530 modeli
This is a canister spout with an integrated air channel that makes pouring liquids much easier and prevents annoying glugging and spilling. It is designed for common 5 liter canisters you can find in European retail markets for distilled…
Wydruk około 2,08 €–2,54 € nettoWstępna wycena jednego wariantu
A desiccant canister designed to be mounted in the center of a spool of filament during storage to help keep the filament dry. The canister has a lock-ring which threads onto the opposite end from the cap, after the canister has been…
Wydruk około 2,30 €–2,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I copied this here for archiving and to provide others with an easier print. I've adjusted the orientation and provided one that is reduced in size to accommodate 100g canisters. I printed mine in PETG using supports and 4 perimeters for…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Softair bottles arrives usually in carton boxes, once a few have gone the remaining ones wander around and they are under pressure! this canister keeps them in place, full capacity is 13 but, because I carry also maintenance oil bottles,…
Wydruk około 3,17 €–3,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Save some space and stack up those fuel canisters. Made for 90mm/3.5" diameter gas canisters with plastic caps.
Wydruk około 1,45 €–1,78 € nettoWstępna wycena jednego wariantu
3 slots CO2 bottles container for safe storage in backpack or side bag. Caution: before the 1st usage use abundant WD40 on treads to ease the coupling. Following the first go no more treatment is required.
Wydruk około 5,07 €–6,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted a keychain pill case that could hold three of a particular size pill, so I created this one. Inner dimensions: 13mm diameter, 20mm tall. Outer dimensions: 17mm diameter, 29mm tall. Printing All parts will print in the orientation…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
As for the title this is a SAA45 27 bullets capable container. Attention: use abundant WD40 on threads before the 1st coupling to ease it, then no more lubrication is required
Wydruk około 2,07 €–2,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I use a Rigid VF3500 vacuum filter canister as a dust filter in my 3D printer cabinet. This model adapts that canister to the 62mm (2.5") blast gate and hose connected to my ventilation system. This particular canister has a small hole…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
This 3D model is a perforated canister with a screw-top lid, designed to house activated carbon pellets. The perforations on the canister allow for airflow, enhancing the activated carbon's ability to absorb and neutralize unwanted odors…
Wydruk około 2,61 €–3,19 € nettoWstępna wycena jednego wariantu
I solved a very niche problem for myself, maybe someone else might profit from it. I needed an inlet basket for my reef tank. I had to design something that would skim the sandbed but not suction the sand into the filter. I printed it in…
Wydruk około 2,65 €–3,24 € nettoWstępna wycena jednego wariantu
Resized to fit the Wiseorb 40 Gram Silica Gel Canisters found on Amazon: https://amzn.to/4aYNMzl Print Settings Printer Brand: Prusa Printer: MK4 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% Notes: Used PETG, shouldn't be any…
Wydruk około 2,15 €–2,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original Scan (Atos Core 3D Scan) made by the Mammal Research Institute, Polish Academy of Science during the Open Forest Data project . You can download the original data here . I adapted the scan for 3D printing. The mandible is…
🎯 Recommended Print Settings For Best Results Print this design with a standard 0.4mm nozzle at 0.24mm layer height for that sweet spot between speed and detail. We're keeping it lightweight with just 8-15% infill, which gives plenty of…
STABLE AND SECURE: Improves adhesion and stability on any surface, prevents canister from wobbling or tipping over. The stand fits for 90mm and 110 mm gas canisters, so you can use it with any camping stove. There are two versions to…
This pouring spout is designed for canisters with DIN threads , commonly found on 10 L and 20 L canisters . An integrated air channel allows air to flow back into the canister while pouring, resulting in a smooth, controlled stream and…
Interior diameter is 3.0 inches / 76.2 mm. Interior height is 2.0 inches / 50.80 mm. No supports are required. The model responds very well to scaling in your slicer if you want different sizes. The table below provides scaling factors…
Monsters Inc Scream Canister with text. Top, middle, bottom - 0.3 Black ring, spigot - 0.2 Text, accents and gauge items- 0.16 Remixed model to include a magnetic removeable lid, gauge surround and text, make sure you download the correct…
print can and cap and glue it altogether. You can print in diferent colours for better effect.
