P
PrintablesMaslovyRohlik
Compatible with Fujifilm DE100 and DE100-XD Photo Printers
sliced to fit on mk4s bed
Wydruk około 2,19 €–2,68 € nettoWstępna wycena jednego wariantu
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
Wyniki wyszukiwania: e100
Liczymy pasujące modele…
P
PrintablesJerryie
E100 German WWII super heavy tank
E-100 Tank Model 1:72 This model represents the German E-100 super-heavy tank with several build options: Tracks & Skirts No-skirts version : tracks are attached using 4 connectors . Full-skirts version : tracks already have built-in…
- Pobrania
- 759
- Polubienia
- 179
- Ocena
- 5
P
Printablesmilanvdzanden
Waffentrager E100
This is a model of the tank G98_Waffentrager_E100. maybe you ned to scale it up Print Settings Printer Brand: RepRap Printer: Prusa i3 Supports: Yes Resolution: 0.1 Infill: 30% Category: Vehicles
- Pobrania
- 534
- Polubienia
- 24
- Ocena
- 0
P
PrintablesChargedCapacitor
Hifiman HE Stand for Arya, HE1000, and Jade series headphones with Dekoni pads
Hifiman HE Stand for Arya, HE1000, and Jade series headphones. This model works best when the larger Dekoni pads are installed, as the original pads are slightly thinner.
- Pobrania
- 374
- Polubienia
- 21
- Ocena
- 5
P
PrintablesCatharsis69
Panzerkampfwagen E100
Geetech PLA Matte Grau BambuLab X1C Mit Supports
- Pobrania
- 316
- Polubienia
- 35
- Ocena
- 4
P
PrintablesCastIronFace
DeWalt compact blower snorkel (DCE100)
I love my little blower for getting rid of sawdust from the garage, but the inlet is on the left side and is always getting stuck on my shirt. I'm sure that I am losing a little efficiency with this, but it still works for my needs. Print…
- Pobrania
- 246
- Polubienia
- 34
- Ocena
- 5
P
PrintablesSensha_Vor
E100 (World Of Tanks Ver)
Printed using ESun PLA+ Grey and Black Most parts needs supports (Both Tree and Standard) Super glue is required as well Raw un-melted filament for the gun movement Did some experimentations regarding the tracks and integration of…
- Pobrania
- 223
- Polubienia
- 42
- Ocena
- 0
P
PrintablesNora
E100 Easy Print
Easy print E-100 Scale 1/100 (Required some glue and sanding) The Panzerkampfwagen E-100 (Gerät 383) (TG-01) was a German super-heavy tank design developed towards the end of World War II . It was the largest of the Entwicklung series of…
- Pobrania
- 217
- Polubienia
- 41
- Ocena
- 5
P
PrintablesTom Brazier
VDE100 rotary extruder
See the youtube video for details. The extruder requires three or six MF85ZZ flanged bearings and three or six countersunk M3 screws. The flanges on the bearings need to be ground to 9.1mm diameter edges. Alternatively, pick your own…
- Pobrania
- 214
- Polubienia
- 40
- Ocena
- 0
P
PrintablesSensha_Vor
E100 (War Thunder Ver)
Printed using ESun PLA+ Grey and Black Most parts needs supports (Both Tree and Standard) Super glue is required as well Raw un-melted filament for the gun movement Did some experimentations regarding the tracks and integration of…
- Pobrania
- 203
- Polubienia
- 40
- Ocena
- 0
P
PrintablesDuncan Meyer
the100 "3-Way 235 Mod" by Duncan
NB This is a WIP Background: Modern 3D printers are printing FAST nowdays. But you don't have to spend a fortune on a Bamboo Labs top of the line printer. Believe it or not, if you have a printer with a 235x235 bed (like an Ender 3) you…
- Pobrania
- 172
- Polubienia
- 47
- Ocena
- 0
P
PrintablesFunkyskull
PCB Klicky Mounts for The100 v1.1
Custom PCB Klicky Mounts for the ‘The100 v1.1’ printer. The100 v1.1 printer PCB Klicky Probe Mount the100_pcb_klicky_connector_plate.stl Designed to replace stock Connector Plate.stl on the toolhead. Places the PCB klicky probe inline…
- Pobrania
- 116
- Polubienia
- 18
- Ocena
- 5
P
PrintablesTravockMD
Tuya Zigbee temperature humidity sensor stand (MIR-TE100-TY / TS0201)
