Wyniki wyszukiwania: dehumidifier

Sortowanie

109 modeli

P
PrintablesERIK3DP

Mounting Cover for Rosahl M-1J1R Electric Dehumidifier Membrane based Filament Drybox

This is a mounting cover/frame for a Rosahl M-1J1R electric dehumidifer membrane which can be used for a filament drybox of around 20-30l for multiple spools. Along with a USB-C power supply module it's a convenient and low power…

Pobrania
101
Polubienia
17
Ocena
5
P
PrintablesLukas

Window dehumidifier

Story: We have recently moved into a new apartment. It is a nice flat, but pretty old. The bedroom and living room have two rows of windows each. During the winter months a lot of humidity accumulates between those windows. In order to…

Pobrania
33
Polubienia
9
Ocena
0
P
PrintablesRo3Deee

Bottle cap with with tube hole for dehumidifiers

The include project is for 41mm bottle cap diameters and 13mm tube diameter. The provided Freecad sourse file can be modified for other diameters. Print settings: ZERO top layers 0.3 layer height 3 perimeters

Pobrania
23
Polubienia
6
Ocena
0
P
PrintablesND

Delonghi Dehumidifier DDSX220WFA Water drain

Works in PETG but better in PA or TPU 95A

Pobrania
4
Polubienia
1
Ocena
0
P
PrintablesERIK3DP

Filament Drybox with Rosahl RS1 Electric Dehumidifier Membrane

This is a filament drybox for a single spool based on a cereal box. It does not require any desiccant but leverages a Rosahl electric dehumidifier membrane. The original cover plug of the cereal box is replaced by a 3D printed plug which…

Pobrania
262
Polubienia
76
Ocena
4,33
P
PrintablesWnrsm

Dehumidifier Garden Hose Adapter 3/4" FNPT FIP to 3/4" M GHT Garden Hose Thread

For some reason my drain hose connection on my dehumidifier is not threaded for a garden hose. It is a 3/4" male NPT. I tried loading it up with teflon tape and it worked until something bumped it. I couldn't find an adapter that wasn't…

Pobrania
261
Polubienia
15
Ocena
5
P
PrintablesHabony Norbert

Silica gel dehumidifier box

PLA-ból nyomtattam 0,2 szélességben, 2 falat.

Pobrania
253
Polubienia
27
Ocena
0
P
PrintablesERIK3DP

Outside Mounting Cover for Rosahl M-1J1R Electric Dehumidifier Membrane based Filament Drybox or Bambu Lab AMS

Please see my updated version of the Rosahl M-1J1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…

Pobrania
196
Polubienia
51
Ocena
0
P
PrintablesCNC Kitchen

Solid State Dehumidifier (MDL-3) for AMS

Housing to install a Solid State Dehumidifier into an AMS. I highly recommend either hard wiring the MDL-3 or using an XT-60 plug or similar instead of the barrel plug I showed in the video to reduce voltage drop.

Pobrania
182
Polubienia
103
Ocena
0
P
PrintablesMAKERTEAM®

Slingshot AMMO BOX with dehumidifier (Munitionsbox für Steinschleuder mit Entfeuchter)

Nice little ammo box with dovetail lid for your slingshot ammunition. If you use the additional INLAY with perforated bottom surface you can place a pack of silica (80x40x10mm max.) underneath for dehumidifying your slingshot balls if…

Pobrania
180
Polubienia
36
Ocena
0
P
PrintablesERIK3DP

New Mounting Cover for Rosahl MDL-3 Dehumidifier Membrane for Filament Dryboxes or Bambu Lab AMS

This is the new mounting cover/case for a Rosahl MDL-3 electric dehumidifer membrane as alternative to the original ( https://www.printables.com/model/932682-mounting-cover-for-rosahl-mdl-3-electric-dehumidif ) and uses an off-the-shelf…

Pobrania
171
Polubienia
31
Ocena
5
P
PrintablesHabony Norbert

Silica gel dehumidifier box

PLA-ból nyomtattam 0,2 szélességben, 2 falat.

