1432 modeli
Article with build instructions: https://blog.prusaprinters.org/dryboxes-and-alternative-spool-holders-not-only-for-multimaterial-upgrade/ Material: Prusament PLA Galaxy Black
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just print with normal settings (0.20), PLA or PETG would be fine. The only other material needed is a piece of standard PTFE tube. Added sliced files for PLA and PETG
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to use the Prusa Dryboxes with a PTFE-Tubing clamp instead of the plastic-flap gap that the dryboxes currently use. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I used to operate auto rewinder spool holders like https://www.printables.com/model/199248-narrow-double-stand-for-75mm-integrated-auto-rewin inside my dry-box. The challenge with those was that it always was kind of some fiddling with…
Wydruk około 8,49 €–10,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The 21 Cup Rubbermaid containers are getting harder to find and usually more expensive. Here is another great option from the community. https://www.printables.com/model/952313-filament-dry-box-with-rollers This is a spool skate that fits…
Wydruk około 3,70 €–4,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a way to allow printing using a filament while it is still in a drybox. Just drill a 1/2in (~13mm) hole in the drybox and put this in it. There is a version for both the M6 and M10 PTFE push fitings.
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
I didn't like the friction of the steel bars, it was kinda hard to spin the spool even by hand.. So here is my mod: ball bearing spool holde r for (un)Orginal Prusa Drybox. The mount holes are for original , 18mm, bars. There is a version…
Wydruk około 4,16 €–5,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This Auto-Rewinder for Ultimate Filament Drybox combines modified versions of parts from several filament spool auto-rewinder models to provide automatic filament spool rewinding in @GunplaMark 's outstanding The Ultimate Cereal Container…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This mount is for a round hygrometer thermometer from EEEKit which is very easily available on Amazon. The assembly is very easy with 4 pieces of 8x3mm magnets. Two are clipped inside the mount and two are attached to the plexiglass…
Wydruk około 0,24 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fits M10x0.75 fittings. Hardware required is 4xM3 socket head bolts and matching hex nuts. Added a STL for a TPU/TPE seal if the surface isn't even but I haven't used it.
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
M10 screw designed for (Un)original Prusa Drybox for F beam in standalone version. The screws were aligned with the holes in the F beam. They prevent air circulation when the standalone version is not used. Print settings: Recomended PETG…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bought the Polymaker Polybox drybox Edition 2 to keep my filament dry. The box comes with some plastic tubing with a 6mm outer diameter to guide the filament to your printer but no way to mount it your printer. Searched a bit for already…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
Simple passthrough the drybox. You will need to drill a 10mm hole in the wall of the box. Screw the PC4 couplings onto the outer part. I probably don't need to explain anymore :) Material: PETG or PLA (but PETG is better) Layer: 0.2mm…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A compact, sub $10 dry-box that is easy to open, portable, and can be removed and capped off for longer storage, compatible with Vincent's Auto-rewind spool mechanism. Print instructions I wasn't happy with the existing drybox offerings I…
Wydruk około 3,08 €–3,76 € nettoWstępna wycena jednego wariantu
This connector fits into the opening of the Polymaker PolyDryer dryboxes and attaches to the smaller 4mm PTFE tubes. This is useful for boxes that are equipped with an auto-rewinder spool and ensures the tubes are not pulled inside (this…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
This simple mount allows you to hang your drybox from the underside of a shelf or enclosure. Print instructions .2 mm layer height 3 or more perimeter walls This is a remix of this thing on Thingiverse by customyota . Mine has a tighter…
Wydruk około 2,23 €–2,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These Saddles (regular and short versions) replace the rollers in @GunplaMark 's The Ultimate Cereal Container Filament Drybox - Official Remix to work with my Auto-Rewinder for Ultimate Filament Drybox to eliminate problems with tangled…