The stand provided with the Tuya Zigbee temperature and humidity sensor was wobbly and in an angle. I prefer a more sturdy and vertical stand. I spent some time in Fusion360 and came up with this stand. Posting a make and liking the model…
- Pobrania
- 105
- Polubienia
- 17
- Ocena
- 5
P
PrintablesDanMaster
The100 BTT Pad 7 mount
I designed a mount for the BTT Pad 7 to connect direct to the bottom Frame for THE100 printer from MatThePrintingNerd
- Pobrania
- 104
- Polubienia
- 12
- Ocena
- 0
P
PrintablesAlvomane
Tuya temp/humidity sensor compatible back plates / Befestigungsplatte (Zigbee Model TS0201 / MIR-TE100-TY)
Since the adhesive version of the back plate of the Tuya temperature / humidity sensor (zigbee model TS0201 / MIR-TE100-TY) did not seem optimal in many places, I designed a compatible spare part for the back plate and based on this a…
- Pobrania
- 99
- Polubienia
- 14
- Ocena
- 5
P
PrintablesMichael Schmitt
4 Rod Bed Mod for The100 V1.1
0.2mm 25% Infill PLA Rod Length 224,5-225mm
- Pobrania
- 91
- Polubienia
- 14
- Ocena
- 0
P
PrintablesSensha_Vor
Jagdpanzer E100
Printed using ESun PLA+ Grey and Black Most parts needs supports (Both Tree and Standard) Super glue is required as well Raw un-melted filament for the gun movement Did some experimentations regarding the tracks and integration of…
- Pobrania
- 86
- Polubienia
- 28
- Ocena
- 0
P
PrintablesUnitaz_38
E100 late turret 150 mm gun
late e100 turret with 150 mm gun
- Pobrania
- 86
- Polubienia
- 7
- Ocena
- 0
P
PrintablesAndrew Rousseau
Inlet guard for DeWalt DCE100 blower
I found upon first use that this blower is only really good for left handed use. When using right handed the inlet keeps getting plugged with my pants. This is a bit over kill to make sure your clothing will not obstruct the air flow but…
- Pobrania
- 84
- Polubienia
- 16
- Ocena
- 0
P
Printables2B-3D
THE100 (v1.0) Ender 3 bed mod - Remix
When building a the100 printer, I had issue finding an Ender 2 bed or similar, so when I found a very cheap Ender 3 one I decided to install it based on the mod by overgo. I had to make some changes: my the100 version has only two rods in…
- Pobrania
- 77
- Polubienia
- 20
- Ocena
- 5
P
PrintablesDockGuy
Craftsman air compressor gaskets (E100959) in TPU
Why: I picked up a Craftsman air compressor model 921.152101 for free - it ran but wouldn't build pressure past 40psi. Upon disassembly, I discovered blown pump gaskets. Why buy when you can make? So, I whipped these up in CAD (15…
- Pobrania
- 76
- Polubienia
- 17
- Ocena
- 0
P
PrintablesHabag111
Plug mount with cover - for The100 v1.1
[THIS IS A WORK IN PROGRESS.] COMPATIBLE WITH THE VERSION 1.1 OF THE 100 ONLY!!! I made this because the other plug box on printables interferes with the PSU if you use a PSU tray. It also wasn't covering the back of the socket that has…
- Pobrania
- 76
- Polubienia
- 15
- Ocena
- 0
P
Printablescartyski
OPENSESAME1000 - Jar Tool
Ideal for smaller jars or bottles, these compact versions offer the same convenience and ease of use. PETG or TPU are recommended for optimal performance. Note: PLA is not recommended for the OPENSESAME1000 due to slight splitting issues…
- Pobrania
- 73
- Polubienia
- 15
- Ocena
- 0
P
PrintablesJazzy Justin
ADXL345 Accelerometer Mount for The100 V1.1
Adapter to mount an ADXL345 on top of the 100's toolhead. Uses existing holes atop the hotend shroud. Designed for this (very common) version of the ADXL345 ADXL345 Accelerometer: https://a.co/d/79bJakJ (The wires it comes with aren't…
- Pobrania
- 70
- Polubienia
- 9
- Ocena
- 5
P
PrintablesSirMcstoney
Power Supply Tray and Cable Holder The100
I added the cable holder to be a part of the tray since I did not have a way to screw it into the power supply. I also shortened the cable holder box by 20mm so it would not block the Pico at all. I did this in tinkercad and am not great…
- Pobrania
- 68
- Polubienia
- 14
- Ocena
- 0
P
PrintablesMatthias Faist
