry the filament spool when the timer is off. I never reminder wich temparature and time used for different filament for this reason I include the requirement fromt the manufacturer…
Wydruk około 4,22 €–5,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bike bottle cage/holder adapter to lower/raise cage mount. Use m5*12 screw, longer screw can damage your bike frame , always first try to install cage to adapter and see if screw does not stick out. Cage mounting holes are 64mm apart…
Wydruk około 1,50 €–1,83 € nettoWstępna wycena jednego wariantu
eine praktische Silika-Dose findest du hier: https://www.printables.com/de/model/607142-silika-dose-silica-tin-silica-container
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Bonjour à tous, Cherchant un cargo à réaliser pour un ami j'ai donc fait un remix de Cargo Cage - Bicycle Fork de trendspoke Mais adaptable pour l'impression sur la Mini + et donc plus compact J'en ai également profité pour un réaliser…
Wydruk około 7,75 €–9,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Model This project is still a work in progress so there are no instructions for detailed assembly yet, if you are keen to try the cage out pick up two 32mm Rosette plates and some 3/8"-16 to ¼"-20 Screw adapters to reinforce the 3d…
Wydruk około 26,82 €–32,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made these clamps to go on the roll cage to hold my top light bar and my rear lights. The roll cage is 1.75" in diameter, and I made these to fit exactly that. They're tight, but they're not that bad to get on. I just used a drill bit…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
Updated version of CV cage after it broke by my kids. Stiffer model / more material / higher tolerances / works fine I recommend add some grease anyhow… Have fun
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed this camera cage for my Panasonic HCV-757 and 777 camcorders, as there are no models of cages available with this formfactor. To design the cage I remodeled the camcorder and built the cage as tightly as possible around it.…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
These are Lego-compatible doors. One left and one right door can be used together as a 5x8 gate. The doors can be swivelled inwards and outwards. Print the doors in STL orientation with three outer layers, 15-25% infill and support. — I…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix for a 50 mm model that can be used for Prusament Spools
Wydruk około 0,84 €–1,02 € nettoWstępna wycena jednego wariantu
very importand to print the treads in detail or else they wil not work. i printed it with variable layer height
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
Organizer for your 6mm rods from Thorlabs.
Wydruk około 20,94 €–25,60 € nettoWstępna wycena jednego wariantu
I have a lovely DIY garden net cage from gardening naturally. Unfortunately, in a recent storm the plastic corners (these: https://www.gardening-naturally.com/joiner-corner) snapped off. So what's a guy with a MK3s to do? Pay massive…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
Print with a perimeters of resulting thickness > 2.4 mm or with 100% infill Supports are only needed for the cap (paint them in slicer) Silicagel drying balls with diameter d > 2 mm Base dimensions - 85x35 mm, Height - 175 mm Capacity: up…
Wydruk około 13,48 €–16,47 € nettoWstępna wycena jednego wariantu
Useful for mounting a Narvie GPS Tracker to your bike's bottle-mount. Fits around the Narvie GPS Tracker , which will fit a bit loose, so you could use some tape to fill the gaps.
