1368 modeli
Make your collection visible New version of TCG display is available collection https://www.printables.com/model/1490952-multiple-tcg-sports-cards-wall-holder-and-display PSA graded TCG spots cards wall holder and display frame.
Wydruk około 2,48 €–3,03 € nettoWstępna wycena jednego wariantu
A holder for your phone to allow you to scan TCG cards like Magic the Gathering, Pokemon, Yu-Gi-Oh, etc. Inspired by the Card Slinger and DIY scanner stands, but designed from scratch to print within the build volume of my Prusa Mini…
Wydruk około 5,30 €–6,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stand for PSA graded trading cards (TCG)
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
So tired of untangling my ECG cables, or honestly watching my EMT untangle the cables according to my partners. One for each, 4-lead and 12-lead. Printed at 12% infill using PLA, will see how it holds up. It is a friction fit for the…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
This Pokemon TCG Deck Case is made to store unsleeved cards. It holds a 60 cards deck in addition of a Pokemon Coin, that usually comes with the official decks. I made some different styles of the Topcases. To print these cases in…
Wydruk około 4,82 €–5,89 € nettoWstępna wycena jednego wariantu
Print & acrylic draw
Wydruk około 1,23 €–1,51 € nettoWstępna wycena jednego wariantu
Large water bottle holder for clicgear (v3 to 4.5) golf push cart inspired by the v4.5 clicgear water bottle holder. This was designed for a 9cm diameter by 25cm tall water bottle ( YETI 18oz Rambler & Thermoflask ). Printing Tips…
Wydruk około 8,27 €–10,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to have a stylish way to remember Lola Haye's current class and designed this small gadget. The indicator has small pegs on its back to snap into place. You can adjust the force needed for turning by sanding the pegs carefully…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
This Player Dashboard has taken heavy inspiration from DJForget's version on Thingiverse, but I remade it from scratch in Fusion 360. I've also added the model for the 8mm cubes if you want to print your own. Inspiration: Arkham Horror…
Wydruk około 1,45 €–1,78 € nettoWstępna wycena jednego wariantu
New Version of the MTG TCG Card Divider Organizer with WL-1050 Address Label This is a bit wider at 73mm x 92mm+15mm per my friends' specs to fit his MTG box. So redid this version with basically square windows, tried to optimize this for…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
JetKVM 1U Rackmount with connection to a Ubiquiti UCG-Ultra/etc. Rackmount Option which i used before and be able to replace my empty right side. There are more options out there to combine it to. Use 2 M3 inserts and 2 M3 screws to…
Wydruk około 2,85 €–3,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed a small bracket to attach to the back of the UCG Fiber 10in Rack mount to help manage wires and bricks a bit better. It is affixed with 2x M3x16 SHCS. I wanted to use four ideally but unfortunately there isn't enough room and I…
Wydruk około 2,41 €–2,94 € nettoWstępna wycena jednego wariantu
My 3560 didn't fit inside of the rack I printed - https://www.printables.com/model/1225275-modular-10-server-rack-mod10 So I made a mount that fits below and bolts to the rack with a slot to allow for various fitments/alignments.…
Wydruk około 2,06 €–2,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cleaned version of ダックスフンド（Dachshund）3Dデータ by YahooJAPAN. This has been manually retriangulated in Blender to remove small holes that were stopping rendering in OpenSCAD / CGAL, as well as smoothing out and/or deleting stray vertices…
This is an updated version of my CCG card box. It now features a magnetic latch. The pivot plates are gone, and the lids now just click into place. Requires a pair of 10Ø x 3mm magnets. You can also purchase the .stl files for a 70mm, 100…
A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi UCG-Fiber cloud gateway. This mount is part of a 19-inch modular rack mount system I designed. You can mix and match the modules with other mounts. Take a look at my models here…
I really liked Johnny_Lawrence's design for a PSA stand, its minimal, quick printing, and looks nice but CGC slabs are a bit wider and I wanted a matching stand. I modeled this in Fusion 360 using Johnny_Lawrence's PSA stand as a…
