Creme Fraiche Lid
PETG 0.15 mm layers 0.4 mm nozzle 4 perimeters 6 bottom layers, 4 top layers 15 % infill (only affects the pull tab)
Wydruk około 0,24 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 69
- Polubienia
- 3
- Ocena
- 0
Liczymy pasujące modele…
PETG 0.15 mm layers 0.4 mm nozzle 4 perimeters 6 bottom layers, 4 top layers 15 % infill (only affects the pull tab)
Wydruk około 0,24 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These are CAMLOCK compatable nozzles from 20mm to 80mm (in 0.5 mm increments). They are compatable with the awesome and award winning CAMLOCK Connector by @peterh . Hints: You may want to flip the prints to have the wider diamater ends on…
This is a calibration strip I have started using. It is similar to other notched strips except I have modified the g-code to automatically increment though a range of live-Z offsets. It starts printing at +0.1mm above the live-Z setting…
A tolerance test to see if you can print bearings. Most of my bearings are 0.2mm tolerances because thats what seems to work best. This test is incremental by 0.02 and based on my round test. UPDATE: Added an attempt at a model with some…
Compatible with M3*8 screws with a spring washer and washer. Uses M3 screws for every hole I printed mine without supports or rafts. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter…
This lids for various round plastic cups (yogurt, skyr, creme fraiche etc.) include cup sizes 75mm (200g), 94.5mm (500g) and 95.2mm (300g Aldi Körniger Frischkäse) and are designed for printing with TPU. The dimensions are defined so that…
Start by following the steps/using the original gcode from jkoether : https://www.printables.com/model/360303-auto-incrementing-first-layer-calibration . Once you have chosen the best live-z setting using his original gcode, then use the…
My creme egg 3d printed lock box design. A fun way to keep your Easter chocolate safe from unwanted hands. A combination lockable storage container for creme egg sized items. This was very fun to design, I kept it super simple but the…
Incremental Marking Gauge for 1-200mm with holes for 2,8mm graphite leads like Pica Dry Marker
Gedruckt wurde der Pott auf einem Prusa MK4 mit 0,4er Düse, PETG. Der Pott hat ein ISO-Gewinde. Schriftzug “Creme” Der Deckel wurde auf dem Kopf liegend (Schriftzug nach unten) gedruckt. Kein Stützen erforderlich.
Made a cake creme scraper to my wife. So she can make some pattern in the cake creme. Made it in TPU, so its a bit flexible. MK3S+. Infill 100%. Layer 0,15mm Fil TPU98A
Cadbury Creme / Caramel Egg - Easter Egg Rabbit Bunny Nice easy print to have fun for Easter. Holds Cadbury's Creme Easter Egg, also Caramel version also. Other eggs can fit if you resize the model down or up. Have Kinder Surprise model…
Description: My Sculptor 078s gets moved back and forth between drip and espresso range quite a bit and I was having trouble getting back to exactly where it was previously. Not anymore! Stock “step size” according to Timemore is 28 μm…
https://cad.onshape.com/documents/efd830be1de9577ec73c02b0/w/de4ed777609cf3503e3b7457/e/c6fa6f21c00a8d6d9d3f0f53?renderMode=0&uiState=6495903704291418787e5376 I have placed a link to the original document above so that you can copy and…
Tool to see what the margins of the printer and the used filament are in order to create perfect press/tight/loose-fit parameters. Update 2023-05-20: added 0.05 offset to Window and to Pin
You don't need to be that precise when sowing your seeds, nonetheless, I like to be consistent with my sowing depth. The larger end of this dibber has 5mm increments. Push in to soil up to a line, the number visible above the line is your…
Quick remix of my stencil for folks who want 5 degree increments
I liked the Incremental Marking Gauge but it comes in a single size so I made it customizable/parametric It uses the Belfry OpenScad Library v2 (BOSL2), check this link for download and install instructions:…
Thickness gauge from 1-20mm with steps on top and side. Includes a ruler on the side as well and a hole for storage. Use this tool to quickly find the small gap between two objects, you can also rotate the tool to find larger gaps between…