Pobrania
170
Polubienia
19
Ocena
5
P
PrintablesERIK3DP

Outside Mounting Cover for Rosahl M-3M1R Electric Dehumidifier Membrane based Filament Drybox or Bambu Lab AMS

Please see my updated version of the Rosahl M-3M1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…

Pobrania
170
Polubienia
29
Ocena
5
P
PrintablesJEpiston

Filament dehumidifier

Silica gel holder, round 50 mm, that fits in the reel of the filament. to keep the watervapor out of your filament. The Silica Gel (2-4 mm size) is a color changing type, so you should know when to regenerate it. The STL files Silica…

Pobrania
169
Polubienia
43
Ocena
4,33
P
PrintablessmajlySVK

Dehumidifier - box

This box is designed as dehumidifier for car to prevent foggy windows during cold nights. Just fill it with rice or silica gel and put it on deck near the front window. I also attached lid without cutouts, so you can add logo on the top…

Pobrania
139
Polubienia
24
Ocena
0
P
Printablesbobby Newcomb

AMS Dehumidifier holder

After changing the desiccant in my AMS unit due to the humid environment, I decided it was time to explore a different solution. I purchased a 12" long gun safe dehumidifier ( Dehumidifier ), thinking there might be a way to incorporate…

Pobrania
126
Polubienia
62
Ocena
5
P
PrintablesCage

Silica gel, dehumidifier basket

I use it in the filament drier, printer enclosure, etc. The basket can be printed from PLA, PLA+, PETG, ASA, ABS, etc. I prefer to use PETG, because of the less odours than ASA/ABS and the better temperature resistance than PLA. No…

Pobrania
123
Polubienia
12
Ocena
0
P
PrintablesBeeTinker

Filament dehumidifier / dryer

Please, upload your printed parts here, i would like to see your prints. Hi, i just started printing with recycled PET, and you may know the rPet needs to be really dry, i made this upgrade to food dryer, to dry the filament during prints…

Pobrania
118
Polubienia
15
Ocena
5
P
PrintablesAdam Roach

Pump Hose Adapter for AeonAir/Whirlpool/Idylis Dehumidifiers

The original design of this plastic adapter that connects the dehumidifier to a drain hose is somewhat fragile and subject to wearing out over time. Newer versions of this part are more sturdy, but don't fit older models; and replacement…

Pobrania
109
Polubienia
5
Ocena
0
P
PrintablesERIK3DP

Mounting Cover for Rosahl M-3M1R Electric Dehumidifier Membrane based Filament Drybox

This is a mounting cover/frame for a Rosahl M-3M1R electric dehumidifer membrane which can be used for a filament drybox of around 50-70l for multiple spools. Along with a USB-C power supply module it's a convenient and low power…

Pobrania
95
Polubienia
24
Ocena
0
P
PrintablesERIK3DP

Outside Mounting Cover for Rosahl M-3J1R Electric Dehumidifier Membrane based Filament Drybox or Bambu Lab AMS

Please see my updated version of the Rosahl M-3J1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…

Pobrania
91
Polubienia
11
Ocena
5
P
PrintablesManuelM

DIY Dehumidifier for 3D Printer Filaments

Summary Introducing our DIY filament dryer box, the ultimate solution for 3D printing enthusiasts. This innovative design features precise temperature control, ensuring optimal filament drying conditions. With its automatic start and stop…

Pobrania
87
Polubienia
50
Ocena
0
P
PrintablesSteve

Mainline Cleanout Cap with Hose Connector for Dehumidifier

I took the original model of this mainline cap and scaled it to fit a 3.5" basement drain. I only needed about half as many threads as the original model so I removed some. I also added a hose connector on the top because I needed a way…

Pobrania
82
Polubienia
6
Ocena
0
P
PrintablesERIK3DP

New Mounting Cover for Rosahl M-3J1R Dehumidifier Membrane based Filament Drybox or Bambu Lab AMS

This is an updated version of the M-3J1R outside mounting cover . It simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and no…

Pobrania
81
Polubienia
13
Ocena
5
P
PrintablesHoff9000

Room air dehumidifier with fan

After having some mold issues in my flat, I created this little project. It consists of different compartments Bottom container with a separate water bucket and optional swimmer Chemical module with a sieve, holding e.g., Calciumcloride…