As I broke my Firemaple's stand, was looking for similar printable model, with no luck. It is designed close to original part. It should fold to fit inside the pot. Here some specs from their website: With the Canister Stand, it's easy to…
Update Feb25: Thanks for almost 300 downloads! Full Step Files available for Purchase from my Printables Store Here - perfect for alteration and customization. Free STL Files for 3D Printing below: Set of Modular Lens Cases, Protection…
This is a canister spout with an integrated air channel that makes pouring liquids much easier and prevents annoying glugging and spilling. It is designed for common 5 liter canisters you can find in European retail markets for distilled…
Hello, Here is my remix of DIN61 cap. I added 3/4" thread for tap
This is a 35mm Film Canister Replacement. ******************************************************************************** ATTENTION There is an STL File of the Canister that Works Better with TPU it is labeled: ( Film Canister FOR TPU…
Didn't fine any eligent solutions to this problem that retained the ball check valve used for priming the filter. So I made one. 1.5mm holes Print with ABS or PETG. I tested both. Settled on ABS as it looked nicer. Pictured is the PETG…
A pretty run-of-the-mill desiccant container. Remixed based on Tenshe's design because the 2mm silica gel beads were too small and fell through the top and bottom holes. I also didn't need the space for the hygrometer, so I was able to…
Here's my contribution to all the quarantine creativity: an approximately life-sized C-20A Rifle used by the Starcraft character Nova. Originally I ripped it from an in-game asset, and then added detail from there based off of numerous…
I'm too lazy to buy this things. Canister cap with 1/2" inside thread for my campervan. Designed for print without supports. I print with Prusament PET-G Orange.
I wanted an on-theme way to store/display my kyber crystals, so I made this! I might eventually make a v2 to accommodate an LED strip to provide some illumination behind the jewels, but that's a job for another day. Parts are split up to…
Simple opening and closing spanner for standard 4- or 8-ribbed lids of canisters between 1L-60L volume (DIN 45 thread, Ø48.2mm | DIN 51 thread, Ø58mm | DIN 61 thread, Ø65mm). Turn tool around or use the included insert depending on the…
Trichter für 5 Liter Kanister zum aufschrauben. Gewinde M39,5 x 4. Es gibt mehrere dieser Trichter, aber bei keinem paßte das Gewinde für meinen Kanister. Empfehle das Gewinde mit der niedrigst möglichen Layerhöhe zu drucken; empfehle…
1/10 scale off-road fuel/gas canister. Two mounting options - straight through (you'll need an M2x18mm or so - total height is about 12mm) or using the circular disc and mounting to your truck/surface first; then mount the fuel canister.…
Feet for gas canisters used with backpacking stoves. Use three to make the gas canister more stable. They can be stacked
Mushrooms have inspired incredibly beautiful lamps and other decorative designs, but to my surprise not a single jar or canister. That while I imagened it would be so nice... Let's change that. Here's my impression of what it should look…
Hello, this is a remix from the canister spout to fit canister with a DIN45 thread. They fit on my canister with 2,5 L and 5 L. The cap ring I got from https://www.thingiverse.com/thing:2484159 , it fits very well. Category: Household
This is a stand to add additional stability 3 different types of gas canisters commonly used in backpacking/camping stoves (65mm, 90mm, and 110mm). The goal was to make a gas stand that fits several different sizes of canisters, without…
20litre plastic cansiter for 1/14 scale. For best result, print them as shown in the picture
A set of Mini Cansters! Previously I made a set of Sci-Fi inspired canisters . They were big, they were cool, but the smaller of the models weren't as practical because of some of the proportions. The aim here was to shrink the model…
This is a functional and screen-accurate Cryo Canister from the first Jurassic Park movie. Most of the credit goes to BadWolfProps which made the original files and coffeehedake which remixed the middle cylinders to be the right size from…
New petrol canister lid with Buttres M40x4 thread and with groove for rubber seal. Update 19.01.2024: After 3 years I discovered (and also read) that PETG does not tolerate bio-component (and some additives) in gasoline very well and the…
I have shrimp in most of my tanks and have to filter the intake of my Fluval 107 and 207 canister filters to prevent shimp and fry getting sucked in the filter. I designed this because I was tired of dealing with a sponge other the stock…
Hello all, this is a remix of two existing designs. I have connected the DIN 51 canister cap with a Gardena connector to easily fill canisters with a hose. The Gardena connection requires a standard O-ring.
With this stl file you can print gas canisters for WPL RC Trucks in 1:16 scale or diecast models. The stl file can be rescaled for other scales. The gas canister can be printed without support materials! If there are any questions, please…
This a remix of Ludwig Bre's DIN51 canister spout https://www.thingiverse.com/thing:4314888 which I modified rather heavily. A friend needed a cap for her fuel canister with two 10mm holes for tubes, I kept the third small hole for…
A replica of the movie prop that fits in a stash canister
Print Settings: Printer: Prusa MK2S+ Filament: PETG or PLA Tested with PETG Layer Hight: 0.3 Infill: 5%-10% Rectilinear Exterior Perimeters: 2 Brim: No Heated Bed: Recommended Supports: No Approximated Filament Usage: 11.79m Approximated…
Canister Holder for the Multiboard MultiConnect system, requires 2 https://www.printables.com/model/716558 connectors Different sizes available
I shoot and home-develop a lot of different film formats. APS has a unique canister, which is fiddly at best, and a PITA at worst. These tools are designed to take the pain out of handling those reels. There are two tools and a…
Dobrý den, Mám pro vás canister pro RC auto, jeep, expedici. Canister ma sroubovaci vičko pro lepsi autenticitu. Canister je ze dvou kusu!!! Tistene bez podpory!!! Pokud vás moje práce zaujala, odkazy jsou zde:…
Easy to print tube with secure screw on cap. Print with black PETG.
