3733 modeli
All forbidden bricks !!! Comment wich other types you want to see !!! Don't forget to check illegal bricks 1.0 !!! Make shure to use qualitative filament All step files are included in case of tollerance issues (adjust per 0.1 mm)
Compatible with standard garden hose fittings Mounting plate with holes for secure attachment to wood with zip-ties, screws or any other method Included broom stick adapter for attaching to broomstick shaft or anything similar. (use…
This print allows to elegantly mount your Bosch eBike Charger to the wall, out of the way, right where you need it. I made this version because several people indicated that they liked my eBike Charging Station but preferred a standalone…
I was looking for a decent G3 instant corner mount that allowed me to hide the power cable. I really liked the design of Tadufeu but it lacked the feature to hide my cables so I created a remix for this purpose. Don't mind the finish off…
This is a regular old egg that unscrews to reveal a hidden compartment. It could be used to store candy for an Easter egg hunt, or to hide very small quantities of treasure.
Magnetic insert with hidden three 6mm magnets with arbitrary thickness. Magnets should not need to be glued, they should hold by the friction (mine do). Even with “standard” 6x2 neodymium magnets (e.g., usable with Gridfinity) it can hold…
I made this bracket is to be mounted on the steering column on my Segway Ninebot Kickscooter MAX G30D II (Please note that im on a beginner level, when it comes to designing parts in fusion 360) Its a tight fit around the steering colom,…
I love Prusa Research, their company philosophy and mindset. However, I do like my printers clean and logo free though, so i adapted my top mounted LCD to not show any logos. I also deletd the speaker cutouts, as the speaker is already…
Updated to print in less than 2hrs. Cleaned up to handle 8.5x11 sheet of transparency film and a change to the bottom support to accept the thin film. Uses 3 hooks so that a paper hole puncher can be used on the shield transparencies.…
Heyya all, So, this is my first attempt at making a movable 3d print so it's not perfect. I made it have End caps for the movable parts so it should be gluten-free, but I'm not 100% sure about the fit. this should be like a little really…
A bracket to mount a Rubbermaid foldable stepladder onto the wall. The inner width of the bracket is 30cm, and the two screw holes are inset and work with standard #6 drywall screws. The top screw hole is angled downward for extra…
Here is the door hinge side
Support for fixing the MMU buffer on top of the Enclosure. Top plug with 5 holes for the filament pipes.
Helps push bits of stuck paper through a shredder - scale it to fit your shredder!
Suitable for Deuter Strammer water bladders. https://www.deuter.com/de-de/shop/zubehor/c27998-trinkblasen 4 x 8x2 mm magnets are needed When slicing, add a print pause each time to insert the magnets. Pay attention to the correct polarity.
SBACH 342 EPO RC airplane repair kit for rudder mounting rudder mount for 12x16mm hinges back wheel steer base For 12x16 mm hinges If you like it, please support me: Paypal: [email protected] Skrill: [email protected] ★…
Hello friends from all over the world :) This is a piece of art. Handmade in a craft bakery. You can print it in different sizes. I scaled it down to use it with a keychain or for decoration, but you can also print it in original scale.…
This tricky birdhouse gadget cache is designed for one of our personal geocache hides, but it can easily be adapted for your own creative setups. It combines a visual red herring with a clever magnetic/nail-based locking mechanism, ideal…
Replacement armrest for ODDESUND outdoor furniture by Jutlandia. The armrests are ~65cm long, so they typically does not fit in small ordinary printers, that is why i have created two versions: Armrest full length, file: Armlene -…
Thank you for downloading and liking the model! Your support means the model reached the 400 downloads in one month milestone ! 🏆 As a thank you, Version 2.1 adds a prop silencer attachment. New prop of the SCCY CPX-2 9mm handgun. This is…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) THE SKELETON HEAD ROSE /…
Commercial license for all my models -→ https://www.patreon.com/MeasureOnce New assemblable version available on Makerworld https://makerworld.com/en/models/2624847-infinite-jacobs-ladder-toy#profileId-2897666 DO NOT SCALE. There is 0.4mm…
I recently needed some small trophies for different categories, so I came up with these. They are small and need only ~4g of filament (plus 5g for the simple base). Scale as needed, but I doubt it's well suited for much bigger size… (I…
