Wyniki wyszukiwania: doors

Sortowanie

1223 modeli

P
PrintablesGlennovitS 3D

Springy Doorstop (flexible and in multiple sizes!)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Pobrania
14 983
Polubienia
3589
Ocena
4,69
P
PrintablesExtrutim

Doorstop Multimaterial | Door Stopper Multi-Material | Rubberized Door Stop

A simple doorstop for multi-material printing! Intended to print the contact surfaces from flexible filament, of course this is not a must ;) As flexible filament doesn't really bond well with e.g. PLA, the two parts are slightly…

Pobrania
7426
Polubienia
2062
Ocena
4,92
P
PrintablesJosh Makeshift

IKEA KALLAX Cabinet doors

IMPORTANT In the current orientation, the door handles will snap . Please print them on its side and with supports to improve their strength. I designed and 3D printed cabinet doors for IKEA shelves. They don't require any screws, utilize…

Pobrania
6737
Polubienia
4977
Ocena
4,81

Practical doorstop

Stop it! Yes, I'm back with more bad puns and a useful print. This practical, easy-to-print design was something I threw together in Fusion 360. I didn't want a Hodor (sorry) or a solid doorstop. Instead, I wanted something that would…

Pobrania
4493
Polubienia
207
Ocena
4,82
P
PrintablesEnely

Fridge with doors that open and fridge props

The doors are assembled by using filament as hinge rod. Insert it from bottom and up. The fridge is sized to fit with Sylvanian families the material should be thick enough to be re-seized to also fit Playmobil. Just contact me if that…

Pobrania
3677
Polubienia
622
Ocena
4,92
P
PrintablesART TOO
Pobrania
3612
Polubienia
460
Ocena
4,82

Knobs and handles for doors and drawers

Knobs and handles for doors and drawers, The screw hole is reinforced with 3 perimeters, I recommend when softening the layers at the top and rounded parts, they look better Update!!! Added stl model files Here you will find the 2nd…

Pobrania
3553
Polubienia
1750
Ocena
4,94
P
PrintablesBlueberry Thor

LOTR Doors of Durin w Gandalf Wall Art Decor

Lord of the Rings "Doors of Durin with Gandalf" 2D silhouette wall art decor

Pobrania
3065
Polubienia
975
Ocena
4,97
P
PrintablesDrewDeeDoo

Door Stop doorstop

-Prints with no supports or brims -Tension fits on your door -No tools or assembly -Fits door gaps of 12.5mm or larger You can scale the model in you slicer to fit different door depths. Currently sized to fit standard American interior…

Pobrania
2962
Polubienia
856
Ocena
4,89
P
Printables3D KIMBA

Doorstop Pocket Version – The Perfect Travel Companion

Doorstop Pocket Version – The Perfect Travel Companion Product Description The Doorstop Pocket Version is a compact, travel-friendly solution to keep any door securely in place. Designed for maximum portability, it fits easily in your…

Pobrania
2029
Polubienia
651
Ocena
4,89
P
Printablesby wmontoza

Dog Doorstop

MORE MODELS BY WMONTOZA DOOR CLAMP CAT DOOR STOP SHELF TABLET SUPPORT DESCRIPTION Door clamp/door catch/door holder/doorstop/door stop dog Trava de porta / Calço de porta cachorro Abrazadera de puerta perro Türklemme Hund Arrêt de porte…

Pobrania
1835
Polubienia
329
Ocena
4,94
P
PrintablesSøren H.G.