This (very) fast-printing trading card storage solution has been specifically designed to print in ‘vase mode’ to allow for very low print times and economical filament usage. Each box holds approximately 400 standard size trading cards…
An unofficial 10-inch rack mount for the Ubiquiti Unifi UCG-Ultra | UCG-Max | UXG-Max. This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . Updates 26 Nov 2024: The V2 of this rack mount…
Pokémon PSA + CGC Card Holder
BigTreeTecg CanBus U2C board clip mount - Voron 2.4
A 10-inch rack mount for the Ubiquiti Unifi UCG-Fiber cloud gateway. This model comes in 4 variants: With front cutout for power cable routing With holes for M3 thread inserts. → UCG-Fiber 10i RM for Thread Inserts.stl With holes for…
My original post and print settings on makerworld with many exclusive models. A Pokemon themed card display stand/ holder. Commercial licence & support: https://www.patreon.com/DystLab
Based on RobotsRUs' MTG Commander Deck Box . This deck box fits 1 deck with a window for the Leader, 50 single sleeved deck cards, and 10 single sleeved Don cards. It probably fits double sleeve too, I don't double sleeve so I haven't…
Step up your game with these visually enhanced deck cases, a creative remix of an existing design loved by TCG players. While the original functionality remains untouched, capable of holding over 100 sleeved cards with ease, it's the…
Download Bust of Superman kills The Joker Injustice League STL for 3d printing by CG Pyro fanarts This bust is part of the Superman Kills the Joker package which is a diorama in 1/6 scale and scalable without problems to 1/4, you can find…
Miss Fortune League of Legends STL for 3d printing by CG Pyro collectibles fanarts customs figures Sarah Fortune, captain of Aguasturbias famous for her looks but feared for her brutality, is a stern figure among the port city's hardened…
Please checkout my other free designs at https://makerworld.com/en/@Westly Description Attached you will find several card storage dividers that fit standard BCW long boxes, Multi row boxes, and MTG Fat Packs / Pokemon Elite Trainer…
I've seen many different models of card boxes and each one was missing something. I created two boxes from scratch that met all my expectations. The boxes have large enough tolerances so they will not cause any problems in printing. The…
This storage tube fits standard neoprene-backed fabric playmats 610x350mm (approx 24x14") such as those sold by UltraPro, Ultimate Guard, GameGenic, and others. The two halves are identical apart from the latch section. Printing Notes The…
The deck box I remixed from is fantastic, but there were a few things I wasn't happy with. I also wanted to be able to fit the life counter inside the box. IMPORTANT: If you want to use magnets in the life counter, you need to set…
A 3D printable frame to display your standard size TCG cards like Magic: The Gathering, Pokemon, Yugioh, Lorcana, etc. in a magnetic card holder. I wanted a way to display my MTG Princess Bride Secret Lair foils in my office, so I created…
Some simple Power Counters meant to be used for the One Piece TCG. Recommended printed at 50% scale to closely match the size of the cards. I printed mine on the short end with no supports, to best preserve the shape of the jolly roger.…
This Pokemon TCG Deck Case is made to store sleeved cards. It holds a 60 cards deck as well as a Pokemon Coin, that usually comes with the official decks. I made some different styles of the Topcases. To print these cases in multicollor,…
A modular 19-inch rack mount for the Unifi UCG-Ultra, UXG-Max, and UCG-Max lineup. OBS.: The UCG-Max processor reaches 75~ 90 degrees Celsius for normal use, and the bottom can get REALLY HOT . So use filaments with higher temperature…
I saw a box for CCG cards with a gearing system to raise the cards up. I thought it was quite nifty but at the same time, overly complex, requiring multiple metal pins. This is my own take on the concept. Huge update - 05/12/17: I have…
This is a display stand for your UltraPro toploaders that I made based on the design of 0d7i0s to display some of my favorite Pokemon trading cards. The size of the model is perfectly adapted to the size of the toploader.
