Wyniki wyszukiwania: ebike

Sortowanie

302 modeli

P
PrintablesSimple3D

Bosch 36V Ebike Battery connector & DIY 2A Charger

I wanted to be able to charge my Bosch Powerpack 500 battery in my car when I'm on trips. Unfortunately the standard 4A Bosch charger pulls 170Watts which is more than my car's AC Inverter can support. I also tried to use my 300Watt Pure…

Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1143
Polubienia
62
Ocena
4,67
P
Printablesarminth

Wallmount / Wandhalterung Bosch eBike Battery Charger 4A BPC3400

This is a simple wallmount for the Bosch smart eBike system Battery Charger 4A BPC3400. No support needed, 25% infill. OpenSCAD file included as always. Have fun!

Pobrania
983
Polubienia
35
Ocena
4,8
P
PrintablesFuWeissinger

Bosch eBike charger holder BPC3400 4A

Hi there, I would like to share my first design for the BOSCH eBike Battery Charger BPC3400 4A Charger Model No: EB12.110.001 Have fun with it! I used 4x40 screws and 6 dowels When you screw it to the wall, don't overtighten!

Pobrania
979
Polubienia
64
Ocena
4,33
P
PrintablesErwin

eBike charger brackets (for Bosch, Brose, Qwik and Giant)

I created a bracket so I can easily fix our bike chargers on the wall in the garage: e-bike charger for a Brose motor (on a Spike Cycle) e-bike charger for a Bosch motor (performance Cx) e-bike charger for Qwic motor (FN7 urban bike)…

Pobrania
811
Polubienia
96
Ocena
4,44
P
Printablescmaddy

RadRunner eBike Thumb Throttle

This throttle wraps around the Rad Runner's rotating throttle and is secured in place with an M3 screw. There are ridges to help the band bite into the rubber throttle, but you can add rubber pads or a strip of neoprene or dip the band in…

Pobrania
793
Polubienia
47
Ocena
5
P
PrintablesSvw

Bosch eBike Charger Wallmount (added removable plug)

This print allows to elegantly mount your Bosch eBike Charger to the wall, out of the way, right where you need it. I made this version because several people indicated that they liked my eBike Charging Station but preferred a standalone…

Pobrania
563
Polubienia
107
Ocena
5
P
PrintablesFuWeissinger

CUBE eBike charging port cap

After a few charging processes, the cap of my CUBE eBike broke, so I decided to create a cover. This is almost a year ago, so it has had a long successful test run to confirm it works. I made an reprint out of plasticine, which served as…

Pobrania
556
Polubienia
28
Ocena
5
P
Printablesgoju

Wall mount for Bosch ebike Battery Charger 2A BPC3200

Compact wall mount for Bosch ebike battery charger 2A BPC3200 with holder for both plugs and routing of the power cable on the rear side. Due to the edge on the underside, the print is made at an angle, which leads to better layer guidance.

Pobrania
550
Polubienia
31
Ocena
5
P
PrintablesArminL

Pin Cover for Bosch Smart System eBike (BES3) Battery Connector or Charger

I was not able to find a pin cover for the battery connector of my eBike (Pedelec) to buy. There are models available for the earlier Bosch system, but I didn't find any for the (new) Bosch Smart System (BES3), hence I designed my own.…

Pobrania
500
Polubienia
37
Ocena
5
P
PrintablesSvw

Bosch eBike Charger Wallmount with 2-Layer Spool

This print allows to elegantly mount your Bosch eBike Charger to the wall, out of the way, right where you need it. This version allows to neatly wrap the DC cord around the 2-layer spool integrated in its base. I made this version…

Pobrania
462
Polubienia
94
Ocena
4,91
P
Printablesmontecha

Ebike Elux Holder

Ebike Elux Holder, 3d print designed to hold ten E-Lux vape batteries, can be slotted together to create a larger array. 13 were used to create a 48V E-bike battery pack as seen in this video

Pobrania
395
Polubienia
36
Ocena
0
P
PrintablesPjotrStrog

Ebike Charger Wall Mount (Vanmoof, Bosch, Elops 120E)

A wall mount for the charger of an Elops 120E eBike. I have added the STP file so it can be modded to fit chargers of all brands, like Bosch or VanMoof. I would recommend using PETG as PLA tends to sag with constant stress and heat.…

Pobrania
378
Polubienia
43
Ocena
5
P
Printablesgoju

Wall mount for Bosch ebike Battery Charger 36-2 BCS230

Compact wall mount for Bosch ebike battery charger 36-2 BCS230 with holder for both plugs and routing of the power cable on the rear side. Due to the edge on the underside, the print is made at an angle, which leads to better layer…

Pobrania
361
Polubienia
30
Ocena
5
P
PrintablesTruchsess

Ladegeräthalter Charger Holder Giant ebike

Ich habe mir eine Wandhalterung für das Ladegerät meines Akkus meines Giant ebikes gemacht. Die meisten Halterungen sind für andere Hersteller und passten nicht für die Abmessungen meines Gerätes. Diese Halterung ist für das Ladegerät Typ…

Pobrania
349
Polubienia
37
Ocena
5
P
Printablesgoju

Wall mount for Bosch ebike Battery Charger 4A BPC3400

Compact wall mount for Bosch ebike battery charger 4A BPC3400 with holder for both plugs and routing of the power cable on the rear side. Due to the edge on the underside, the print is made at an angle, which leads to better layer guidance.

