1990 modeli
A Dewalt tool holder that should work with most Dewalt tools that use an XR battery. This holder replaces the battery in the tool so that it can be mounted to a wall for easy and convenient storage. I currently use this to mount my 4"…
Wydruk około 4,32 €–5,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
DeWalt Power Tool Battery Holder This holder is designed to hold DeWalt 20v Batteries. Designed based on a 3D scan of the DeWalt Battery and refined for a snug fit. Print instructions HARDWARE • Screws: x2 wood self tapping countersunk…
Wydruk około 1,78 €–2,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a zero clearance insert for Dewalt miter saws. I modeled it from the insert on my own saw wich is a DW716 (12inch, dual bevel, NON sliding) from what I can tell from the replacement inserts on amazon, this will fit models:…
Wydruk około 3,71 €–4,54 € nettoWstępna wycena jednego wariantu
A simple battery cradle with a color change to pop out the brand name. Can be standing on your bench or mounted on the wall. The infill is strategically modified to withstand use and mounting. Open hex pattern allows you to press and see…
Wydruk około 5,71 €–6,98 € nettoWstępna wycena jednego wariantu
Lets hang your DeWALT / Makita drill gun under your shelf! Designed for DeWALT DCD791, but it works also with Makita 6270D and probably with other similar models from different brands. Be sure to check also my other DeWalt hanger holders:…
Wydruk około 19,63 €–23,99 € nettoWstępna wycena jednego wariantu
Original model by RiversCo on thingiverse
Wydruk około 1,21 €–1,48 € nettoWstępna wycena jednego wariantu
This model is inspired by the design by USSA Design (watch their video here: https://www.youtube.com/watch?v=2JYTYOJt_m4). I made my own so it worked with my Dewalt DCW604 router. You will need to print 4x support screw 4x support screw…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
Dewalt Tool Mount If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work buy me a coffee (PayPal). Thanks!
Wydruk około 4,57 €–5,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My Dewalt Stick Vacuum is quickly becoming my favorite tool. SUPER cheap compared to a Dyson. I already have several Dewalt 20v batteries, and it's right at home in the garage for a quick tidy. Only problem was: there was no wall mount…
Wydruk około 5,72 €–7,00 € nettoWstępna wycena jednego wariantu
This is an adjustment jig for the DeWalt DWE 7492 and the DWE 7485 table saw. The set consists of multiple pieces for the adjustment of the fence and the blade relative to the miter slots of the table. Please pick the right extension…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Fix all the part like the plan in PDF with M4 x 25mm wood screws, I put mine on 388mm x 290mm x 20mm wood bord.
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
I based the design on a model by georgeprout on thingiverse - I added space for two more bits Original stl and SCAD file here: https://www.thingiverse.com/thing:4395136 This is a bit holder for 6 standard quarter-inch bits for a DeWalt…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
My DeWalt drill is so much better than the cheap one I had before, with one exception, there's no built in place to store the Phillips hex bit! 3D printing to the rescue! I'm not sure if this is a standard interface shared with other…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here's a model to help mount the Dewalt DCBL722 Leaf Blower, wrapping around the handle for a secure mount. I've also included Fusion 360 and Step source files if you want to customize (includes a model of the handle itself). Bill of…
Wydruk około 2,61 €–3,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Set of designs to make a ‘table top’ or connector for on top of a DeWalt Tstak toolbox. I used one to create a connector to hold my Ryobi Vacuum on top using https://www.printables.com/model/1044158-ryobi-link-wall-mount-single-cleat as…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
This part is used to adjust and secure scale indicator of Dewalt DWE7492 table saw and avoid plastic distortion of original indicator when securing screws Remix from https://www.thingiverse.com/thing:4602164 Part has been redesigned to…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
This model is a SKADIS holder for Dewalt 20v Batteries. It uses the SKADIS T-Clip system designed by @LineArcLine . It is designed to be easy on and off, bypassing the latch.
Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu
An 90 degree adapter to connect a Dewalt DWE7485 Table Saw (65mmOD) to 2 1/2" (ID) Clear PVC Dust Collection Hose, created in Fusion 360. Please note that the print time could be reduced by manually optimizing the print supports (in…
Wydruk około 10,92 €–13,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can either print as 2 separate parts with 1 very small support on the part that goes over the track, or print as 1 part. The 1 part will take more support and more time, is also not printed in the strongest orientation. For 2 parts…
Wydruk około 2,18 €–2,67 € nettoWstępna wycena jednego wariantu
This remixed dust shoe is designed to work with the Inventables Spindle Carriage, P/N 80033 for the Dewalt 611. The upper dust shoe and support arms now contain slots for nuts (both square and hex). This should allow for…
Wydruk około 3,64 €–4,45 € nettoWstępna wycena jednego wariantu
Simple non-marring tip to keep the metal from indenting on the wood. Once printed need to give it a couple of whacks to push the plastic piece on to the metal tip. Print settings I used: 0.2 mm, Prusament PETG, 0.4 nozzle, 15% infill, 3…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was needing to connect a vacuum hose to my table saw to extract wood chips and dust I designed the part in Fusion 360 with a cone to enter the table saw exits and an internal screw thread for the vacuum hose. After several tests I found…
Wydruk około 4,16 €–5,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This hanger will hold the Dewalt DCN692N 1st fix framing nail gun printed in PLA can be done with PETG, Nylon, Carbon fibre ect.. depends on your preference with 50% infill and the perimeters at 4
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
This adapter is curved so you can use inside a wood table and use a vacuum with 40mm hose. Curved prints are hard to print without support so I added also gcode with tree support as I have printed it. You can move printed part also when…
Wydruk około 3,78 €–4,61 € nettoWstępna wycena jednego wariantu
Dewalt 7485 Table Saw Vacuum Adaptor for Ryobi Shop Vac
Wydruk około 4,26 €–5,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
General Info This shoulder strap is designed to accomodate a DeWalt cordless wheed whacker, but would likely work with any standard size weed wheed whacker or edge trimmer. The two halves of the clamp attach with M5 hardware (be careful…
Wydruk około 2,29 €–2,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remixed from "Dewalt and Craftsman Case Dividers" by benjamenjohnson (thing:3480845) adjusted the heigh to fit this larger Tough Case+. Print Settings Printer: Ender 3 V2 Rafts: Doesn't Matter Supports: No Resolution: 0.20mm Infill: 15%…
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
An adapter to connect a Dewalt DWE7485 Table Saw (65mmOD) to 2 1/2" (ID) Clear PVC Dust Collection Hose, created in Fusion 360. Both ends have a slight taper.
Wydruk około 3,96 €–4,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Connects the vacuum port on a 10" Ryobi sliding mitre saw to the suction hose of a Dewalt shopvac hose for easy clean-up. Includes a 30° bend to keep the hose out of the way when using the saw. Print instructions Print standing up with at…
Wydruk około 2,41 €–2,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement handle for router base from Porter Cable, Black and Decker, and DeWALT. Replaces part 908572 Print in the original orientation. No supports are needed. PETG or other high temp filament recommended with at least 3 perimeters…
Wydruk około 4,09 €–5,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update If you use the osVAC system, have a look at the similar osVAC compatible vacuum adapter I made that you can use to connect your DeWalt table saw to the osVAC system here:…
Wydruk około 2,24 €–2,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Will likely work with more DeWalt miter saws than the DWS779 I have, but YMMV. PETG or harder recommended. No supports needed if you print thread side up, but I used a brim for stability. This thread works with many (most?) household…
Wydruk około 3,23 €–3,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An adapter to connect a Dewalt DXV10SA Shopvac to a 2 1/2" (ID) Clear PVC Dust Collection Hose, created in Fusion 360.
Wydruk około 5,04 €–6,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's a bit holder insert for your dewalt's box.
Wydruk około 2,36 €–2,89 € nettoWstępna wycena jednego wariantu
You break the handle off the side lugging the thing around? I did.
Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu
osVAC Y-Adapter for the DeWalt DWE 7485 table saw, for the lower vacuum port. osVAC Y-Adapter für DeWalt DWE 7485 Tischkreissäge, für das untere Absaugrohr.