Wydruk około 1,53 €–1,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an Optional add-on to the (Un)original Prusa Drybox. Simple rollers, using 608 bearings, that fit with the 18mm aluminium rods of the Drybox. Note : All the files are also available for 20mm rods as an option. The filename…
Wydruk około 4,45 €–5,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix based on the Complete IKEA Drybox Solution idea from crashdebug on thingiverse with some element ideas from Mihai's DryBox on thangs. All parts but roller_mount_inside and roller_mount_outside are done from scratch in…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Stable box for the desiccant which goes under the spoolholders of the ikea drybox (Samla, 22L). https://www.printables.com/de/model/98008-drybox-for-4-spools-ikea-samla-22l-based/files
Wydruk około 4,98 €–6,08 € nettoWstępna wycena jednego wariantu
Summary Comfortably connect a drybox to a MMU inside of a 3D printer enclosure. Each PTFE tube can easily be identified by a number tag and can carry a color tag that can be taken from the tube end and be placed onto your MMU slot to…
Wydruk około 9,69 €–11,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
*** Update: 9-10-2020 Some of my thin spools I had from Proto Pasta, and Spider Maker were offset from center and caused a few issues. So I made a quick spacer that can slide onto the axle and move thinner spools closer to the center of…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
I wanted to have a passtrough for the DryBox and add a nut holder for the middle screws. I used Passthrough_Cover.stl for the hole dimensions to get the fit just right. From the other files I got the dimensions for positions of holes and…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Overview For a video tour of this tower setup, please visit this reddit post . In this video I explain how this quick-release system works along with some of the other upgrades that I have made for my Prusa i3MK3S+ with MMU3! (: This new…
Wydruk około 2,74 €–3,35 € nettoWstępna wycena jednego wariantu
This desiccant block fits the rubbermaid 21 cup containers. It has strong walls so it can support 1 Kg spools easily. Print Instructions: YOU MUST FOLLOW THE PRINT INSTRUCTIONS!!! Print using ZERO top and bottom layers (REQUIRED.) Use 45…
Wydruk około 4,59 €–5,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
About Round Multibox 3.4L (EAN 8694064003156, produced in Turkey) with internal diameter of 22cm can be used as dry box for storing a spool of filament. It lacks seal and is made from elastic plastic so it needs tightening - that's why I…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This simple mount allows you to hang your drybox from the side of a wall, shelf or enclosure. Very useful for an Ikea LACK Enclosure . That can only fit 4 of these mounts inside . Print instructions .2 mm layer height 3 or more perimeter…
Wydruk około 3,87 €–4,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of The Ultimate Cereal Container Filament Drybox . I split the base in half, so now it is possible to print it on my Bambu Lab A1 mini printer. I also moved the haunches by 6 mm so it fits my cereal box I purchased, but it…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
When I had to take the silica out to dry, part of it was always stuck under the seal. So I designed a tray to make it easier to handle the silica. At first I planned a more robust one, but I was reluctant to use so much filament on it, so…
Wydruk około 2,36 €–2,89 € nettoWstępna wycena jednego wariantu
These Swatches do fit in the Drybox Lid holder by Archangel91. I remixed the Swatch Card from Adam Starbuck. Thanks for those Templates. I do not use s Swatchbox at this time, so there is none available yet, but I am in the Process of…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
For my Ikea drybox mount I needed a filament pass through for PC4-M10 fittings which don't stick out of the drybox. So I made this model for the 10,6L size Ikea 365+ container for two filament spools. Printed in PLA with 0,2mm quality…
Wydruk około 1,16 €–1,41 € nettoWstępna wycena jednego wariantu
Materials 4x countersink M3 bolts 4x M3 nuts 4mm teflon tube (optional) 2x 4x2mm magnets (optional) M3 set screw Assembly mark and drill holes for the M3 bolts into the drybox wall insert the M3 nuts into the inner bushing insert one of…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Halterung für einen Feuchtesensor (&Temperatur) von Bresser (45x58mm). Zur Befestigung habe ich Inserts in M3 hinzugefügt.
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
This is a simple mod on the spool auto-rewind adapter for the (un)original Prusa drybox. I just squeezed the hole diameter down a bit so the PTFE tube cannot exit the top.