A simple box for storing Pokemon TCG cards. Im not sure how many they can hold. One version of the base has an extra wide slot for hard card covers. Print Details Nozzle: 0.4mnm Layer height: 0.2mm Material: PLA Printer: Ender 3v2…
A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi UCG-Fiber Power Supply Unit (PSU). This model comes in 4 variations: A plain mount, just for the PSU. A version with keystone slots. A version with a shelf. A version with the…
-Check out my new design here - This is a work in progress scx24 chassis. It has a slight angled skid and fully customizable skid plate angle to allow better break over angle. There is a version for all wheelbases ( I have not tested the…
This is my take on path markers for the Arkham Horror LCG. As I do not have so much table space, I wanted to have small markers, which can be placed inbetween the cards without having to spread the cards too much. The single and double…
Rackmount for UniFi Gateway Max (UXG-Max) . As the dimensions are identical, it will also work for the UniFi Cloud Gateway Ultra (UCG-Ultra) and the UniFi Cloud Gateway Max, but you won't see the display. Ports facing front, works for…
3D recreations of the dice from Genshin Impact's Trading Card Game. These were made in Fusion 360.
An all in one Dashboard/hub for Arkham Horror LCG. This allows you to hold the Agenda Deck, Act Deck, Doom Counter, All tokens, and encounter deck. You will need a large print bed (300x300) to print this beast. I did not create any of the…
Help keep your Pokemon TCG cards organized, especially when it comes to your energy cards and/or bulk! These multi-color print dividers are the general size of a Pokemon card with a tab to help make it easy to see and get to the different…
These simple and compact holders may support Scenario reference, Act and Agenda cards, with a tray for doom and clue tokens. They can also be used with any board game featuring american-sized cards. Print two large holders and one small…
This insert is designed to fit the revised version of the Lord of the Rings LCG core set. This also fits the “Saga” expansion boxes as well for the LOTR LCG, since the boxes are the same exact size. I included the files required to print…
Description du modèle 3D TCG Deck Box for Pokémon, One Piece, Lorcana, Yu-Gi-Oh!, and Magic This 3D-printed deck box is perfect for trading card game enthusiasts who play Pokémon, One Piece, Lorcana, Yu-Gi-Oh!, Magic: The Gathering, and…
This is very similar to the clips provided by manufacture of the monitors for the 4 limb leads. We were tired of the 6 leads being a tangled mess and the clips always getting lost, or broken and purchasing new ones. So I redesigned the…
Simple bash guard to mount to frames with ISCG05 mounts. Second and third photos show the aftermath of a pretty hard hit on a large rock in Bear Brook state park in NH - it definitely works! Various sizes to clear different chainrings…
Arkham Horror LCG Player Board. Fits sleeved player cards. Track your health, sanity and actions remaining during investigator phase. Comes with small tray to store collected clues and resources. Designed in tinkercad and printed on…
Designed for supportless printing with 0.6mm nozzle and 0.2mm layer height. Overhang angle is 25°. Mount holes accept 2.9mm flat head screws.
If you have bed adhesion problems with the centers of the zeros, in the slicer find where the first layer on the back of the zeroes is printed and set the number of slow layers to that layer plus five. For those still having issues with…
Model is tight fit. Recommend 102-104% scale for easy fit, if you don’t know use 104 as your bolt will always fit. My setting was 102% for a fit without calibrating filament I leave my BCG out of my gun for storage as well as swap between…
This is a cutaway bolt carrier for an ar-15 for leaning purposes, this allows you to see the inside of the bolt.
This is a card divider for standard size TCGs with similar design and measurements as those made by Ultra PRO and Ultimate Guard. As such it should be compatible with most of their current accessories. The model is oriented upside-down to…
16mm spin-down +/- Might Dice for playing Riftbound TCG! These are six-sided dice ranging from +/-1 thru +/-6. Based on the design seen on-stream at Shanghai Nationals 2025. Featuring rounded corners, print with 100% infill for a…
An unofficial wall mount for the Ubiquiti Unifi Cloud Gateway Ultra. It can be either screwed in place with two M4 screws or attached with a double-sided tape. It works for the UCG-Ultra | UCG-Max | UXG-Max. I've also shared the .step…
This is a collection of Tokens for the Pokemon TCG that I designed. Each coin has a hight of 2mm and the font starts after 1mm. If you like the two color effect just swap the filament after 1mm
My goal was to create a small minimalistic top loader stand to view my cards, guess it could be used without a top loader, but it's always a good idea to store them protected, and they would also sit kind of loose without one. I have…
The holders where optimized for PLA and a layer height of 0.15mm. Assembly does not require any glue. Just snap them together. ---- Did you like my print? If yes please rate it ❤️ and post a photo of your results. 📸
This is a very high detail model of a US Navy Ticonderoga class cruiser (CG) recommend 1.0 layer height or better and support blocks for the masts otherwise it is very hard to get the supports off without ripping off the mast.
