Wyniki wyszukiwania: dex

Sortowanie

1176 modeli

P
PrintablesLayerCake

IKEA Skadis Valve Index Holder with Charging Function

Inspired by the Valve Index Boomerang Charger and my lack of desk space. Thank you to Valve for sharing their Index CAD files. Make sure you have good layer adhesion and test the print, don't blame me for a dropped headset. The holder…

Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu

Pobrania
397
Polubienia
98
Ocena
5
P

VALVE Index Knuckles and HTC VIVE Tracker 3.0 Charging Stands

These here are some simplistic Charging Bays for my Index Controllers and also my new VIVE 3.0 Trackers. I didn't like how all my VR Gear was just laying in my Drawer so i decided to get it all a bit more Cleaned up ^^ I Recommend using…

Wydruk około 2,77 €–3,38 € nettoWstępna wycena jednego wariantu

Pobrania
246
Polubienia
25
Ocena
5
P
Printables4nthonylin

Valve Index Basestation Power Cord Wrap

This print is used to help organize the super long cables for the Valve Index Basestations (SteamVR2). To use, detach the cable from the brick, slide the brick into the model, reattach the cable and wrap around the brick, finally plug in…

Wydruk około 2,33 €–2,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
189
Polubienia
56
Ocena
5
P
PrintablesAlex_P

Indexing / dividing plate (Teilscheibe) for lathe Paulimot PM190-V or Optimum D180x300

The main part is the dividing plate fitting to the main spindle nut with: 0°, 90°, 180°, 270° indexes 1°, 5°, 15° marks and holes for fixing in 7,5° intervals Best it is printed with a color change after the first 0.5mm for good contrast…

Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu

Pobrania
114
Polubienia
15
Ocena
0
P
Printablesbrio

Hardinge Dividing/Indexing Head Plates

Background I picked up a Hardinge dividing head and it only came with one dividing head plate. To get other divisions I modeled four of them based on the factory indexing hole count specifications and measurements from my single dividing…

Wydruk około 4,02 €–4,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
78
Polubienia
9
Ocena
0
P
PrintablesYao Wei

Valve Index front cable guide

WARNING: Tilting could still cause strain close to the connector in front of the facial interface.

Wydruk około 0,36 €–0,43 € nettoWstępna wycena jednego wariantu

Pobrania
75
Polubienia
6
Ocena
4
P
Printablesbissalex

Silicon Cube Miller index

It's an unraveled silicon cube showing the Miller indices (grid structure and directions) of pure silicon like in silicon wafers. Can be used to help understand how a wafer is etched depending on said wafers orientation. This type of grid…

Wydruk około 1,29 €–1,58 € nettoWstępna wycena jednego wariantu

Pobrania
51
Polubienia
11
Ocena
5
P
PrintablesDany Sánchez

The Harmony Codex - Steven Wilson Album Coaster

𓊍 THE HARMONY CODEX I came here searching for something But I don't remember what that thing is anymore Did I dream you? Or are you dreaming me now? I love Steven Wilson's music, and so I created a set of 3D printable abstractions to…

Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu

Pobrania
19
Polubienia
4
Ocena
5
P
Printablesowar

Base for ADEX

This is base for ADEX ADS108GRP-1PO switch. The switch fits right in the base and you can print a patch panel for it if you want to. Than you can connect it with my base eith self taping screws. Enjoy!

Wydruk około 3,35 €–4,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
16
Polubienia
6
Ocena
0
P
PrintablesDon Patrick

Rotrics DexArm Enclosure exhaust pipe coupling

The Rotrics DexArm / Hexbot robot arm combines with an optional safety enclosure box for laser engraving, with a built-in fan. However, there is no obvious way to attach a pipe or tube to guide the fumes outside. I designed a coupling…

Wydruk około 2,62 €–3,20 € nettoWstępna wycena jednego wariantu

Pobrania
14
Polubienia
0
Ocena
0

Desk Organizer - Sliding System for Ambidextrous

🇮🇹 L'Organizer che si adatta a te, non il contrario! ✍ Ho progettato questo organizer modulare partendo da un problema comune: la maggior parte degli accessori da scrivania è pensata per destrimani. Ho voluto creare qualcosa di veramente…

Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu

Pobrania
6
Polubienia
1
Ocena
0
P
PrintablesVoxel3D_NL

X, Y and Z calibration tool for IDEX / dual extruder / dual color 3D printers

Remix of the amazing design of Lmaker . Added a part to be able to compare/finetune the Z-axis (offset) as well. This is a 10-15min print to make life easier when calibrating the X, Y, and Z-axis of (independent) dual extruder 3D…

Pobrania
2787
Polubienia
215
Ocena
4,94
P
PrintablesGriddex

Gridfinity Master Collection By Griddex

I have generated this collection and it contains several variations of the Gridfinity baseplates and bins. This will continue to be added to so please follow to keep up to date. Thanks Griddex

Pobrania
2750
Polubienia
286
Ocena
4,67
P
PrintablesLMaker

Offset XY dual extruder - Idex calibration

This is a file to make it easier to interpret the X-axis and Y-axis calibrations Este archivo es para hacer más sencilla la interpretación de los desfases del eje X y el eje Y Print this file with the first extruder ----…

Pobrania
2440
Polubienia
166
Ocena
4,9
P
PrintablesAnachronist

Nuts&bolt baby dexterity toy

(Updated 30 May 2023 with more thread clearance and separated STL files for Cura users.) Ever since I became a father, I wanted to make this nut and bolt toy for my child that encourages hand-eye coordination. I didn't have a 3D printer…

Pobrania
2134
Polubienia
331
Ocena
4,97
P
PrintablesHit Kit
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
1636
Polubienia
514
Ocena
4
P
Printablestetralite

SD Card Holder Rolodex-style

Store 24 SD cards in a rotary holder in the style of the Rolodex, making finding the SD card you're looking for a delight instead of a hassle. This holder allows you to see the labels on each SD card without having to remove them from a…

Pobrania
1613
Polubienia
385
Ocena
4,94
P
PrintablesNerlin

70mm, 72mm, 75mm, 82mm, and Windex 23oz Bottle Holders for the Multiboard Storage System

For the Multiboard Storage System. Standard Multiboard printer settings work, no supports needed. https://www.multiboard.io/ Added a holder for 75mm bottles. Added new versions of all the bottle holes with a Bolt Hole for the Large…

Pobrania
1427
Polubienia
243
Ocena
5

yandex Alisa держатель

Держатель для Яндекс Станции, состоит из трех частей.

Pobrania
1389
Polubienia
116
Ocena
0

Alice yandex Speaker stand

Alice yandex Speaker stand in which can hide all the wires And install it on the power supply. Привет, сделал подставку в розетку для колонки алисы с часами. Провода убираются внутрь, все держится на блоке питания. При печати (поставить…

Pobrania
1318
Polubienia
74
Ocena
5
P
PrintablesPrintChallenge

ambidex joint (print in place)

A print in place based on the joint used in the LIMS2-AMBIDEX robot. https://youtube.com/shorts/Mo7VGDBU9nI The supports are baked in, so I would recommend not to scale down the model.

Pobrania
1306
Polubienia
216
Ocena
4
P
PrintablesMaximilium XYZ

BioMech Finger Prosthesis (Index Left Hand)

BioMech Finger Prosthesis In 2011 I lost my left hand index finger in a work related accident... Bio Mechanical prosthesis are available... but very expensive…. So I decided to learn how to 3D print, I watch learning videos on YouTube on…

Pobrania
1215
Polubienia
133
Ocena
5
P
PrintablesMaximilium XYZ

BioMech Finger Prosthesis (Index Right Hand)

In 2011 I lost my left hand index finger in a work related accident... Bio Mechanical prosthesis are available... but very expensive…. So I decided to learn how to 3D print, I watch learning videos on YouTube on how work with AutoCAD…

Pobrania
1080
Polubienia
163
Ocena
3
P
PrintablesTaylor

QUICK-CLIP : Kydex Sheath Mounting Clips

NOTE: This is an add-on to the pre-existing "QUICK-CLIP : Base Starter Kit" Post-Processing Difficulty: Easy Tools Needed: Deburring Tool and Small Needle-Nose Pliers Introduction & Instructions: QUICK-CLIP is a versatile mounting system…

