8091 modeli
It finally happened! The day every 3D printing enthusiast dreams about. My girlfriend walked into the room on Wednesday evening, showed me a picture of a lamp, and said “can you design and print something like this for me”. Little did she…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Easy to use Easy to print
Wydruk około 1,29 €–1,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of https://www.thingiverse.com/thing:1213459 My appologies to the original designer for not including the link to his model originally, as I was unable to locate the original when I posted. For use as a Center Finder;…
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
Easy to print - center and quarter markings 2 sizes 120 mm 150 mm I made somme adjustmets so the partial marking are now correct. I want to mention https://makerworld.com/en/@fmod for the clear explanation. You can also follow him on…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
The must have tool for your workbench !!! Only 3,52 gram's !!!
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
The new center marker, now with ruler incl. and a more robust design !!!
Wydruk około 4,02 €–4,91 € nettoWstępna wycena jednego wariantu
Great center finder with a relatively tall fence and all corners have a relief. Works both on square and round stock. Print instructions Category: Parts Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No…
Wydruk około 2,35 €–2,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Easy-Install Hinges for Your Centauri Carbon Side Panel Tired of removing the whole panel just to get inside your printer? These side panel hinges let you swing open the right-hand panel of your Elegoo Centauri Carbon like a door, so you…
Wydruk około 4,01 €–4,90 € nettoWstępna wycena jednego wariantu
One of my hobbies is woodturning, and one tool that every woodturner needs is a good center finder. The Center Finder (Square/Round) by my fellow YouTube Maker, Marius Hornberger , is one of the best I have ever used. Unfortunately, the…
Wydruk około 3,37 €–4,12 € nettoWstępna wycena jednego wariantu
20160601 cylinder center finder
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
Würth center finder Introducing Our Center Finder Tool: Are you often faced with the challenge of locating the exact center of your workpieces? Put an end to uncertainty and inaccuracies with our Center Finder Tool! Designed for…
Wydruk około 0,46 €–0,57 € nettoWstępna wycena jednego wariantu
Festool FastFix Centrotec holder - simplify your tool management Where do you currently store your FastFix Centrotec adapters? Print your own Festool FastFix Centrotec holder and make your everyday work easier and more productive. Don't…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Since I did not manage to adapt the parts well to my caliper by scaling, I have designed them from scratch. It now fits for my caliper which is 3mm thick. Because I noticed that there is a slight offset to the reference plane (zero…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Centring Square is an essential tool for precision work. It helps you easily find the center of round diameters – perfect for drilling, marking, or alignment tasks. Why choose this tool? ✔ Always useful in the workshop and for 3D…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
This model is originally from Tingiverse, made by Printer2261 also known as Shane Jackson. https://www.thingiverse.com/thing:5172136 But I thought that users of printables would also like to be able to print this, since the Tesla Model Y…
Wydruk około 8,62 €–10,53 € nettoWstępna wycena jednego wariantu
Simple Round Stock Center Finder
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
Cupra Born has some big trays to store things. But it is difficult to organize cards, pens, coins for shopping carts etc. So I first tried the model of Sven Van Opstal at Thingiverse to insert in one of the cup holders. In my case it had…
Wydruk około 7,61 €–9,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a scent training vessel for dogs learning or competing in scent work / nose work. You can place the scented object inside (such as a cotton swab infused with essential oils). There are two sizes to choose from (the original, 64 mm…
Wydruk około 2,14 €–2,61 € nettoWstępna wycena jednego wariantu
To follow on from and finish off my Ultimate Prusa MK4 casing I wanted to create a center tray similar to the original for the MK3 version . I was shown this cable cover and wanted to take this design and use it as the basis for the whole…
Wydruk około 2,99 €–3,66 € nettoWstępna wycena jednego wariantu
VW Alloy Wheel Centre Cap 65mm Part number - 3B7601171XRW If yours breaks and you still have the original, heat gun the aluminium logo plate off, print this file, and contact adhesive together. Alternatively, you can just print and use…
Wydruk około 1,85 €–2,26 € nettoWstępna wycena jednego wariantu
I needed to find the center of the circular object several times. So I constructed a simple tool. If you want to edit the model, you can find the STEP file in the attachment, or you can edit the model directly in OnShape at the link…
Wydruk około 2,46 €–3,01 € nettoWstępna wycena jednego wariantu
This is a scent training vessel for dogs learning or competing in scent work / nose work. You can place the scented object inside (such as a cotton swab infused with essential oils). Printing tips: Print the rock and cap as oriented in…