Wydruk około 1,18 €–1,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 05/23/2024: Now that Frantisek23 has further perfected his design , I definitely recommend his new solution and basically declare my remix obsolete. Since the EndRib_V1b Mini.stl model is no longer available from him in the course…
Wydruk około 1,33 €–1,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of @MysteryDough_5648 Filament Spool Stand to suit my needs (and maybe yours). Thankfully the original creator posted the .step file which allowed for easy remixing. The Rubbermaid 21 Cup container makes a good dry box. I…
Wydruk około 5,91 €–7,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a drybox for my XL 5H, that I can directly print out of. I found the “SmartStore Classic 45L” container from Orthex in my local hardware store (Bauhaus) and it matched the dimensions to hold 5 spools side by side. I designed this…
Wydruk około 2,60 €–3,18 € nettoWstępna wycena jednego wariantu
Unofficial Drybox - Modified B-Pillar with wall mount feature
Wydruk około 8,24 €–10,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Keeping hygroscopic filaments dry is mandatory for good prints, so I was looking for a solution to print from a drybox. At first I bought a very large airtight storage box for various spools and printed from there, but for several reasons…
Wydruk około 2,27 €–2,77 € nettoWstępna wycena jednego wariantu
It is the Same as the original, but with 1mm more clearance at the joining parts, what makes this easyier to connect.
Wydruk około 5,94 €–7,26 € nettoWstępna wycena jednego wariantu
This version of the spool holder is WITH hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Blog article: Drybox build instructions .
UPDATE 1.02.2024: Lids with Bambu-Logo handle for small and big AMS dryer pods The perfect-fit funnels for big and small silica buckets I think the silica boxes in AMS are simply brilliant, so the filaments can stay in AMS for a long time…
As of now, the (Un)original Dryer D2 is available. It is an improved version of this drybox, with many new features. Now supporting modular heating, filament weighing, and is much easier to assemble! Check it out here: The (Un)original…
This version is WITHOUT hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Article with build instructions:…
NOTE: While still in use by a lot of people, this version of the drybox system has been deprecated in favor of the updated one here: My previous filament drybox model became more popular than I ever imagined, and after taking on a lot of…
My Ultimate Cereal Container Filament Drybox has been out in the wild for a few months, and after some great feedback from all of you and continued use in my setup, I've decided to make a few official changes. The biggest change is a…
Article with build instructions: https://blog.prusaprinters.org/dryboxes-and-alternative-spool-holders-not-only-for-multimaterial-upgrade/ Material: Prusament PLA Galaxy Black
Description These models are made to enhance your Prusa USS Drybox experience, bringing additional compatibility and expanding the range of options. Before you start, read the article, which contains all the important info. What can you…
Next remix of Drybox for Prusa Printer Enclosure V2 - with humidity sensor. Print instructions You can place five pieces of this drybox on the top of the Prusa Printer Enclosure V2. Can be used as a standalone spool holder for Original…
I wanted a Drybox that is as affordable as possible without compromising on features! There are already many designs out there that use the well-known cereal box as a basis, but none of them met all my criteria. I wanted to change that.…
This is an upgrade for users of MMU and who has (un)original drybox (also works with the Slim version). This system replaces the filament buffers. It's a project in development that I try to improve with the time, thanks for your…
Update 2/19/2023: Added no-water-drops design for Top and the Default Jar Size per user comment/request (top/bottom text remains). Update 2/7/2023: Added a 12 mm-shorter version per user request. This model is designed to make storing and…
Why Yet Another Drybox Design? I was looking for a storage solution for my filament, but the popular designs I found weren't right for me in terms of size or didn't meet all of my needs. I finally found some storage containers on Amazon…
Edit: I also tried a different approach here: Let's build...Drybox v2! by Ren | Download free STL model | Printables.com You can find many single parts, videos or blog posts regarding dryboxes. When I realized I have stringing problems…
