Liczymy pasujące modele…
Inspired by this 3D Print by user option8 in 2015. I didn't like the 2 part construction and it did not fit my watch so I decided to update the design. Being a single piece means it feels much heavier and more solid when handling. There's…
Wydruk około 2,31 €–2,83 € nettoWstępna wycena jednego wariantu
Wall mount for Lego Oracle Red Bull Racing RB20 F1 set 42206. This mount uses two gray pins on the bottom of the F1 to hold. You can easily see this pins trough the seat for easy hanging. Print settings: Infill: 30% 3D gyroid Perimeters: 3
Wydruk około 0,79 €–0,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Conically sliced (16°) Bent Pipe for the Prusa Mini. Download the attached GCode file and directly print it. The procedure used is described here: https://www.cnckitchen.com/blog/guide-how-to-use-conical-slicing Might also work on…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
Conically sliced (16°) Christmas tree for the Prusa Mini. Download the attached GCode file and directly print it. The procedure used is described here: https://www.cnckitchen.com/blog/guide-how-to-use-conical-slicing Might also work on…
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
Holds Kart Racing gloves on a profile rig. Fits 40 series 120mm uprights on a profile rig. Uses a single M8x16 bolt to attach Has a rib that fit in the 40 series slot.
Wydruk około 6,56 €–8,02 € nettoWstępna wycena jednego wariantu
Super easy to print, supportless model. I would highly suggest to print with SILK filaments for best final look.
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
All the files that are required are downloadable and ready to print I made adjustments how the parts are printed and don't need to be changed but you can still change them if you want to use less filament. Also when assembling use…
Wydruk około 6,03 €–7,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I need to move my Elegoo Neptune 3 Pro printer to a smaller table, which is around 40 cm in depth. However, the original filament spool holder stuck out too much at the rear that I have to pull the table away from the wall to accomodate…
Wydruk około 1,47 €–1,79 € nettoWstępna wycena jednego wariantu
This has a bit of attitude. I'm not sure I could even using this ironically for myself, but for the serious sim racers among you this may be more appropriate. This has the same dimensions as my other 32 oz Camelbak cup holder. It has 8mm…
Wydruk około 7,19 €–8,79 € nettoWstępna wycena jednego wariantu
Updated: 2020-03-07 Re-Uploaded in a better format with gcode. This is a second version of the Rocinante model from the TV show "The Expanse". It has better gun-wells, better landing thrusters, and a much taller stand. Print instructions…
Wydruk około 52,26 €–63,87 € nettoWstępna wycena jednego wariantu
A fully functional Apple Macintosh Plus in a 3D-printed 2/5-scale enclosure. It was printed on Prusa 3D MK3S printers with beige PLA filament. It runs on a Raspberry Pi 4B with Mini vMac, a Macintosh emulator. The “Files” section contains…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
A good decoration for your racing corner. I've added 2 models. 1- Black and white pieces are ready for separately printing. You need glue for pasting white pieces. 2- A piece is ready for single printing with manual color changing. You…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu
I wanted an STL of a vintage car with a fair amount of details, but that is relatively easy to print. I couldn't find anything suitable online, so I took a crack at designing one myself. This is what I came up with. The finished model was…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Flipped Buhler's print in the X axis so the final product has the nice texture of the print bed facing the viewer rather than the topmost layer of the print (which always has nozzle scratches). Also scaled to 125% then rotated to still…
Wydruk około 2,98 €–3,64 € nettoWstępna wycena jednego wariantu
Video of the make The Supportless Cute Dancing Fox Figurine created by Macroglossum is now available for 3 color printing on bambustudio! Follow me on Instagram / TikTok / Facebook / Beacons Discover My Best 3D Models Axe Magnet Tank Toy…
Wydruk około 2,49 €–3,04 € nettoWstępna wycena jednego wariantu
I found a printable sign of the Prancing Pony Inn logo on Thingiverse, but not here. Since I didn't want to just rip the author off on thingiverse, I decided to make the model myself from scratch based on a sign I found online, using…
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
This is a recreation of my 'Sim Racing Cup Holder' but redesigned for M8 Bolts Cup holder designed for sim racing cockpits to hold cans and pint glasses. Drink Responsibly. Mounting to 2020 Aluminum Extrude: 2 × M8 x 15mm Socket Head…
Wydruk około 6,03 €–7,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a 3d model of the Rocinante aka the MCRN Tachi from the SyFy and Amazon Prime show The Expanse. Print instructions I started with this excellent 3d render by Anton Perfilev…
Wydruk około 34,17 €–41,76 € nettoWstępna wycena jednego wariantu
The Onyx Cinder appeared in Star Wars: Skeleton Crew. This model includes both version of the ship - the sleek republic emissary ship and the armored pirate cruiser. The wings and turrets are movable. Comes with an articulated stand. The…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