Doorstop

Practical and aesthetic doorstop

Pobrania
1703
Polubienia
74
Ocena
4,73

Kit for Removable Panels/Doors for Voron V2/Trident using Strong Snap Latch

Stronger Snap Latch with M3 Screw Because any voron builder has tons of spare M3 screws! This repo is based in the amazing works from: Original Snap Latch:…

Pobrania
1690
Polubienia
441
Ocena
4,67
P

Doorstop

A practical doorstop available in two printing variants so you can choose the ideal setup for your printer and materials. Both versions are designed for reliable grip on the floor and easy printing. 🌀 Variant 1: Full TPU This version is…

Pobrania
1591
Polubienia
461
Ocena
5
P
PrintablesOregongeek

Dead Guy Doorstop Resurrected

I had an old print of a similar doorstop. When mine went missing, I searched the internet for the original design file. Not finding it, I recreated the doorstop from memory. Turns out the original was still hidden deep on Thingiverse.…

Pobrania
1236
Polubienia
122
Ocena
4,94
P
PrintablesOpenFigure3D

Crucifix - DOORS Roblox item

Crucifix - DOORS Print this suuuper easy miniature of the Crucifix, an item from DOORS, a ROBLOX horror game developed by LSPLASH and RediblesQW. Scale up in Z (turn off uniform scaling) to make it thicker. Thank you for printing our…

Pobrania
1209
Polubienia
51
Ocena
5
P
PrintablesRamBros

BOX Car w/ Doors - Dragon Railway

BOX Car - Dragon Railway 1/64 Scale Assembly Manual: Google docs You will also need: Freight Bogie V1 Auto Coupler V1 Check out the Dragon Railway ecosystem! Join our Discord Print settings: Cura 3MF file

Pobrania
1079
Polubienia
133
Ocena
5
P
PrintablesRapiddescent

Yoda Doorstop

Loved this print on Thingiverse by @Mikencks but needed a thin profile for low door clearances. His doorstop is a remix of @Huanksta Yoda bookend https://www.thingiverse.com/thing:2950013 This is my first print project, learning a lot of…

Pobrania
1045
Polubienia
140
Ocena
4,8
P
PrintablesI_SEE

Lord of the Rings; Doors of Durin; Moria

This is a backlighted print of the Doors of Durin. You can print it without MMU. With this G4 socket LED: https://www.amazon.de/gp/product/B07WWLQ4WQ/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 and this 12V powersource:…

Pobrania
989
Polubienia
239
Ocena
4,8
P
Printablesfloano

Modular organizer for kitchen cabinet doors

Customizable storage solution for kitchen cabinet doors. With a modular design, they can be combined to create a storage unit that fits specific needs, and adjust it as changes are needed. Each box is designed to fit securely into the…

Pobrania
952
Polubienia
634
Ocena
4,86
P
PrintablesChirimorin

Elegoo Centauri Carbon ventilated riser with magnetic doors

This is a ventilated riser for the Centauri Carbon with hinged magnetic doors. Can be easily customized to your liking right in your slicer! Before printing! This model has some tight clearances, while the Centauri Carbon can easily print…

Pobrania
951
Polubienia
291
Ocena
4,94
P
Printablesparalepsis

Gloomhaven: Doors

Doors! I've been working on this for a while, trying to come up with something that would keep a door in place nicely but would also leave room for all the models to stand in the door once removed. Same door fits both bottoms. Print door…

Pobrania
898
Polubienia
128
Ocena
5
P
PrintablesUniversalMaker

A Fish Tank Castle With Swim Through Windows + Doors

Important: You need to Print in save materials like ABS, PETG or PLA to avoid harming your fish! (at your own risk) Immerse your fish pets in a majestic underwater kingdom with the Fish Tank Castle featuring swim-through windows and…

Pobrania
846
Polubienia
163
Ocena
5
P
PrintablesElothan

Cabinet knobs for Bookcase doors - Fits IKEA Billy

I wanted to spruce up my bookcase doors with some nicer doorknobs, so I whipped up two different versions in Fusion. Screws in easily and grabs the scew well. I would recomend to print these with atleast 4 walls, so make sure the inside…

Pobrania
821
Polubienia
111
Ocena
4,94
P
PrintablesJerrod H

Print-in-Place Hinge for 1/8" Acrylic Doors for 4040 Extrusion Enclosure

A simple door hinge for 4040 aluminum extrusion and 1/8" or 3mm-thick door panels . Recommend ¼" or 5 mm bolts for the door, and 5/16" bolts on the side for the 4040 extrusion (8 mm T-slot nuts). Supports are required on the hinge face…