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
The children urgently needed a crab cage for their holiday to collect small crabs by the sea. Here is the result. The upper part with the sliding door can be printed in place using the Step or 3mf file. The holes have a 3.4mm diameter, so…
Wydruk około 3,46 €–4,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small rack cage for bike fork
Wydruk około 4,87 €–5,95 € nettoWstępna wycena jednego wariantu
Auf dem Markt habe ich keinen Cage für die Canon PowerShot G5Xii gefunden. Also hier nun meine Kreation. Die Kamera wird mit einer Schraube an ihrem Stativgewinde im Rahmen befestigt. Ich verwende diese:…
Wydruk około 1,02 €–1,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cage shaped shifter for Thurstmaster TH8S . tried and open and light weight design. Plus i like seeing the inside of parts. My Print setting Print upright, foot on the bed. No supports. 0.4 mm nozzle and 0.2 mm layers. The one in the…
Wydruk około 2,31 €–2,83 € nettoWstępna wycena jednego wariantu
This plant support cage is designed with an open side so that you can more easily add it around plants that have already grown, allowing you to more gently add support for leaves, fruits, and vegetables without stressing the branches .…
Updated Version Please look at version 2 of my HDD Cage as it has a lot of improvements over this version Info A compact hard drive cage for 3.5" drives that will fit most cases. Can be mounted to 120mm and 140mm fan slots, not single fan…
Update: Just uploaded “V3” Versions (slightly better looking, slightly better function) Backstory I was unsatisfied with most of the printable bottle cages because they usually only fit one specific bottle/can size and do not “grip”…
This is arguably the best tray for desiccant beads for the AMS of Bambu Lab. The lid has a recessed grip where a lamella of the tray sticks through. this allows to easily take out the entire tray including the lid but without the risk of…
An extended version of the 2 Bay 3.5" HDD Cage made by @MattHope, because 2 bays weren't enough for me and I found this design nice. Keep in mind that general print time is 2-3 days. The dimensions of the HDD cage are: LxWxH = 160x(Base:…
This Bottle Cage is designed for 3D printing from ASA material, which is UV light stable, and then it is the best material for outdoor use. While printing, we recommended using the skirt in full high of the 3D model. The inner diameter…
I needed to replace the hard drive cage in my case to make more space for the GPU. However, I still had 2 hard drive that I wanted to keep. I liked the 2 bay model from @squirtle but I needed a way to mount it to my case with M4 screw.…
Źródło oznaczyło ten model jako treść 18+.
Depending on the filament and cell, 18.52 can be a bit tight. To add .1 mm of spacing, scale the original by 100.54 % (1.00539)
A generic 5 bay 3.5" hdd cage. Here is the 3.5" hdd caddy that goes with it: https://www.thingiverse.com/thing:4106276 I made a cage for the Thermaltake V21. I have not yet printed this exact model. However it works perfect for the…
Remix of an awesome bottle cage. I just made it a single part and optimized for no support printing. -No supports I printed mine out of PPA-CF
Overview OpenSCAD project to create a cage that fits in 3 5.25" drive bays and holds 4 3.5" hard drives using rails. Optionally supports a fan shroud to provide additional airflow to the drives. You need to print: 1 cage-cage.stl 8…
Side buttons protection cage for Baofeng UV-5R radio Allows you to avoid inadvertent push (bag, pocket, ...) Cage de protection des boutons latéraux pour radio Baofeng UV-5R Permet d'éviter des appuis par inadvertance (sac, poche, …)
This design is a modular HDD rack system that allows for flat printing and can be assembled in any number of drives you'd like. I've also designed a backplane to allow for hot swapping of drives and outputs to a SFF-8087 connector to…
Jurassic Park Raptor Cage at 1/18 scale.
Print the caddy with support attaching the print base. The screws are available at Amazon, Ebay, Aliexpress, … They look all the same for me.
Holds a standard European 250ml RedBull can without any play, tested on mountain bike trails. I tested it with PLA, but for longevity PETG would be best. For best results print on the side with some supports for the holes. 3-4 walls…
💡 If you like my design, don’t forget to leave a like ❤ It really helps me keep creating more models.