stackable Lid for lidl creme brulee https://sortiment.lidl.ch/media/catalog/product/cache/38c728e59b3a47950872534eff8a1e63/4/8/48618_PSXX_1.jpg
Drill bit holder 1-10mm in 0,5mm increments no assembly needed Easy and fast to print no support 20% infill and 3 walls
Ever wanted to display your Cadbury Creme eggs? Now's your chance! I recommend printing at 20-25% infill just to make sure the middle doesn't snap. No supports needed apart from the cut out at the bottom but it's not really necessary. I…
Drill bit holder made to be wall mounted but still be easy to remove and put back on with a simple hanging system
voila, un couvercle pour un pot de creme de marron de 500g d'une marque bien connue. fichier FreeCAD comme d'hab Category: Kitchen & Dining
My wife wanted to reuse these glass Marie Morin Creme Brulee jars from from Costco. However, there were no lids… so you see where this is going. There are 3 versions: V1 - This isn't really a watertight seal, but would work great for dry…
Yet another (skin creme) squeezer. It's a remix of the "Yet another toothpaste squeezer (keeping it simple)". Thanks to BartPe ! :) V2 - The hole is tighter
This is a rounded corner template designed for sewing, patchwork, and pattern making . Or for whatever you want to use it for. It includes multiple corner radii from 5 mm up to 75 mm , spaced in 5 mm increments , allowing you to quickly…
the original is lost .. so make a new one :-D -- gebastelt für eine Traumeel 100g Tube pitch 1.22 mm 13mm / 12mm Category: Bathroom
Receita Leite Creme 1 Litro de leite; 7 Colheres rasas de açúcar; 5 Gemas de ovo; 4 Colheres de sobremesa rasas de farinha Maizena; 1 casca de limão; 1 pau de canela; Levar o leite a ferver com o pau de canela e a casca do limão.…
I made a small box/container for creme or pills. The box have screw cap. Print settings: 2 layer 15% gyroid infill print two objects - see the 3mf file no supports needed
You will also need: M3x12 hex socket head cap screws (DIN 912 = ISO 4762) M3 nuts. Printed in PETG for more flexibility. The insert only holds depth stops of 1,5–13 mm
I could not find a model that doesn't take as much material to print as a plain board while also be able to utilize a larger bed size. So I used the existing oval features as cutouts, which also serve to give finer control over attachment…
This model lets you easily incorporate a rotary encoder into your Lego Tecnics mechanical designs. The gear is a press fit onto the encoder shaft and the shaft is centered on a Technics pin location for easy meshing. Designed to fit…
Marking incremental gauge used in woodworking. It starts at 5mm and ends with 179mm. Gap in handle is big enough for your fingers to hold it firmly. Holes are 3mm in design. I suggest print gauge with numbers facing to the bed and first 2…
A modification of the Control Ring from 3D Printy's Mechanical Counter Prototype.
This is a simpele ointment or creme tube container. The tube got often damaged in a handbag. This will help protect it. It will store tubes of 35mm wide and 140mm long. The cap is snap fit so it does not come loose in the bag.
petite boite à vis pour mettre de la crème ou ce que vous voulez
1-8" Circle template in half inch increments
My little iterations for skadis pegboards. Sizes go from 212x202mm down to 92x82mm. Spacers can be used to have enough clearance when installed to a wall with screws. Printing: 0.2mm is good, no suports needed
This is for this handcream alverde NATURKOSMETIK Feste Handpflege mit Sanddorn-Duft, 25 g dauerhaft günstig online kaufen | dm.de as it get quites oily fast in the paper box. Put in a M2x20 through the back and tighten it not too hard,…
NIVEA Creme and Labello holder for Skadis
60mm Diameter Incremental Encoder Wheel - 36 Hole
Those small notches indicate the center of the holes. This makes it easy to align the center with pencil marks. I designed this because I wanted a drill guide to accommodate all the sizes from my drill set. I decided to print it with the…
To get your Crème collection box on display.
Jar stacking ring designed for the Aldi Specialty Selected Creme Brulee glass jars.