Using Remix as a reference, I created a model that does not require additional parts such as bearings, bolts, or shafts, and can be produced using only a dry box, PTFE tube, and a 3D printer. Requires 4x: 608 bearings 1x: PTFE tube Φ4mm…
It is designed to fit perfectly into the right-side recess (where the spoolholder is located). This DryBox enables you to store your filament spools in a more controlled environment - don't forget to add silica gel into the DryBox for it…
English I originally published this drybox on thingiverse (thing nr. 3884699). It became quiet popular, so I decided to publish it here again (I will no longer publish any designs on thingiverse). If you need changes like e.g. equal…
I was thinking quite hard how to fix the issue some experienced, that not all types of spools slide nicely. I had the solution right in my hands all that time, I just didn't realize it before! Let's finally use all these old pieces of…
This is a simple solution for a drybox filament feeder using the PC4-M6 bowden tube coupler. For assembly only a single 8mm hole is needed in your drybox for the filament feeder to pass through. Assembly of these parts does not requires…
I wanted an airtight PC4 feedthrough for my drybox, so i took some insperation from the RoboMagus solution and iterated to this solution. The cap is capable of sealing the whole feedthrough airtight, when it is not in use. I also added a…
As of now, the (Un)original Dryer D2 is available. It is an improved version of this drybox, with many new features. Now supporting modular heating, filament weighing, and is much easier to assemble! Check it out here: Disclaimer: This…
Stackable Ikea Samla Drybox and Spoolholder. You have an option of printing either just drybox for 2 spools, or spoolholder for three spools, or both. Dybox was able to maintain 16%-18% humidity in environment with in between 45% to 92%…
I've designed this drybox for the Prusa XL, of course it can be attached anywhere on 3030 aluminum extrusions. The drybox is opened via the red wheel with a 90° turn. It also holds the container for the desiccant, which could not be…
One of the biggest drawbacks of the CC2 is its open spool mount design. While the community has already created some great solutions, I felt there was room for a more modular approach; one that doesn’t rely heavily on additional…
Update (27 March 2025) - Uploaded a new thread only (no sides) universal spool holder axel at a user's request. This allows you to use two female ends and adjust to any size needed. See the "Drybox Axel - 50mm Universal Threaded (Male,…
In order to change the filament quicker and more comfortable I made some small and easy to install parts in Fusion 360. With this you can change from one colour to to another by simply changing the PTFE tube adapter and close the box with…
This is the version of the drybox feeder insert for using PC4-M10 fitting with the M10 x 0.9 thread. For the PC4-M6 version get the original design by RoboMagus (linked below). This pass-through adapter for a makeshift drybox solves…
This is a simple humidity sensor mount for your filament drybox. I've created this to fit the IKEA samla boxes, but should work fine with any transparant storage box. It is designed around those cheap circular LCD temperature / humidity…
Made a filament sensor bracket so I can use my dryer box with the printer using M10 fitting. Added Supports arms to keep runout sensor in align. solve problem sensor would easily twist and turn and put filament in a bind. Print…
I thought that instead of buying an additional box, you could simply print a better one yourself! My box is not only compatible with the Polydryer, unlike the original box it is also stackable, has an improved closure, a slot for labeled…
5 of six walls are already there, lets add one more. Dont forget to seal the corners an the hole on the printers frame. Silicone should be a good choice. Also available : -a ring to stick a led strip on. For lighting the spool from…
The Ultimative Filament Drybox Introduction So... I saw those filament dryboxes. Of course I'd wanted to design one by myself so badly… And here it is! Let me introduce an overengineered but cool looking drybox spool stand! Does it print…
For printing with highly-hygroscopic materials such as water-soluble supports or just for regular printing of PETG or ABS exposed to moisture, a drybox is a key way to prevent fast deterioration of materials. For the instructions on the…
This a is a work in progress To Do: • Push-to-connect fitting threads are difficult to align and thread when printed at an angle. May depend on your printer. Changelog: 2019-08-30 : Fixed 5/16" threads on printed nuts 2019-09-01 :…
Heat or glue here as it will pull out if left in place.