Pobrania
330
Polubienia
18
Ocena
5
P
Printableslogi788
Pobrania
309
Polubienia
8
Ocena
5
P
Printablesデニス

Hailong Ebike Battery holder

This Ebike Battery holder only works for batteries with the 3-Notch design. Print Settings: Nozzle: 0.4mm Layer Height: 0.2mm Walls: 3 Infill Pattern: Gyroid Support: Enabled For better results reduce the layer height to 0.12mm.

Pobrania
279
Polubienia
49
Ocena
5
P
PrintablesNigel W

Bosch Ebike Charger Holder

Bosch Ebike Charger Holder

Pobrania
266
Polubienia
25
Ocena
5
P
PrintablesSvw

eBike Charging Station

Convert your Bosch eBike battery charger into a convenient wall-mounted charging station. It keeps the charger where it is needed and provides a tidy and compact solution for all its cables. Moreover, if combined with a plug-in timer, it…

Pobrania
259
Polubienia
94
Ocena
5
P
PrintablesTritschi

Bosch eBike Protection Plug

Org plug was lost. I needed to reeingineer this one for protecting the battery against dirt and water. So I searched and did only find some rough hints, but needed to design from scratch. Using TinkerCad. Using BambuLab A1 with TPU. Two…

Pobrania
257
Polubienia
25
Ocena
5
P
PrintablesRuluk7

eBike back pedaling tool

On eBikes, the chain cannot be moved by pedaling backwards, making lubrication virtually impossible. With this tool, which can be easily attached to the crank, the chain can be moved and lubricated. The tool can be removed after use…

Pobrania
236
Polubienia
23
Ocena
4
P
PrintablesBrent

Shimano EC8004 Steps Ebike Charger Wall Mount

A wall mount to the suit the Shimano EC8004 charger for the EP8 drive systems. This includes a small mount to neatly store the cable when not plugged in. It suits the chargers with the right angled plugs and has a cut out to easily slide…

Pobrania
234
Polubienia
10
Ocena
5
P
PrintablesGogi

Kettenschutz für Cube Katmandu Ebike

Da der original Kettenschutz des Cube Katmandu Hybrid Ebike recht schlabberig ist und auch manchmal an der Kette schleift, habe ich einen Kettenschutz konstruiert der mittels Neodym Magneten diteck auf dem Kettenblatt hält. Der Vorteil…

Pobrania
229
Polubienia
22
Ocena
0
P
PrintablesSimple3D

RAD Power Radcity Ebike Battery holder for Rack or Wall

I bought Sue a second battery for her Rad Power Radcity Step-thru 3 (2021) eBike. I needed some way to attach it to the bike. I designed and 3D printed an adapter that mounts to the rear bike rack to hold the battery. You can lock the…

Pobrania
226
Polubienia
31
Ocena
5
P
PrintablesBent Derailleur

eBike Speed Sensor Bracket (Bafang/CYC)

Mounting bracket for chain stay. The original spare bracket is good but sensitive. This one is simple and replaces it. There is a small angle to make it aligned with the spokes. Update 2025-04-21: I noticed it works great for CYC Photon…

Pobrania
213
Polubienia
18
Ocena
5
P
PrintablesJay

Ebike universal Battery Mount, Holder "Electric v1" for 36v 10-14ah 18650 Cells

I have designed the "Electric" Ebike Battery Mount for myself, but i decided to change it with you all. My Battery has 36v, 12ah and is 70x40x293mm. I have bought it on aliexpress, something like this. Battery-Pack 36v - 12ah Or you can…

Pobrania
208
Polubienia
46
Ocena
5
P
Printablesmaxelman

Wall Holster for Bosch eBike Battery Charger 36-4 / Tern GSD

Wall Holster for Bosch eBike Battery Charger 36-4 / Tern GSD. Has 4 mounting holes, you can choose which work best for you.

Pobrania
206
Polubienia
24
Ocena
4
P
PrintablesLukibro

Bosch EBike Charger Wallmount 6 Ampere

I designed a Wallmount for the Bosch EBike Charger with 6Ampere. It is a little bit bigger than the other ones (2 Ampere or 4 Ampere). You can use this design for every Bosch Ebike charger Happy Printing. :-)

Pobrania
191
Polubienia
14
Ocena
0
P
Printablescmos

Wandhalter für Bosch eBike Akku Powerpack 500 | wall bracket for Bosch ebike battery "PowerPack 500"

Ladestecker passt exakt in den Halter, sodass der Akku beim einsetzen kontaktiert wird. | Charging plug fits exactly into the bracket so that the battery is contacted when inserted. In addition I used THIS model to fix the charter to the…