For a detailed guide on how to put this together, please visit our article here: https://www.corsair.com/explorer/diy-builder/cases/3d-printable-hard-drive-cage/ TL:DR - We have made two versions: Infinirail version - fits FRAME 4000D…
This is a stackable HDD Caddy with ventilation; -Has lip to catch edge of HDD so it stays in place (middle screw option as well) -Stackable -Suitable for storage of Offline HDD or a working Cage for multiple HDD. Superglue the tabs…
I wanted to challenge myself with this CAD design and see if I could make a roll cage for my RC. The roll cage needs to be printed with some impact resistant material. I happily share this model for free, but it took me quite some time to…
Update 18 Jan 2024 Increased infill to 50% Triangle Server rack screw and cage nut replacement. I designed these to be an easy fit for any 1U or 2U items that fit on a standard 19" server rack. Printed in PTGE, PLA, and ABS. .2mm layer…
Keep the status effect tokens in their designated location by placing a cage on top. 27-DEC-2023 : Added a version with honeycomb pattern for SLA printing or whatever. Makes it easier! You can use this version with FDM as well and you…
I didn't want to pay for a stupid model so I made my mashed together my own.
Printed with PLA 3 walls @ 20% infill. No rafts or supports needed.
Just a simple mount for the Walksnail VTX and new Caddx GM3 Gimbal that you can use or modify to fit your needs. It has an additional mount for 40mm cooling fan, because the Moonlight VTX heats up very quickly without an active airflow.…
An AirTag mount that sits hidden under the bottle cage on a bike. The mount (including the AirTag) is thinner than an actual AirTag! See “AirTag Preparation” below for more info. The mount is made of two halves. The top half gets screwed…
NEW VERSION HERE 3U cage to mount up to 6 3,5" SATA drives in a 10 inch rack cabinet. 2,5" SSD are supported with the provided adapter. Do not print in PLA. The heat and the weight WILL eventually deform it. Requires a 10"+ build plate…
The 3D surface provides extra grip while the base remains thin and playable. Whether you're riffing through a thunderous solo or just want to show off something sick on your keychain, this pick brings both flair and function. Print it in…
NEW MODEL 03/25 with POWER BUTTON on the front ! Improved model with mechanical POWER BUTTON extension on the front. An again improved and redesigned body for better print quality. Fits on building plates of all PRUSA Mk3,MK4, CoreOne or…
j'ai constaté , que la tige filetée de l'axe Z ,pouvait bouger en la soulevant et avoir un jeu en hauteur , environ 1 mm . il suffit d'imprimer cette pièce , 2 vis de 3x12 ! de la graisse à déposer entre le roulement et la pièce de…
After verifying several violations of the original license (CC-BY-NC-SA) applied to my models, I have decided to change the license used for my files. Although the new license (Standard Digital File License) would normally not allow…
People of the Drift Club asked me if i can Print some Rolecage stuff that fits in every Car. I tried my best to fit what they want. its just for the look, hope you like it :) The Sidebar you have to Mirror for the other side. Added some…
Mount four 3.5 inch hdd on a 140 mm fan mount. The extra 8 holes are for stability and works on Coolermaster Q300L and Q500L cases. Ender 3 v2 0.6 nozzle PETG Category: Computer
A cycle bottle cage designed for 3d printing, only needs minor supports on the overhanging tip to print. There are a few variants of the model: The “no_nub” variants do not have the small tab at the top which locks in standard size bike…
Designed completely from scratch around ICOMs STL Model of IC705. It was printed and improved in at least 5 iterations until it was release-worthy. Housing is a tight fit and should protect IC705 in outdoor use from all sides without…
A simple remodel, I did not take my time, but I spaced it out a bit to support 5 3.5" drives instead of 4 like the original model. I have computers that use the IcyDock FatCage, which supports 5 3.5" drives. I found this model when…
a beekeeper friend had a birthday - time to print a cage for a queen bee :-) the queen bee catcher from https://www.thingiverse.com/Squirrelly is really nice but there's still room for improvement in the movement of the cage. The model of…
Intro Three storeys to give your Gecko a choice of environments. First Floor: Nearly completely hidden Second Floor: Protection from above and 3 sides, but a wide outward view Third Floor (Roof): High but unprotected position to observe…