Pobrania
816
Polubienia
356
Ocena
3,5
P
PrintablesOpenFigure3D

El Goblino - DOORS Roblox

¡Oye! El Goblino - DOORS Print this cool and easy figurine of El Goblino, a character from DOORS, a ROBLOX horror game developed by LSPLASH and RediblesQW. This model comes in two parts, head and body. Both can be printed without supports…

Pobrania
789
Polubienia
72
Ocena
0
P
Printablesdavemoneysign

DOORSTOP

We have several doors around the labs at work and we often need to prop them open. We had the opportunity to make some new ones, so I hopped on the computer, fired up Fusion360 and started designing. This doorstop prints well with a color…

Pobrania
781
Polubienia
95
Ocena
5

Knobs and handles for doors and drawers 2.edition

I see that the first edition is liked so I prepared 2 edition .I mostly give m3f files, I will try to make models in stl files as well, but I can't merge some parts. Warning! Parts knob 3,4,5 have been updated and fixed, If you have a…

Pobrania
769
Polubienia
179
Ocena
4,25
P
Printables3D KIMBA

HexDish SignalBoost: Amplify Your Phone Signal Outdoors

HexDish SignalBoost: Amplify Your Cell Signal Outdoors The SignalBoost HexDish is a modular parabolic reflector designed to enhance cell signal reception in remote areas like forests, campgrounds, or anywhere with limited coverage.…

Pobrania
769
Polubienia
689
Ocena
5
P
PrintablesDrakka01

Pocket Doors for Lack Enclosure v2

Parts to make the front doors on Lack Enclosure v2 slide back into the enclosure once fully opened. Since it's best to leave them open for some filaments such as PLA, I wanted them to not be swinging outward where they could be in the way…

Pobrania
757
Polubienia
231
Ocena
4,77
P
PrintablesYepher

Universal Lid Holder for Kitchen Cabinets Doors

A lid holder that mounts inside a kitchen cabinet door using Velcro command strips. Can mount multiple side-by-sides to allow for storing more lids.

Pobrania
725
Polubienia
617
Ocena
5

Knobs and handles for doors and drawers

Knobs and handles for doors and drawers - 3 edition , angular shapes I hope you will find a favorite among the models again I recommend when softening the layers at the top and rounded parts, they look better The combination of colors is…

Pobrania
722
Polubienia
248
Ocena
5
P
Printablesinhabitworks

Future Doorstop

With this tool you can halt door movement in futuristic style, by manually adjustment in spatial placement. The form intrinsically supports the use of elastic/rubber bands as floor-side grip, which also prevents any damage to the floor or…

Pobrania
721
Polubienia
200
Ocena
5
P
PrintablesDarek

Doorstep for Landy Mini

Door step for Landy Mini. Print twice for left and right side. Mount using screw from the Landy model. Best result when printed in two colors.

Pobrania
704
Polubienia
85
Ocena
4,93
P
Printablesjerrydi

Zombicide Doors

Doors for the game Zombicide. Composed of a base and a common frame on which are put the various doors. Service door, with hatch, cell, house, barricade and armored. Portes pour le jeu Zombicide. Composé d'un socle et d'un bâti communs…

Pobrania
696
Polubienia
68
Ocena
4,5
P
PrintablesZemoj

Variable Height Doorstop / Door Stop

Printed at 0.2mm resolution with 20% infill and 2mm brim. Works best on carpeted floors.

Pobrania
688
Polubienia
57
Ocena
4,9
P
PrintablesFlyBy Tom

Mercedes Sprinter Doorstop

Doorstop for a Mercedes Sprinter side door. Stops the door halfway (or where ever you want it to). Attaches to roller track with double-sided tape and acts as a trap for the door roller. Door can be pushed over and past the stop to fully…

Pobrania
686
Polubienia
28
Ocena
5
P
PrintablesRobertusMaximus

Greebles Part 3! Doors! Doors! Doors!

