1651 modeli
Enclosure for raspberry pi zero with HQ camera (flex cable inside). Feel free to adapt the model to your needs. The image quality of the camera is beautiful, and I'm happy with the result. I found a project called ShowMeWebcam, which…
Most monitor mounted webcams only allow tilting up and down. I have two monitors side-by-side, and the ideal camera angle requires the camera to pan to one side for a more direct angle. I wanted a solution that was simple and…
This is another option to mount a webcam to your Artillery Sidewinder X1 or X2. The two parts are very easy to print. I also designed a more advanced version. The my other design . And another streamlined variant, more stable and not as…
I found that when deciding on a camera mount, I didn't really need the ability to rotate my camera left and right, but if I was printing something tall, I'd just need to be able to tilt my camera up. So I came up with this simple…
Wanted a cover for my C610 that just worked. Designed this in Fusion 360 and it works great! The thin ring front means you can see the LEDs on the camera when they're on whether the cover is opened or closed. This uses a print-in-place…
Webcam Step: Elevate Your View Modern technology has gifted us with sleek, thin-framed monitors. While these technological marvels enhance our workspaces, they also present a new set of first-world problems: webcams dangling into the…
There are many webcam mounts available - unfortunately, I couldn't find one to raise a Logitech Brio 105 on my DELL U2722DE - so I measured and constructed my own :) I printed sideways with supports, see pictures
This is a Model allows for the Webcam to be attached by use of a 1/4" x 3/4" Stainless Steel Hex Bolt. Rather than disassembling the Webcams to attach it to the mount. It attaches using a friction clip attaching to the Z roller Motor…
Print the mount in upward position. So there should be no issues.
The cover slides easily on and off the lens. The scad file is configurable in terms of spacing. I also added my own kind of elephant foot compensation because it often affects more than one layer and it really hinders the sliding…
I needed a webcam and had a Raspberry Pi Zero and a couple of camera modules. Using "Show-me Webcam" you can covert a PiZero into a USB webcam. Hardware Raspberry Pi Zero ≥64MB SD Card ZeroCam FishEye…
Use file servo-to-print. Web-cam-servo is for reference to see how to mount your servos. I can also share the pi case, but it's pretty basic.
I remixed a webcam mount that was intended for tripod-mountable cameras and made it suitable for use with clip-on webcams. I basically just flipped the webcame platform vertical and removed the tripod hole, since it is now unnecessary.…
This is a remix of my previously posted print Privacy Cover for the Logitech C610 Webcam that adds an eye when the cover is open for a constant reminder that one could be being watched. Print instructions Load Galaxy Black in spool #2,…
The rotating vise can hold webcams with a maxiaml width of 9cm. You can print it out in two ways. If you choose you want the mount for Ender 3 pro with an open (out) link then you have to print the rail mount with a close (in) link … then…
This mount allows to fix a Logitech cam or any webcam with a mount screw to a Dyson light allowing to position the webcam at the eyes level. This allows to get a professional look during visiocalls. The mount clips on the light and allow…
Only tested with the Logitech c270 HD webcam https://www.logitech.com/en-us/products/webcams/c270-hd-webcam.960-000694.html Just zip tie your camera on to the holder and clip it into your ceiling. easy, I have also included for your…
Logitech C902 Webcam Cover - Sleek and Functional Privacy Solution Protect your privacy in style with this custom-designed webcam cover for the Logitech C902. This 3D-printed accessory is the perfect blend of practicality and aesthetics,…
Magnetic Webcam Mount that sticks to one of the edges of the Core One (or any other magnetic Frame, i suppose). Up to 10 5x5mm Magnets can be used. (I used these: https://www.amazon.de/dp/B07N7PWY93 ) Should work with any Cam that has the…
Edit - I have added a slot in the face to make it easier to get the belt tensioner screw in. This is a remix of Man-in-Black's great design to fit my CR6-SE printer better. I incorporated a plate in the foot to replace the face plate that…