Pobrania
1073
Polubienia
377
Ocena
5
P
PrintablesPetr Gaube

Ultimate Pokedex

I reused the idea from brimstone326, see the original thing here: https://www.thingiverse.com/thing:4725342 I like the idea my kid can insert a Pokemon card inside the Pokedex so I just extend it about some other features and the Pokedex…

Pobrania
1041
Polubienia
157
Ocena
4,93
P
PrintablesBearCubsTeacher

Valve Index Controllers: First Base V2

This is a simple, minimalistic base to set Valve's Index controllers on for storage and charging. The base measures 3.625"W x 3.625"D x 2.5"H. The correct charging cables must be used to work with the base properly. A small capsule-shaped…

Pobrania
1030
Polubienia
124
Ocena
4,62

Index Grip for Nerf Blasters

This is an ergonomic picatinny grip I designed primarily for springer nerf blasters with a heavy draw. Taking inspiration from the FAB PTK grip, the key feature of this grip is the forward index finger, which gives excellent grip and…

Pobrania
993
Polubienia
177
Ocena
5
P
PrintablesZodiase

M-LOK Thumb Index

I saw the thumb index from UTG and I thought I could make something similar and it looks like it could be useful. So I made this simple design. If you don't know what this does it's a piece to rest your thumb of the support hand for a…

Pobrania
985
Polubienia
179
Ocena
4,63
P
PrintablesJorge

Zettelkasten Index boxes (Slip Box)

Introduction This model has been specially developed to take full advantage of the printing bed of most printers, which is approximately 200x200 or a little more. but it can also be used for anything else, with saving writing material,…

Pobrania
985
Polubienia
274
Ocena
0
P
PrintablesStaszek Salik

Index Grip for Picatinny Rail

Adapted the original design to fit Picatinny rail. Use two M4x30 screws to secure mount to the rail. Can be printed upright without supports.

Pobrania
930
Polubienia
166
Ocena
5
P
Printablesdtxtr

Fake Kydex: Folded Universal Sheath for Victorinox Fruit Knife

Well, I needed a sheath for a paring knife in the kitchen box of my camper. Printing a knife sheath is mostly problematic since overhangs and layer orientation tend to make the part weak, ugly or simply impossible to print. Then I had the…

Pobrania
914
Polubienia
183
Ocena
4,78

Arisaka indexer M-LOK handstop

Someone wanted over 8 dollars for the files of this handstop, and then was rude to the people who asked him about that ridiculous price, so I decided to make an identical copy of it and release it for free :) 3D printing is a wonderful…

Pobrania
891
Polubienia
82
Ocena
5
P
PrintablesTidal

AAP-01 One Side Charging Handel Ambidextrous left / right

Designed after Easy-Bot-3D's AAP-01 Charging handel to make it one sided. It has the option to use a m5 screw to secure it onto the pistol, however in my testing, its a snug fit and should stay on without the screw. This can be used for…

Pobrania
875
Polubienia
71
Ocena
4,75
P
Printablesradius_mcfly

Pokédex Game Cartridge Holder for Nintendo Switch READ DESCRIPTION PLEASE

I liked the idea and found nothing alike on thingiverse. so i made this EDIT: Some people are having issues with the cartridges falling out. i dont know why it works for some people and some dont. To avoid issues i added two test files.…

Pobrania
833
Polubienia
213
Ocena
5
P
Printablesagepbiz

Print-in-place and articulated F14 with Camo - IDEX

IDEX/Multimaterial version. Single extruder version: https://www.prusaprinters.org/prints/77500-print-in-place-and-articulated-f14-jet-fighter-wit Stand:…

Pobrania
814
Polubienia
375
Ocena
4,71
P
Printableskaje

Rose Index - Indexing fixture

This fixture is used for indexing work using a vise and square for 45, 60, and 90 degree angles. Of course this printed version is not going to be as durable or precise as the commercial metal version, but should still be useful for many…

Pobrania
765
Polubienia
22
Ocena
5
P
PrintablesSridev

Index card holder

Created this for my daughter's school supplies. Printed at 0.3mm Draft in silk PLA, no supports needed. Included separate 3MF files, you can also print them together if you want. If you print this, please post a make. Feedback and…