Greebles Part 3! Doors! Doors! Doors! In need of heavy-duty armoured hatchways and doors? Here you are! Two sizes, with access pads and without. No support required The code and model files are using “Hatchbox” pla. Change if you are…

Pobrania
664
Polubienia
143
Ocena
5

Knobs and handles for doors and drawers

Knobs and handles for doors and drawers - 5 edition - patterns I hope you will find a favorite among the models again I recommend when softening the layers at the top and rounded parts, they look better The combination of colors is nice,…

Pobrania
645
Polubienia
224
Ocena
5
P
PrintablesNeopyx3D

Squished Cat Doorstopper

Now you can hold your door open with style! I promise, no animal was hurt during all tests! The “Squished Cat Doorstopper” comes in 3 wedge variations. The paws are seperated for easy multicolor printing. Just glue the paws and…

Pobrania
622
Polubienia
158
Ocena
5
P
PrintablesGeekware

Removable pinned hinge doors for Ikea Lack Enclosure

In keeping with the original look of the front doors of the Original Prusa i3 MK3 Enclosure, this is a redesign of the front door hinges and front corner blocks so you can remove the doors when organizing or doing maintenance on the…

Pobrania
621
Polubienia
256
Ocena
4,83
P
PrintablesWout

Prusa Lack Enclosure Sliding Doors

Hi everyone! If you have the original Prusa enclosure but you want to print with the doors open, than the doors stick quite some distance out. Personally i didn't like that so i made a version that the doors came beside the enclosure! I…

Pobrania
595
Polubienia
256
Ocena
3,5
P
PrintablesMr. Bartzabel

Doorstop

Just a simple doorstop for you everyday use! This is one of my first models up here, so feel free to try it out, I would love to hear some feedback! Print instructions nozzle-ø: 0.4mm layer height: 0.2mm infill: 20% print time: 1h 27min

Pobrania
595
Polubienia
31
Ocena
5
P
PrintablesVirtuallyJason

Openable Doors for Resident Evil 2 Board Game

I originally made these doors for the Resident Evil 2 board game to integrate with the modular walls that I created, but then I got to thinking that someone might like to use the doors without the walls... so I made these! It's a real…

Pobrania
591
Polubienia
75
Ocena
5
P
PrintablesMarcin Bielecki

Hanger for Cabinet Doors / Simple Coat Hanger

Prosty wieszak na ubrania do wszystkiego, co kwadratowe. Szerokość wynosi 20 mm. Można skalować, aby dopasować do innych szerokości. Dwa rozmiary do wyboru: 65 mm i 95 mm

Pobrania
589
Polubienia
82
Ocena
5
P
PrintablesRagout3D

Doorstop

A strong and stylish 3D-printed doorstop, available in two versions: one with a single color and one with a multicolor ring. Comes with optional stick-on grips underneath for extra stability. Ideal for home, office, or classroom use.

Pobrania
582
Polubienia
176
Ocena
4,33
P

Groot Türstopper /Doorstopper

I fully understud the conzept of Groot is holding the door but somehow I like him to face the room therefore Groot was turned by 180°.

Pobrania
580
Polubienia
45
Ocena
5
P
PrintablesCorey

Lightweight HeroQuest Dungeon Walls and Doors

Some of these full HeroQuest dungeons are absolutely beautiful. I would be amazing to print out, paint, and play on these master pieces…. but then I think of “where do they store these works of art??”. Enter my easy to print, easy to…

Pobrania
575
Polubienia
77
Ocena
4
P
PrintablesJLS

Sovol SV08 Doors (JLS Mod V2)

This model uses only the existing holes in the frame of the SV08, it also uses Sovol's magnetic fixing system and handles. Although the magnetic fixing system has ben redesigned for a sotfter close, using only magnets, bolts and printed…

Pobrania
557
Polubienia
66
Ocena
5
P
PrintablesBrian K

Door Bar Clamp for push-bar doors

This item will fit most push-bar type doors, holding the bar in so the door can freely be pushed open or pulled open from the other side. Mine were printed in PLA and work great.