The " Spout Canister DIN45 " fits the hole in the remixed " DIN45 Canister Cap ". I've found the other cap to be better than the original spout cap, so now you have a choice of two.
Sturdy foldable gas canister stand for camping and backpacking. Compact and lightweight. Print in place design. For 90mm and 110mm diameter gas canisters. Version 2: larger stand diameter, better locking, more secure canister fit, higher…
About the Film Canister Holder: This is a simple remix of the base Gridfinity template adjusted to fit very precisely most common film photography canisters. Sizes: The hole is 32mm to best fits film canisters of 31mm of diameter (most of…
Lots of people have designed containers for desiccant (silica gel). Lots of people have designed such containers to fit in the centre hole of a filament spool. This one is mine. Features Sized to fit in the 50mm centre hole of standard…
I originally designed this canister to hold my Flexcut carving set. But I quite like this model actually and want to use it for a bunch of other things. It's kinda shaped like a chunky peanut butter jar… and will look like one too if you…
High Power Rocketry e.Charge case This is a simple and quick to print recovery charge case in four sizes. This uses standard electronic matches that when seated in the case, prevent black powder leakage. They're designed for single use…
I printed the metal parts in Gun Metal Grey and the ooze was printed in a bright “toxic” green. you will want to use supports to support the middle part of the R, which will have to be glued into place independently.
This is my take on a key for my bearvault cannister. This model has an easy attachment point to the canister for simpler removal (especially in the cold), a vertical wall for stability that is contoured to the curvature of the cannister,…
This is a cool model that I found on Sketchfab by RISD Nature Lab. This model is actually quite easy to print. There are just a few adjustments you need to make before printing. Add a raft at 2 or 3 layers for the best bed adhesion (or…
Canister holder with spacer for second canister For assembly you will need: Nut M6 4 pcs Washer Grover M6 4 pcs Screw M6x30 DIN 912 (ISO 4762) 2 pcs Screw M6x50 DIN 912 (ISO 4762) 2 pcs Nut M10 ISO 4032 4 pcs Washer Grover M10 2 pcs Screw…
Excellent base for furry canis like wolves, foxes and dogs
Print four parts like pic below.
This is a small container I've created as a clean wrapper for a little present. A wrapper with a little twist. Because of the clean design it might be a good starting point for your own decorations or modifications. Have fun to print and…
Smal canister, malí kanystr o obsahu 10L. Velikost 47x35x10mm. Oválné díry jsou uzpůsobeny na šroub M3. Jedná se o velikost 1/10 reálného “expedičního” kanystru.
Interior diameter is 3.0 inches / 76.2 mm. Interior height is 2.0 inches / 50.80 mm. No supports are required. The model responds very well to scaling in your slicer if you want different sizes. The table below provides scaling factors…
This is one of three projects designed to reuse most of a discarded PET bottle. The others may be found at the following links: TINY FUNNEL ADAPTERS GIFT BOX KIT CANISTER KIT DESCRIPTION This kit comprises a rim (strengthener) and lid to…
The model can be scaled up to any size your printer is capable of. (It's currently in 1/24 scale)
Wanted to learn how to create working threads in Fusion 360 and made this. The lid is a bit tight and needs to be worked in but it does seal. When printing the lid make sure to have the top on the build plate to save support. Settings…
Trichter für 5 oder 10 Liter Kanister zum aufschrauben. Gewinde M44 x 4. Die mir zur Verfügung stehenden Kanister hatten ein Gewinde mit ca 43,5 bis 43,8 mm Aussendurchmesser. Die 4 mm Steigung war bei allen gleich. Empfehle das Gewinde…
Interior diameter is 3.0 inches / 76.2 mm. Interior height is 2.0 inches / 50.80 mm. No supports are required. The model responds very well to scaling in your slicer if you want different sizes. The table below provides scaling factors…
This film canister is designed to fit 35mm film rolls, but it can be used to store any small objects. Screws, nuts, rocks, teeth, beads, candy, pills, printer nozzles, secrets… At the end of the day, it's really up to you what you put in…
A storage canister with a screw-on lid used for keeping solutions contained within 50mL conical (Falcon) tubes protected from light. Ideal for solutions containing light-sensitive reagents such as imidazole, phenol, and antibiotics (e.g.…
Material: PP (Polypropylene) It can handle acetone (in this case - nut also should be printed with PP). Thread - suits most of 5l (or ever 10l) popular canisters. Funnel.stl - entire detail with specified wall thicknesses If you want…
No more Ratteling This is a simple ring that fits around the bottom of the gas canister that prevents the “infernal” sound of it moving inside my Primus or Jetboil stove. I use id for the 100g canisters as they fit inside my stoves, but i…
When transporting 120 film along some 35mm canisters I thought to myself its a same these aren't universal. "I have tons of 35mm canisters sitting around that will never get any use. Why doesn't 120 film fit in these tubes…" I decided the…
Simple spout, see original model for details. In fact, just glue the centering ring into place and you're ready to go. Printed it in PLA+ without support.