Pobrania
757
Polubienia
69
Ocena
5
P
Printables3D Printy

Customizable Rolodex - Works with Filament Swatch System (OpenSCAD)

This customizable Rolodex works with both regular Rolodex cards as well as filament swatches ! https://youtu.be/YvJMhSLk8PI https://youtu.be/Cnv59R2LXv0 How do I customize this? This is an OpenSCAD project. OpenSCAD is a script-based…

Pobrania
720
Polubienia
216
Ocena
4,88
P
Printablessam elliott

FLsun V400 bed indexer

Updated: Increased overall length and tweaked the mounting holes a little bit to have a tighter fit, still not final yet and more updates to come im sure. Need help indexing your round build plate on your FLsun V400? Try this and let me…

Pobrania
641
Polubienia
74
Ocena
5
P
PrintablesLowFastFox

MAZDA MX5 NB Miata Cup holder ('Project DEX')

MAZDA MX5 NB Miata Cup holder ('Project DEX'): ======================================= Purpose: ---------- This design is created to address the issue of having lack of a cup holder available in Mazda MX 5 NB (Miata) from the 90's until…

Pobrania
634
Polubienia
78
Ocena
5
P
Printableseugene

Yandex Alice speaker stand

layer 0.2 infill 20% supports - yes, organic

Pobrania
626
Polubienia
49
Ocena
0

NEW yandex Alisa Alice держатель v2 ( новая версия V2 под Яндекс станцию Алиса)

Незначительные доработки. 1. добавлено отверстие для штекера питания. 2. добавлены отверстия с задней стороны для улучшения звука. 3.Усилена вилка питания БП, под евро-розетку. Все отпечатано в OrcaSlaser, ни каких ошибок, загружены .stl…

Pobrania
596
Polubienia
100
Ocena
5
P
PrintablesTayG0

FLSUN V400 Build Plate Guide/Indexer

Guide for aligning (indexing) your v400's build plate. I printed mine with the following settings: 3 Perimeters 3 Bottom Layers 0 Top Layers (top side of print is hidden once attached) 20% Gyroid Infill No supports Installing: Attaches to…

Pobrania
538
Polubienia
57
Ocena
4,88
P
PrintablesPeaKay

Valve Index Rear Cable/Wire Clip

General: Designed this cable clip replacement for my Valve Index after the original one broke. It should be an easy replacement, as it was designed after the original clip. If it doesn't fit perfectly or you have tolerance problems with…

Pobrania
523
Polubienia
48
Ocena
5
P
PrintablesIsaac Corbrey

Baggage Claim: The Amazing Tea Bag Rolodex

UPDATE: Check out the updated model for improvements and broader compatibility! The Baggage Claim is a fully 3D printed tea bag rolodex that requires zero hardware. It should pressure fit any size tea bag in the list below. Make sure to…

Pobrania
509
Polubienia
315
Ocena
5

SuperCool! Index Card Organizer

This is an index card organizer/sorter I made for myself and figured someone else might find some use out of it. I use index cards religiously now to organize information and needed an… index of sorts to keep them organized ;) (I am…

Pobrania
496
Polubienia
97
Ocena
5
P
PrintablesSteve

Valve Index Controller Wall Mount

Can be mounted to a back plate with #6 wood screws, or directly to your wall with medium Command strips . Filament shown: 3DPrintingCanada Black Value PLA Print Settings Layer height: 0.2mm Infill: 20%

Pobrania
492
Polubienia
81
Ocena
4,86

Pokemon Pokedex Keepsake Box

The Pokedex box is a small storage display for all sorts of things like keepsakes, jewellery, makeup, cards or whatever you can fit in there Prints in pieces and assembles easily with some super glue. for the small red, yellow and green…

Pobrania
492
Polubienia
177
Ocena
5
P
PrintablesBearCubsTeacher

Valve Index Controllers: The Boomerang BCT

As hinted in my first creation page ( http://www.thingiverse.com/thing:3744655 and which I will now call "First Base V2") I have made a version that has a larger footprint, and allows the Valve Index controllers to be inserted while in a…

Pobrania
482
Polubienia
67
Ocena
4,92
P
Printables3D Printy

Rolodex Compatible Filament Swatches (OpenSCAD)

There highly customizable filament swatches that are compatible with Rolodexes! Don't have a rolodex? Print one! https://youtu.be/Cnv59R2LXv0 How do I customize this? This is an OpenSCAD project. OpenSCAD is a script-based modeling…

Pobrania
474
Polubienia
149
Ocena
5
P
PrintablesDroodle

Dextro Energy EDC case, made for Diabetics.