Pobrania
526
Polubienia
22
Ocena
5
P
Printablesfixumdude

Magnetic (or stick on) Icicle decoration for doors or windows

Icicle decoration should print without supports. Supports may be used on the magnet holes if required. Space for (3) 12mm (1/2") magnets to stick to a metal door frame, or just tape/command strip in place. Mine also stuck to the metal…

Pobrania
525
Polubienia
201
Ocena
5
P
PrintablesTigerTone

Mansions of Madness: Doors - (Updated: 04/01/23)

Update: - (0 4/01/23) NEW v2 Files: I have added a wooden textured floor to the door bases and hinges to both the open doors. You will find these as v2 files which now gives you a total of 6 different doors. I designed these doors after…

Pobrania
516
Polubienia
72
Ocena
5
P
PrintablesMatthew Houston

Spring Doorstop / Door Catch

I've added an additional F3D and STL file for a minor improvement of rounding off some of the sharp edges. Should make it more family friendly if putting it in high traffic areas! Needed a catch doorstop but didn't want to mess around…

Pobrania
501
Polubienia
168
Ocena
4,6
P
PrintablesCode2

Doors of Durin Diorama

(...) As he looks up at the black night sky, the moon appears. The silver lines grow bright, outling a door formed of two columns beneath an arch, with a star in the center. Gandalf: "It reads 'The Doors of Durin, Lord of Moria. Speak,…

Pobrania
500
Polubienia
128
Ocena
0
P
PrintablesHeribertohobby

Doors and windows terrain kitbash kit

Do you have some terrain projects that need a bit of spicing up? Few things work as the natural features of everyday buildings. Enjoy a small collection of doors and windows that are sure to look amazing on any scratchbuilt terrain…

Pobrania
487
Polubienia
97
Ocena
5
P
PrintablesWetdesign

Snap Buckles for outdoors gear

Made it to have a parametric 3D model for varying outdoor products. It snaps together, and releases nicely by pressing on the sides. This can be resized while maybe print in place will at some stage become questionable. Use ASA filament…

Pobrania
480
Polubienia
73
Ocena
0
P
Printables3DPrintNovesia

Squeezed Kenny Doorstopper

The famous Kenny from your favorite tv show! I modeled it from scratch.

Pobrania
476
Polubienia
253
Ocena
5
P
PrintablesAndrew Liyanage

Cheese Doorstopper

Embrace the perfect blend of functionality and charm with this cheese-inspired 3D doorstopper. Crafted to securely hold doors while adding a touch of whimsy to your surroundings, this unique piece doubles as functional art. Whether in a…

Pobrania
460
Polubienia
164
Ocena
4,89
P
PrintablesTHop3D

Simplistic Cat Doorstop

Simplistic Cat Doorstop. Might need to be scaled for high profile doors. The standart model works for clearances from 2 to 10 mm. If anyone has any questions please contact me, THop3D

Pobrania
456
Polubienia
94
Ocena
5
P
PrintablesEric

Zombicide 28mm Doors - Snappy - Full Plates

I enjoyed how the original snappy doors work, so I took the time to assemble them into separate ‘plates’ for ease of printing.

Pobrania
452
Polubienia
60
Ocena
0
P
Printablescovertpluto3502

DoorSTOP

DoorSTOP - the ultimate functional yet aesthetic doorstopping solution. Guaranteed to start a conversation or at least get someone's attention if someone comes over. What it can do: Hold a door open Not slip on carpet or hard floor…

Pobrania
447
Polubienia
43
Ocena
5
P
PrintablesTorusKnot

Dino-Doorstop

Meet Dino-Doorstop, the dino-mite doorstopper with a Jurassic twist! This adorable, tail-wagging dino is on a mission to hold your doors firmly in place. Dino-Doorstop not only adds a pop of dino-inspired charm to your space but also…