Summary Stopper for office chair for simracing and flightsimulators. Due to the round design, there is no need to adjust the wheels orientation. The model is fully parametric. A list of all variables and their default values: d_wheel =…
Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu
This is a tool to correct the angle for a triple monitors setup for sim racing
Wydruk około 0,39 €–0,47 € nettoWstępna wycena jednego wariantu
Shifter magnet add-on for your Logitech racing wheel. I tested this on a G27, but it should fit any of the newer Logitech wheels. Files: Logitech Shifter Magnets: Standard version that fits a thin M3 square nut with 1.8mm thickness.…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
This articulating flexi fidget tap dancing drama robot (named after Fred Astaire) is best printed at 140% scale for optimal bed adhesion. Fred will still articulate at 100% scale, but I found bed adhesion to be a problem without brims.…
Wydruk około 3,29 €–4,02 € nettoWstępna wycena jednego wariantu
Inspired by the SpaceX-Coaster ( https://www.prusaprinters.org/prints/88-spacex-landing-pad ) I made a coaster with the pinup girl logo on the Rocinante spaceship from the series The Expanse. As the logo is not my property please note the…
Wydruk około 2,55 €–3,12 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 12,51 €–15,29 € nettoWstępna wycena jednego wariantu
Conically sliced (16°) Overhang Tower for the Prusa Mini. Download the attached GCode file and directly print it. The procedure used is described here: https://www.cnckitchen.com/blog/guide-how-to-use-conical-slicing Might also work on…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu
Do you have a problem with loose filament ends? Change it now!!!! This tool will help you connect the fibers. Just insert two tips, heat with a soldering iron or lighter and connect. (Can be cleaned with a knife)
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
The figurine consists of two parts for a better print, the head goes to the base on a solid, no need to glue, if necessary, adjust the hole in the base
Wydruk około 0,31 €–0,37 € nettoWstępna wycena jednego wariantu
This is a remix to accommodate the larger size bottle (4 fl oz, 118 ml). Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Eryone PETG White Category: Household
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Apple Macintosh 512K Model M0001
Wydruk około 16,76 €–20,49 € nettoWstępna wycena jednego wariantu
The mounts are designed for handlebars + handlebar tape with a diameter of 40mm and increased ground clearance. I printed whit PETG them with 4 perimeters, 10% honeycomb infill, without top and bottom layers.
Wydruk około 2,36 €–2,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It changed the future, now always in your pocket...the Macintosh!! Print monitor.stl first (it will be add on macintosh.stl or macintosh V2.stl files) Use glue to fix keyboard on macintosh.
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
This is a case designed for an WS2812B RGB Module and an Arduino Pro Micro, as per amstudio's great explanation video at https://youtu.be/4oywox9-B-o . This provides real-time information for sim racing drivers such as the current gear in…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
"Dancing Woman" 2D Wall decoration Use only one perimeter for optimal results.
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
El Chombo : Dancing Green Alien
Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu
Background I've been using automotive axle/chassis stands to balance my motorbike wheels (with the axle simply resting on two stands). I thought I'd design a cradle that sat on top of my (SuperCheap Auto) axle/chassis stands that would…
Wydruk około 6,24 €–7,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Reducing adapter from 40mm to 3/8, 1/2, 5/8, 3/4, 1 Reducing adapter from 32mm to 3/8, 1/2, 5/8, 3/4, 1 Use Petg or other more durable filament For better strength, give more perimeters - 4-5 , and for adhesion to the printing plate, use…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Portafrutti bticino anni 80 per presa 10A e schuko. Il modello è leggermente modificato rispetto all' originale per stamparlo meglio. Impostazioni di stampa: Layer: 0.2 mm Perimetri: 2 Riempimento: 15% Supporti: si
Wydruk około 1,92 €–2,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Caja rectangular para montaje en superficie de interruptores y enchufes Bticino Living Light
Wydruk około 3,17 €–3,87 € nettoWstępna wycena jednego wariantu
Molecular surface representation of a nanopore (PDB ID 6si7 ) together with the bacteriophage phi29 DNA polymerase (PDB ID 1xhz ) and a piece of DNA. The nanopore and polymerase are sliced in half and have locations for magnets, while the…
Wydruk około 6,93 €–8,46 € nettoWstępna wycena jednego wariantu
This is a Raspberry Pi4 enclosure in the classical Apple Macintosh SE style. In addition to Pi4, the following components are selected & installed: Waveshare 4inch square LCD ( https://www.waveshare.com/4inch-dpi-lcd-c.htm ). Geekworm…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
A hook developed to help open doors without the need to touch them. I developed this part to be used at work where it is important to take every possible step to social distance. The design incorporates two main features: A hook to pull…
Wydruk około 3,68 €–4,49 € nettoWstępna wycena jednego wariantu
Buse composée d'un écrou et un coude pour filetage Intex diamètre 82.