Sugar in some sort should be EDC by all diabetics and Dextro Energy is a good option in my opinion. The case will prevent the packaging from ripping and the tabs to crumble in your pocket or purse. It is a bit snug in the beginning but…

Pobrania
472
Polubienia
47
Ocena
4,5
P
PrintablesLeorockford

Dillon xl650 Index Ring - Aro Indexador

In the project, there is the scaling necessary for the contraction of the ABS. It has additional support and perimeters. "YOU MUST PLACE THE METAL GUIDE PIN FOR THE SPRING" En el proyecto, esta el escalado necesario para la contraccion…

Pobrania
467
Polubienia
21
Ocena
0
P
PrintablesSFS

iPhone 17 Pro Max Dual-Material Bumper Case (IDEX TPU + PLA)

This is a hybrid dual-material bumper case for the iPhone 17 Pro Max, inspired by Apple’s original bumper case and redesigned for modern camera bumps, MagSafe, and multi-material 3D printing. The case is designed specifically for IDEX…

Pobrania
446
Polubienia
22
Ocena
4
P
PrintablesBig O

Pokedex

This design features a fully working hinge and is modelled after the pokedex from the first season of pokemon. Depending on your print settings the hinge can print a little stiff and may require a little sanding to make smooth. I used…

Pobrania
439
Polubienia
65
Ocena
5
P
PrintablesJohnMartin

Extension Cord Reel - 50ft (15m) - Ambidextrous

This pushes the outer limits of the X1C's 256mm bed. It's 250mm in diameter. If you're a perfectionist, pause the print and remove the purge lines before letting the first layer go down. It's easy enough to trim it off if you don't. I…

Pobrania
432
Polubienia
97
Ocena
5
P
Printables3D Printy

Rolodex Gift Card Clips

These gift card clips are compatible with Rolodex stands. Don't have a Rolodex? We have you covered! This remix combines a Customizable Rolodex with the card clips from the Novel Wallet into a new gift card organizer.…

Pobrania
430
Polubienia
106
Ocena
5
P

Gridfinity Index Card and Pen Holder

Simple Gridfinity box for index cards and/or 3x5 post-it notes, plus two writing implements. Wells for pens fit regular Sharpie markers, many types of mechanical pencil and our beloved Pilot Acroball-2 black and red pen.

Pobrania
427
Polubienia
92
Ocena
5
P
PrintablesFelix

Ambidextrous Desiccant Scoop - No Supports

I wanted an easy-to-use and easy-to-print scoop that gives great control for putting desiccant pearls into various Dry Boxes inside my Bambu Lab AMS without needing an extra funnel. The only scoops I found were too hard to use, too hard…

Pobrania
425
Polubienia
46
Ocena
5
P
PrintablesGriddex

Gridfinity (Griddex) - "The Handsome Cable Organiser" Holder x7 Mini

5x2 Gridfinity compatible "The Handsome Cable Organiser" Holder x7 Mini The Handsome Cableorganizer by GiantBrain | Download free STL model | Printables.com Print details: Ender 3 S1 PRO PLA 15% Infill CHEP EXTRA FAST 0.28MM CURA SETTINGS

Pobrania
414
Polubienia
174
Ocena
5
P
Printablesalgotn

Valve Index HDM + Controllers Wall mount

I wanted a decently good looking wall mount for the hmd + controllers, and none of the existing ones really checked all the boxes for me. Controllers I liked how the AMVR mount held the controllers, but I prefer printing stuff like this,…

Pobrania
410
Polubienia
36
Ocena
5
P
PrintablesUpendragon

Index Card Stencils & Pocket Keeper

Pocket case for 3x5index cards with Task list stencil and stencil for lined and/or (.25")Grid paper. As shown both stencils are stored in the case with room for ~20cards. I carry cards in my pockets for quick note taking and needed a…