Wydruk około 8,85 €–10,82 € nettoWstępna wycena jednego wariantu
Connector between the exhaust of the Dewalt 735 Planer to the Black&Decker leaf collection system . Wood chips are neatly collected in a trash can.
Wydruk około 4,81 €–5,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Der Adapter von 42 mm (Schlauchseite) auf 1 ¼ Zoll (Zusatzteile z.B. Fugendüse) diese ist bei Dewalt-Deutschland nicht verfügbar.
Wydruk około 2,59 €–3,17 € nettoWstępna wycena jednego wariantu
Convert DeWalt orbital sander to disk sander. DeWalt Models D26450, D26451, and D26453. Secure to work table with screws through base. Used a nylon strap from a reusable bag or pipe hanger strap to secure the sander with screw holes…
Wydruk około 8,37 €–10,23 € nettoWstępna wycena jednego wariantu
I also needed to somehow solve the holder for the grinder. So, with permission, I adapted the original author's design @kerngebiet. I'm not very good at modeling and I had a hard time modifying the model in Tinkercard. But for my purpose…
Wydruk około 3,32 €–4,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bit holders for Countersink drill bit set in a Dewalt ToughCase (DWASTCASEBLK). This was made specifically for the countersink drill bits that I have. Mileage may vary with other sets. There are a few slots for 1/2" drive drillbits along…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
DeWALT prenosný držiak na batérie a nabíjačku, držiak pre 4 kusy batérií. Má dobrú stabilitu vďaka širokému podstavcu a nízkemu ťažisku. Dúfam, že niekomu pomôže.
Wydruk około 2,23 €–2,73 € nettoWstępna wycena jednego wariantu
Print Setting PETG 0.3mm draft
Wydruk około 1,47 €–1,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Made this to get some clearance from the cell ends and nickel tabs on cordless tool battery packs. Adds some expansion/contraction give also. Made it so it will take 8-10mm wide copper or nickel strip and no longer than 27mm's long. Will…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pry tools for removing cell assembly from 20v Dewalt housings. Works good for the double stack 3,4, and 5 ah batteries. Lot safer than using a metal screwdriver! No sparks!! Pry up with tool 1 on the back side then use tool 2 to pull up…
Wydruk około 0,66 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adapter for Dewalt DXV30SAPTA hose to Cocraft HBD500 bench sander Parameters: Printsettings: 0,2mm Infill: N/A Wall parameters: 2 Prefered material: PETG No support is needed
Wydruk około 2,27 €–2,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
28/8/23 Added step file for battery holder to aid with remixes 2 versions, a single battery and a triple battery version. Prints vertically, no supports Important note on scaling As the fit of the battery is so precise I would advise…
Universal holder for any cordless drills and tools. I used it mainly for Makita, but other power tools should fit as well of course. The following Makita tools have been tested so far in the 40mm version: Makita DTD171 Makita DDF484…
These are tool mounts for DeWalt cordless tools. They can be screwed into the underside of a shelf and fit to the battery female end of the tool. Print standing up. I use 3 walls, 20% infill, and no supports.