Pobrania
80
Polubienia
20
Ocena
5
P
PrintablesERIK3DP

New Mounting Cover for Rosahl M-3M1R Dehumidifier Membrane based Filament Drybox or Bambu Lab AMS

See our latest addition to Rosahl membrane mounting covers with a thread-mount cover for the M-3M1R membrane which simplifies mounting quite a lot to just drill one large hole.. This here is an updated version of the M-3M1R outside…

Pobrania
74
Polubienia
8
Ocena
0
P
Printableskbob

FilaBilly Dehumidifier

This is the FilaBilly Dehumidifier. It's a compact smart device that exracts water from the air. It's meant to be used in an airtight cabinet to create a low humidity environment for 3D printer filament. This is the first part of a larger…

Pobrania
72
Polubienia
24
Ocena
0
P
PrintablesSteve

DIY Safe Peltier Dehumidifier

This is more a demonstration. It will have to be modified to fit whatever components you might use as they are easily available. It's simply a box and simple ducting, hot air up, cold down. Purpose of the box is so there is no air leakage…

Pobrania
70
Polubienia
27
Ocena
0
P
PrintablesERIK3DP

New Mounting Cover for Rosahl M-2J1R Dehumidifier Membrane based Filament Drybox or Bambu Lab AMS

This is an updated version of the M-2J1R outside mounting cover . It simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and no…

Pobrania
69
Polubienia
13
Ocena
4
P
PrintablesLeftcetio

Filament dehumidifier / dryer - Cosori CO165-FD Food Dehydrator

See original for description. @ustejski made a very nice design that works well. However, I purchased the Cosori dehydrator because it was low cost and had good reviews, and had to modify the original model's shell and adapt to the center…

Pobrania
68
Polubienia
12
Ocena
5
P
PrintablesDP design

Amig dehumidifier drain adapter to 19mm hose

According to the documentation (manual can be found at amigclima.com), the Amig dehumidifier should have a 19mm drain hose connection for continuous operation. But in fact, the drain connection is a strange screw thread between 16 and…

Pobrania
56
Polubienia
12
Ocena
0
P
Printablesqwerty

Dehumidifier For Spools

Details: Silica gel is quite expensive with about 20-30 bucks per kilo. There are even versions that can change color that contain toxic chemicals like cobalt chloride and it's not as easily available as car and home dehumidifier. So I…

Pobrania
53
Polubienia
10
Ocena
0
P
PrintablesMarkus

Small electrical dehumidifier

Deutsche Version unten. ---------------------------- Total parts costs (depending on what you already have at home) will be somewhat between 10 and 25€, assuming you have the coolers. Currently they cost around 15€ on ebay. Practical…

Pobrania
49
Polubienia
14
Ocena
0
P
PrintablesSTELFpro

Turbine (fan) for meaco dd8l junior desiccant dehumidifier

Turbine for meaco dd8l junior desiccant dehumidifier PETG layer height: 0.12 mm line width: 0.42 mm Walls: 4

Pobrania
49
Polubienia
9
Ocena
0
P
PrintablesERIK3DP

Mounting Cover for Rosahl MDL-3 Electric Dehumidifier Membrane based Filament Drybox

Update I made a new mounting cover for the Rosahl MDL-3 membrane, which uses a standard gasket instead of the rubber o-ring and is simpler to assemble. Also the gasket frame fully covers the interior of the case, hence is more protective.…

Pobrania
49
Polubienia
15
Ocena
0
P
PrintablesTK_bit_twiddler

Dehumidifier stand

I keep one of those small plug-in-to-recharge dehumidifiers inside my filament storage box, and another inside the active filament chamber above my 3d printer. But my filament chamber (a clear plastic box above my printer) doesn't have…

Pobrania
48
Polubienia
5
Ocena
5
P
PrintablesFink

Eva Dry Dehumidifier Bracket

Bracket to hold my reusable Eva Dry dehumidifier in my filament storage. Print 2 and use M4 bolts to attach (I used M4 x 12) This is the model I made this for…

Pobrania
46
Polubienia
4
Ocena
0
P
PrintablesERIK3DP

New Mounting Cover for Rosahl M-1J1R Dehumidifier Membrane based Filament Drybox

This is an updated version of the M-1J1R outside mounting cover . It simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and no…

Pobrania
45
Polubienia
4
Ocena
0
P
Printablesfalken_gt4

Meaco DD8L Junior Dehumidifier Wall Mount Brackets

Wall Mount Brackets for the Meaco DD8L Junior Dehumidifier To fit do the following; Remove the 4 screws from the floor mount and remove it. Attach the bottom brackets to the bottom of the Dehumidifier using the original screws. Hold up to…

Pobrania
45
Polubienia
2
Ocena
0
P
PrintablesAndy D.