All forbidden bricks !!! Comment wich other types you want to see !!! Make shure to use qualitative filament All step files are included in case of tollerance issues (adjust per 0.1 mm)
AirTags are a great way to keep track of your valuables, especially while traveling. An AirTag thrown in your suitcase, or hanging from the handle of your bag will provide some peace of mind, and make it easy to recover misplaced luggage,…
Thanks to @TonyYoungblood for the original dragon egg model here: https://www.printables.com/model/173584-solid-dragon-egg-remix-of-my-threaded-dragon-egg. UPDATE : I fixed the .stl and .3mf files and tested in Bambu Studio 1.5.0.61,…
Thanks for downloading my model. If you like it and would like to help fuel my designs I'll welcome a coffee donation :D thanks! https://ko-fi.com/supermatt The clear plastic card holders we use at work just don't last. I designed an ID /…
Designed with the support and contributions of the “Recreator 3D” Discord community. This design uses a router bit as the main cuter. Has support bearings on both ends of the cutter for added support and tool longevity. Uses a small cheap…
For anyone wanting a list of the files needed i have a doc (doesn't include print amount) https://docs.google.com/document/d/1nySoxtG5XoBjlk5sZv3u3DVSpDoLBxbjunxaP5nJMEs/edit?usp=sharing power move: use ChapStick to lubricate the parts…
Looking for a storage box that perfectly fits your needs? This fully parametric sliding box lets you customize almost every aspect of the design directly before printing. Whether you need a compact organizer for screws, electronics,…
New! Version 2 is up, with a more robust ladder kickstand :) As seen on HotMakes episode 148, it's a little firetruck with a hinged ladder and chunky wheels! Video link: https://www.youtube.com/live/jzZMH5YQIHc?feature=share Gratuitous…
If you like this project please do press the like button above. It really helps me out. Thank you. 😊 I'll show you how to build a very smart looking shelving system that includes a hidden giant clock in the edges of the shelves, and…
It cleans the nozzle every Time in get parked. Also great for Tool changer, since it then cleans every Time.No need to adapt gcode or Change the settings! 13.11.2023 Added 2x redesigned and optimized (for 0.6mm nozzle) debris buckets…
I have generated this collection and it contains several variations of the Gridfinity baseplates and bins. This will continue to be added to so please follow to keep up to date. Thanks Griddex
I made this handle curved-base to replace the original handles in my caravan. Printed in PETG, this piece is really strong and should withstand the elements. The original handles had a system to hide the screws using a flexible tab that…
These are all the parts I created to mod the Prusa Lack enclosure V2 to fit the ender 3. Most of the parts can be found in the Prusa build here: https://www.prusaprinters.org/prints/3673-prusa-enclosure-v2-mmu2s Wood screws:…
No support needed. Fits 6 switch games :)
So, I had purchased some of those decorative “floating” shelves from the local bigbox hardware store. Then when I went to install the shelf, I realized how cheap this stuff is and how bad the design of the hidden bracket is. I felt as…
All forbidden bricks !!! Comment wich other types you want to see !!! Make shure to use qualitative filament All step files are included in case of tollerance issues (adjust per 0.1 mm)
Update: April 20, 2026 I added more sizes per requests. Update: February 26, 2026 Per a request, I added the 80mm version and 165mm files to this. If anyone needs any other sizes, please let me know. Thanks! I like the original design…
simple, basic lid raiser for Creality K2 plus Raises the glass lid by 40mm so that the bowden tube no longer rubs against the glass. Adds the option of ventilation. The ventilation sliders are inserted into the front, back and side…
Greebles Part 2! Entry panels, hatches, and more! No support required The code and model files are using “Hatchbox” pla. Change if you are using something else (trying to use up what I bought a few months ago.) Use variable height to…
Do not eat the forbidden fruit! Perfect decoration for Halloween. You can find the 3MF version ready to print.
A lovely greek madame.
This was inspired by Zack Freedman's Gridfinity project. My take on a Micro SD card holder for Gridfinity. I created using Onshape . Added step file for easy changes.
Saw this silly thing on IG (https://www.instagram.com/reel/C2FxIc6pKIZ/) and decided to make one of my own just for the fun of it :) Prints with no support and uses 6mm magnets.