Adapter folded from two parts to limit the use of supports DeWalt battery adapter You will need: 5x M3 - 15mm screws 2x male connectors and wires
Universal Cordless Impact Driver/Drill Holder A universal cordless Impact Driver/Drill Holder meant to organize your workbench as well as make it more ergonomic and easier to use. Front extrusion allows for it do double as a bottle…
This DeWalt 20V battery holder mounts to the wall and positions the batteries horizontally at a slightly upward angle. This allows for the batteries to be stored closer together than the traditional vertical holders. Other battery…
A holder for DeWalt devices attached to the battery with an additional lever to prevent spontaneous falling out
Simplified version of the Dewalt Battery Holder by maglub. No need for the battery to lock when hanging the battery on the wall. Print Settings Printer: C3Dt/xcy Rafts: No Supports: No Resolution: 0.3 Infill: 20% Filament: GreenGate PETG…
I wanted a zero clearance insert for my DeWalt DWE7485 jobsite saw and printed another I found online but it didn't fit my saw very well so I set out and whipped this one up. The insert fit well enough and was fairly straight forward to…
I used .4 Nozzle with Bambu Lab PLA (Yellow). 15% Infill and support. For best result print the part with the flat back face oriented down. If you like this design and would like to support my work, please share and consider donating to…
This 1/4" Hex bit holder is attached to the opposite side of the drill or impact driver than the belt clip. This device fits a Dewalt DCF887 impact driver and DCD996 hammer drill. I'm sure it would fit most Dewalt 20v MAX drills/impact…
More updated designs on malerworld since i’ve moved to bambu printers : https://makerworld.com/models/661522?appSharePlatform=copy These nested cups are designed to fit in both the small and large bins from the Dewalt TSTAK Shallow…
Alternative sawdust extraction adapter for the DeWalt DCW600, DCW604, D26200, DWP611 milling machine. This adapter has the huge advantage that it does not have to be screwed onto the milling machine, but just clicks. In addition, it has a…
I've been using the DeWalt DCBL722 20V leaf blower now for better part of a year. I was always disappointed it only ever came with the one nozzle on the end of the blower called a “concentrator” but it's really more of a diffuser. I was…
DeWalt AirLock compatible twist-lock dust collector fitting I like DeWalt tools well enough and own a bunch, but like every other tool vendor their approach to dust collector connections is psychotic. I'm not at all convinced that any two…
Carry 6 DEWALT 20v batteries to and from the job site with this sturdy carrier. Printed in Creality PETG with 10% infill and 3 walls. Just a few supports suggested for the handle.
After coming across afri.mandjelikian great design for the Dewalt/Stanley/Craftsman TSTAK FATMAX Versastack Organizer Nested Cups , I needed one for storing various sized M3 Button Head Socket Bolts in. I decided it would be more…
How to use the jig: 1) set the slider to the desired thickness 2) set it slightly before the blade 3) move the parallel guide until the wood touches the bearing, then fix it in position 4) perform the cut 5) repeat step 3) and 4)…
A set of saw blade holders for all common electrical jigsaws. The lids clip on and will stay on even if you turn the holder upside down and shake hard. Your saws won't fall out even if you toss your toolbox around. Chamfers make inserting…
Designed based on the handle of a Dewalt DCF787. I cannot confirm whether this will fit other Dewalt tools. Features Positive retention on the bits so they do not fall out Produces a satisfying snap when bits are inserted into the holder…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here's a minimalist wall mount…
This is a remix of "1/4" hex bit holder for a DeWalt drill" by Lowell Alleman. I wanted to be able to hold more than one hex bit on the side of my impact driver at a time, so I made a double barrel bit holder. I used the same M3x10 screw…
I know there are a number of holders available for the DeWalt batteries but I decided to design/print my own after seeing complaints of “too tight” along with not seeing options for both the 12V and 20V battery sizes, not to mention the…
I used 25% infill with the print standing up. PETG recommended. 4 hour print time. No brim needed.
I found a well designed jig on the internet but because I already spent too much money on jigs and tools I built one myself. For your convenience I've included all Fusion 360 files so you can make changes to the design. To make…
This is a basic wall mount for a DeWalt jigsaw (DCS331). Its designed to be quite snug so that the tool doesn't slid out if you want to mount it under a shelf. I printed it with 6 perimeters and %40 infill as I wasn't sure how strong it…
Bitholder for DeWalt cordless drills and impact drivers. At least fits DCD796. Screw to secure is standard dewalt screw (M3 10mm). Printed in PETG, 40% grid infill with auto support.
Pretty self explanatory. I was getting tired of carrying around a small box full of drill & driver bits, so I decided to make an accessory that clips easily onto my DeWalt DCD999 drill/driver. Presumably it will clip onto some of DeWalt's…
I made this mating connector for a Dewalt 20V battery pack so I could use it in a battery-powered project. For printability I split it into two halves and glued them together. I used ¼" spade terminals as the contacts, which can be glued…
This DeWalt battery mount uses a single screw to mount to any of your desired surfaces! It prints without support material, and is symmetrical so you can install it in either direction. If you want to support me or get a commercial…
Inspired by https://www.printables.com/model/519833-rugged-makita-battery-holder/remixes
This is a remix of two designs to get the best of both for my DeWalt Table saw with metric nuts and bolts. Following Designs are used: Sliding Block: www.thingiverse.com/thing:3973092 The block was dapted to fit for the DeWalt 7491 & 7492…
DeWalt 18V XR Battery (Transport) Cover/ Holder (With a hole for a hanging loop). Print settings: 🖨⚙ Material: PLA Layer height: 0.2 Infill: 25% Support: NO Print speed: 30mm/s ⚠ (Notes: The cover is printed in portrait. Also works with…
Just squeeze router on router base. Print with less support possible!