Pobrania
408
Polubienia
145
Ocena
4,67

Alice stand yandex station

yandex station lite stand, diameter 98mm

Pobrania
406
Polubienia
69
Ocena
0
P
PrintablesKinematic Digit

Flexi Dog Leash bag and treat dispenser (ambidextrous)

This is a remix of two great designs that I improved for the pet poo bag and treat dispenser for the Flexi Dog Leash. Both were great by themselves when I used them, but there were a few issues I had with the original Flexi holder that…

Pobrania
405
Polubienia
73
Ocena
4,8
P
Printablesapirkle

Adex Adjustable Club Spacers

Printed spacers for the Adex Club system. Adding a low-mass spacer allows more configurations for the club by increasing the lever arm without adding (much) weight. This allows the club to stay a constant length through different weight…

Pobrania
401
Polubienia
12
Ocena
0
P
PrintablesAustin Lively

Kydex Style Mag Retention Inserts

Quick printed version of the kydex AR mag inserts you'll find in nicer pouches. If printed in PLA they will creep over time, but I've found the retention to still be pretty reliable over time. Obviously higher temp resistance materials…

Pobrania
397
Polubienia
29
Ocena
5
P
PrintablesVVlasy

Valve Index Cable Strain relief

I noticed a kink forming on my index cable right at the original cable clip on the rear left side (see second picture). So I wanted a solution to help avoid that. A side benefit is the cable now comes out directly behind you so I am now…

Pobrania
394
Polubienia
84
Ocena
4,67
P
Printablesftoerring

Pokédex Foldable Xteink X4 Case

The moment I saw people 3D printing cases for the Xteink X4, I knew I had to make a Pokédex case! This case can be 3D printed as-is, or in multicolour if you want the full Pokédex look! Since I don't have access to a multicolour printer,…

Pobrania
388
Polubienia
111
Ocena
4,5
P
Printablescovertpluto3502

Voron 2.4 bed stop/indexer

Simple bed flex sheet alignment solution using two M3 screws, compatible with all voron 2 sizes This design uses a screw (like the Prusa heatbed) to align the bed, so no more plastic parts physically in contact with the bed. I've been…

Pobrania
386
Polubienia
83
Ocena
5
P
Printablesajblackie

Index Card 1-3-5 Task List Holder

Small holder and template for creating a simple task list from index cards that uses the 1-3-5 method (one big/important task, 3 medium tasks, and 5 small tasks/reminders). It's a helpful persistent reminder for me on my desk. I use it…

Pobrania
385
Polubienia
81
Ocena
5
P
PrintablesLolatron

Valve Index Cable Strain Relief.

Edit 12/17/2022: Tape based solution failed extremely fast at around ~5 months same failure mode as last time, “snow” and audio clicking and display cutouts. It created too much strain on the joint on the back of the headset and failed…

Pobrania
378
Polubienia
87
Ocena
5
P
PrintablesDeVsFaN1830

Valve Index Lens Cap

Remixed a lens protector and closed one end to create a lens cap to protect the lenses from dust and light when not in use. Printed in TPU to prevent scratching of the lens holders and also to create a friction fit. Your tolerances may…

Pobrania
368
Polubienia
62
Ocena
5
P
PrintablesSambaSol

Support-free remix of Pokédex Game Cartridge Holder for Nintendo Switch by radius_mcfly

Just flattening one side of the connecting pin and a simple addition of a few wedges to radius_mcfly's remix to eliminate the need for supports when printing. Printed on my AnkerMake M5 without support or brim. I did need to clean up the…

Pobrania
368
Polubienia
60
Ocena
4,75
P
Printables84_Most_Wanted

Index Card Holder with Stencil Templates (A6 & Mini)

This project includes two index card holders (A6 and Mini) and matching stencil templates for drawing lines, checkboxes, and weekly planners. The holders keep your cards organized and easy to access, while the stencils allow you to create…

Pobrania
366
Polubienia
201
Ocena
4
P
PrintablesMottN

Sauce Packet Roldex

I made this remix of tetralite's SD card rolodex as a joke because I thought the idea was pretty funny. Takes several m3 screws, and fits most normal sized packets.