Air Dehumidifier - Luftentfeuchter

Designed for 3 perimeters print with 0.4 mm nozzle. I tested it with water and it didn't leak out, but you better check too. Tolerances might be tight. I have a V2 in mind with improved tolerances and curves to print a bit faster. If this…

Pobrania
43
Polubienia
1
Ocena
0
P
PrintablesERIK3DP

Mounting Cover for Rosahl M-3J1R Electric Dehumidifier Membrane based Filament Drybox

This is a mounting cover/frame for a Rosahl M-3J1R electric dehumidifer membrane which can be used for a filament drybox of around 50-70l for multiple spools. Along with a USB-C power supply module it's a convenient and low power…

Pobrania
42
Polubienia
10
Ocena
0
P
PrintablesATXMatt

EVA-DRY E333 Dehumidifier Stand

Based on the EVA-Dry E333 Stand by DaJMasta https://www.thingiverse.com/thing:3747734. This a perfect stand for the EVA-DRY E333 Dehumidifier, works perfect for your dry box or enclosure. I'm using it in my dry box with some double-sided…

Pobrania
35
Polubienia
11
Ocena
5
P
PrintablesEspen Ellingsen

Case for dehumidifier bags

I made this for using the Torrbollen bags in a case that fits my usecase and cabinet space. I designed it to fit Torrbollen 450g bags with water dripping down into the container, leaving the bag well exposed to the surrounding air on the…

Pobrania
35
Polubienia
6
Ocena
0

3D-Printed Filament Dehumidifier

This 3D-printed filament dehumidifier is a practical and cost-effective alternative to commercial boxes, which are often expensive and bulky, used to keep filament spools dry. With this DIY project, you can save both money and space. The…

Pobrania
34
Polubienia
6
Ocena
0
P
PrintablesERIK3DP

3D-Printable Gaskets for Rosahl M-Series Dehumidifier Membranes

Upon request by users I made 3D-printable spare gaskets for all Rosahl M-Series dehumidifier membranes. Those include M-1J1R, M-2J1R, M-3M1R, M-3J1R, M-5J1R, M-7J1R and M-10J1R membranes. The models have the same shape as the original…

Pobrania
32
Polubienia
3
Ocena
0
P
PrintablesMikhail C.

Fast-printing open dehumidifier bag container

This design is a container for a 250g bag of dehumidifier (Calcium Chloride or similar). I've made the model for quick printing, and it takes approximately 1 hour. Material Recommendations: tested with PLA and PTEG, both are fine.…

Pobrania
32
Polubienia
2
Ocena
0
P
Printablessprior

Dehumidifier float compatible with Frigidaire part 5303306080

Needed to fix a dehumidifier, part wasn't available. This model is solid so print it with support, very low infill, lots of top/bottom layers and perimeters. I suggest in ABS or PETG, not PLA which would be too brittle. My picture is of a…

Pobrania
29
Polubienia
1
Ocena
0
P
Printablesfr4nk

dehumidifier container

I bought this humidifier form amazon Twin Pack Cordless Rechargeable... https://www.amazon.co.uk/dp/B00TE45IHI?ref=ppx_p this is a container for silica beads so this drier will work with it Must print in high temp abs or better

Pobrania
29
Polubienia
1
Ocena
0
P
PrintablesERIK3DP

Outside Mounting Cover for Rosahl M-2J1R Electric Dehumidifier Membrane based Filament Drybox or AMS

Please see my updated version of the Rosahl M-2J1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…

Pobrania
28
Polubienia
10
Ocena
5
P
PrintablesMouky

Dehumidifier base / underlay

Base for dehumitifier so the silica gel pack is 1cm above the surface. Size 15cm x 8cm x 1cm Print it with no top and no bottom layers so you can use the infill as air-passage. Update: V2 is bigger and more stable (16cm x 10cm x 1cm)

Pobrania
27
Polubienia
3
Ocena
5
P
PrintablesIan Graves

dehumidifier hose clip for bucket

work needed a clip to hold a dehumidifier hose in a 5-gallon bucket. here is my design, tolerances need work as it doesn't lock on the bucket as well as I would like but well enough that I don't want to fix and reprint.