Wydruk około 2,43 €–2,96 € nettoWstępna wycena jednego wariantu
VW Wheel Centre Cap 77mm Part number - 7L6 601 149 Replacement of the original part in case of loss, breakage or just like that :) Tested in heavy traffic :)) During printing, you can change the color layer by layer for a better effect ;)…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original caps got lost during tyre change, so I've made a replacement. This is 60mm version of the caps. The exact size is 59.8mm to allow for tiny clearance. I've printed it using PETG which is flexible enough to click in without…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
111mm X 84mm Drill Gauge: 9.00mm M3* 12mm and M3 locknut
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
My other designs: Kelly Egan's ornaments These snowflakes sandwich tulle (mesh fabric) in the middle of the print, which suspends the center design of the snowflake. Print instructions The gcode has a pause in the center for laying the…
Wydruk około 0,60 €–0,74 € nettoWstępna wycena jednego wariantu
This is a scent training vessel for dogs learning or competing in scent work / nose work. You can place the scented object inside (such as a cotton swab infused with essential oils). The embedded magnet cutout is designed for a 12x1.6mm…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
Toilet paper dispenser with a box for wet TP and a drawer for tampons or other toiletries. Improved version.
Wydruk około 14,23 €–17,39 € nettoWstępna wycena jednego wariantu
Console tray based on zrides' center console design (thingiverse) with the following changes: removable divider radius added to all inner corners for easier dirt & dust removal outlets for usb charging cables added Printed for Tesla Model…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
This project is a remix of the United Launch Alliance (ULA) upcoming Vulcan Centaur 561 rocket. The original rocket files can be found at…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
This print was designed just for fun, and to see how a 3D printed lightbulb would look. Turns out it looks pretty much like a regular light bulb! For best effect, print in two colors, solid (ideally gray or silver) for the first 10mm, and…
Wydruk około 1,11 €–1,35 € nettoWstępna wycena jednego wariantu
Jdsfighter model gave us a great baseline design, but in the Australian version of the IONIQ5, the height of the rear part of the tray meant the cover wouldn't close. So we slightly tapered the design and also adding a few more…
Wydruk około 5,12 €–6,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This case is designed for Nixie clocks with top-view tubes, but can easily be modded to accommodate other displays and controls. It is inspired by the lovely midcentury design of the Italy-made IME KB6 calculator input/display unit. The…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Place a rubber mat behinde the mount and under the hooks. Then the Display is secured from scratches and the mount is not moving. Take superglue to put the two models together.
Wydruk około 1,91 €–2,34 € nettoWstępna wycena jednego wariantu
Toolholder for wall mounting your festool centrotec and fastfix attachments. If you only plan to hang your centrotec attachments, you can just print the first part. If you plan to use the fastfix part you should print the second part.…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
I was annoyed by the rocking of the spools during printing. It also caused micro ghosting on my prints. Therefore, I designed this simple spool centering device. It is placed on the existing spool holder. The conical screws do the…
Wydruk około 4,75 €–5,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed a couple of copies of @Adam 's most excellent rock scent-training capsule recently: https://www.printables.com/model/295199-scent-trainer-rock and was impressed with both the concept and execution. As an aside - I've also…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
I had previously re-mixed some dog scent training capsules that had a magnetic base - https://www.printables.com/model/936563-magnetic-dog-scent-training-capsule My daughter wanted to use the capsules with a cheap rubber safety non-slip…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Toyota Prius center caps to suit factory rims - PLA
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
It' a Double P-top for Bora Centipede.
Wydruk około 3,04 €–3,71 € nettoWstępna wycena jednego wariantu
Use ASA,ABS, PA6 , print with support easy installation with direct taping screws 2.5mm diameter and 3.5mm screws or epoxy glue
Wydruk około 4,45 €–5,44 € nettoWstępna wycena jednego wariantu
The usb-c hotend cable of the Elegoo CC if know to fail. Mine did. So I route a TB-4 cable through the printer and used this piece to secure the plug. This is the first version, and it fits my cable. I'll probably make modifications /…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
7/21/21 - This is a little mount I created for my radar detector to sit right above the center screen of my Model Y. Not sure how well it will stay put in the vehicle as I have just printed it. I am not responsible if this causes any…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
This is a bin for the front part of the central console in the Polestar 2. Handy to keep your loose change, for example.