Another 3D printed shelf but with a secret! 🤫 Ok, maybe not that big of a deal… But it's super handy! After mounting with 3 countersunk screws, the top half snaps on very satisfyingly and slides out with a hard stop to avoid falling off.…
Introducing the ultimate hunt, the Slaughterspine from Horizon Forbidden West! This machine is to scale with the official board game and stands on a 120mm base. It has been split into a few, easily printed parts that come together without…
Just "discolored" remix with added brim on selected areas
Háček na radiátor do koupelny. Nutné tisknout z PET_G kvůli teplotě radiátoru Udrží i velkou mokrou osušku
I modified the original and fantastic idea from wolffaayyy here on printables. I modified the sheet mount, so that it only has 2 Steelsheets instead of 3 (most of us will probably only have 2. Also a modified it with a better tray…
There is an updated bin design which has latching lids available at the links below (under “Other Stuff”). The version here does not latch closed (it was never intended to have that function, and only has a tab). Update - 2/20/2026: If…
this simple printed hinge I made for my filament enclosure side panels on my trident 3d printer can be used for anything really ITEM QTY M3x8 3 M3x12 4 M3 Washer (0.5mm thick) 14 STEP and .F3D available, (.F3D has joints in the file so…
ENGLISH Now printable without support and with a crank! I modified it so that it can be printed without supports. The crank and gears were moved to the front to make it fit better in the drawer. V1 has a crank and, like the original,…
I modeled this after the box art of the tabletop game Forbidden Island. The tower is hollow so you can add a LED inside, the base has some room for a battery but it's not specifically designed for any particular setup. There are files for…
Box for hepa filter and activated carbon pellets for the Creality K2 The K2 Plus already has a carbon filter installed, but it is only partially filled. I also wanted to have a hepa filter on the housing and came up with this design.…
Dummy 13 storage cases don't have room for accessories! This solves that problem. Remix of original case by Lvnatic with added room when different hand variants are used. I also made an additional accessory box and a lid. They are…
simple model of a dragon skull for decoration. The skull can be placed on the stand or hung. (See pictures). If you don't need the stand, simply leave it out. scale: I have uploaded 2 sample sizes. Only the skull can be scaled smaller…
reverse modeled adderini. needs to be open to public for improvements. here it is
Introducing the the Clawstrider from Horizon Forbidden West! This machine is to scale with the official board game and stands on a 40mm base. It is intended to be printed in one piece for stability. All credit for character design goes to…
a 2-part wall mount for stamndard screws. the whole part is less than 4mm thick - prints in 10 minutes and doesnt use 20 cents of filament mount one part to the wall using a standard screw (3,5x40mm is what i use mostly) mount the other…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) THE FORBIDDEN APPLE This…
🪔 Goddess Lakshmi – 3D Printable Statue This is a highly detailed 3D printable statue of Goddess Lakshmi (Mahalakshmi) , traditionally depicted seated on a lotus in a serene blessing posture. The model is designed for clean and stable 3D…
V2 is finally here! After reading many comments on my V1 shredder telling me what I could do better, I have now made a V2 which features Stronger center Better chute system Smoother appearance Allowance for the drill bit to be on both…
It is NOT my model. It is 100% NOT my model. All credit goes to the original maker Bielin on Thingiverse.
Introducing the ultimate hunt, the Slitherfang from Horizon Forbidden West! This machine is to scale with the official board game and stands on a 120mm base. It has been split into a few, more easily printed parts that come together…
Remix from: https://www.printables.com/model/333283-simple-brushless-rc-sport-hovercraft
Thank you Marko Borsic for the original design. It fits great, and prints well. I've noticed that the stiff 6mm PTFE tube coming from my Polydryer filament box tugs on the adapter, and pulls up the side that the tube goes into. I've added…
No matter what I tried, PrusaSlicer 2.4.2 insisted on unsupported bridges for the roof of the sharks mouth. I added a cylinder support enforcer to the unsupported section, and after printing, simply removed the supports.
The goddess statue from Tears of the Kingdom. (From the Temple of Time.) Prints without supports. If you have any questions, complaints, thoughts or requests, let me know! If you need help with anything I’ll help you as well as I can.…
Add the gentle giants from the Forbidden West! This machine is to scale with the official board game and stands on a 80mm base. I printed attached to the base for stability but a detached version is also available. Note that the tail dips…
There is a version without embedded magnet spots and one with. (!) If you want to embed magnets, make sure you look up how to add a pause during the slicing process. This varies by slicer. (!) The current design is for cylindrical…
Not just Christmas decoration! This bell is actually cryptex locker. You can set our own numerical code of course! What do you hide? Secret message for your loved ones? An golden ring?!! Or just keys to your backdoors? :) ...it's up to…
Modified riser that provides a much cleaner and pinch free route for the filament, especially if printing from a dryer/drybox. Two options. A simpler one with the tube mostly floating and one with an arm that provides support to the tube…
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as a single color or multi color print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma…
Go ahead and divide 39 mm by your desired size and use that number as the size modifier to get a buckle of your desired size. Make sure to print with the flat side down and the tab facing up.