This is a slight modification of a great Drybox made by Dynarun to add a hygrometer in the front. You could also use my universal drybox plug to make it airtight when not in use. Required Parts Print basis.stl from this project, and all…
You need for one outlet: 2EA M3x4x5 threaded brass inserts 2EA M3x10 Cylinderhead screw 1EA M10 PTFE Tube fitting
This enables you to use the Prusa Dryboxes (not Wall-Mounted version) with a PTFE-Tubing clamp. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox using the same screws (M3…
the step file of (Un)original Prusa Drybox created by @BramElema_470201
A remix of Twotone74 drybox for the Ikea 365+ with equal rollers and a larger silica box/tray to put even more silica. As in the original model the max diameter of the spool is 200mm. Bill of Material: 8x 608 ballbearings (the one in the…
This is an insert for the Ikea Samla 22L drybox to improve filament spool storage (not designed to print out of the box). The insert prevents the spools from rolling around and sitting directly in the desiccant (and therefore pulling…
With this upgrade you can keep your filaments dry and organized in a very small footprint. You do not need anymore the filament buffer. These designs should be compatible with all 200 mm Spools which has a round (Das Filament type) or…
Plug for securely holding the end of the filament spool when sealing the Polymaker Polydryer box opening. The plug does not protrude above the top edge when installed in the lid. Compatible with 1.75mm filament. The hole in the plug end…
4L filament drybox Background The idea was to create a drybox with as few modifications to the food container as needed where the spool can be changed with ease. Idea and Inspiration This is a collection of things I've found to work well…
I designed this drybox with optimal space usage and minimal printing volume in mind. It uses practically all the available space inside the Ikea container. It can hold larger filament spools than other Ikea 365+ dryboxes I have seen. It…
Fixation for (un)original Prusa drybox on the Prusa enclosure ( slim version available) You need some screw and nuts same one you use in a Prusa kit. 4x M3 nuts 8x M3x6 4x M3x12 -5 Spool rewinder adapter for MMU2S / MMU3 in (un)original…
These are dual-purpose adapter sleeves that: Allow you to use third-party filament spools in your Prusa USS Drybox without them dragging on their rim Provide a reusable carrier for mounting Prusa's OpenPrintTag NFC tags on third-party…
Several 3d printing filaments are hygroscopic, meaning they absorb moisture from the surroundings which can lead to poor surface finish and a clogged nozzle. Depending on where you live and what material you are printing with, moisture…
I like Ikea 365+ box because it's sealed but I also like autorewinders for MMU2, then here is my mashup. Up to 2 spools, max 63mm width, can be used simultaneously and if no springs are used into hub...this can be used as a normal spool…
This is a remix of this model by crashdebug from thingiverse. I changed the inside roller mountings to 10mm diameter to fit 10mm aluminium rods instead of M8 threaded rods and constructed new outlets with only 3 screws and PC4-M10…
Fully Printable Dry Box Spool Holder and Container (v3.0) I hope you enjoy printing and using this DryBox as much as i enjoyed designing it Features Fully printable on a Prusa MK4 Mountable on top OR inside the Original Prusa Enclosure…
A filament box based on the familiar hexagon style but redesigned for the integrated auto-rewind spool holder v5.6. by Vincent Groenhuis. This box fits the 75mm version. I designed this for my MMU2S to remove the buffer and keep all…
I originally wanted a 2kg spool version of the Spannerhands spool holder. After editing the original stls, I noticed that due to the increased dimensions the print was sagging. Therefore I rebuilt the original design, increasing stiffness…
I wanted a drybox that would keep my filament dry during the humid months and I really wanted to eliminate the MMU3 buffer that takes up tons of space and keeps feet of filament constantly exposed to the humidity. After researching this,…
The Shark filament dry box system has been through many iterations, and is finally at a a stage I'd say is “finished”. It's named because of the shark fin shaped filament guide that makes it possible to load filament easily. The main…
>Version for 1 Spool< >Version for 3 Spools< IKEA 365+ 10,6l Drybox Spoolholder for 2 Spool, with space for Silica / Desiccant and a Xiaomi Miija Bluetooth Thermometer. Update 2024-04-01 Added a splitted in 2 parts version for smaller…
I removed the back of the box to make space for the large Prusament spools. There is a groove for some silikone sealing buyable at amazon: https://amzn.eu/d/89xxlku and https://amzn.eu/d/72q73KV I also added some slots for better…
I wanted the silica gel container from one design and the adjustable dual spool holder from the other, so I mixed the two excellent designs linked below. Modifications Modified the silica gel container to be the spacer for the spool…
Silica beads holder/basket meant to replace the little bag that came with the USS Drybox. PARTS: Main body Lid Stand (to easily pour silica beads in the basket) Strips and arrow (if you don't have multicolor printer: meant to be printed…
I made this to feed the filament up from below an IKEA Lack Enclosure and hopefully keep the filament dry. It also works to feed it top down by rotating the PTFE coupler 180°. I startet out by remixing the Parametric Enclosed Stackable…
![Extended PTFE (PC4-M10) Quick-Fitting Mod for Prusa Drybox [V3]](https://media.printables.com/media/prints/31696/images/745620_40034652-a998-4c43-983c-424bf857ea6d/img_4234.jpg)