Pobrania
365
Polubienia
117
Ocena
5
P
PrintablesAvianna

Magnetically indexed Brio compatible multiway turntable

Uses 6mm diameter by 2.7mm tall magnets. The fit of the magnets is tight, but put a tiny bit of super glue in there to make sure they don't come out. It is important to orient the magnets correctly when inserting them. I put all the…

Pobrania
362
Polubienia
67
Ocena
5
P
PrintablesStefan

Ender 3 IDEX Edition

This is an IDEX conversion for the Ender 3 and Ender 3 pro. The files here include the two X-axis motor/idler mounts, belt mounts to use the ApolloLander toolhead with this setup (see below), and an optional drag chain mount. I printed…

Pobrania
353
Polubienia
74
Ocena
5
P
PrintablesAusRetro

Twilight Imperium 4 Insert (+ Prophecy of Kings and Codex I, II, III)

This is Hrein's model for TI4 and the Prophecy of Kings expansion with some modification by me. The description is copied directly from Thingiverse with my changed in bold. The excess space left in the models by Hrein allowed me to modify…

Pobrania
345
Polubienia
38
Ocena
5
P
PrintablesEvgenius

Yandex station mini holder

Yandex station mini holder

Pobrania
342
Polubienia
20
Ocena
0
P
PrintablesMatschineggN

Drill Bit Index

Printed at 0.2 layer height with supports only from build plate for the index base. Designed for 15 bit Milwaukee cobalt set.

Pobrania
342
Polubienia
61
Ocena
5

Retro-Style Stand for Yandex Alisa Smart Speaker

Эта подставка для умной колонки Яндекс Алиса создана в стиле, который напоминает ретро-эстетику, но при этом гармонично вписывается в современный интерьер. Конструкция представляет собой ложе на трёх аккуратных ножках, поднимающее колонку…

Pobrania
341
Polubienia
50
Ocena
5
P
PrintablesRuby

Dexter "Dex" Morgan

Dexter "Dex" Morgan wall art first 3 layers print on 50% speed

Pobrania
341
Polubienia
23
Ocena
4
P
PrintablesGriddex

Gridfinity (Griddex) - Caliper Holder

2x 1x1 Gridfinity holder for top and bottom of calipers Print details: Ender 3 S1 PRO PLA 15% Infill CHEP EXTRA FAST 0.28MM CURA SETTINGS

Pobrania
338
Polubienia
61
Ocena
5
P
PrintablesReyMaker

Index Card Holder

This was done in inches, so if you have to scale it up, do so by 2540% (1in = 25.4mm). I measured 80 index cards at 17.1mm, gave it 20mm and 2mm walls. YMMV since different cards have different thicknesses. I use this for keeping notes…

Pobrania
333
Polubienia
20
Ocena
5
P
PrintablesJaroslav Klaus

Kydex pocket clip

Pocket clip that attaches to a kydex sheath

Pobrania
329
Polubienia
33
Ocena
0
P
Printableshoeni

Index card box (DIN A8) with flexible separators

Please see here for an updated Version V2 with a snap-on-cover. Since my son started learning Latin recently, learning vocabulary with paper cards still seems a helpful aid, even in the digital age. DIN A8 seemed like proper size for…

Pobrania
328
Polubienia
32
Ocena
5
P
PrintablesGosga365

Kanto Pokedex ID holder

This is a holder for ID cards like the ones found for student ID's at Universities. Print instructions This is a holder for ID cards, like the ones used at Universities. It was designed to hold 1 plastic ID with dimensions 3-3/8 x 2-1/8 x…

Pobrania
326
Polubienia
59
Ocena
0
P
PrintablesFredMF

Valve Index Valve Knob ++

Remodeled the whole thing. And Centered the axis. Split it in 2 Parts so i can be printed in 2 colors. Joined by a Thread, no glue needed, thread is strong enough for intended use. Thanks a lot gwizdavid and REDxFROG for the nice design…

Pobrania
316
Polubienia
90
Ocena
5
P
PrintablesGriddex

Gridfinity (Griddex) - AA Battery Holder

5x1 AA battery holder that works with the Gridfinity system. Print details: Ender 3 S1 PRO PLA 15% Infill CHEP EXTRA FAST 0.28MM CURA SETTINGS