Da die originalen Wasserhähne der Kanister teilweise undicht waren und das Wasser über einen längeren Zeitraum gespeichert werden muss, habe ich mich entschlossen, einen von Thingiverse heruntergeladenen Druck zu modifizieren:…
Hey you crazy UL hikers! This is a Fusion360 Port of Jan Rezac's air horn support canister for people to download and adjust a customer sized diameter. If you're unfamiliar with this idea and what its used for, check out this BPL thread…
3D model I sculpted of an Arcanist from The Elder Scrolls Online. Commissioned by zbzszzzt123.
A funnel which you can permanently screw on a 5l canister. Funnel also have a lid so you never have to put original lid back. I tested 3 types of canisters and it fits perfectly. I use it for used frying oil, but can be used for many…
Upfront, this is a replacement component (gasket) for a Dyson v15 vacuum. I cannot see how this would violate any laws because Dyson simply doesn't sell replacement gaskets for these systems…you have to buy an entirely new canister. If…
Some metal storage cans used for storage of flammable liquids (such as gas/petrol, thinners, paint materials) have a 45mm OD outlet however it's not a DIN45 thread as used on plastic petrol containers, as the thread depth is only about…
I designed this tray to carry 35mm film canisters so that they fit inside my alex draws. its made to fit the standard kodak sized canisters/pots but will fit nearly all sizes, ilford/kodak/fuji etc. fits the bed of an Ender 3 with 10mm to…
I store a lot of my filament spools inside vacuum storage bags. I include a perforated canister of silica gel inside every bag, along with a hygrometer. My usual cylinder (which I use inside my PrintDry vacuum tubs) is awkward in vacuum…
Remix uses the same parts and has the LED spacer and code provided for 3 different modes; PARTS LIST: -Arduino…
Needed 58mm and 65mm in one tool, so I designed it with onshape from scratch inspired by Sound-Makers Design https://www.thingiverse.com/thing:3469583 Print instructions PETG, 50% infill, 0,2mm, no supports
Oil Can Funnel with vent for waste oil. Trichter für Ölkanister.
Here is a modular strong C clip to hold canisters. Easy to print. Printed on my DIY 3D printer PLA (205°C/60°C) 45mm/s 0.3 Layer 0.8 Nozzle 2 shells 25% infill 3 Bottom and top layers Print Settings Printer: DIY 3D Printer Rafts: No…
Ever found yourself frustrated with the canisters film comes in? Ever needed a good way to store your film safely? Look no further. This is a film canister you can print at home, with the possibility to be customised to meet your own…
This is a remix of the cylinder made by anewsome on Thingiverse . I needed a $4 dollars canister, so I remade it in fusion360. I also made a model for $4, $5, $6, $8 and $10. The dollars amount is printed on the bottom. All models uses…
A container for silica gel pellets, but I made this an optimum size to fit inside filament spools and boxes. I found some other containers too big to fit inside the centre of some of my filament spools, so I made this one that should fit…
Fits two rolls of 120 film.
Replacement intake strainer to prevent filter from sucking up shrimp and small fish. Double height for more flow.
This silica gel canister is designed to be quick to print and light on materials. It's 50mm diameter and 60mm tall, sized to sit in the middle of common 1KG filament spools. It also fits nicely in the hub of this master spool . The body…
Printed with pla, 10% infill and supports. It can be painted or printed with multiply colors.
¼" pegboard organizer. Print the holder with supports. Print it upside down. For the cup, I used Prusa Slicer with a height modifier and made the top and bottom layers set to 0. Link to the Shapr3D files if you're interested in modifying.
I needed a tea canister for the tea that I recently bought. It is the first item of the series that I will create throughout this year. PolyTerra PLA Forest Green prints really easy and has a very nice matte surface appearance. The seal…
This is a gas canister stand for your canister stove. It doubles as a cap for the canister to protect it from dirt and grime. It's very low profile and will likely fit in anything that will fit the canister itself. I can put the canister…