Wydruk około 2,25 €–2,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Made this to fit on the BMW rims underneath my Holden Crewman and match colours to my vehicle. Better use a better temperature and weather resistant material like PET-G. Addition to https://www.thingiverse.com/thing:4854673
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
This stand is designed to accommodate 44 1.5 ml and 30 0.5 ml Eppendorf-type microcentrifuge tubes. Multiple stands can also be stacked on top of each other, making them ideal for storing a large number of samples. The stand was designed…
Wydruk około 8,89 €–10,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
6-5th century BCE silver coin from the Greek city of Cyrene : Silphium and Magas
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
I decided to print my own parcel shelf for the ND MX-5 (and Abarth 124). The shelf is right at the limits of the size for the MK3 but does fit. There are three options currently (I might add more as I get ideas/use out of it): Default:…
Wydruk około 3,24 €–3,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bottle holder
Wydruk około 2,11 €–2,58 € nettoWstępna wycena jednego wariantu
Simple Gemini wheel center cap, with tight flexible fit, that covers the center hole in Tesla Model Y Gemini 19" wheels.
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
A super easy print to keep your battery away from the gears on your Redcat Ascent. Here is where I installed it: No supports needed. I printed in PLA and it worked fine!
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
Type Protractor Size: 150 x 150 x 1.50mm 360 Degrees Protractor 0 to 9 centimetre (cm) And 0 to 3 Inch
Wydruk około 1,73 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Same as the original, I just put it on a diet.
Wydruk około 3,37 €–4,12 € nettoWstępna wycena jednego wariantu
Shank size is 8 mm. It can easyly be changed into the file (centring-mandrel.scad). This is my first model with OpenScad.
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
Wheel hub centercap for Citroen C5 I wheels Print so that the logo is standing up, use supports. I printed them out of PLA, but PETG would probably last longer in the heat, could eventually use some protective coating (metallic color…
Wydruk około 13,61 €–16,64 € nettoWstępna wycena jednego wariantu
BMW E46 Center console bin with retractable charger. Extra things you need: Sandpaper/paint if you want to make it need. Retractable unit from a retractable 12v car charger from Aliexpress.…
Wydruk około 35,40 €–43,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A practical translucent case for the popular esp8266 microcontroller. USB power outlet is kept free. Print instructions Best print with PLA natural for shining through leds. Read more about useful 3D Print life hacks in my ebook:…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena jednego wariantu
Center Drive Roller with One way slip gear for Filamentalist Rewinder
Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This mHct microhematocrit carrier is designed to hold 75mm capillary tubes for use in a centrifuge accommodating standard 15mL tubes. It's an improvement on the design included with the USA E8 Combination Centrifuge (whose original…
Wydruk około 0,99 €–1,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Center cap on pugeot 206 original wheels.
