134 modeli
This is a completely print-in-place sliding tile puzzle. There are six models and a customizable puzzle you can make simply using PrusaSlicer! 4x4 Plain (Blank Tiles) Numbered 3D Elevation Puzzle 3D Spherical Cap 5x5 Plain (Blank Tiles)…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu
3D printed threads are unreliable, so I decided it's better to rely on an actual M5 screw and nut for the otherwise amazing camera mount designed by Sneaks. Some comments Thumb screw Since there are a few variations for the M5 socket head…
Wydruk około 0,13 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was unsatisfied with the backshells available for download, and I had none handy, and I figured it wouldn't be a tough build. These clamp together nicely and are locked together by the SHCS when assembled. They fit Tayda D-sub…
Wydruk około 3,48 €–4,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Can grab from about 20mm to 37mm diameter, 10mm more range than the original model. Uses the same stock gear. The gear gets clipped in place before the Broom Holder is mounted on a wall. Once mounted the gear is completely captive. No…
This holder is designed to hold peptide and medicine vials, such as healing peptides BPC-157. Has 3X ø.66" holes and 1X ø.70" hole made to suit my specific needs. Height from the bottom of the hole to the top of the lid is 1.82" I suggest…
…Please be sure to hit like & post a make, I'd love to see your prints! Here's my over engineered captive mount ADXL345 bed mount, it's designed for PEI covered beds of no more than 6mm deep total. Glass surfaces won't fit here! Keep your…
Update: 28/05/23 - thanks to the comment of @Seoxx_759414 , I've added a version with a flat back for using double sided tape
…Please be sure to hit like & post a make, I'd love to see your prints! Here's my over engineered Y Axis captive mount for the Fysetc Portable Input Shaper ADXL345 USB C Accelerometer bed mount. It's designed for ANY PRINTER with a PEI…
I needed two m3 tslot nuts. Didn't want to wait a month for stuff from china. Takes a standard m3 nut In openscad Print instructions Category: 3D Printer Parts Print Settings Printer Brand: Prusa Printer: i3 MK2S Supports: Yes Resolution:…
A HDZero goggle antenna mount for the TrueRC patch antennas. The mount is captive (no adhesive needed). Make sure to add a piece of foam between the backside of the antenna and the goggle front surface to prevent scratches from the solder…
The STL included is for 1in .035in NFC tags. A pause or color change has to be made before the hole is covered up to insert the tag. BE SURE THE TAG IS NOT STICKING ABOVE THE RIM of the hole. ---…
Based on @andrewjackso_2183720 's design No brim (not needed on my P1S but could be added by slicer, if needed) Bigger finger-notch Different sizes Parametric Customize your own using this OnShape document
Gridfinity is supposed to let you easily see what you have, so “lids” aren't really part of its shtick. But sometimes, you need lids! Like parts you want to protect from drips or dust. Lids that come off as a separate piece aren't great:…
This fidget is modeled after a classic machinist's puzzle, in which a nut is captured on a metal thread with caps at both ends. Unlike in a metal captive nut, however, this fidget's thread is a single piece. This fidget is printed as two…
Paracord bracelet shackle with a counter bore that retains the pin.
Hi all, this is a captive nut toy I designed a little while ago to demonstrate the unique advantages of additive manufacturing (it's also a fun desk toy). The file included has built in supports so I'd recommend turning support material…
An AMS disconnect tool with internal voids for captive 5mm x 2mm magnets. The intended use is to pause the print and insert magnets right before the enclosing layer for these voids gets printed.
I have printed the original probably 20 times, great model. I needed a version of the ¼-20 with a captive nut nearer the base, so here we are. Still no supports needed. Add your filament change gcode at the top of the opening for the…
After moving my printer a few times without removing filament first and having my spool fall off and roll around i decided to go looking for a way to make it captive to the holder unless i want it to come off, I found a model on…
A gravity broom stick holder optimized for 24mm diameter shafts (perfectly suited for Makita Multi Function Power Head attachments). Features a heavy gear by incorporating a M8x16mm SHCS screw and corresponding nut as well as a separate…
A Printable Rhombicuboctahedron as drawn by Leonardo da Vinci in Pacioli's Divina Proportione c.1495 with a captive ball. This model tests your printers bridging and overhangs and should be printed without supports on the external shape…
Parametric M6 and M8 Cymbal Nuts for Drum Set This is just a simple cymbal nut for a drum set. I have included versions for a captive M6 and M8 nut, but I have also included the parametric fusion file in case you need a taller or shorter…
This is the same as LL_Cam_back_Gopro, but with a provision for captive m2.5 nuts. It does make the back 2.2mm thicker than the original. I also changed the chamfers to fillets around the base of the mounts for aesthetic reasons. I…
I wanted to be able to control the placement of my MagSafe charger, and since I have plenty of photography friction arms with ¼ 20" threads, I decided to create a mount with a built in thread. The print requires a standard ¼ 20" nut to be…
NOTE: this model is toleranced for SLA printing. It was edited in Onshape and I have parametarised the m3 holes, bearing slot and captive nut slot. The parts which I have edited have a prefix “EDITED” the rest in the onshape document are…
This is a low-profile filament pass-through tube for a LACK printing enclosure (50 mm thick). It is designed to hold a captive piece of PTFE tubing (4 mm ID) inside for a smooth run, and printed threads hold the assembly snug to eliminate…
Add a square nut captive gap for lower-inner linear bearing housing screws, Added pockets to top Z brackets to accommodate Z lead screws. The captive gap is required since the geometrical changes to make this parts compatible with MK3S+…
I used PLA, 4 walls, and make sure to print the outer walls first if you are having trouble with small infills sticking to the bed.
