11 107 modeli
This model has been verified for compatibility using a GoPro Hero 4 case. It is not an official GoPro part — geometry recreated for functional interoperability. Dimensions: Diameter (x, y): 29.5 mm Height (z): 17 mm Hole size: M5 screw &…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
This is a remix of The Standard 4x5 from Standard Cameras ( https://standardcameras.com ) and has been shared with permission from the owner Drew Nikonowicz ( https://nikonowicz.com ). The bellows and ground glass needed for the camera…
Wydruk około 17,00 €–20,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Raspberry Pi Camera Module V2.1 8MP Mount for Prusa Mini and Mini + and OctoPrint. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. UPDATE: I have added another version with X…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The mounting is done by clipping in the bracket and can be moved forward or backward if necessary ... I thought I could print the bracket I had designed for the Prusa MK3s. It fits too, but very tight, so it is very difficult to move.…
Wydruk około 2,60 €–3,18 € nettoWstępna wycena jednego wariantu
I uploaded a video where I show the design and assembly process. I tried making the camera as simple as possible, but some parts might be difficult to get. The ratchet wrench components used for the film advance mechanism are totally…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Print with supports on build plate at 0.2mm. Increase infill density and/or perimeter count and/or material used to suit your strength needs. When you try to insert the ¼" screw, you'll need to penetrate the one-layer thick “threading”…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you like my work please support me. :-) Buy me coffee at ko-fi.
Wydruk około 0,94 €–1,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE: Thanks to community feedback I have added additional sized inserts for different phones (so there's more of a chance of a snug fit for your phone, but a looser fit is okay long as it doesn't fall out!) as well as a version with…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
3D Print an entire RC model railway including a wifi controlled steam locomotive which streams a live video feed to your mobile and blows steam out its funnel! Please ‘Like’ this project, it helps me and my future projects. Thank you.…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Both pieces need supports . It should take less than an hour and a half in total. For the settings keep reading, for the story skip down below. The assemble it make sure all supports are cleared and slide the end without the ridges under…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
This is a very simple box for the new Raspberry Pi HQ camera module as I wasn't comfortable having a bare PCB flapping around. To install the module carefully remove the rear focus adjustment ring. Screw the module down into the case with…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Print in PETG for complient flex of the F-mount print in BLACK to absorb any stray light. Have fun big hugs bye
Wydruk około 2,09 €–2,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Crafted with a versatile 1/4"-20 configuration, this camera mount effortlessly harmonizes with a wide range of compatible tripods and photographic equipment, guaranteeing seamless compatibility. For attachment to the MK4 chassis, I…
Wydruk około 1,07 €–1,30 € nettoWstępna wycena jednego wariantu
Canon hotshoe - Action camera mount (GoPro, Insta360,...)
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
This is an Update to the Generic Camera Arm for SV06 & SV06+. To Date it is my most popular viewed and download model. So now I'm revising it. It now Includes a Small Lip on the block to prevent arm form twisting. The single screw…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Viewfinder, Eyecup for camera model Sony A7R IV. Not sure if model will fit other versions of the Sony A7 series. When printing with PLA I used scaling of 101% in Cura.
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
This is an adaptation of the camera back from the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 , inspired by and simplified from the Raspberry Pi Hi Quality Camera Case Adapter . I've adjusted the back plate of the…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
I liked the mounting system created by Sneaks. But it did not fit my Raspberry HQ camera. i made this case to fit on the arm with the same ball system as the original case. I printed it in PETG. Its made to be a tighth fit with the…
Wydruk około 2,09 €–2,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UniFi's G3 Instant is a great little camera, but it tends to fall over, especially if there are children nearby. This model creates a basic stand for the camera, making it harder to tip over. Includes a rear opening for the power cable.
Wydruk około 2,89 €–3,53 € nettoWstępna wycena jednego wariantu
I've built an enclosure with an Ikea Lack. Recently I've baught a Raspberry Camera High Quality(the one with interchangeable lens. I created a mount, which can pivot in 2 directions. I've printed it without support. It requires: 1x m3…
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
I made this because those IR lights really heat up and I don't want them to melt anything or even set a camera housing on fire, which is easiest when there is none.