Pobrania
25
Polubienia
1
Ocena
0
P
PrintablesOcho Camino

Everdrip Dehumidifier

This is a replacement drip catcher for a dehumidifer so the collected water everdrains out of the dehumidifer rather than filling up the receptacle and shutting off. I use it on my boat with the dehumidifier placed in the sink. It works…

Pobrania
24
Polubienia
2
Ocena
0
P
PrintablesMatthias Tytgat

Dehumidifier fan wheel

A replacement part for the fan in Delonghi dehumidifiers. The original one shattered due to it's age. This is a replacement part that is modelled after the original. After printing you might need to balance it, even though the RPM's are…

Pobrania
22
Polubienia
9
Ocena
0
P
PrintablesDanko.tmp

Dehumidifier

This 3D printed model serves as a simple passive air dehumidifier. It is designed for use with standard absorption bags

Pobrania
22
Polubienia
3
Ocena
0
P
PrintablesERIK3DP

Thread-Mount Cover for Rosahl M-3M1R Dehumidifier Membrane

This is an new/alternative mounting cover for the Rosahl M-3M1R membrane and USB-C power supply onto a filament dry storagebox, BambuLab AMS or Creality CFS or other multi-material-system or generic storage boxes for various applications.…

Pobrania
22
Polubienia
3
Ocena
0

Customizable Car Dehumidifier Basket for Spill Proof Calcium Chloride Water Trap

Basket designed for the PetMate No Spill Bowl https://www.amazon.com/dp/B00M1UWJ5G but can be customized to fit any desired vessel. You can buy a 25-lb pail of Calcium Chloride from McMaster-Carr for about $43…

Pobrania
21
Polubienia
1
Ocena
0
P
PrintablesSiar

Mini Spool Dehumidifier Basket

A compact, basket-style dehumidifier designed to fit inside 3D printing spools. Weighs 17g and prints quickly. Includes two versions: standard fit and a looser alternative

Pobrania
21
Polubienia
5
Ocena
0
P
PrintablesGreg Thomas

Sunlu Dryer/Dehumidifier External Fan

I wanted a much simpler option for removing humidity from my Sunlu Dehumidifier than what was currently out there. I opted to use a USB 40x10 fan, with speed control. Something like…

Pobrania
21
Polubienia
3
Ocena
0
P
PrintablesMilan98

Vysoušeč vlhkosti do auta - Dehumidifier for the car

Stačí nasypat kočkolit a vlhkost se strácí - Just insert the cat litter and the moisture disappears

Pobrania
19
Polubienia
2
Ocena
0
P
PrintablesDusty

Magnetic Mount for Hornady Rechargeable Dehumidifier

Needed a way to mount the Hornady Rechargeable Dehumidifier 95900 to the inside of a gun cabinet. Print in PETG or something durable. Recommended layer height of .15mm to ensure that there are two layers in between the metal and the…

Pobrania
19
Polubienia
1
Ocena
0
P
PrintablesADubs1995

Button Cover for Midea Cube 20 Pint / 12L Dehumidifier

I got sick of my cat, Zeus, sitting on the dehumidifier and changing the settings. The Midea Cube (we have two) doesn't have a way to lockout the button controls. This cover goes over all of the control buttons, while still allowing…

Pobrania
18
Polubienia
3
Ocena
5
P
Printablesaeberbach

Dehumidifier reel holder

The inspiration was an aluminium vacuum cleaner tube I picked up from a bin one day… I wanted a reel holder and dehumidifier but I have a few reels of 2kg recycled filament, and most will not fit that large reel. Once I found the big…

Pobrania
18
Polubienia
3
Ocena
0
P
Printablespzett

Midea Cube 20 Dehumidifier Top Shelf

My Midea dehumidifier was occupying a corner of my living room that I wanted to use for a plant. Hence I made a top shelf that fits onto the upper lip without restricting the airflow and allows a top plate to be inserted for placing other…

Pobrania
17
Polubienia
3
Ocena
0
P
PrintablesWARXion

Dehumidifier Box

I recommend printing the "Bottom" part at 100% infill.