The STL is 0.75mm too slim, but the gcode and Prusa project have the correct dimensions. Place the magnet on the lid and make sure it isn't repelled Mark the top When the printer pauses, insert the magnet with the marked side facing up…
Update (v25) New version reduces likelihood of ball resonating by using vertical poles to reduce horizontal movement of the ball Arrows added to indicate which way the part must be oriented to operate (arrow pointing up) It must still be…
Just follow the creators instructions.
I modified the gear side to be secured in two pieces with a bold and nut. I didn't like the idea of an M5 screw just embedded in the plastic and ultimately mine spun out. I tried a heatset but that didn't work well , so I came up with…
captive bead ring with removable bead
This is a simple remix that maintains the print orientation and strength of the original but for the KUSBA v2. This bed clamp allows you to temporarily mount the KUSBA v2 without damaging your bed. Bill of Materials: 4x - M3 Short…
A handy magnetic hook for your metal surfaces in a kitchen or workshop. This hook is not really made for heavy things but I've found it can hold a pair of cooking tongues pretty well. While printing this you will need to pause the print…
A captive USB dust cap printed in TPU, for a USB cable with a male A type USB connector. It attaches to the cable to prevent loss of the cap. Work the USB connector on a cable through the hole on the part from the bottom (print bed) side,…
Big Tree Tech USB-C ADXL345 Accelerometer Side Mount for Creality Sprite Extruders. Mounts using a single M3 countersunk screw. Uses a thin profile that should fit in with your other Sprite hotend modifications installed. The mounting…
This is a 3D fractal loosely based on the 3D Sierpinski gasket. The octahedral voids that the 3D Sierpinski gasket are recursively filled with arrangements of spheres. If the recursion were to go infinite, it would create the sharp edges…
Upload of my work from 2018. Now that I'm getting serious with my fidget printing again, it makes sense to have all my models in one place. :) Demonstration video Flyaround video ------------------------------------ This is a printable…
Hanging hook with captive magnets. Pause at height, insert magnets, and then continue printing. Print instructions Category: Household Summary Hanging hook with captive magnets. Pause at height, insert magnets, and then continue printing.
A coupler for 6 inch ducting. Uses magnets that are inserted by pausing the print partway then resuming the print. The magnets I used were sold as 6mm x 2mm, but measured as 6.02mm x 1.72mm. Insert a pause event before the layer that…
Pyrangle, but captive nut! Realistically, this isn't all that important if you have the 10-32 screw fastened properly in the back of the foregrip, but I have blasters that will not prime if that screw is used, so I made this! Still uses…
IKEA Behjälplig (Behjalplig) is the only solution to install non-IKEA dishwasher into IKEA METOD kitchen cabinet, but unfortunately this thing will snap/break very easily almost weekly. This part prevents bottom part to snap from the…
These 3 stock E3D ToolChanger Hemera mount components require threading screws directly into the plastic, which I'm not a fan of. I have modified these components to instead use captive M3 nuts which will provide a stronger hold and…
A cap for a PC4 PTFE tube to keep your drybox (or whatever else) airtight. Grips both the tube and the filament, so when removing the cap from the tube the filament is not lost inside. Designed for flex filament and with ridges for easier…
This is a configurable thumbnut design. The default parameters are set up for a square M3 nut. This can be configured to fit any size of square nut. When you're slicing the stl, make sure to set it up to pause at the end of the very last…
A phone stand incorporating the charge cable. The cable is captive in the stand and connects when the phone is mounted. My phone is in a fairly robust case with cord lugs either side of its base so the stand was designed for that. It does…
Love bitswype's design of the cable holder (Thingiverse 145187); I just had to adjust it to my Costco's sit/stand table so my laptop's cables won't drop to the floor each time I unplug them. I had to file a bit the bump that holds the…
my spin on the populare infinity cube can be printed at 50 percent size dos require a fair bit of supports auto gen supports are fine but u dont need any on the top bit of the cube exept for the hindgs so i recommend painted supports…
A remix of https://www.printables.com/model/1210194-mini-rack-10-server-rack-for-navepoint-or-gator-ra w/ captive nuts.