This model was originally on Printables where the creator posted his .step file for editing. It's been mixed a few times but as the smaller Max and Ultra Unifi models. This is for the Unifi Cloud Gateway Fibe r unit. It's a wall mount…
Deutsche Version: Die ist eine Deckbox, passend zum Spiel Lorcana von Disney. Die Box bietet genug Platz für zwei vollständige Decks und Zubehör. Auch die Anleitung kann, entsprechend gefaltet, bei geschlossenem Deckel untergebracht…
VKB STECS / MCG-U TDC Hat Button Cap Pack v1.1 Created by John5 CC BY-NC-SA 4.0 Special thanks to an anonymous member of the VKB Discord for help with measurements of the OEM VKB MCG-U hats. Note: Failure to follow instructions for FDM…
This organizer is designed for the box format of the revised edition of the game (core set or extension). Supports sleeves and vertical storage. ❌ WARNING ❌ This insert is not compatible with the latest edition of the game (2026)! For…
This one is designed for the bronco/defender style chassis. I will update later with the option to use it on a high trail later on. Assembly for the base frame is coded with colors: Yellow = M2.5 x 15mm, total 4 pieces Green = M2 x 8mm,…
This an Investigator card stand for the board game Arkham Horror LCG. I liked timograw's general design for an Investigator stand, but this version mixes in more realistic octopus arms and tentacles by ClayRade. The rectangular card frame…
Stand um für bspw. ManaBox o.ä. die MTG oder Pokemon TCG Karten einzuscannen. Druckbar ohne Support in 5 Stunden. Zusätzlich benötigt: 8x M3 Schraube mit 10 mm Länge inkl. Mutter Front wurde für den Cutout des Deckels angepasst. -----…
Golf Balls (3) and Tee (4) holder addon for clicgear v3.5 & v4 golf cart that can be hooked up to the handlebar on one of the existing unused clip holders. Testing Have been using this item for a full season (2023) and it did not break…
As our Tempus monitors do not come with the cable minders one would typically find on other cardiac monitors out there, I decided to look around and see if anyone had made something that would work. Despite trying multiple different clips…
One Piece Jolly Roger Deck Box Lids. This is a Remix of a Remix inspired by another Remix of Whity's Rugged Box https://www.printables.com/model/258431-rugged-box-parametric…
This is a solution to store all your Arkham Horror Game Assets. It stores all cards and tokens of the game. It works well with the original Gamegenic card sleeves. The cardbox may be too tight for the older original Fantasy Flight Games…
A 19" rackmount for the Ubiquiti UCG-Ultra. Parts held together with screw and nut, no glue required Ignore my poor print quality. Right side appears to be slightly taller than the left in my photos (it was - my cock-up) fixed in the…
This is a remixed dashboard for the Arkham Horror LCG board game. The dashboard displays Act and Agenda Cards, the Scenario Reference Card, and collected Doom tokens, while also providing storage for other game tokens. The remix history…
This is a cooler that mounts on top of the UCG-Fiber to cool the SFP+ port. Specifically made for the WAS-110 and X-ONU-SFPP modules. You can find pre-soldered DIY fan + power module kits here: https://exen.sh/products/diy-kit-ucgf-cooler
I like to use the cardboard sliver boxes for TCG storage, but dont seem to be able to buy the single card width boxes any more These templates allow you to cut out and fold the correct shape from cardboard eg an amazon box. See the photos…
Holder for Arkham Horror "Chaos Tokens". Prevents the cardboard tokens from sticking together in the bag while being a bit smaller than the coin collectors that many folks use. I added some knurling round the outside because I fiuigured…
Update 25 October 2025: I have uploaded a step file of the standard back plate for your adjustments and ideas. Since the adhesive version of the back plates of the Xiaomi Aqara temperature / humidity / pressure or vibration sensors…
This “Digibox” can hold a deck of 55 sleeved, standard size cards. The sliding-frame can be used as a display window for the main card of the deck. A memory token is also included and can be placed inside of the main box. The three pieces…
A much better drink holder to replace the really crappy one that comes with the cart. This is a mash up of some other peoples files. I made the model a long time ago and no longer know where i got the original files. The photo is of petg.…