Wydruk około 4,38 €–5,35 € nettoWstępna wycena jednego wariantu
9 boutons 16 MM led 9 buttons 16MM led https://www.amazon.fr/dp/B076XT214C?psc=1&ref=ppx_yo2ov_dt_b_product_details Ou 9 Boutons sans led Or 9 Buttons without led…
Wydruk około 4,41 €–5,39 € nettoWstępna wycena jednego wariantu
I made my own version so it prints in the strongest orrientation unlike any i could find. I printed it with 100% infill with 4 walls. (7g and 50min on MK3S ) I added the .f3d file so you can make your own version. Just add two zip ties…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I remixed this awesome design by @Dustin to enable MMU3 printing on the same layer. Printed on a textured print sheet to help hide any layer lines. If printed on a PEI smooth sheet, you can touch it up with a heat gun to get rid of any…
Wydruk około 1,82 €–2,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Courier of Enzo Ferrari The 1950s and 1960s are known as an era that witnessed a boom of race car transporters, which are being re-discovered today and held in a high regard. The two similar-looking transporters of the Scuderia…
Wydruk około 4,92 €–6,02 € nettoWstępna wycena jednego wariantu
💬 Summary A set of rear wall spacers designed for Logitech G920 racing pedals . These structural bumpers create a necessary gap between the pedal unit and the wall, ensuring that the connection cables are not crushed, bent, or damaged and…
Wydruk około 1,20 €–1,46 € nettoWstępna wycena jednego wariantu
Description The game challenges players to stack dice to form a tower, offering fun for both children and adults. 21 (or more if you print more for harder challenge) dice are evenly distributed, and players take turns rolling no more than…
Wydruk około 8,37 €–10,23 € nettoWstępna wycena jednego wariantu
GEPRC Cinebot 30 GoPro mount with integrated mount for TBS M8.2 GPS module Remixed “Cam mount for GEPRC Cinebot 30 (Gopro 8 9 10 11 12 & DJI Action 2)” form Lenny B FPV The picture shows the part printed with Prusament PETG, 0.15mm, 100%…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
At least a fourth generation remix of an awesome multipass model. My remix comes from the remix by Scotland who adapted it to fit the CDC vaccination cards. I didn't have a steady enough hand to paint them well, so I separated the…
Wydruk około 4,88 €–5,96 € nettoWstępna wycena jednego wariantu
Krabička je tisknutelná v kuse s podpěrami především na místě pantů. Rozměny jsou 110 x 80 x 12 mm. --- The box is printable in one piece with supports especially at the hinges. The dimensions are 110 x 80 x 12 mm.
Wydruk około 3,18 €–3,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A jerry bear keychain that I made for my uncles birthday present. I figured that I'd upload it here because why not Add layer pause at 9 to change filament colors I printed with the Ankermake m5c and turned on ironing, the jerrybear was a…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
The Big Einsy case is an awesome concept. This remix addresses the issue of being able to easily access the frame fixing screws, especially after assembly. A channel against the frame has been opened up to route a +5V power cable up to a…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Microsoft LifeCam Cinema Camera Mount is a great option for those looking to monitor their 3D prints. This camera mount is designed to work with the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 by Sneaks , providing a…
Wydruk około 1,48 €–1,80 € nettoWstępna wycena jednego wariantu
I love how relaxed I feel whenever I spin my fidget. Then it hit me — why not make something dance around while it spins? So here’s what I came up with: a remix model with dancing foxes that twirl as you spin! 🦊💃 The model is separated…
Wydruk około 2,19 €–2,68 € nettoWstępna wycena jednego wariantu
I use daily disposable lenses, so I go through a lot. Got tired of using the flimsy cardboard boxes and made a fancy plastic one. Printed in Matte White PLA. No Supports needed.