Inspired by the New Fun Chastity Cage Hinge Pin but built completely from scratch. The design is based on an unbranded cage purchased from Amazon. Use a standard handcuff key to rotate/lock it once in place. The dimensions (diameter x…
Fishing Cage Feeder Not the best feeder design, but I tried it and caught a fish. Most probably will update it later. Easy to print, just pause the print before the bottom cavity is closed and fill it with split shot for weight before…
Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral: https://unstoppabledomains.com/r/cc353d5f40d64e8 Visit my website:…
Just updated the files to v2, enlarging the bolt holes to 5.5mm to accommodate a m5 bolt diameter easier. My wife needed a bta (between the arms) bottle cage riser for her 51 Speedshop cockpit on her tribike. Figured I'd share the design…
Additional hardware needed. (Full list of all hardware parts will be coming sortly)
I found and printed this great model, but wanted a variant that I could put on the top which didn't have the tabs used for stacking to improve the look. Printed in eSun Pine Green PLA+. Original Description: This is a stackable HDD Caddy…
This is your basic centrifugal "blower" fan, using the motor from an old PC fan. The blades' center hole is 39.35mm in diameter, sized to press-fit over the motor/hub from a Coolmax 8015M12S ND1 fan (after removing the blades and sanding…
Heavy duty camera cage for DSLRs and other cameras. Arca style frame all around This cage doesn't obscure access to the USB and HDMI ports of Canon cameras. Also included is a monitor adapter for 7-8 inch monitors with VESA mount…
Finally the perfect solution to storing all your flexi toys has arrived, it's super strong and fully 3D printed, your flexi pets can have a home of their own. Requires no glue, it's fully 3D printed with a hinged a lockable door that's…
Scan of a Smallrig Sony ZVE10 Camera Cage for reengineering Important: The 3D Print Resolution Version is for this camera handle : https://www.printables.com/model/1134961-smallrig-camera-handle-with-hot-shoe-adapter
This is an adjustable ergonomic side handle which can be used either left or right of a Smallrig cage (or any other dslr / mirrorless video rig cage with two 1/4”-20 threads with 18mm distance on the side). You will also need: 2 x 25mm…
Based on the Wolf Tooth B-RAD system which allows users to relocate their bottle/cargo cages & accommodates additional cages as necessary. There are 2, 3, & 4 set-of-hole variants. The 2 & 3 hole configurations are part of the same SLDPRT…
Didn't like the idea of removing screws to mount the O3 air unit into a tpu mount adapter so I designed this case for the unit to sit on, it has 20x20mm and 30x30mm mounting holes, a channel to run wires under and a couple of braces that…
This model is used to hold a 500 ml can on bicycle bottle cages.
remix from 6.5 inch rack External 2.5 Hard Disk Cage for 10 inch 1U still mainly design for external hard disk so i keep old tray to use in this one have space left and i dont want it waste i create half size tray above half size tray…
Motivation I purchased some Canyon water bottle side loader cages to use with a half-frame bag but didn't realize that you need one of each direction in order to have 2 that load from the same side, so I designed one that I could print to…
I added instead of the srewing holes two slots for keep belts or rubber bands Printed successful, looks good. have mount it. the slots are a bit too thight. v3 have bigger slots Print Settings Printer Brand: Anycubic Printer: All-metal…
Hey friends! This model was one of my first ever attempts at 3D modeling. For a better solution, check out this model . For a great model to add even more drives in the optical bay, check out this model . I have created a hard drive cage…
Prints with the flat side down, take care with calibrating your support settings as it may be difficult to remove through the outer cage. Be sure to select supports touching build plate only.
Improved version with wider Body and higher placed hooks and ledge at bott so it does not tip. Comes with FreeCAD files so it is easily adaptable Print with PETG recommended to make dishwasher-safe. Bird feeder prints with PLA will warp…
Started to explore a roller bearing for integrating into a single-print-in-place fidget spinner (see https://www.thingiverse.com/thing:4876658 ). After looking at a few 608 bearings from Thingiverse (see below for references) decided to…