Pobrania
17
Polubienia
2
Ocena
5
P
PrintablesChris Riley

3/8" ID 19/32" OD hose clip condensation pump dehumidifier humidifier

A quick clip to help manage high pressure 3/8" ID vinyl hose. I got tired of my condensation pump hose kinking and being hard to manage so I made these clips. The are 5/8" in size. They fit this type of hose: https://amzn.to/3OpgRvJ…

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesDP design

Amig dehumidifier replacement cap

The drain connection is a strange screw thread between 16 and 17mm. After about 10 attempts, I found the correct thread and designed this replacement drain cap. There are two pieces: the cap itself can be printed in just about anything (I…

Pobrania
15
Polubienia
1
Ocena
0
P
PrintablesLeftcetio

Filament dehumidifier / dryer using Cosori CFD-N051 Food Dehydrator

This is a beta test of revised dimensions to fit this new model of dehydrator. My original OpenSCAD files were hard to follow, so I cleaned up the Customizer and added some descriptions. I do not have this model, so if you do and can…

Pobrania
15
Polubienia
3
Ocena
0
P
Printablesb8trez

Dehumidifier rod magnetic holder

Hey team, I purchased a dehumidifier rod from eBay (USA made item - Dampp Chaser® branded). The rod itself feels high quality and it functions well, however the standard plastic mounts felt pretty cheap and if placed on the floor of the…

Pobrania
15
Polubienia
2
Ocena
5

Dehumidifier chain hanger (print in place)

Can be printed with common settings, just use a little organic supports for the overhangs. The AIR MAX dehumidifier is sold by BISON, but once unboxed it doesn't say BISON anywhere on it. Example: https://www.bison.net/en/product.6313252…

Pobrania
15
Polubienia
1
Ocena
0
P
PrintablesJellyTitan

Dehumidifier rod magnetic holder using 12x3 puck magnets

My MK3S was getting an ‘under temp’ error in a cold garage in the winter. Adding a safe dehumidifier helped keep the temp above the error threshold of about 50°F. The dehumidifier is essentially a stick-shaped weak electric heater. These…

Pobrania
14
Polubienia
1
Ocena
0
P
PrintablesChris Riley

3/8" ID 19/32" OD vinyl hose clip to 1 1/4" iron pipe condensation pump dehumidifier humidifier

A quick clip to help manage condensation pump dehumidifier vinyl hose. It fit 3/8" ID vinyl hose, it's about 19/32 OD. They fit this type of hose: https://amzn.to/3OpgRvJ (Amazon aff) My furnace used 1 ¼" iron pipe for the gas feed as a…

Pobrania
13
Polubienia
2
Ocena
0
P
PrintablesCurragh

Dehumidifier container

Container for silica-gel (approximately 300g) It can be placed in a car can-holder. It can be fitted with a monitoring humidity (and temperature) indicator. [the indicator displays data for silica gel] 3 possible caps : Classic With caddy…

Pobrania
12
Polubienia
2
Ocena
0
P
PrintablesTVHS

EasyHome LE2014 Dehumidifier duct connector adapter

This adapter allowed the connection of a standard 150mm flex hose to the output of an Easy Home LE2014 dehumidifier unit so that you can direct the dry air anywhere you need to dry out damp spots, linen cupboards etc. I've made the…

Pobrania
12
Polubienia
2
Ocena
0
P
Printablesfr4nk

dehumidifier splitter

I bought this humidifier form amazon Twin Pack Cordless Rechargeable... https://www.amazon.co.uk/dp/B00TE45IHI?ref=ppx_p So i wanted to dry the 2 humidifiers at once so i designed this Print in a high temp filament only abs or better

Pobrania
12
Polubienia
0
Ocena
0
P
PrintablesFounders

Mini Dehumidifier Stand (Overflow Container)