This is a support to mount the IMX258 10x85mm webcam to the Original Prusa Enclosure (OPE). Please note that there are other sizes of this camera on the market, but this model is only compatible with 10x85mm ones. For example, I suggest…
A compact vertical wall rack for five spincast combos. Alternate rods sit 120 mm higher on narrow pillars, so neighboring reels and cranks sit at different heights and don't collide. That lets five rods fit on a rack only 244 mm wide,…
Mount to install Microsoft Live VX2000 or Microsoft LifeCam Cinema in the PrusaBox made by https://www.printer-box.com This mount was created to get the possebility to use “old” Microsoft WebCams togehter with the [Prusa] Box. Needed…
A simple and strong clip on webcam mount for your Elegoo Neptune printer. Supported Printers (please compare the below image for other printers) Elegoo Neptune 3 Pro Elegoo Neptune 4 Elegoo Neptune 4 Pro The printer needs to look like…
Camera or webcam mounting screw based on the dimensions of a 1/4" - 20 UNC fitting. Designed to be easy to print, no supports needed and will print at 0.20mm with minimal retractions to help provide a cleaner print. The screw is based on…
I was inspired when I saw a similar design online but couldn't find an STL anywhere. I have a job interview today and wanted a way to act happily towards the camera while dealing with the anguish of making eye contact with an inanimate…
A simple but effective webcam mount designed specifically for the Ender-3 S1. Simply slides on to the X gantry, no tools or disassembly required. Also included is a threaded knob to match any webcam with a tripod mount (1/4-20 threads).…
UPDATE The camera mount was working but when there were fast short movements with many direction changes it started to wobble. I added a V2, it doesnt look as nice but it is more stable. If you are into timelapse videos then you…
I have taken ALL of the work out of mounting your Logitech C270 to your Ender 3 V3 SE X-axis. You don't need to do ANYTHING other than have this camera (or camera with similar mount), and this Ender, then just print. No hardware? No…
I designed my own webcam mount for my Ender 3 S1 Pro. I wanted the cam drive with the Z-Axis. You can use the holes for different positions and cams. I printed it in black Petg and its worked perferct for me . Hope you enjoy. Today…
This is my cover replacement for Logitech C270 Webcam. All you need to do is disassembly the original webcam and remove PCB electronics board. The board is fixed in the new housing using the original screws. Pros Click-clack system. No…
I created a stand for my Logitech C920 that resembles The Rocket Side Spool mount that I am using. It slides into the left side rails of my Ender 3 V2 (should also fit Ender 3/Ender 3 Pro) and has a hole that allows you to screw a 1/4-20…
This is a simple webcam cover. There are a lot of models on Thingiverse, but i just couldn't find one that printed well and that was usable, so I designed this one. It's easy to print at 0.2mm , works well, has enough surface to fix to…
Hi, this is a remix of https://www.printables.com/it/model/132242-zoom-phone-tripod/files for fit my webcam on an adjustable tripod. I've added a ¼" screw on the base. Just print 3 plain legs, 1 ring and 1 base infill 20-30% no support…
Z-axis Webcam Mount for the ELEGOO Neptune 4/Pro 3D Printers. Please use a Tripod Screw to mount the webcam.
Also required: CamScrew-10mm.stl screw made by @Vector3dArt to attach the webcam.
Updated 2023/11/06 - Added a versions to support a M6-1.00 x 10MM Hex Head Cap Screw Bolts This is a Remix of Tripod Base of the "Zoom Phone Tripod" to allow for the attachment of a 1/4" x 3/4" Stainless Steel Hex Bolt. I first tried the…
This is a Hot Shoe / Cold shoe mount to mount a webcam on top of a camera. ¼-20 thread tripod mount. I used this to mount my webcam for Octoprint on top of my DSLR I'm using for Octolapse within Octoprint. It's very light duty even when…
Simple easy to print webcam holder for Ender 3 v2. The camera and connection to the printer should fit snugly but not impossible to fit. I have created two models each with different properties. The Andersson mount is closer to the middle…
A Skadis Webcam Mount for webcams with ¼" UNC thread. Print the Screw with 0,1 mm Layerhight, without supports. The mounts are printed with 0,2mm Layerhight and supports.