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
The purpose of this protector is to protect the lenses of the cameras from scratches and shocks by creating a protrusion for the camera section of the phone. Printer configuration: 3D Printer: Elegoo Neptune 3 Pro Filament: eSUN PETG…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to try out the new Continuity Camera feature with the iOS 16 and macOS Ventura betas, so I made my own mount! This was designed around the 2021 14" MacBook, but might fit other MacBooks. Here's the version that uses the MagSafe…
Wydruk około 0,67 €–0,81 € nettoWstępna wycena jednego wariantu
I hunted at length for a mounting bracket made specifically for the Blink Mini that would mount it high enough above the bed to see the model, low enough to see the extruder nozzle, and offset far enough forward to be able to spot…
Wydruk około 3,39 €–4,15 € nettoWstępna wycena jednego wariantu
Mostly 3D-printed Ultimate Modular Camera & Cellphone Stabilizer System mounted to standard sized painting poles - PET bottle as counterweight This is my mostly 3d printed stabilizer system. You can use it with cameras or cellphone…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Rotated the extrusion clip created by Malcom in order to simplify printing and easily mount to an extrusion with fewer links Sorry about the photo orientation. Not sure why it imported them upside down and can’t fix them.
Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu
This is a simple adapter to use M58 (or M67) filters on camera lenses with M49 filter thread. It should be possible to print it without supports. I found that it screws more smoothly when printed with 0.1 mm layer height, but 0.2 layer…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
Remix of Buddy3D Buddy 3D Camera Mount Prusa MK4/MK4s and other Aluminum Alu Profiles
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
MATERIAL Raspberry Pi 4b Raspberry HQ Camera C-mount lens. In my case a 100mm telephoto lens . Cooling housing for RPi 4b (total height below 24mm) Anker 2000PD or Anker 325 Powerbank USB-A to -C cable Threaded inserts for tripod mount. I…
Wydruk około 5,10 €–6,23 € nettoWstępna wycena jednego wariantu
The aim of this project is to provide an open source, top of the line camera slider for e.g. timelapses, that costs approx. $100. This project is somewhat advanced and requires several non 3d printed parts. This is to provide a slider…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mount is compatible with Reolink E1, Reolink RLC-410W, and TP-Link Tapo C200/C210
Wydruk około 2,61 €–3,19 € nettoWstępna wycena jednego wariantu
Stand for A9 Mini WIFI Camera
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Oltre alle parti stampate avrete bisogno di 2 (due) viti a testa esagonale con filettatura M5 x 13 mm. Aggiornamento 07/09/2024 Aggiornati i seguenti files: Pi Camera Module 3 case - Front .stl Pi Camera Module 3 case - Back .stl Cradle…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Model This project is still a work in progress so there are no instructions for detailed assembly yet, if you are keen to try the cage out pick up two 32mm Rosette plates and some 3/8"-16 to ¼"-20 Screw adapters to reinforce the 3d…
Wydruk około 26,82 €–32,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I havce modified the Rames The Generic XIAO Sense Case (Seeed Studio XIAO ESP32S3 Sense, Camera) mount to be compatable with Michal Fanta 's Articulated arm.
Wydruk około 0,40 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
English: Camera holder for baby monitor Philips Avent SCD923/26 for IKEA SUNDVIK cot. Easy to print! Print on the side, no support needed. Please don't forget to share a picture of your print. Czech (čeština): Držák kamery chůvičky…
Wydruk około 2,88 €–3,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This case doesn't require any additional hardware, it just snaps in place. I suggest printing it with PETG but also PLA should work as well. To make the snap fit work propely be sure that there aren't any debris in the way left after the…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created my camera holder to my needs. I needed a flatter version of the official provided camera holder by LightBurn. The holder is completely printed with GreenTec. I added my gcodes but recommendation is to create your own gcodes with…
Wydruk około 2,44 €–2,99 € nettoWstępna wycena jednego wariantu
There are great tripod screw mounts for cameras. There are interesting solutions for having overhead camera mounts for youtubers and twitch users. So let's use these solutions to free up space for soldering with the Andonstar microscope.…
Wydruk około 1,92 €–2,35 € nettoWstępna wycena jednego wariantu
The included mount was too bulky and couldn't be aligned properly. So, I created a low profile version that fit perfect. Fits a VW Golf Mk7 Wagon mounted to the trim panel above the rear window.