This is a simple stand designed to collect any water that may leak out of a small dehumidifier. Print instructions Mini Dehumidifier Stand - Body Rafts: No Supports: No Layer Height: 0.2mm - .4mm Nozzle 0.3mm - .6mm Nozzle Infill: 15-20%…

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesJellyTitan

Dehumidifier rod magnetic holder using 20x5x2 stick magnets

My MK3S was getting an ‘under temp’ error in a cold garage in the winter. Adding a safe dehumidifier helped keep the temp above the error threshold of about 50°F. The dehumidifier is essentially a stick-shaped weak electric heater. These…

Pobrania
11
Polubienia
2
Ocena
0
P
Printablespfless

Dehumidifier Hose Clip

Are you tired of your dehumidifier hose flopping around and soaking your basement? Do you have a PVC drain pipe in your home? If you answered yes to both of these then this print may be just what you need to keep your socks dry. I used…

Pobrania
11
Polubienia
4
Ocena
0
P
PrintablesEd Brentnall

Gridfinity Peugeot Paris Salt and Pepper mill dehumidifier

This is probably a niche design, but I thought there may be others out there with a similar dilemma, so I thought I'd share my design for a salt and pepper mill dehumidifier. I own two of the original design Peugeot salt and pepper mills…

Pobrania
11
Polubienia
3
Ocena
0
P
Printablescogsbody

dehumidifier exhaust director

very quick dehumidifier exhaust director, that i made so the exhaust on my dehumidifier would go up rather than down

Pobrania
11
Polubienia
0
Ocena
0
P
Printablesa-oka

Portable dehumidifier fixture

-------------------- Aliexpressで購入したポータブル除湿機をイノマタ化学の乾物ストッカー6.0の蓋に固定するためのパーツです。 蓋に2箇所穴を開ける必要があります。 [BOM] M3 * 6mm ネジ M3 ナット M3 ワッシャー(任意) ポータブル除湿機 https://ja.aliexpress.com/item/1005005943599388.html -------------------- 【Translate by…

Pobrania
11
Polubienia
0
Ocena
0
P
PrintablesGroenkop

Float Dehumidifier

Not sure about the model etc. Hopefully it sort off looks the same as yours or you might be able to change it.

Pobrania
10
Polubienia
1
Ocena
0

Hookatrol Dehumidifier Mount (Remix of Fume Extractor)

Part of DIY Dry-Cure system using Pro-breeze dehumidifier, Kooltron wine cooler and inkbird humidity controller. https://www.rollitup.org/t/thermoelectric-wine-cooler-drying-and-curing-diy.1088980/

Pobrania
10
Polubienia
1
Ocena
0
P
Printablesclayj

Dehumidifier hose to coax jack adapter

This is a simple model with a specific purpose. I have a dehumidifier that came with a drain hose so that I never have to empty the water again. The place where I want to drain the water is on the unfinished side of the basement and the…

Pobrania
10
Polubienia
2
Ocena
0
P
Printablesadi9090

Trotec Dehumidifier TTK 70 Hepa V2 filter adapter

I've bought Trotec dehumidifier and I needed to change a filter. The thing is like 30 euros so I made this filter adapter that is using VW Golf 7 cabin air filter that is around 10 euros :)

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesEsketit 02

Filament dryer / Food dryer for dehumidifier

I needed a new way to dry my filaments because using the oven was way too much for just one spool, so I created this adapter which mount on the top of a small dehumidifier that I had already at home. I also included a hole to insert a…

Pobrania
8
Polubienia
1
Ocena
0
P
PrintablesAkDuDu

HumiStop Basket for moisture absorbing material. Dehumidifier

Basket for dehumidifier "HumiStop". Used instead original pockets. You can put granular material absorbin moisture. Printed with PETG. Used 2-3 walls. Infill 20%. EDIT: Added 2nd version which is a bit taller.