A box for Philips 7000 series 16 in 1 shaver (MG7736/15), that fits all pieces that come with the shaver. Features: Lid of the box stays upright when open - does not flop down to either side. This can be modified by removing the stops on…
UPDATE: For your convenience I have now added pre-coloured .3mf files at a whopping 520% scale, you'll need to add supports yourself and you can down-scale in slicer if you wish. 😁 ( I have not included the Base ). This was done for the…
Nozzle drawer with room for 20 MK8 nozzles. Could easily carry more on the downwards-facing side. Let me know if you would like such a version. The drawer fits perfectly snug for my print, but that will depend on print settings and…
These ladders are to scale with Mattel's WWE Action figures and come in two sizes, corresponding to an 8ft (2,5m) and 12,8ft (3,9m) high ladder when stood up, respectively. Yes, this ladder actually folds! Both heights feature linkages,…
A flexible sculpture that is seemly useless until you fold it together. The joints are 3D printed and prints in under an hour. Try to get someone to guess what it is before folding it together. Let me know what you think. I need…
Ladder for tabletop games scenery. Comes pre-supported for resin. —————————————————————————— Hey everyone! I wanted to share some exciting news with you - my first Kickstarter campaign for Gracewindale: The Gatehouse 3D Printable Scenery…
UPDATED SIZING + PRINT IN PLACE • Fun desktop fidget toy to play with! • Easy assembly, if the print settings are dialed in everything should press fit. • Able to shred paper! • No supports required! print in place! • Rougly 2.5hr print…
Christmas tree with embedded addressable LEDs using color change feature of PrusaSlicer. 3D print is divided in 4 stages with in total 25 LEDs. Using a Trinket M0 Arduino compatible board and a Li-ion battery to drive the LEDs and…
This 3D-printed case, slightly inspired by the Amazon Echo Show, is designed to integrate a Raspberry Pi with a 7-inch display ( link ), offering a compact and clean solution for various projects. The Raspberry Pi is mounted on the back…
My wife wanted a chicken shredder for making sandwiches. Unfortunately the only model i could find online was a paid model, so i made my own. it is basically an oversized weed grinder. Cook your chicken breast, put it in and spin. I…
A Greek-inspired female marble statue. Tree supports recommended. Part of my Goddess collection. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This is a remix of the excellent work done by https://www.thingiverse.com/Bielin I redesigned and enlarged by 2 mm the lower housing that contains the mechanism (spring or rubber band) in order to be less restrictive in the choice of it.…
Here is one of the first machines we saw in the forbidden west, the Burrower! This machine is to scale with the official board game and stands on a 30mm base. It is intended to be printed in one piece (with the base) for stability. All…
Hidden Light allows you to fly your DJI MINI 4 PRO (DJI MINI 3 PRO) undetected in the dark
simple, basic lid raiser for Creality K2 plus now in Version 3 The following I copied from Original https://www.printables.com/model/1169180-lid-raiser-for-creality-k2-plus-2025-02-22-added-v Raises the glass lid by 40mm so that the…
Hand out goodies with STYLE during Spooky Season! Leave on display or as fun snack bucket the other seasons. This life sized skull and brain was remixed and designed for good printability and handling when on the go. Adding lighting to…
Used Poly.cam to scan Crystal Embedded Halloween Themed Skull. Thought it came out really well and wanted to share it. Etsy Page: https://demambaprints.etsy.com Tik Tok: https://www.tiktok.com/@demambaprints Polycam scans here:…
Modified this model to Include some clearance around the rear hinges, as I found that the case wouldn't open properly. Both the top and the bottom files have been modified, however, the original clip works fine. Happy printing : )
Version 2.0 Changelog A new rulebook, much more in depth, has now been released, including some rule changes and updates. A free companion app (credit to makermike99) is now available to help you keep track of everything during your…
Inspired by fluttering dragonfly birthday cards, these hearts are a fun way to add a little extra surprise to your valentine's day card. Word of caution, if your partner startles easily give them a little warning. I don't want to be the…