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a very simple case for the Raspberry Pi HQ Camera. It's useful for covering the bare PCB of the camera when you want to use it on a tripod (via its own mount) without being attached to the Pi or anything else. It is designed to be…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
iMac 24 2021 Camera Cover for LEGO Filament ABS or PLA or PETG
Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
First things first. I can’t really take any credit for any of this model. The hat is an awesome model that I just made bigger and added some modifiers. The only reason I’m uploading it as a model is to make it easier for other ring owners…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
💬 Summary A set of protective lens caps designed for the Samsung Galaxy S24 Ultra . These caps fit over the three main camera lenses to prevent scratches, dust accumulation, and impact damage. A simple, fast print that adds a layer of…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
You can use this mount for every camera/webcam with screw mount. This mount is for Prusa MK3S, MK3, MK3S+, MK4, MK3.9, MK3.5, MK4S, MK3.9S and MK3.5S. I printed in PLA Camera mount and screw Infill: 15% Layer Height: 0.20mm Supports: No…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
This is a sun shade for a Eufy Solocam E40. Helps to avoid glare when the sun is in a place that doesn't quite work for the angle you want the camera at. The shade fits over the back of the camera, and as the camera body gets wide it fits…
Wydruk około 2,63 €–3,21 € nettoWstępna wycena jednego wariantu
I've Hacked and slashed the bellows frames for quick printing to test bellow fit for My Custom Bellows Upload, which is printed in TPU and in Vase Mode. This would help when printing in a different nozzle diameter or extrusion width. Cut…
Wydruk około 2,82 €–3,44 € nettoWstępna wycena jednego wariantu
Love Adafruit's Raspberry Pi HQ Camera Case ? Love the beautiful Pimoroni Hyperpixel 4.0 display? Now they can play together! This page contains the two models required to make the Hyperpixel 4.0 work with the Adafruit-designed case - a…
Wydruk około 3,48 €–4,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
We were so keen to get installing our UniFi Protect G5 Dome Ultra cameras with their shiny backboxes, then realised that getting hold of G ¾"-threaded Conduit is a bit of a pain in the UK. We wanted to use standard 20mm PVC conduit, which…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple case for the Raspberry Pi HQ camera. Rear side of case has a raspberry pi logo. I’d suggest printing with a <.15 layer height. It is based on the Pi mechanical drawings and the holes fit M2.5 screws. Make sure the front/back of…
Wydruk około 1,24 €–1,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wasn’t aware the M12 variant existed… I thought there was only one model of HQ camera so I was a bit surprised when I unboxed it. I couldn’t find a way to mount it to my telescope so I put together this basic design. I used some…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
In the pursuit of the “perfect” mount, I printed a series of mounts that where not very good or fragile. I decided to make my own so I could shut this hunger of mine. Made one based off two models I found and added some structures to aid…
Wydruk około 2,79 €–3,41 € nettoWstępna wycena jednego wariantu
Ceiling mount for tapo camera.
Wydruk około 0,62 €–0,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
So if you're a user of Heges or a 3D scanner that uses the TrueDepth camera you must hate how you have to hold the iPad towards the subject and not even being able to see it, well this will fix that issue, just place a 2.5mm mirror on the…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To build this model you will need to check out the two links below for aditional information and download the honeycomb cover: https://www.printables.com/model/155387-remix-x2-delta-p-duct-v2r22-for-the-mk3s-new-flow-…
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
Solarigraphy camera with water drain. assembly wideo by my brother: You need photopapier 10cm/15cm.
Wydruk około 17,50 €–21,39 € nettoWstępna wycena jednego wariantu
Case to build AllSky camera using UnderWaterDome…
Wydruk około 2,74 €–3,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
simple camera TAPO C110 holder for Prusa mini+
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Kamera funguje ako cloudova a system ONVIF takže je možne sa pripojiť akokoľvek. Ja to mam nastavene aj cez iSPY a funguje bez problémov. Veľmi kvalitné je nočné videnie, takže tlačím v absolútnej tme a predsa vidím absolútne všetko.…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a small case for one of the fish eye cameras for the raspberry pi. There is no label of the name or manufacturer on the camera, but the camera is often sold as "Camera Module Board 5MP 160° Wide Angle Fish Eye Lenses For Raspberry…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
Started as Pan/tilt camera holder, this Dual Raspberry GS/HQ camera holder/mount (for Pi5) turned out to be good enough for tripod mount, without originally planned external holder. Use with two GS cameras (Global Shutter) is only…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Raspberry Pi HQ camera back cover as small as possible. Model is created as the minimal solution to protect parts at the back of camera PCB from accidental contact with conductive materials. The body footprint matches PCB outline and it…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
If you have a Eufy E21 baby monitor camera and place it on a flat surface, you'll find the camera can't look all the way down. The camera can pan all the way up at the ceiling, which means you're wasting most of it's range of motion by…
Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu
I used PETG as I'm hoping it will better survive distortion from summer temperatures, but I also tried PLA and the part is more than strong enough for the possible abuse it will get from my dog. Printed on edge (cable cutout down) using a…
Wydruk około 2,89 €–3,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple Security Camera Weather Shield, originally designed for Unifi G5 Dome, but will work for most cameras. Suggested Print Parameters: PETG 0.25mm Layer Height Brim Enabled Version 4: 1/20/26 Rounded Design for optimized coverage.