Pobrania
316
Polubienia
32
Ocena
5

SuperCool! Gridfinity Index Card Tray

**v2 Update I have added a rounded corner on the front grabbing edge (as per requested) and removed the magnet holes. The model now includes a .step file for better slicing in Bambu Slicer. Simple holder for blank index cards / notecards.…

Pobrania
315
Polubienia
46
Ocena
5
P
Printableshenriksten65

Can lid with Monster logo (IDEX)

Thought it would be fun to create a can lid to keep insects away and make use of the IDEX functionality of my printer. I used the Monster logo from https://www.thingiverse.com/thing:332550 and wrote some OpenSCAD code for a lid and to…

Pobrania
312
Polubienia
27
Ocena
0
P
PrintablesZack Z

Elk Fest (Elchfest) Dexterity Board Game

Elk Fest (Elchfest) is a fun and portable dexterity game for two people: http://www.rozmiarek.info/games/reviews/ElkFest.html The game is out of print, so this is my attempt to model the pieces to their true sizes. For the game you'll…

Pobrania
310
Polubienia
14
Ocena
0
P
Printablestrial_attorney

Skadis mount for Yandex Mini (Alisa)

Держатель для Яндекс Станции (версия Мини с часами) для панели Ikea Skadis. Требуется распечатать 1 основной держатель и 2 вставки с крюками. Если принтер корректно настроен, вставки вщелкиваются очень плотно и необходимость добавлять…

Pobrania
308
Polubienia
38
Ocena
0
P
PrintablesGriddex

Gridfinity (Griddex) - C2032 Battery Holder

1x1 C2032 battery holder for the Gridfinity system. Print details: Ender 3 S1 PRO PLA 15% Infill CHEP EXTRA FAST 0.28MM CURA SETTINGS

Pobrania
308
Polubienia
41
Ocena
4,88

Index Grip V2

This is the newest iteration on my ergonomic picatinny grip, with a slew of new features. Updates from V1: • Key now tightens against the blaster, creating a tight fit, regardless of blaster. • The Index finger location has been moved in…

Pobrania
306
Polubienia
38
Ocena
5
P
PrintablesDrewmund

Nerf Index Grip (shortened)

Just a slightly shortened version of the original index grip. I removed about 2.5cm from the front to look better on shorter barrels without sacrificing the index finger grip. Use with the original grip key.

Pobrania
304
Polubienia
40
Ocena
1
P
PrintablesBurak Burak

Dexter blood slide box

I couldn't find any sample designs, so I made one myself. This is my first design—hope you like it! You will need to att

Pobrania
299
Polubienia
29
Ocena
0

Держатель для Яндекс станции Лайт / Yandex Station Lite Alice mount

Держатель в розетку для Яндекс Станции Лайт, есть карман для провода.

Pobrania
294
Polubienia
20
Ocena
5
P
PrintablesIc3

Pylon 2 farbig IDEX

Man zieht alle 5 Teile mit dem Namen “Kegel” in den Slicer und es wird in der Regel erkannt das es sich um ein Objekt mit mehreren Teilen handelt. Die Positionen wurden aus Fusion360 mit übergeben. Danach kann man ich entscheiden, welche…

Pobrania
289
Polubienia
9
Ocena
0
P
Printablesexstyle

Gridfinity Drill Index for Milwaukee Bits

Created for a Milwaukee 29 Piece Drill bit Set such as this one: https://www.homedepot.com/p/Milwaukee-SHOCKWAVE-IMPACT-DUTY-Titanium-Drill-Bit-Set-29-Piece-48-89-4632/205879025

Pobrania
288
Polubienia
81
Ocena
5
P
PrintablesJimbob

Rugged Box - Small First Aid box - For dual extruders / IDEX printers

IMPORTANT: Check that your slicer can open the lid 3MF file first! My slicer is Bambu Studio . It looks like Cura doesn't open it correctly, and I don't know why! Sorry! I've added a lid STL in, which has very very very slightly indented…

Pobrania
287
Polubienia
86
Ocena
0