Pobrania
430
Polubienia
101
Ocena
4,8
P
PrintablesRostaP

Rolling doors box

Rolling doors box The box has space for a label, which also serves as a connecting part. * April 2, 2022 Rolling Doors Improved I will add better photos and other sizes of the model later. Recommended printing options Rolling door Pcs: 1…

Pobrania
421
Polubienia
211
Ocena
5
P
PrintablesPapy07

Playmobil doors

Playmobil discontinued castle doors based on Playmobil 3666/3895 compatible with original Playmobil parts. Two creation a “basic door”(easy to print) and a jail door. Two realistics models are able to be printed in two part and glued (No…

Pobrania
417
Polubienia
67
Ocena
5
P
PrintablesStaldy

Hook to hang on doors | Crochet a suspendre sur des portes

[Français en-dessous] [EN] [Update 03.02.2024] I noticed some mistakes in the files I uploaded. I will print more of them, I corrected it for you and add a new one… "Classic" Hook: small place for hanging; 15mm “Large” Hook: bigger place…

Pobrania
416
Polubienia
49
Ocena
5

⇀ Dragon Doorstop ⇀

A cute way to keep doors in place. Rounded model with no sharp edges. Kid friendly. Tail keeps doors in place. Designed to print with Tree Supports on build plate only for EZ removal! Powered by image-to-3D from MakerWorld…

Pobrania
415
Polubienia
118
Ocena
4,5
P
PrintablesNerdyVet

Doorstop with fairy door in two versions

You want the fairies to have access to our dimension at all times, whether your door is open or closed? And at the same time keep your door open or closed? Then this magical fairy door with doorstop is just the thing! It reliably fixes…

Pobrania
411
Polubienia
150
Ocena
5
P
Printableserr404

Mansions of Madness Doors

Doors! This is a set is 16 unique doors for use in your tabletop games. Category: Toy & Game Accessories

Pobrania
410
Polubienia
72
Ocena
0
P
PrintablesAbstractiaDsgn

Doorstop Paper Airplane. Easy print. No supports.

Fun doorstop that resembles a paper airplane wedged under your door. Really simple print that needs no supports as long as you print it wing side down. That will give the nicest finish on the visible side of the wings. I printed in PETG 6…

Pobrania
406
Polubienia
173
Ocena
5

(V2) For BIQU B1 - DIY Enclosure - Remix of Prusa's V2 IKEA Lack Enclosure - with extra doors (opening on 3 sides)

Heads up! This is the new, improved "v2" enclosure... If you were looking for the very popular, original "v1" enclosure, it's still available over here:…

Pobrania
401
Polubienia
136
Ocena
4
P
PrintablesA.S. Design

Doorstop -book holder

This model has been designed as book holder, but you can be used as doorstop if there is not too distance from floor to door.

Pobrania
398
Polubienia
59
Ocena
4,25
P
Printablesby wmontoza

Doorstop Hold Catch Clamp

MORE MODELS BY WMONTOZA DOG DOOR STOP CAT DOOR STOP SHELF TABLET SUPPORT Doorstop / Door clamp / Door catch / Door holder / Door stop Trava de porta / Calço de porta abrazadera de puerta Türklemme Arrêt de porte Fermaporta στάση πόρτας…

Pobrania
395
Polubienia
80
Ocena
4,5
P
PrintablesCMPDesign

Stiffeners for Original Prusa Enclosure doors

When I assembled my Original Prusa Enclosure and used it for the first time, I was a bit surprised at the volume coming from the doors vibrating. In general, the doors were very wobbly. The remedy was these reinforcements I designed,…

Pobrania
389
Polubienia
120
Ocena
4,94

Knobs and handles for doors and drawers

Knobs and handles for doors and drawers - 4 edition , round shapes I hope you will find a favorite among the models again I recommend when softening the layers at the top and rounded parts, they look better The combination of colors is…

Pobrania
381
Polubienia
132
Ocena
5
P
Printablesjettoblack

Rocinante PDC Doors mod

I modified the PDC frame and doors to use a ball and socket mount, which is simpler and more robust than the original version with the tiny pins.