The100 Toolhead on Ender 3 (v2)
i designed an adapter plate to mount the The100 Toolhead to my Ender 3 V2 to be able to test the CHC Pro Hotend, but you could also mount different V6 style hotends its also i great possibility to have good (way too much) cooling on the…
- Pobrania
- 67
- Polubienia
- 14
- Ocena
- 3
P
Printablesmaarten
The100 printable printer power socket
Print it on its back and you only need supports for the bracket for two of the tree models. Printer settings are the settings as used in the entire The100 project (see git of the project) Use same heat inserts as the entire project attach…
- Pobrania
- 52
- Polubienia
- 13
- Ocena
- 4,5
P
PrintablesFunkyskull
Carved and Pinned Gantry for The100 v1.1
In an effort to reduce weight I modified The100 gantry geometry by carving out excess material and replacing m5 bolts with 5x45mm pins. There are holes that can be used to remove pins if needed. Print Settings Designed to be printed with…
- Pobrania
- 48
- Polubienia
- 11
- Ocena
- 5
P
Printablesovergo
THE100 ender3 bed mod (WIP)
This is a work in progress I wanted to see if I could fit THE100 to fit an Ender3 bed. **still require testing** **part is not orientation optimization** and I didn't want to make the printer anymore bigger as in the picture, the color…
- Pobrania
- 45
- Polubienia
- 14
- Ocena
- 0
P
PrintablesAdamklosterman
VDE100 remix
work in process project added double bearing version that uses 6 MF85ZZ bearings drill shaft jig to hold shaft from turning in lathe.
- Pobrania
- 45
- Polubienia
- 6
- Ocena
- 0
P
Printablesjacob goforth
Electronics Tray for The100 Tank
This is designed to mount inside The100 Tank edition frame, and has mounting for BTT Octopus, Raspberry Pi Zero, and power supply. Just use longer screws and nuts where possible to mount the tray to the inside of The100's frame. You may…
- Pobrania
- 41
- Polubienia
- 12
- Ocena
- 0
P
PrintablesSherlock_Ohms
Air Cover Cover Replacement Knobs for John Deer E100 Series Mower
Print in this orientation, with supports and with 3 perimeters.
- Pobrania
- 40
- Polubienia
- 7
- Ocena
- 0
P
PrintablesFreckles667
Jagdpanzer E100 Bag tag
This is a very simple change that allows a string to be added so this tank can be a keychain or bag tag. It is also scaled down, a lot. I printed it with a 0.2mm nozzle and 0.08 mm resolution and it works, but it is very delicate, I…
- Pobrania
- 39
- Polubienia
- 3
- Ocena
- 0
P
Printablesthatguyisjames
The100 HGX-Lite (Sherpa Mini) Mount
My normal bowden connector kept slipping out of the hole on my HGX-Lite. Made a mount that holds the extruder (upside down) and uses a more securely held M10 bowden connector. The larger M10 style is needed, as the tube passing though and…
- Pobrania
- 39
- Polubienia
- 8
- Ocena
- 0
P
PrintablesMaxResStudios
Fujifilm DE100 Print Catcher
Compatible with Fujifilm DE100 and DE100-XD Photo Printers Can be printed on Bambu Labs printers (barely) with build volume of 256x256x256 or larger. If printed on a CREALITY K2 PLUS or PRUSA XL (350x350x350 or larger), the build volume…
- Pobrania
- 36
- Polubienia
- 5
- Ocena
- 5
P
Printablesthatguyisjames
The100 Hot and Spicy Motors
I wanted to make sure my motors did not get too hot in my frame. Decided against doing forced air. After talking with some members on the Discord we figured we might be able to fit everything without re-designing the back frame. I printed…
- Pobrania
- 31
- Polubienia
- 9
- Ocena
- 0
P
PrintablesBMsquared
Hifiman Egg-shaped Headphone Stand (HE1000/Arya/Edition XS)
I wanted to create a printable version of the included foam stand that Hifiman provides with their egg-shaped headphones. I traced the original foam and created a 3D model, added a little hanger for the headphone cable. Print settings:…
- Pobrania
- 28
- Polubienia
- 4
- Ocena
- 0
P
Printablesthatguyisjames
The100 Z-end stop using keyboard switch.