This is a "Slide-to-open" friction-fit webcam cover for the Logitch c922 webcam. It prints in three pieces and "snaps" together. It does not require any glue or other adhesives. It is also sized so that it does not cover the blue…
This is a simple one piece webcam mount for any printer using 40mm box section frame. It has been tested on the Elegoo Neptune 3 Pro and works well for small webcams with tripod mounts such as the Logitech C615 No supports required. For…
I made a simple mount for a camera for the Elegoo Neptune 4 and Neptune 4 Pro. It slides into extrusion rails and uses an oversized screw to lock it in place. You will need a screw for the camera which you can find here…
Didn't seem to find a cover for the C920 so made one with inspiration from another user. Recommend using the improved version of the cover which fits better to the camera. Logitech C920 privacy cover improved by siamigo | Download free…
Eine Webcam Befestigung für die Logitech C270 Webcam. Es wird keine weitere Schraube benötigt! Erstellt für https://www.printables.com/de/model/3407-articulating-raspberry-pi-camera-mount-for-prusa-m Die auf den Bildern verwendete…
Based on the design (https://www.printables.com/de/model/392102-elegoo-neptune-3-webcam-mount) I made a mirrored version and made the contact surfaces a little thinner for a better fit. Fits the Elegoo Neptune 3 and 4 Series (incl. Pro /…
This is a remixed version of the great model made by SilentWoof on thingiverse with a few extra bits included. I've reshaped the main mount body to provide a cleaner look with less sharp corners. The optional ball joint is remixed from…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … I wanted to mount my webcam Logitech 920 to the Elegoo…
Nice and simple two-axis wall mount for old Logitech webcams for use with octoprint. 3M screws and 3m nuts are used to assemble the wall mount. It's screwed with standard 3,5mm wood screws to the wall. The camera plate is designed to be…
My Dell P2419HC monitor has a so thin bezel, that my C270 Logitech hides some parts of the display. This tool increase the space between the bezel and the webcam. Probably useable for many other monitors and other webcams. Use the 17mm…
Summary Simple and quick-to-print wall or ceiling mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use…
Webcam mount for playing tabletop games with my friends remotely. Uses the VESA mounts on the back of most monitors, has compatibility with 100mm or 75mm options. Webcam mount.stl" if you are able to use a screw to attach. The current…
This is a remix of the "Longer camera holder for FLSUN V400 v3" with an added m6 stud for camera mounts.
See the images for the exact model of webcam used unscrew the webcam from the base and screw it to the webcam mount using the included nut remixed from https://www.thingiverse.com/thing:5154496
This is a small and tiltable mount to mount a Camera to a Flatscreen monitor. The mount will fit monitors between 14.5 and ~40mm in thickness, as long as the top, front and back are relatively flat surfaces. The mount is just 40 mm wide,…
Since I don't have a Microsoft LiveCam 3000 HD and only a webcam with ISO 1222 / DIN 4503-1 / 1/4-inch camera thread. I couldn't help myself and built this model. It is further away from the print bed and elevated. Two different ISO 1222…
This is a hinged privacy shutter for a Logitech C615 webcam. The shutter can be raised when the camera is in use and lowered to ensure (visual) privacy when it is not. The mount features cutouts for the 'in use' LED and microphone, and…
gantry mounted webcam mount for elegoo neptune 4 plus. requires 2 m4 nuts, bolts and washers
This is a camera mount that attaches to the X-Axis of an Anycubic Kobra 2 series printer. This way the camera will always be at the same relative level with the print head. The mount is designed to be modular , allowing the usage of…
A simple Webcam holder with a arm for a Logitech C270 Webcam. Works with Original Prusa Mini, i3 MK3, MK4 and similar printers with standard aluminum extrusion profiles. You can Mix&Match the different arms, but i suggest to use the parts…
Webcam cover for your laptop or monitor. Slide it to the side to prevent being spies and slide it again to show your face to the rest of the meeting! If it isn't long enough, edit it and extend it so microphone or status led is shown. If…