Кейсы для сверл печатать с древовидной поддержкой от стола в рабочем положении (нижней частью на столе), верхняя часть где будет ходить задвижка в поддержках не нуждается. печать PLA или Petg слоем 0,2 сопло 0,4 Drill cases are printed…
This 3D printable capsule holder is designed specifically for Cremesso coffee pods. It keeps your capsules organized, easy to access, and neatly displayed in your kitchen or coffee corner. For installation, you can attach it however you…
Please click if you appreciate my work :) Texture inside Commercial License >> cults3d.com
Die Halterung kann mit 2 Schrauben (bevorzugt Torx 😉 #gebtkreuzschlizkeinechancemehr) an der Wand oder auch am Balken befestikt werden. unbezahlte Werbung Bei Dercusan handelt es sich um ein Unternehmen, welches Hautschutzprodukte…
Squeezer for shaving creme and other tubes
Replacement part for old pastry syringe
Inspired by Michal Blazek's (@mibla_44019) " Radius gauge 1-20 mm", I wanted to have a tool that matches the original but it's used to measure gaps / widths / distances. The tool was designed with the alignment of car body panels in mind,…
Holder for tear bags up to 200mm wide Due to the free movement of the spikes, it is possible to fasten even smaller romer bags. It can also be easily adjusted in case of misaligned holes on the bags. The cover is removable and holds with…
Lids for cream jars (glass diameter 66 mm). PETG is recommended—but PLA works as well. Feel free to support my work and leave a tip.
Identical to https://www.thingiverse.com/thing:3124796 , but this one allows you set the measurements in 0.1mm increments Category: 3D Printer Parts
200m Diameter Incremental Wheel - 18 Hole
Disclaimer: If you print this a fdm 3D printer (which you probably will) it might not be so accurate, especially for the smaller semi circles. Also, I don't recommend printing this with a material that has a lot of thermal expansion (such…
You can grab a Pebble HF in the US from Mike & Becky (HamRadioDuo) or from myself in the UK/Europe (and further afield) . This should print without any supports. I print mine in PETG which I make sure is dried before use. Lettering for a…
This is the motto of the Goldenholz Epilepsy + Data Science Lab, but it is so cool all by itself, I thought I would share it with others who might be inspired by it. It means we NEVER stop trying to do better. To print this, I used PLA in…
Simple reusable lids for common Crème Brûlée dessert glasses. Perfect for covering desserts, leftovers, or small food portions in the refrigerator two sizes of top diameter: ~ 55 mm ~ 65 mm I printed them in PETG with a (colorchange) TPU…
When you need an exact fit. Calipers are great for measuring, but they can't predict print tolerances, filament shrinkage, etc. Print these gauges and know precisely how big you need to make holes. Also great for using up near-empty…
Der große Kreis hat einen Durchmesser von 70mm und die beiden kleinen jeweils 35mm. Ich habe es aus TPU gemacht, kann aber natürlich auch aus anderem Material gemacht werden. Infill: 100% Linien Layer height: 0,15 Daten sind für TPU auf…
This is useful to check before printing very tight moving parts. No support needed. Print at your regular temperature and walls. I used 3 walls, 5% infill. After the print, try to slide a very thin sheet of paper in the slot. The shape is…
This stepped laser focus gauge is designed to quickly find and set the correct focal distance between a laser module and the workpiece. Each step represents a different height, allowing you to test multiple focus distances without using a…
Ersatz-Abstandshalter für historische Trainingsstationen / Gerätetürme, für die es keine Original-Ersatzteile mehr gibt. Dient als definierter Zwischenabstand am Gewichtsblock der Beinpresse, um die 10-kg-Gewichtsabstufungen sauber zu…
Add a sweet finishing touch to your 3D-printing setup with the Creme Caramel Spool Cap ! This cap features a playful caramel-inspired design with rounded details and a fluted finish, making your filament spool stand out from the rest.…
This model lets you easily incorporate a rotary encoder into your Lego Tecnics mechanical designs. The gear is a press fit onto the encoder shaft and the shaft is centered on a Technics pin location for easy meshing. Designed to fit…
Disclaimer: If you print this a fdm 3D printer (which you probably will) it might not be so accurate, especially for the smaller semi circles. Also, I don't recommend printing this with a material that has a lot of thermal expansion (such…
I made a small box/container for creme or pills. The box have screw cap. Print settings: 2 layer 15% gyroid infill print two objects - see the 3mf file no supports needed
This 3D printable capsule holder is designed specifically for Cremesso coffee pods. It keeps your capsules organized, easy to access, and neatly displayed in your kitchen or coffee corner. For installation, you can attach it however you…
You will also need: M3x12 hex socket head cap screws (DIN 912 = ISO 4762) M3 nuts. Printed in PETG for more flexibility. The insert only holds depth stops of 1,5–13 mm
This is a rounded corner template designed for sewing, patchwork, and pattern making . Or for whatever you want to use it for. It includes multiple corner radii from 5 mm up to 75 mm , spaced in 5 mm increments , allowing you to quickly…