Wydruk około 2,07 €–2,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made a camera with detachable lens, battery and memory card for theater/shows If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding free models for everyone to…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
Battery Holder for Hama camera tripod (17 mm diameter), using a Zoom Q2n-4K camera. This is an better alternative to Zoom BCQ-2n battery pack using 4 x AA alkaline battery. The case is made for 10000mAh external battery. Internal…
Wydruk około 2,59 €–3,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Import of https://www.thingiverse.com/thing:4540545 by mikelane76 . Simple print and case that works perfectly for the purpose. Had to take a little bit of the PCB off the side of the camera from where it would've been attached to an…
Wydruk około 0,58 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Compact camera mount with screw for UNC 1/4". This fits all cameras with UNC 1/4" thread like Logitech C920, Lenovo 500 FHD or similar. Dimensions holder: Width 155.12 mm height 65,00 mm Depth 51,66 mm Dimensions screw: Diameter 25.00 mm…
Wydruk około 2,95 €–3,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to mount my camera to the wooden table where I have my MK3S+ printer. This arm is about 3" offset (diagonally) and 4" up from the table surface. I printed with some supports so the arm wouldn't vibrate, fall or droop down.
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
The M2.5 screws now screw directly into the mount/adapter. Be careful about how many times you attach and detach the camera from the mount/adapter. It's not designed for that. Attaching it once should suffice. After that, you risk…
Wydruk około 2,00 €–2,45 € nettoWstępna wycena jednego wariantu
I sometimes have to analyze small parts for my work, and due to the pandemic caused “work from home” situation, I don't have access to the digital microscope in the office. At least I have an analog microscope at home, but I was not able…
Wydruk około 5,54 €–6,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cameramount for a Nightvision Raspberry Pi Camera on the X-Axis of my Prusa MK3 Printer. This is a Variaton of these designs: https://www.thingiverse.com/thing:2802522 https://www.thingiverse.com/thing:2873677 Thanks for the idea! You…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple mount/holder for Xiaomi 2K camera - I chose this camera for my 3D printer Lack enclosure and was thinking how and where to mount it. Usually this camera is easy to mount on some steel magnetic material, but not in this…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Items needed: 1 x Raspberry Pi Zero W 1 x Raspberry Pi Camera module 3 Wide 1 x Raspberry pi Camera Cable (300mm) 1 x Filament of choice 4 x M2 screw (15mm) 4 x M3 screw (10mm) 5 x m4 screw (16mm) 1 x MicroUSB Cable (Length is up to you)…
Wydruk około 6,58 €–8,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model combines two awesome models to mount and adjust the Raspberry Pi HQ Camera. After printing the ball head piece you need to print also the following parts from the linked originals: Raspberry Pi HQ Camera Mount for the…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Files Top Base Base with antenna Photos: Grey Print = No Antenna Black Print = Antenna Printing This model does not require external hardware to fit together. Printed without supports. Print setting used in photos: PLA, Prusa Mini + Input…
Wydruk około 1,86 €–2,28 € nettoWstępna wycena jednego wariantu
A mount for the Raspberry Pi HQ Camera to sit inside the top of the frame looking down at the build plate. When combined with the 6mm wide angle lens, provides clear shots of the whole bed during a print. Bill of Materials 3 Printed Parts…
Wydruk około 1,75 €–2,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print and place. Example gcode provided with snug supports for easy removal.
Wydruk około 2,47 €–3,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bracket to fix usb camera to the gantry the following is needed: 1x M3 heat insert 1x M3x10 1x M3x20 1x usb camera:…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
Build your own Buddy3D-like Camera from Wyze Cam V3 for your CORE One. With this enclosure you can build Buddy3D-like camera from Wyze Cam V3. This is somewhat destructive to the Wyze Cam V3, but if you're careful and record the process…
Wydruk około 2,58 €–3,15 € nettoWstępna wycena jednego wariantu
A taller version of the original that sees above the print board.
Wydruk około 2,79 €–3,40 € nettoWstępna wycena jednego wariantu
I needed a ballnut mount for my USB webcam (https://www.amazon.de/gp/product/B08M99YWG9) for the articulating Rasperry Pi camera mount from Sneaks.