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
Holden VY / VZ Centre Console Flip Lid repair TAB, This will also suit some US & exported models. Printed in ABS, 50% Honeycomb Infill, 0.15mm Layer height, Print 3 or 4 at once. Brim can be used if you have adhesion issues, These have…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Features This center guide has a few features built in: It helps you precisely mark the center of the face of rods Can be used to mark 90° or 45° angles on your workpiece Can be used as gauge to mark lines parallel to the edge of your…
Wydruk około 0,79 €–0,96 € nettoWstępna wycena jednego wariantu
Introduction and Use Case This is a replacement for the wheel cover center provided by Tesla and other vendors for Tesla Model Y and perhaps other Tesla models. Printing I printed with two colors using PETG filament and began with yellow.…
Wydruk około 1,79 €–2,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Precision Centre Finder Centering Square 120mm Gaging Center 160 x 132 x 20mm
Wydruk około 3,26 €–3,99 € nettoWstępna wycena jednego wariantu
Centrecap for logitech wheels for the Aliexpress lamborghini badges. Printed with my favourite 3DQF black PLA
Wydruk około 1,96 €–2,40 € nettoWstępna wycena jednego wariantu
IT Ventola radiale di 20cm, con adattatore e dischetti di centraggio, per il bilanciamento dopo l'assemblaggio Consigliata e realizzata per i carrozzieri EN 20cm radial fan, with adapter for automotive and centering discs, for balancing…
Wydruk około 27,35 €–33,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Centering square gauge to find the center of a circle for drilling etc. > Print materiel used: Filament PM Black PetG. > Support: No support needed > Infill: 15% Gyroid. > Outer Perimeter: Set to 4 for strength
Wydruk około 1,53 €–1,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My effervescent tablet tubes kept falling over on the shelf, so I just needed something simple to keep them standing up. I remixed an egg holder to fit the purpose, allowing me to add as many holders as I need in various configurations. I…
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
Wheel Center with NSU Logo diameter 30mm Nozzle 0.4mm, layer height 0.15mm, filling 15% Color change expected at 2.15mm Centre de roue avec logo NSU diamètre 30mm Buse 0.4mm, hauteur de couche 0.15mm, remplissage 15% Changement de couleur…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
I bought and build the Original Prusa Enclosure, but I don't liked the filament guide. I want to have my filament spool on top of the enclosure so I need some kind of safe pass through for the top cover. I did not find any model, so I…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
As the Redcat Ascent 32 was launched, nobody made aftermarket wheels for it - so I created the replacement hex that converts from the Ascent 32 axle up to the standard hex size for 1.0" wheels. I printed in PLA on my Elegoo Neptune 4 Max.…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
The model comes in two parts. The ‘base’ requires you to pull out the little rubber mat in the console. It has three pins that loosely secure it in place (I didn't want a pin to break and prevent the mat from going back in). The top…
Wydruk około 4,49 €–5,49 € nettoWstępna wycena jednego wariantu
Some cool Aperture Science Wheel Center caps. I would advise to print in PETG and maybe Anneal it afterwards. Worked well with my MMU2s. I also printed really hot so that the layer Adhesion is good. The Stringing doesn't matter since it…
Wydruk około 6,86 €–8,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created this adapter to allow me to better use my blower backpack to air dry my car after washing. It is intended to concentrate the air to provide better drying performance. I recommend printing with the round end down and with…
Wydruk około 17,21 €–21,04 € nettoWstępna wycena jednego wariantu
Center caps with a Chevy theme. Tricolor and single color print files.
Wydruk około 6,95 €–8,49 € nettoWstępna wycena jednego wariantu
I created this to mark the center-line in wood-working. The existing solutions, such as this excellent one by @cewo, while being much simpler, required holding the tool at an angle, so that the tension of the tool against the wood centers…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
Spool Holder, Nut, and Cap were printed .15mm layer height. Spool Holder and the Arm were printed with support on build plate only. All other parts were printed with .2mm layer height. Be careful when snapping arms onto the frame as PLA…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Remix of MMU3 Spacer for MK4/S frame. End of spacers was mofified to be wider to be able to fit on MK4/S frame. Update: added locks to hold spacers in place Thanks for the original design...