When finishing up my the100 build, I was not fond of how the Z homes itself using sensorless homing. I looked around and the only spare switch I had was a Kailh Choc V2 from a previous keyboard project. I used a blue key switch so I can…
- Pobrania
- 26
- Polubienia
- 4
- Ocena
- 0
P
PrintablesSnafky
Enclosure addon Honeywell Heater HCE100XE / HCE100BE4 mounting clamp
I designed this thing to clamp a small personal heater on the upper part of my enclosure (lack). I normally let this heater warm up the chamber and than switch the active heating off as the printer produces enough heath to sustain the…
- Pobrania
- 25
- Polubienia
- 2
- Ocena
- 0
P
PrintablesAbeFM
Oculus Quest 2 Elite Strap Battery Box for Anker PowerCore10000
This holds an Anker PowerCore10000 power bank onto the collection of Elite Strap clones here for the Oculus Quest 2. I found other solutions for holding the power bank too hard to use. I didn't have any good rubber bands, and wasn't about…
- Pobrania
- 24
- Polubienia
- 4
- Ocena
- 0
P
PrintablesSpegelius
XLite100 seat mount
I got one XLite100 with the first e-bike I bought (Nireeka Homie) and the light seems to work nicely. After getting another e-bike (Nireeka Prime), but this time without the backlight, I thought that it would be nice to swap the light…
- Pobrania
- 24
- Polubienia
- 1
- Ocena
- 0
P
PrintablesCord Bleibaum
4 Rod Bed Mod for The100 V1.1 - 200mm rod
Adjusted lower holders for 200mm rods
- Pobrania
- 22
- Polubienia
- 3
- Ocena
- 0
P
PrintablesChoumarin
Vertical / portrait stand for reTerminal E1002
The reTerminal E1002 only comes with a landscape / horizontal stand. This is a portrait/vertical stand for it. 2 versions, 10deg and 20deg Needs a short M3 screw
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 0
P
Printablesstenc55
MOOER PE100 stand
MOOER PE100 has stupid design that only allows it to be on the floor, otherwise you cannot see control board. In this stand it can be on the table.
- Pobrania
- 21
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPrivacyMode
Brother - P-Touch E100 Label Maker - Container - openGrid
Remix of a remix of a remix of an openGrid Brother P-touch label maker. Needs opengrid-multiconnect-directional-snap x2 opengrid-multiconnect x2
- Pobrania
- 20
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMuteKnee3D
Hypoallergenic Case Cover for Casio AE1200WH (Royale) and AE1000W + others
After years of wearing a Casio watch I've developed an allergy to the stainless steel caseback (Nickel) so I made this cover. The frame fits on over the stock caseback and holds a piece of adhesive vinyl (car wrap) to cover the back of…
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSirMcstoney
Plug and Swith Bracket The100
Needed a backet for the switch/plug that is common for most printers. This is a basic bracket that should hold a plug/switch. Mine is a Biqu 15A 250V off of amazon. I made it to go on the right side of the printer as I wanted it for easy…
- Pobrania
- 17
- Polubienia
- 6
- Ocena
- 3
P
PrintablesVlada Matena
Runride100 wheel
Requires one wheel and two inserts to be printed and glued into the wheel. Superglue worked for PETG prints. Printed using 15% honeycomb infill with 3 perimeters at 0.2 mm layer height using 0.4 mm nozzle. Printed on Prusa XL. In theory…
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
Printablesimaya
PSP 2000/3000/E1000 Dummy DC-In Jack
I wanted a clean solution to fill in the hole left by removing the DC-In jack in my PSP Street after doing a USB-C mod, so I made a quick model that just screws in where the original port went. Should also fit PSP-2000 and 3000 models…
- Pobrania
- 16
- Polubienia
- 1
- Ocena
- 0
P
Printablesblckbear
TRENDnet TE100-S5P+ Custom Housing
I have a TRENDnet TE100-S5P+ Ethernet Switch which has a broken housing, so I designed this minimal housing for it. I think this is way better than the original one as it has a regular shape which makes it easier to place. I'D RECOMMEND…
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
Printablesjnorre
Front enforcement for The100 printer
Enforcement part for "The100" v1.1 printer. I had trouble with the bed leveling being bad, even if I just leveled it just before I printed. After a lot of tries I finally realized, that the printer pressed apart the frame at the front as…
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 4
P
PrintablesIndi
VDE100 Bearing Grinder Jig For Dremel