Pobrania
378
Polubienia
33
Ocena
5
P
PrintablesBotanicalWorm99

Rugged Paper Towel Holder for Camping & Outdoors

Print (2) Ends and (1) Middle. Insert a ¼" magnet into each of the ends. Glue the middle section to one of the ends. Fits large paper towel rolls but also works with smaller rolls

Pobrania
374
Polubienia
144
Ocena
0
P
PrintablesChanti

Simple 3D Printable Doorstop

This minimalist doorstop is designed to fit under most standard doors and hold them in place. It features a wedge-shaped design for easy use and a stable hold on flat surfaces like wood, tile, or laminate. Note: This model does not…

Pobrania
367
Polubienia
62
Ocena
5
P
PrintablesBeetleBuild

Practical Doorstop - Carpet Edition

This remix has a toothed grip on one side more suited to carpeted floors. Prints on the side (teeth out), like the original, with no supports.

Pobrania
366
Polubienia
34
Ocena
5
P
PrintablesMuradir

Taverns of Tiefenthal organizer incl. expansion Open Doors (+ custom markers)

I designed this insert, as I wanted the expansion to also fit into the main game's box. Also I wanted to reduce the setup time, so the taverns and the monastery have their own trays. The insert was designed for sleeved cards, but…

Pobrania
362
Polubienia
37
Ocena
5
P
PrintablesTheRooster

#NoWalls Magnetic Doors and Doorways (OpenLock/MagBall)

NoWalls Magnetic Doors and Doorways (OpenLock/MagBall) ======================================================= Part of my #NoWalls Modular 28mm Dungeon Tiles Collection UPDATE:* I have added two additional tile doorways. One is full…

Pobrania
361
Polubienia
56
Ocena
5
P
PrintablesNoroc09

Pulse AIO Doors

I wanted to print some custom doors for the Pulse AIO so I figured it'd be a great time to brush up on my Fusion360! Uses 3x1mm magnets I found on amazon. Printed on Prusa Mk3 0.2 Layer Height 15% infill

Pobrania
357
Polubienia
12
Ocena
0
P
PrintablesHumble Bazooka

N64 Replacement Cartridge Doors

These are drop in replacement cartridge doors for the Nintendo 64. Printer Settings: 0.2mm layer height At least 20% infill Optionally, adjust infill direction to be along the same axis as the doors run so the top layer matches the axis

Pobrania
352
Polubienia
59
Ocena
5
P
PrintablesKuK3D

Doorstop happy person

This is a classic doorstop with a happy person holding your door open. It can stop a door from 2mm to 19mm between the door and the floor. In length it is 125mm long and 78mm wide .

Pobrania
331
Polubienia
40
Ocena
4,67
P
PrintablesPrintyPaws

DoorStop

This 3D printed doorstop is designed specifically for TPU, giving it extra grip and flexibility compared with rigid plastic versions. The wedge shape slides easily under most doors, while the flexible material helps it stay planted on…

Pobrania
330
Polubienia
99
Ocena
5
P
Printablesmorfaber78

DoorStoppers TPU A92

TPU model A92, relatively soft), to fit the door. It is already positioned for printing and does not require supports

Pobrania
322
Polubienia
54
Ocena
5
P
PrintablesAdam L

FlexiStop: Customizable Spring Loaded Doorstop (Parametric)

Do you need a door stopper that is easy to use, durable, and adaptable? Then you might want to try FlexiStop, the parametric door stopper that features a spring loaded arc to keep the door open. FlexiStop works like a traditional wedge…

Pobrania
320
Polubienia
45
Ocena
5
P
Printablesblecheimer

Multiangle Doorstopper with Hanger

Where did I put that doorstopper? Do you know this feeling? You want to stop a door but you cannot find the doorstopper. Again! With this doorstopper this will not happen to you. It has a hole so you can simply hang it to the doorhandle.…