Wydruk około 0,54 €–0,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Precision Centre Finder Centering Square 90mm Gaging Center 140 x 100 x 20mm
Wydruk około 3,01 €–3,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my first model of a Naval Canon made in and around thw 18th Century. I used reference images in order to make this, and this is my first attempt at doing so in Blender. I would have liked to put wooden textures on to the frames,…
Wydruk około 2,56 €–3,13 € nettoWstępna wycena jednego wariantu
Combination square and center finder has dedicated center hole contoured for pencil to rest nicely. Pins for center finder are stored on square when not needed. Square measures 5-¼" x 3-¾" with thickness of ¾". Pins extend ½" from body of…
Wydruk około 2,86 €–3,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This centering guide will help you to create bigger hole in the place of an existing one. The model hub will be mounted on a diameter 10mm drill and is made for a pre-drilled diameter of 57mm. I used PLA as material for mine, but i…
Wydruk około 0,96 €–1,18 € nettoWstępna wycena jednego wariantu
Caja adicional para aprovechar el espacio superior disponible en la consola central de almacenamiento de la SUV - Blazer RS - Chevrolet. Solo ocupa una parte por lo que deja visible la parte inferior. Lo diseñé en dos partes por lo que NO…
Wydruk około 2,41 €–2,95 € nettoWstępna wycena jednego wariantu
Centring angle for marking the centre or a 45 degree angle on round or square workpieces. There are two hexagonal holes on the underside for pressing in or gluing Ø7x1 magnets. Zentrierwinkel zum Anzeichnen der Mitte oder eines…
Wydruk około 2,37 €–2,90 € nettoWstępna wycena jednego wariantu
I remodelled theses two hands so it fit on a clock I bought at Aliexpress
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Inspired by the “4-Way Measuring Ruler” by Youtuber B-Star Crafts , this is a simple magnetic snap-on that can be used to easily measure and mark. When the ruler is inserted in the vertical position, it works like a traditional marking…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
Punic zoomorphic Askos (late 5th century BC) The use of this type of vessel was frequent among the Phoenicians, Greeks and Cypriots, being related to the afterlife. In Ibiza there are mainly representations of doves (symbol of the goddess…
Wydruk około 13,33 €–16,29 € nettoWstępna wycena jednego wariantu
I still really love the 2008 Tundra, but being someone who uses the sliding tray in the center console a lot i but i always seem to have more than will fit in it, tape, wallet, code readers. So i added a second layer to the bottom. This…
Wydruk około 13,50 €–16,50 € nettoWstępna wycena jednego wariantu
Wheel center caps adapter for original/genuine Škoda emblems of diameter 56mm to rims with 60mm hole. Fit is VERY tight, which is on purpose, so after inserting emblems it is necessary to use pliers to twist it in locked position (for me…
Wydruk około 1,24 €–1,52 € nettoWstępna wycena jednego wariantu
Simple stencil best used with a brush. I wanted a stencil that was sturdy enough to be handled without breaking that could double as a radial scale for quick visualization of size. The rings are 25, 50, and 100mm diameter circles. Has two…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This custom horizontal phone holder is designed for the Fiat Grande Punto , offering a stable and centered position for your smartphone — perfect for navigation or music control without side distractions while driving. Originally designed…
Wydruk około 2,11 €–2,57 € nettoWstępna wycena jednego wariantu
3D model of the Ukrainian city of Lviv Model created in Blender using the BlenderGIS addon. This model was designed for printing with a 0.4 mm nozzle and 0.2 mm layer height. Size - 100 x 100 x 8 mm
Wydruk około 2,08 €–2,55 € nettoWstępna wycena jednego wariantu
Case study 3d model i made as an architecture student
Wydruk około 6,15 €–7,52 € nettoWstępna wycena jednego wariantu
A wall-mountable dispenser for 0.50 € cent coins. Easily accessible by swiping the coins out from the bottom. Scale shows the amount of money in €. Attach to a wall with adhesive tape. If you are interested in modifying the model to fit…
Wydruk około 7,19 €–8,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Deutsch Zentrierung für den Generator der Stihl 024/026 zur mittigen Montage des Generators der Griffheizung. Gedruckt in: PETG Schichthohe: 0,2mm Düsen-Ø: 0,4mm Infill: 100% English Centering for the generator of the Stihl 024/026 for…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a CD-ROM bay cover for the Apple Macintosh Quadra/Centris 650 This should also work for the any other model that shares a case with it, such as the Macintosh IIvx and Power Macintosh 7100. Example G-Code is in generic PLA, and for…
Wydruk około 2,77 €–3,38 € nettoWstępna wycena jednego wariantu
I got a Bondis variant that has a larger outer radius at the clock movement and the standard holder won't fit into the recess. So unfortunately I have to sand something taking some of the structure away or remix the holder and print a new…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Hope you got use for it, i did =)
Wydruk około 1,70 €–2,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello there. I designed a ukulele shaped like a crescent moon. The name Luna is Italian for moon. If you are interested in 3D printing one, make sure you have a set of geared tuning pegs. Please enjoy. Which version to print? I highly…
Wydruk około 12,45 €–15,21 € nettoWstępna wycena jednego wariantu
Decided I want to pimp my Prusa MK3s+ up a bit so I hit it with the the Wu Tang treatment. It saddles over the top of the frame, with room for the factory Prusa spool holder to fit. Printed in PLA 0.40mm nozzle 0.15mm layers print face…
Wydruk około 1,15 €–1,40 € nettoWstępna wycena jednego wariantu