I built a camera arm using the M5 thumbscrews from @Zach, and the ballnut with M5 nut inserts from both @darkcoffee and @bulbasaur0, but had issues with the steel nut not staying in place when the camera head was adjusted. This model…
Inspiration drawn from this design, but smaller, larger triangles, more aggressive curves, and M4 nut holes.
This is a customized version of Thingaverse 145187 by bitswype using the SCAD file for a Ikea Karlby countertop. Parameters used were Cable Diameter: 8, Table Thickness: 35.5, Tolerance: .6. Printed in PLA at .2mm layer height with a .6mm…
Just a simple puzzle with a captive nut that you must get off without breaking. You could also keep the toy on your desk at work to fidget with. We kindly ask you to please not sell printed versions or copies of our 3D models without…
Nuts were spinning in place, so this provides space for captive nuts. Also included is a backfill piece (after nuts are installed and seated to proper axial position) so they are completely captive and cannot slide out of position.
it's a wedge that will help your board turn better, but the secret sauce is the captive angled washers. These washers will offset the angle of the wedge to eliminate the stress on the bolt BUT also, they hold the nut in place while…
This is a simple GoPro mount I designed for my bike secured using two captive M6 nuts and two M6 socket bolts. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus **Supports:** Yes Infill: 66% Notes: This design…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
Captive C washer / Hook - Rondella a C prigioniera / Gancio Ø4/6mm Centre to centre distance 15mm Ø5/6mm Centre to centre distance 18mm Ø6/6mm Centre to centre distance 20mm Resize/Scale to adjust dimensions If you download/enjoyed this…
Summary - Replacement for the captive door handle and seal on a Coleman high-efficiency furnace. Story - while opening the door on the top of my furnace, the original captive doorknob popped out and rolled into a hole in the floor. I used…
A modified version of https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/Maverick/V0.2_Handles with captive M3 nuts rather than requiring inserts. Requires 8mm M3 screws.
Waiting on a printer to finish… I expect this will take needle nose pliers, long tweezers, and round files to post process. Please don't try it if you want an easy-and-done print. My settings: 0.20mm layers, 3 walls Concentric top &…
This is a large bed leveling thumbwheel for large FDM printers that have room for it and use M4 screws for leveling. I made this for my CTC A10S, a CR-10 clone, after one of the miniature factory nuts disintegrated. These thumbwheels…
Clamping Cam - Captive C washers DIN 6371 - Rondelle a perno con vite testa piana 38x29x9.8mm M6x10mm 61x45x11.8mm M8x12mm Resize/Scale to adjust dimension If you download/enjoyed this file, I always appreciate a like - Thx
You know… 'cause your day is always gonna be better when your butt gets cupped.😂 When you're done joking around, you can flip them over and use it as a jewelry holder when you're working in the kitchen. Designed with Qty (6) Ø8x5mm…
Adapter for Extron Captive Screw to 3.5mm stereo jack (for unbalanced audio). Features Small, compact size. Easily connect 3.5mm stereo audio cable to your switcher's audio input/output. Protects against connecting (unbalanced) output GND…
Makerfarm laser cut wood doesn't hold the Z nut in place effectively leaving backlash and will potentially lose z alignment entirely if bumped. This locks the nut into place and prevents both of these issues.
Back in the 90's, I went to a 3D printer company with special effects model makers, and we enjoyed a fun demo of the products. One of the models - which I still have to this day - is the captive ball in a cage, print in place. With…
I lost the knob that secures my telescope to the tripod so I sketched up this real quick to substitute it. It's really simple but functional.
Rotate X-axis by 90 degrees Resolution: 0.12mm Infill: 20% Supports: no Rafts: doesn't matter
This is an idea I had when thinking about printing one part contained by another. It helped me learn a bit more about CAD in the process. The truncated sphere on the inside should spin freely within the cubic cage. It prints quite easily…
A full redesign based off the v3 CAD drawings provided by @Cunfusu . The original model allowed for the locking ring to fall below the button and rotate freely beyond its stops. This design make the two pieces one so the ring can no…
Upload of my work from 2018. Now that I'm getting serious with my fidget printing again, it makes sense to have all my models in one place. :) ---------- This is a remix of my own design of Captive Sphere Bearings added to Twitch Handle 2…
Small kit of filters to play with lasers, polarized light, photoelasticity, and diffraction gratings. The filter frame holds a captive 80x80mm bare polarizing filter, which makes it easier to handle without smudging or scratching it. The…
I have always disliked how the standard mount for the TrueRC patch antennas created essentially a kink in the coax cables. I also hated how that design forced the 90 degree SMA connectors to push the front of the connector (the most…
This is a Z-axis calibration plate for captive nuts from M3 to M6. Each nut's hole has a +0.2mm tolerance so the nut should definitely fit in (but ymmv still) and variations of hole depths are from nominal to +0.4mm with 0.1mm increments.…
Really like the originating model, but I don't have a set up for heated inserts. Captive nuts are pretty nice, what can I say? Ideally, this will need 1-2 m6 washers. There's only 3 layers above and below the nut.