Pobrania
8
Polubienia
0
Ocena
0
P
PrintablesLowres

Delonghi Dehumidifier Handle

Delonghi Dehumidifier Handle, after the crappy one that comes with the dehumidifier broke. Printed at 40% fill, solid. Category: Replacement Parts

Pobrania
8
Polubienia
0
Ocena
0

Spool Roller with Silica Gel Dehumidifier Built In with Funnel

Print list: Main Body x1 Gel Release Lid x1 Gel Top x1 Spool Roller Support Pin x2 Spool Roller x2 Rear Locking Bar x1 Gel Funnel x1 (if wanted) Settings will vary by printer, but with my AD5M I did 20% gyroid infill with .2mm layers.…

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesDaneDane

Button Cover for Midea Cube Dehumidifier

Button cover that keeps pets from constantly pressing buttons and changing settings. I printed in clear 72D TPU. You can use any filament you like. I used hot glue to attach, but you can use whatever adhesive you have.

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesJeremy Whaling

Decorative Sink Spout for Dehumidifier Drain Line

This is a small sink spout for a 1/2 in or 12.7 mm outside diameter hose (hole is tapered from 16 mm to 12 mm). I use it with a tabletop dehumidifier to keep the bathroom dry. Attach to sink with some interior construction adhesive or…

Pobrania
6
Polubienia
0
Ocena
0

Keystone dehumidifier plug

I have a Keystone dehumidifier with an overflow outlet that one can hook a hose up to. There is a plug that normally closes off the hole; one of our pets got ahold of the plug and chewed it up to oblivion. This plug can be printed in a…

Pobrania
6
Polubienia
0
Ocena
0
P
Printablesbonce

Celebrations Tub Spool Holder (and dehumidifier)

I am waiting for someone to upload their model so I can correctly reference this as a Remix So I had a couple of Celebration's christmas chocolate tubs, one of the older, taller ones (that can hold a spool) and one of the shorter newer…

Pobrania
5
Polubienia
2
Ocena
0
P
PrintablesLorcalder

Dehumidifier Box Catafalk One

This dehumidifier box is designed for use between furniture and walls with limited space. It is compatible with commercially available 900g moisture absorber refills (I buy them at the Action store). To print the bottom component, set:…

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesChuyMarlboro

ACTIVE ROOM DEHUMIDIFIER

Before anything I would like to mention that I uploaded also the STEP files so any of you can make modifications of my desing based on the parts you have on hand or the ones you would like to use. The list of things I used for this…

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesWilliam Mac

Mounting Cover for Rosahl M-2J1R Dehumidifier Membrane based Filament Drybox or Bambu Lab AMS

Uses the plug circled in red to connect to the m-2j1r. The power supply can output 3v 3amps which is the requirement to operate from rosahl. You can find it here: https://www.amazon.com/dp/B07N18XN84?ref=ppx_yo2ov_dt_b_fed_asin_title…

Pobrania
4
Polubienia
0
Ocena
0
P
PrintablesIFLYAGAIN

Novita ND60 Dehumidifier to Hose adapter

Adapter for Novita ND60 dehumidifier to hose Connect the dehumidifier directly to a water outlet Printed with 95A TPU. TPU attachment replaces original silicon/rubber dehumidifier outlet cover.

Pobrania
4
Polubienia
5
Ocena
0
P
PrintablesJFP

Klarstein dehumidifier handle

Model should be printed on the side just to overcome the layer adhesion issue. I have printed mine from PA6GF with 4 walls and 40% infill and it does bend less then the original one. To change the handle you need to partially disassemble…

Pobrania
4
Polubienia
0
Ocena
0
P
PrintablesLeon

Cover for Rosahl M-1J1R Electric Dehumidifier Membrane

Use in conjunction with Use "Abdeckung_Innen_Modifizierer" as a modifier as shown in the picture

Pobrania
3
Polubienia
2
Ocena
0
P
PrintablesB3dprint

Core one extender for dry box and solid state dehumidifier

This is an extender for the Coer One Drybox with a solid-state dehumidifier addition. This allows the original spool holder to be used and, therefore, allows larger spools. Additionally, the RS2 solid-state dehumidifier (…

Pobrania
2
Polubienia
0
Ocena
0
P
PrintablesMr. Smiff

bucket sensor replacment for dehumidifier

Replaces easily breaking bucket sensor with a beefy one. PETG recommended. See pictures for compatible model.

Pobrania
1
Polubienia
0
Ocena
0