We designed a camera mount for the FLSUN V400. There is a Version for the left and the right front profile. The mount can be simply clipped on the profile. Printed on the FLSUN V400! Find it in our shop here:…
I enjoyed this mount but wanted the camera a little further from the print bed. I elongated the arm by 60mm and then also lengthened the mount point so it can accommodate a thumb screw such as this After using this for a while I found…
Recreation of the left x axis cover with mounting point for a Logitech C270. Had to raise the height of the cover to get enough clearance for the cam. The screw from underneath is a bit fiddly to get in, but it works. I've included the…
after looking for several models on the internet of webcam holder and finding nothing. I came to the conclusion in modeling one. I printed it with plain PLA in about 70 min with my Flsun v400. I was inspired by this models:…
I could not find a good privacy cover for the Logitech C910 webcam, so I made my own. This thing is heavily influenced by the excellent C920 privacy cover by OnlyTono . The privacy cover consists of two pieces. The base goes on top of the…
This is a wall mount specifically designed for the Logitech C270 webcam (with the base removed), a replacement faceplate, and a focus ring to adjust the focus on the fly. The faceplate and focus ring are a remix for my specific use case.…
Webcam Halterung für die beispielsweise hier gezeigte Rollei R-Cam 100, die übrigens 100% kompatibel mit fluidd ist und problemlos auf Full-HD läuft. Optimal ausgerichtet zur Düse mit genauer Verfolgung schon von der ersten Schicht. Auch…
Webcam support for anycubic followed by Z. Simple installation and printing. You will need 2 m3*12 screws, and 6mm x 3mm magnets, or double-sided tape. 6mm x 3mm magnets https://amzn.to/48H9w1R m3*12 screws https://amzn.to/3TQ9C32 Low…
A quick remix of Rokkdaddys awesome mount to use almost every webcam. Just use the camscrew (printed) to mount the webcam onto the holder with the existing G1/4 thread (existing on most webcams). Prints without support. Attaches to the…
logitech c270 webcam mount vslot 2020
The original project by Max Braun available here used the casing from an Apple iSight webcam, removing the internal parts and replacing them with Raspberry Pi hardware. The software used is no longer operable with the latest Raspberry Pi…
2020 Aluextrusion Webcam Mount for AUKEY 1080p Webcam Since the Waveshare OV5648 are difficult or expensive to get, I drew a housing for a cheaper variant of a webcam. The AUKEY PC-LM1E 1080p Webcam is a cheap webcam that uses a…
No special printing directions other than make sure you print it flat side down and support inside the part where it friction fits onto the x axis rail. I printed the CamScrew-10mm.stl screw made by @Vector3dArt to attach the webcam.…
This is a small holder to fix webcam (or any other device with standard 1/4" tripod screw) atop of a BenQ ScreenBar. The webcam orientation is adjustable. No fastener needed.
I made remix of Logitech C270 webcam cover made by user Pomi. I wanted to use screws to secure the lid to the base and I also made some adjustments to clearances. You will need 2pcs of M3x8mm or M3x10mm screws for the lid. STEP files…
I needed an easy way to mount my webcam at a good height to monitor my prints. So I designed this simple stand to put the camera in a position that would allow a good view between the nozzle and the print bed of my Ender-3. The stand is…
This is a Model allows for the Webcam to be attached by use of a 1/4" x 3/4" Stainless Steel Hex Bolt. Rather than disassembling the Webcams to attach it to the mount. It attaches using a friction clip attaching to the Z roller Motor…
This mount utilizes the current M4*10 screws that are used to attached the Display Screen to the side of your printer. You can then add this mount, then attach your desired webcam to it with the ¼ inch screw included in the print.
A simple but effective webcam holder/clamp for webcam with screw. I made it in FreeCad. Print it in PLA or PETg It's a easy fit… and put some TPU on the bottom plate for grip. (So no tear down of you printer to add it to side rails.)