Carabiner captive for gear and rope knots Printed in TPU
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Print in place captive nut. Use support only from build plate. Printed with 0.12mm layer height, one side the spiral is flat to easy support. Loosen nut with wrench after printing
I originally made this to connect a magnetic phone holder to an old Joby JB01235-CAM GorillaPod Original Tripod that I had. I then realized that I could make this more versatile by adding a captive ¼"-20 nut to allow for mounting to a…
Throughout the build of the E3D Toolchanger I noticed a significant number of parts that rely on tapping into plastic printed parts, in my experience this is a great method when using M5 and above sized threads, but is not very reliable…
The changes to the original are as follows: Added cut outs for a pair of M3 nuts underneath so that the Pi can be attached though the original holes using M3 x 8mm screws Increased the width of one of the struts carrying one of the…
This is a captive axle pulley system with a mount for your wall. All captive means in this scenario is that the axle cannot be removed, and it is print in place. This creates a system of 2 pulleys so that you can move things in any…
This is a remix of the original ADXL345 Bed Y Axis Captive Mount Clamp , modified to work with the glass bed on the CR-10 . The clamp recess was increased from 6 mm to 8 mm to accommodate the thicker glass bed. This was tested on a CR-10…
The original model is a great design idea, so I printed it and it worked well. But then I wanted to use continuous hook&loop tape (this one in the UK - https://www.amazon.co.uk/dp/B01CNWVKUQ ) and I wanted it captive so it wouldn't pull…
The Kartt 48mm Heavy Duty Cast Iron Swing Clamp has a design flaw. In that it allows the ‘captive’ nut to move back in the casting. Meaning the clamp must be almost completely closed before the screw handle can engage the threads. This…
The connector to the bed was giving me problems, it was stripping out and the top was interfering with my BL Touch. I removed the top portion, it wasn't doing anything structural, and I widened the arms and made space for an M3 captive…
This remix builds on Smorbickles' spool holder. bomtarnes --> Smorbickles --> e645824 Although that spool holder was specifically for SUMO enclosures, I remixed it as follows: profiled the roller so that the spool doesn't wander around.…
Captive design uses the stock 5mm fastener to lock the end cap in the carrier. These wont fall out like the stock one.Print out of 95 TPU with 5 walls. at 15% infill. Easily prints with no support. About a 7 hour print for 2 on a bambu…
turns the antenna cable so that it comes out the top and goes to the top right sma so that it the goggle has better analog perfomance
I ordered a set of 8 0.25 mm INDX nozzle tools from Bondtech directly. The plastic part on the tools supplied by Bondtech have a much rougher surface finish than that on the 0.4 mm tools supplied with the INDX kits from Prusa. See the…
ResetRail is a printed routine board for children: one captive slider key per task row next to a paper task card. The child slides the key across to the check when the task is done; it clicks into place at both ends. In the evening a…
Source: https://www.thingiverse.com/thing:2323000 For M6 pneumatic fittings & similar. Added a pocket for a M6 square nut, removing the uncertainty of plastic threads. Print Settings Rafts: No Supports: No Infill: 40 Category: 3D Printer…
After nearly having lost the screw-on magnets for my two Cycle Analyst V3 speed I decided to design something more "captive"...or "undetachable" (so to say). Most screw-on magnets I found (be it delivered with CA V3 speed or simply a bike…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Captive hooks for the IKEA TISKEN suction-cup towel rail. The TISKEN has a telescoping design with two tube diameters, so two hook variants are included: Small: fits the inner tube (10 mm bore) Large: fits the outer tube (15 mm bore) Put…
Might need rework on the kitchenband. Grind 2mm from the backside. The width should be wider than the hook. With that cut-out you can slide the hook on.
Single tool to ease working with the deeply recessed M4 screws in the Prusa XL side spool holders. Incoporates a captive 3mm hex key (must be at least 100mm long) which is inserted during a pause in the print. When slicing, make sure you…
![Sherpa Mini Captive Nuts instead of heatset inserts [SLA tolerance]](https://media.printables.com/media/prints/346945/images/2953567_eff3efb2-2dac-43da-849f-7160c3833b16/pxl_20221222_212349494.jpg)