PLA is fine for indoor storage.
I redesigned this throat plate eliminating the screw holes and lock (lock is not necessary to have). I have fine tuned the bottom feet to be the exact height to level the plate with the table saw top (you can slightly sand these feet if a…
Dewalt battery holder or adapter. You could use this just as a mountable holder or if you insert a .7 inch strip of .032 brass you can connect to the battery. A small compartment is made for a fuse, reverse voltage protection or what you…
Simple attachment for the Dewalt 735 to get a 4"/100mm hose up and out of the way of boards exiting the rear of the planer! Simply push in the button on the stock port, rotate and remove the original stock black port. Install this…
Adapter to connect FESTOOL™ CLEANTEC™ D27 Dust Extractor to DeWalt™ Air-Lock™ tools This adapter is designed to allow a FESTOOL dust collector with a D27 hose fitting to connect easily to DeWalt tools featuring the "AirLock" style dust…
The lift fits on a DeWalt laser DCE089D1G. The laser beam can reach a height of 32 cm from the ground. The lift itself c
Adapter allowing DeWalt's DCW210B sander (or any other tool compatible with the DWV9000 adapter) to a Festool 27mm dust extractor hose, with or without the twist-lock mechanisms each connector allows. Updates: 2025-09-21 Increase…
DeWalt battery holder that mounts to a 1/4" pegboard and takes two standard size 20V (AKA 18V in some parts of the world, but using misleading marketing is the norm in North America) DeWalt batteries. I wanted a sideways mount so that I…
Many wall mounted brackets and holders already exist for DeWalt's iconic 20 volt batteries but after having looked at many designs I found them all lacking in various ways so I decided to make my own. Its main virtue is that it uses under…
So i wanted to make various ways to mount Dewalt Battery Chargers (DCB112/DCB115 and the DCB118) The DCB112 and DCB115 screws are 114.3mm apart, and the DCB118 is 133.4mm First option, is a simple 2mm thick alignment jig. you can print…
Cordless tool battery adapter. Dewalt Battery to Makita skin tools Extra hardware spade connectors wire 9mm female terminal fuse terminal M3 x10mm bolt & Hex nut Prep spade connectors like this, flatten out the shoulders if you can…
I ended up slightly modifying the slots on the featherboard, as well as designing new knobs and slides, all of which fit common-to-the-US 1/4-20 UNC hardware. Use lock nuts in the knobs and standard 2-inch-long hex bolts in the slides.…
A simple wedge to help mitigate the slight tipping effect on DeWalt Tough System 2.0 toolboxes when you stack them together. If anyone knows who makes a yellow that best matched the DeWalt yellow please let me know ☺
EXPAND YOUR CORDLESS WORKSHOP TOOLKIT! Check out our other tools: - 100W USB-C Power Bank Adapter — Fast-charge laptops, phones, & gear on the go. - Portable Soldering Station — Cordless soldering station for field repairs & benchtop…
I remixed Ashf144's file on Thingiverse to nearly eliminate the need for supports and improve the overall look (in my opinion). I also added a bevel where the battery clip goes to help it slide into place better and more easily. The only…
A 90° degree transition from the Dewalt DW735 dust collection port to 4". Here I'm using a Rockler quick connect but it'll also work fine with a 4" flex hose and it may work with various other fittings but I haven't verified this. The…
Dewalt Tool and Battery Holders
I printed upright without supports using PLA+ 3 walls, 3 top and bottom layers with 20% infill.
An adapter between a DeWalt orbital sander and a shop-vac hose. Specifically designed to work with a DWE6421. There are two versions. One for a Shop-Vac hose that is ~1 1/8" OD, and one for a DeWalt hose that is ~1 7/8" diameter. F3D…