The bearing grinder jig used to grind the bearings used in the VDE100 extruder. Remixed from Tom Brazier's tool to change the thread to fit my DREMEL 3000, though I believe most Dremels use the same thread (¾-12) so it likeley fits most…
- Pobrania
- 14
- Polubienia
- 3
- Ocena
- 0
P
Printablesthatguyisjames
The100 M4 extruder adapter
Found that my little extruder could not keep up with The100s speeds, I was getting skipped steps. Had a M4 Mobius kit, and figured I would give it a shot. I know the square nuts will not be as popular, but those are the bolts I had…
- Pobrania
- 14
- Polubienia
- 2
- Ocena
- 5
P
PrintablesJonathan Jessup
The100 T100 Serial Plate
I built a The100 printer, but couldn't find a model or template to use for my serial number plate. The .3mf file has a text layer to be edited with your own serial number, the backing plate is sized to affix on the Top Front Left frame.…
- Pobrania
- 13
- Polubienia
- 6
- Ocena
- 0
P
PrintablesDbrownlee
Linksys LNE100TX or HP5064-6057 half-height bracket
Better than no slot bracket, this one does a reasonable job of filling the empty space, in my old 486 machine.
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
Printables3DFreaky
Odys Neo e100 Bumm IQ-X E adapter
!Work in Progress! Adapter for the Busch & Müller Lumotec IQ-X E 150 Lux E-Bike light to fit onto the Odys Neo e100 e-scooter. v1 is simple and small but works perfectly. I'm working on v2 which will be more similar to the original light…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTobi
Lid for the Electronics Tray (The100 Tank)
Since I'm currently finishing off the building of my The100 tank 3D printer and using this electronic tray, I've designed this custom-fit cover/lid for it. This design ensures your electronics are protected from dust and debris . The…
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAPA 86
The100 MicroProbe Mount
This is a custom accessory designed for the THE100 3D printer . It consists of two parts: A spacer A MicroProbe mount The design is optimized to securely hold a MicroProbe sensor in place. It includes two slot for inserting a melting nut…
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesWitt
The100RiffMount
When going large scale diy 3d printer, the corexy style is not great because of the extremely long belts. Thats why I found the Riff buil very interesting. But i want to go fast and have great cooling. The Riff has the x motor mounted on…
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
PrintablesFated Filaments
Breathe100
This mod consists of a PLA bayonet style adapter as well as two TPU 95A gaskets, and another TPU cover that replaces the original fabric. One gasket replaces the original filters, while the smaller one seals between the adapter and the…
- Pobrania
- 6
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMichal Wittmayer
Better PSU holder for THE100 extended
My printing parameters were, 15% cross hatch, 3 walls, 4 bottom and top layers. For the orientation, print it with the lip facing upwards. PETG is the best for this, but PLA is usable too If you want to prevent the PSU from sliding out,…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesWinters
PSP E100X (Street) Type-C Mod
Hey everyone, it's my first model ever, so don't be harsh on me. The housing requires some extra filing to fit a type-c connector. The shell of your PSP street should also be trimmed down a bit. Quick tutorial: •Print the housing; •Take…
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
P
PrintablesYotam Baeloha
GL.iNet Slate 7 Pro (GL-BE10000) Open-Back Wall Mount + Spacers
An open-back wall mount adapted for the GL.iNet Slate 7 Pro (GL-BE10000) , developed through measurements, fit tests and several printed revisions. The goal was a secure fit, accessible ports and plenty of open space behind the router’s…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
Lid for the Electronics Tray (The100 Tank)
Since I'm currently finishing off the building of my The100 tank 3D printer and using this electronic tray, I've designed this custom-fit cover/lid for it. This design ensures your electronics are protected from dust and debris . The…
P
Printables
Vertical / portrait stand for reTerminal E1002
The reTerminal E1002 only comes with a landscape / horizontal stand. This is a portrait/vertical stand for it. 2 versions, 10deg and 20deg Needs a short M3 screw
P
Printables
E100 Easy Print
Easy print E-100 Scale 1/100 (Required some glue and sanding) The Panzerkampfwagen E-100 (Gerät 383) (TG-01) was a German super-heavy tank design developed towards the end of World War II . It was the largest of the Entwicklung series of…