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This 3D model is designed specifically for professional filmmakers who wish to simulate camera arm movements with a car before actual shooting. It's tailored for 1:43 scale SUV model cars. Simply print it out and assemble the pieces using…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu
This iPhone Magsafe holder is simply plugged onto the Mac. Now you can easily dock your iPhone and use it as a webcam. Since iOS16 and MacOS Ventura there is a new Feature, named Continuity Camera, to use the iPhone camera as a webcam for…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
Hello, Today I have a holder, stand for the PSVR camera playstation 4 (V2) for you. It is suitable for a table or a shelf. It holds beautifully, even in the position when you turn it. It can be adjusted nicely. It is better to stick the…
Wydruk około 1,86 €–2,27 € nettoWstępna wycena jednego wariantu
Mount in top front angle with two M3 screws and nuts, M4/M5 bolt to join the case to the mount. Compatible camera case is available here: https://www.printables.com/model/801363-esp32-camera-case No auto-generated supports are necessary,…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Link to CAD: https://cad.onshape.com/documents/e6e09e9e0e007a10af293064/w/ebebf269118f97728c774686/e/3e5ef0c7e7cf5655f47403fc?renderMode=0&uiState=63e95f946c42ea2abe0b7efe
Wydruk około 3,80 €–4,64 € nettoWstępna wycena jednego wariantu
Hello, Today I have for you an Action Camera Holder for FAST/FMA/MICH helmets . A great way to attach the camera to the helmet and then easily remove it. The holder fits perfectly into both helmets and camera holders. Be careful when…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu
Mount for an SQ11 camera on a model railway. The SQ11 can be used as a webcam under Windows and thus provide a live image. Halterung für eine SQ11-Kamera auf einer Modelleisenbahn. Unter Windows kann die SQ11 als Webcam genutzt werden und…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An adapter to mount a camera screw style Sentry case (like what comes with Sentry Pro) to the official arm. Tested on a Prusa mk3s.
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just made a wider bore in the frontpart (10.2mm) for a 120° Wideangle Camera. All other parts remain the same. Camera: https://de.aliexpress.com/item/1005007291555550.html
Wydruk około 0,66 €–0,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I had a Reolink E1 Zoom lying around and needed a camera with a wired connection for my Core One, this is the result. It mounts to the front left corner. The mount requires either eight 6×2 mm magnets or four 6×4 mm magnets. That’s all…
Wydruk około 1,94 €–2,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Für mein Wohnmobil habe ich eine Solar-Rückfahrkamera mit Funk-Übertragung besorgt ("AEG"). Da eine Kabellose Montage möglich ist und ich weder am Kennzeichenhalter noch oben am Wohnmobil die Befestigung für sinnvoll erachte, sollte sie…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Screw mod for Kinect Camera Mount to hold in place a spring 4x M3x10mm kinect_backplate_mod kinect_base_mod 2x Kinect_Mount_Lock_Print_original
Wydruk około 2,13 €–2,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The B4 Lens Mount is a historic videography lens mount format known for its weird characteristics, like its built-in chromatic aberration correction. Conveniently for 3D printer owners, the B4's flange depth is slightly longer than that…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
Should work with 40mm pole and Foscam cameras. Foscam Holes distance: 44mm U-Screw holes distance: 50mm My Print Parameters: Resolution: 0.2 Infill: 20% Perimeters: 3-4 Rafts: No Supports: No Material: PETG or any UV resistant
Wydruk około 2,28 €–2,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a mount/adapter for the Aukey PC-LM1E Webcam, based on the Prusa Mini camera mount here: https://www.printables.com/model/142759-prusa-mini-camera-mount-remixed At first, I generated a holder with the OpenSCAD file, which turned…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Amazon Parts list (US): Brass inserts M4 x 8,1 (Metric) https://amzn.to/3PxrdcE Amazon Parts (EU): Brass inserts M4 x 8,1 (Metric) https://amzn.to/4afwZJB
Wydruk około 3,97 €–4,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mouunt can be attached with double side tape. Additional parts needed: 1x M3x25 screw 1x M3 nut
Wydruk około 1,02 €–1,24 € nettoWstępna wycena jednego wariantu
![Re-[Remix] Delta P for MK3S+ with LEDs. Now with USB board camera mount options](https://media.printables.com/media/prints/256219/images/2298993_90c71f8d-5066-40a3-b6c0-da22c0efe545/img_2088.jpg)