Wydruk około 5,10 €–6,23 € nettoWstępna wycena jednego wariantu
This is a model of the Latissa Police Precinct from The Owl House. This building later became a hospital. Likewise, this model comes in two variants - police precinct and hospital. The model is at 1:270 scale. It is 166mm wide, 130mm…
Wydruk około 9,51 €–11,63 € nettoWstępna wycena jednego wariantu
The provided 3MF File is prepared with all my modifications. The Back Part needs Supports for Printing After Printing the Back Part, you need to punch through the 2layer supports for the M8 screw (if you want to use this Fixing Method) I…
Wydruk około 4,04 €–4,94 € nettoWstępna wycena jednego wariantu
Dive into the world of de-icing with this unique windshield scraper! Inspired by the robustness of a backhoe shovel, this scraper is designed to tackle the toughest winter conditions. Its ingenious design offers an extended de-icing…
Wydruk około 7,01 €–8,56 € nettoWstępna wycena jednego wariantu
I had to remove the speaker from the faceplate of my SE/30 and was looking for a simple, non-permanent, adhesive-free way to reattach the speaker. This simple washer sits firmly on the metal speaker frame and allows the metal chassis to…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After doing this model — Dancing Foxes with Rotating Stand (No support) by TernMaker | Download free STL model | Printables.com — I thought I could do some variations of the decorated planetary gear on the desk. I know that it's not…
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
This is a cutter and a pusher in the shape of a dog paw. You need to use the cutter to cut the icing, and then use the pusher to push it on to the cake.
Wydruk około 0,93 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
imprimir calidad 0.2 relleno al 15% sin soportes
Wydruk około 2,28 €–2,79 € nettoWstępna wycena jednego wariantu
Ender 3, CR10, Sunlu S8 and many more printers have 2040 or 4040 extrusion bars on which the z-axis stepper motors are attached. This univeral mount does: Allow you to align the distance beweetn the stepper motor and the z-axis (common…
Wydruk około 5,34 €–6,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A fun spinning tree surrounded by kids. Print instructions 3 different files Base and Kids printed at .20mm no supports Tree printed with supports (upside down) Use a skatebaord bearing on the base for spinning.
Wydruk około 0,40 €–0,48 € nettoWstępna wycena jednego wariantu
Make a desk lamp from USB LEDs and swivel the shade to use it as diffuse light source for video calls! You can use an LED panel or LED strips. I recommend USB LED panel pulled out of an off-the-shelf amazon video conferencing lights for…
Wydruk około 1,14 €–1,40 € nettoWstępna wycena jednego wariantu
Simple GoPro mount for the iFlight BumbleBee Cinewhoop. Made with PLA/PLA+.
Wydruk około 1,29 €–1,57 € nettoWstępna wycena jednego wariantu
The headset hanger clamps around the openings of the Next Level Racing brand simulator chair. There are several shims available to ensure a snug fit despite manufacturing variations in the chair. Not all are needed, you may print just the…
Wydruk około 12,62 €–15,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This pocket protector is designed for use in a lab coat, where small objects like pens and screwdrivers can fall out of a pocket causing contamination of the workspace or damage to equipment. Or, items in the pocket can poke holes or leak…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
With effective cooling, your computer becomes a racing machine. This very concept inspired this style—I know air cooling isn’t the same as water cooling :-), but thematically it fits perfectly.
Wydruk około 7,33 €–8,96 € nettoWstępna wycena jednego wariantu
The keystick is printable mechanical linkage that converts 4-way key actuation (2, 4, 6, 8) into a central joystick move . Context and motivation This proposal is based on an old idea from Spain's Centro de Referencia Estatal de Autonomía…
Wydruk około 0,80 €–0,98 € nettoWstępna wycena jednego wariantu
Remix cinknuté kostky s padající 6. Zde padá častěji 1.
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Impresora: Ender 3 S1 pro Maerial: PLA 1.75
Wydruk około 8,96 €–10,95 € nettoWstępna wycena jednego wariantu
Drago Cinese
Wydruk około 0,79 €–0,97 € nettoWstępna wycena jednego wariantu
Je me suis inspiré de ce modèle trouvé sur Amazon : Baxcdyswe 8 Pcs Cintre Gain de Place
Wydruk około 1,07 €–1,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This design was heavily influenced by the fencing weapon tester by Yafra7, but I wanted to implement some changes to make it easier to print, hold the components in place securely and to fit the components available to me. the electronics…
Wydruk około 3,85 €–4,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Creating your own stamps You can create your own stamps using an SVG file directly in PrusaSlicer: First, download and open the Stamp Blank Template.stl in PrusaSlicer. Then, use the SVG emboss tool to import your SVG file and create your…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu
parts for the mmu enclousure printed in one piece gcode with input shaper and prusament petg
Wydruk około 7,10 €–8,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ruedas para cajones de cocina
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacing pat for Korum Speed fit tripod adaptor Speedfit Tripod Adaptor . Printed from PETG and reused original screw from broken parts.