Pobrania
318
Polubienia
101
Ocena
4,86
P
PrintablesMattZA

The Cat Doorstop

The Cat Doorstop Just a cat that sits and holds your door in place. Use the following settings for a good strong print Layer Height = 0.2 to 0.28 Walls = 4 Infil = 35% Wall Generator = Arachne Stick some ducktape on the bottom to keep it…

Pobrania
317
Polubienia
52
Ocena
4,88
P
Printablesprintotter

PivotPrint - An outsidemounted hinge for small doors

Description An outside hinge for you to use. This is meant to be mounted on the outside of a cabinet. There is a left side hinge set and a right side hinge set. Print Instructions Since it needs to take some weight I suggest printing in…

Pobrania
312
Polubienia
154
Ocena
0
P
PrintablesOpenFigure3D

Skeleton Key - DOORS Roblox item

Skeleton Key - DOORS Print this suuuper easy miniature of the Skeleton Key, an item from DOORS, a ROBLOX horror game developed by LSPLASH and RediblesQW. Scale up in Z (turn off uniform scaling) to make it thicker. Pause & color change at…

Pobrania
304
Polubienia
37
Ocena
5
P
PrintablesToolsToMars

Outdoorsy Wine Charms

Wedding Charms, Outdoor/Camping theme.

Pobrania
299
Polubienia
74
Ocena
5

Coffin Bookshelf w/double doors + empty version

Since this model uses bridge infill as the door texture, it's recommended to use Classic instead of Arachne. I provided models with NO shelves and also clean fronts so you can do your thing.

Pobrania
294
Polubienia
151
Ocena
5
P
PrintablesJove

Modular TARDIS (Large) with hinged doors

This is a remix the large version of the front door panel. For all other parts see the original model. The 3MF for the doors includes the cut and color change needed to colorize the lock and handles. Glue is necessary for full reassembly.…

Pobrania
282
Polubienia
78
Ocena
5
P
PrintablesApollo2040

Hex Doorstop

Simple door stopper

Pobrania
281
Polubienia
23
Ocena
4,67
P
PrintablesJosh-3d

Doorstop

[Update] Added a couple slightly taller variations. The 22.5mm version is the original. The 32.5mm adds 10mm. 37.5mm adds 15mm of height over the original. I haven't got a chance to print it myself yet, but wanted to put it out there for…

Pobrania
279
Polubienia
26
Ocena
4,8
P
PrintablesJLS

Sovol SV08 Doors (JLS Mod V1)

The filenames have "x1" or "x2" depending on the number of units that have to be printed, they are positioned with the advised printer orientation. The file with "everything" has all the needed parts with some supports for better printing…

Pobrania
276
Polubienia
51
Ocena
5
P
PrintablesLockHar_

IKEA KALLAX Cabinet Doors REMIX - Kumiko (Kakuasa)

I'm thrilled with Josh Makeshift's IKEA KALLAX cabinet door model , but I wanted different doors. Wanting to try my hand at Kumiko-style modeling, I went with the Kakuasa pattern and I'm super happy with the result. All instructions…

Pobrania
275
Polubienia
96
Ocena
5
P
PrintablesHappy_Tonny

Cheesy Doorstop

Just a funny doorstopper

Pobrania
274
Polubienia
58
Ocena
5
P
PrintablesSteveJohnsen

Door Hinge Shims - for aligning doors in their frames - for 3 1/2" & 4" door Hinges

Many door frames are not square, or the door hinges are not mounted correctly. This causes the door to not fit evenly in its frame. Often, a door will rub on the frame near the top on the latch side, making a rubbing squeal and/or making…

Pobrania
274
Polubienia
39
Ocena
5
P
PrintablesBlizzard

Hexagon doorstop

Introducing the hexagon doorstop - a sleek and ‘hex-traordinary’ solution to keep your doors in place with a touch of hexagonal sophistication. Sporting a multi-faceted geometric pattern made up of hexagons, the best shape in the world!…

Pobrania
267
Polubienia
26
Ocena
0