This bracket is designed to allow quick and easy install to hold your C920 webcam securely to your printer frame. The first .stl works well with an acrylic topped printer as it has a step in the base to accommodate the thickness of the…
Webcam holder for Ender 3, which is fixed to the X-axis stepper motor cover. In the plastic cover there is a small cutout on the bottom, where you mount this holder using the included clip. You will need one M3x12 (or longer) screw and…
Layer height: 4mm Infill: 10 (or 0) Support: no
This is a simple wall mount for any webcam with a 1/4 inch tripod hole. You can use a 1/4 inch screw (I used 11.5mm / around 0.5 inch in length) or print your own. Print the mount verticaly so no supports are needed Print Settings Printer…
Small clip to cover the webcam of the laptop for security when not using it, you can remove or slide it to a side to use the webcam. Print it over one side (see picture of the piece on the printer bed), so it will have some flexibility to…
Front and back plates for housing and partially enclosing Raspberry Pi Zero 2 with V3 and M12 cameras for plug and play webcam webcam software. Requires 12 x M2.5 nylon standoffs, 8 nuts and 8 screws. Check out the full tutorial and blog…
Eine einfache Halterung für die Logitech C920 Webcam am rechten Z-Motor des Prusa i3 MK3S. Zum Anschrauben an den Motor können die Originalschrauben verwendet werden. Die Schraube mit der die Webcam von unten an den Halter geschraubt…
UPDATE : Added extension STL in case you want to increase the height of the camera. UPDATE 2 : Added new v2 version which has a cutout for mag build plate which has a handle in front and it was hitting the original version. Plus it has…
My wife asked for something that allows her to block her 9315 XPS Webcam, and this was the result. It fits the laptop neatly, not too tightly, blocking the entire array of sensors at the top without interfering with the screen. I…
This adjustable mount lets you secure any webcam with a standard 1/4-20 mounting thread and the ability to pivot 90 degrees down, like this one . Print instructions Post-Printing Hardware needed: 2x M3x25 socket head screws 2x M3 hex nuts…
These remixes are based on these three things: Logitech C270 tripod, by luc_e, December 27, 2015 C270 Focus Ring - OpenSCAD included, by biomushroom, August 24, 2016 snapmaker base plate, by Okatake, February 12, 2018 (Note: I tried to…
I did not find a webcam mount that I liked, so I designed this holder for my Logitech Webcam. It fits on the printer without major modification. Bolts on using the hex M3 bolt on the x-axis end cover. Very simple installation and uses…
keebcu - andimoto7583 mechanical keyboard This is one of my keyboard designs I made with my keebcu keyboard customizer. It is a 75% mechanical keyboard which can be printed on smaller printers such as Prusa Mini. If you want to build the…
For users who got the Xiaomi Mi Light Bar, and, the Logitech C922 Webcam, this mount could be the best option. This mount can put the webcam directly on the light bar arm. The USB cable of the light bar can be arranged through the mount.…
Check out everything else I've 3D printed here https://www.samhillier.co/3d-print/ Lots of stuff I've not uploaded on here yet.
Just remove the pin and bushing, then replace the stock C270 clip with this part. Mounts in the top, front, center rail using two m3x8mm screws and two m3 t slot nuts.
Made this holder with fusion 360 for my Elegoo Neptune 4 Pro. If you don't know, you can use Crowsnest for webcam support on yours Neptoon 4. Clamps with double sided tape on the X axes gantry, if you have some improvments to add, please…
NOTE: Update available: Updated Generic Camera Arm for SV06 & SV06+ As this is my model, I'd like to point to you an improved version. This is a Remix allows for the Webcam to be attached by use of a 1/4" x 3/4" Stainless Steel Hex Bolt.…
A quick and dirty way to mount a 1/4-20 compatible webcam (Logitech C930 in my case) to your Prusa MINI. Print instructions Printed in PETG @ 0.2mm layer height. You'll need: 1/4-20 x 3/4" bolt to mount the camera to the arm. M3x10mm +…
I got a webcam cover and it was way to thick, when I closed my laptop it would bend the screen. So I designed my own. I wanted tot make it really, really thin but still strong and good quality. Hope you like it as much as I do. I used…