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple to assemble and play, challenging to master. In one-player mode, try to hang as many vines as possible without the trellis tipping over. In two-player mode, win by being the last to hang a vine without the trellis tipping over. The…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Alternative set of hollow pieces for HedronStack balancing game. You can see through them, if you print with transparent filament, you may be able to see through the sides partially as well. You can either replace original pieces with the…
Wydruk około 2,33 €–2,84 € nettoWstępna wycena jednego wariantu
Black Mesa - bTicino Living Now Remixed from https://www.printables.com/model/830927-super-mario-bticino-living-now
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
A multi-colour Aprilia Racing coaster printed in PETG. 15% infill 0.2mm layer height 0.4mm nozzle
Wydruk około 1,41 €–1,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Jon Hamm "Turn The Lights Off" HueForge Portrait The Meme : This portrait captures Jon Hamm's iconic club dance scene from Apple TV's Your Friends & Neighbors (S1E8), which exploded as TikTok's "Turn The Lights Off" trend in late 2025. In…
Wydruk około 3,05 €–3,73 € nettoWstępna wycena jednego wariantu
This compact organizer is designed for pets on daily liquid meds. Great for households with multiple caregivers or anyone needing a simple visual reminder system. Remember to reset the sliders each morning to keep dosing consistent! It…
Wydruk około 5,26 €–6,43 € nettoWstępna wycena jednego wariantu
Printed in Prusament PETG, 0.4mm nozzle, 0.20 mm layer height. To avoid using any support, here is the method I used : On your slicer, cut the model into 2 parts : the outer rim and the basket grid print them in one row glue the 2 parts…
Wydruk około 4,51 €–5,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Template for making heart shapes on top of cakes. Made for spring forms with 22cm diameter. Šablona pro tvoření tvarů srdce na dortech. Určená pro dortové formy s průměrem 22cm.
Wydruk około 1,00 €–1,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Robot Select de maytronic
Wydruk około 0,74 €–0,91 € nettoWstępna wycena jednego wariantu
This keyboard backplate fits the original T-Deck Plus case. You will need to extend the cable coming out of the speaker, you can then route it through the same hole as the flex cable for the keyboard. For holding the keyboard in place I'm…
Wydruk około 1,60 €–1,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ho una Prusa i3 MK3S+, ho riparato il macina pepe/sale ikea
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
Balancing Brushes and Bibliographies: My Take on Academic Support (With a Little Help) There’s this weird limbo zone I seem to exist in lately — where half my life is color palettes, concept sketches, and last-minute Photoshop saves, and…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
This model is based on Herose anti-icing shield originally made from steel and aluminium "Type 50155 - Anti-icing shield for Cryogenic-Globe Valves with 2 yoke rods". Simple holder is included as one part. For mounting are required: 2x…
Wydruk około 6,20 €–7,58 € nettoWstępna wycena jednego wariantu
Voici une aide pour le remplissage de la piscine "INTEX" imprimé en PETG, accroché sur la margelle de la piscine, sans outil juste un effet d'appui contre appui, un filetage est prévu pour visser un raccords type Gardena.
Wydruk około 12,72 €–15,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Honeycomb Wall parts I designed, I also created my own Screw Wall that is much stronger and many more available tool holders (over 300) check it out! Thanks for looking. Screw Wall now has over 50 Club subscribers! I also have created…
This splicing jig makes quick work of joining filament ends. Use a soldering iron tip to melt the ends of the filament segments and then shove together for a perfectly aligned joint. Then clean up the joint with file, razor blade or…
This is my Rocinante model which is supposed to represent the Rocinante ship as it featured in the very last episode of the season 6 of the show Expanse. It has CSL plating, railgun, PDCs and torpedo tubes. The model is 50cm long and has…
Always wanted a simple tool for joining filament pieces together - when the spool runs low or to join DIY multi color filaments ( Easy Multi Color Filament ). I remixed LoboCNC's fine Filament Splicing Jig : Added compliant hinge to make…
Tired of untangling a web of wires every time you need to charge your devices or connect peripherals? Say hello to the solution that will revolutionize your cable management – The Ultimate Portable Rotatable Data Cable Organizer Storage…