This is not a weapon, nor a functional part for any weapon. I designed this to aid in storage of my extra uppers by functioning as both a dust cover and a solid block to keep the bolt carrier group from falling out. I've seen commercial…
These are the SVG to STL conversions of the amazing Arkham Horror LCG Standees created by Yves Tourigny, uploaded with the artists permission. To find the original SVG files and loads of other amazing work, please visit…
Version 2 update: removed v-star shaped space to increase ease of removing v-star tokens and add versatility. A print in place dice box designed to fit into a deck box. Contains space for a V-Star token, two status tokens, six damage dice…
Quick Draw McGraw is the title character of the Quick Draw McGraw Show, an American animated television series produced by Hanna-Barbera Productions Quick Draw was usually depicted as a sheriff in a series of short films set in the Old…
Wall mount for DeWalt DCG412 Angle Grinder
This is a remix of Kemmer's Pokemon card game box over on thingiverse. This box is meant for unsleeved Pokemon cards. Please increase the scale as needed for sleeved cards. I split the middle portion of the box out so that it can be…
Remixed two deck boxes to meet what I was looking for. This Pokemon TCG deck box can hold a standard 60 card sleeved deck, 8 damage dice, 1 standard “coin flip” dice, 1 poison coin and burn coin (from here and set to 120% it will not fit…
Download Grogu Yoda baby the kid mandalorian Star Wars fanart by CG Pyro Din Grogu STL files for 3d printing collectible Support me and I delivery to you many models per month in Patreon.com/cgpyro Explore my collections in…
Wall mount bracket for Ubiquity Cloud Gateway Fiber (ucg-fiber). Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. If you prefer to have a printed version of the model, please…
There are a lot of storage options for TCG cards but nothing quite fit my needs, so 3D printing to the rescue. With bulk piling up in boxes and limited desk space for hunting for that one card I swear I had somewhere, I can't keep large…
These card boxes have been modelled after the "Return To" expansion boxes published for the Arkham Horror Living Card Game. Fantasy Flight stopped publishing these boxes a few campaigns back, so you can use these to complete your…
i made this chassis by myself to lower the center of gravity on my scx24 jeep gladiator , its lengt is universal so it will fit every scx24 everything is included in the pack , including rock sliders battery and esc mount are merged into…
I designed these mud guards for a Traxxas Slash 2wd High center of gravity chassis to keep the dirt out of the chassis. It uses the holes from the nerf bars so you will need 4 screws that are a bit longer to replace the ones from the nerf…
These tokens were primarily designed to mark the exhaustion of cards and to mark actions. The diameter of these tokens is the same as the smallest tokens in the revised edition. Note that the inner symbol is 0.3 mm higher than the top…
A storage box for Pokemon trading cards that fits gridfinity base plates. Suitable for printing in two colours to match the colour scheme of the set. STEP / Fusion 360 files are provided to allow for customisation. Slots are compatible…
Here is a really cool top loader storage box that I made. I use this to store all my really nice pokemon cards in. You can either print the little box that holds 10 toploaders or the larger one that stores 25. You can also print the clips…
Do you have a pile of shiny Pokemon TCG coins that are sitting in a tin somewhere? Print these card-sized holders and put those coins into a card binder that you will never open instead! I also included a slightly thinner version (carded)…
Status Dial for One Piece Card Game This file was designed to be print in place, right side up. There is a single empty layer between the top and bottom parts when printing at .2mm layer height. Fusing may occur. After printing, you may…
these are some modded parts from the CSGCG set. my trade of is to worry less about supports, and just have less parts, and I have added material on some places for more straight. I did notice that the trigger and safety have a different…