Pobrania
190
Polubienia
17
Ocena
0
P
PrintablesMaggus

Bosch eBike Charging Port Cover / Ladeport Abdeckung

Replacement cover for Bosch eBike (Cube eMTB 2024) charging port. (Ersatzabdeckung für Bosch eMTB Ladebuchse.) v4 = flat bottom v5 = added a pattern for easier opening (not really needed) I suggest to enable ironing (all top surfaces). No…

Pobrania
184
Polubienia
17
Ocena
5
P
PrintablesTritschi

Gridfinity Tool & Accessory Box for Cube eBike (and Others)

Aren't you also searching for accessories that came with the new bike or you bought tools and spare parts? I got new bike recently and with it a lot of paperwork (manual, descriptions, …) came with it, as also some spare parts or…

Pobrania
183
Polubienia
38
Ocena
0
P
PrintablesRUS

full hand twist throttle fitting for ebike thumb throttle

1) print with 100% infill ! 2) non-grip version: ebike-s73-throttle-v3 3) grip friendly version: super-thin model: ebike-s73-throttle-v5_super_thin

Pobrania
182
Polubienia
6
Ocena
0
P
PrintablesAMC 3D

ebike para dummy

aqui dejo esta ebike maqueta valida para los dummy ,se le puede poner una goma elastica que ara de cadena..la suspension por el interior son pequeños muelles que se pueden conseguir de un boligrafo…son piezas delicadas y chica ..segun…

Pobrania
181
Polubienia
44
Ocena
0
P
PrintablesInadequateDarth

Ebike charger wall mount

Needed a wall mounted holder for a Bosch and Bafang charger. Wanted them to be matching, couldn't find any models that i liked or what i needed. Changed the dimensions of the model from Duderstroger to the sizes for the Bosch & Bafang…

Pobrania
170
Polubienia
13
Ocena
5
P
PrintablesShukuyen

Bottom clamp for Bosch intuvia eBike computer

Jumping on my e-bike one day I noticed that the computer, required to control the electronics, was dangling on the handlebar. One of the clamps was missing, probably just fell off. So I took the remaining clamp and modeled a replacement…

Pobrania
169
Polubienia
15
Ocena
5
P
PrintablesJochen2023

Halter für eBike Ladegerät

Halter für BOSCH eBike Battery Charger 36-4/230 4 Ampere Standard Charger BCS220 – 0 275.007 907 Grundlage von @Erwin Habe seitlich zwei Laschen dazu gemacht, damit ich den Halter in meinem Wohnmobil mit zwei Klebedübeln befestigen kann.

Pobrania
155
Polubienia
20
Ocena
0
P
PrintablesItalianoMedio

AMPLER / CURT / STELLAR / EBIKE / BIKE / HAWK

Since my ebike charging port was always "open" i made a cover witch u just have to stick on. No screws or clips or else... I prited it in PETG. No supports no infill. Rocksolid... So far i am riding the bike already 300km with this cover…

Pobrania
153
Polubienia
9
Ocena
5
P
Printablesswablab e.V.

Ebike Charger Wall Mount Giant GLI180AA

A wall mount for the charger of an Giant or Liv eBike with the GLI180AA charger. I have added the STP file so it can be modded to fit chargers of other brands. I used PLA. It is mounted for one year in the garage and it works fine.

Pobrania
148
Polubienia
6
Ocena
0
P
PrintablesPeakPrinted

Cube Ebike charging port cover

I made this charging port cover for my ebike because the original one broke. You can print this cover with TPU. Ideally, you print it with the bolt symbol facing down. If you want to avoid the overhang, there is a version without the…

Pobrania
143
Polubienia
8
Ocena
0
P
PrintablesLumbi

Wallmount for BOSCH_BPC3400 4A eBike Battery Charger

Wallmount for BOSCH_BPC3400 4A eBike Battery Charger, Remix from arminth and FuWeissingers Wallmount, with Plug Holders on both Sides . Printed with Das Filament PETG clear, 25% Infill, no Support needed. Prusa MK3S+ 0.6 Nozzle / 0.30mm

Pobrania
143
Polubienia
9
Ocena
5
P
PrintablesArnout

dustcover bosch ebike

Modelled based on a picture not measurements, stays in place when riding. Print in tpu or PP

Pobrania
139
Polubienia
7
Ocena
0
P
PrintablesSimple3D

RAD Power eBike Battery Adapter

eBikes are great! The Li-on batteries are powerful, but expensive. In our climate we don't use our ebikes in the winter. We also like to go camping. You can buy expensive “Power stations” or “solar generators”, but they are also very…

Pobrania
136
Polubienia
35
Ocena
0
P
PrintablesFrode H.

Charger dock Bosch ebike

Fits 4 amp Bosch ebike charger

Pobrania
135
Polubienia
14
Ocena
4,5
P
PrintablesTruchsess

Giant ebike Ladegeräthalter Charger Holder

Diese Wandhalterung für das Ladegerät meines Akkus meines Giant ebikes habe ich mir gemacht, weil die meisten Halterungen für andere Hersteller sind und für die Abmessungen meines Gerätes nicht passen. Diese Halterung ist für das…

Pobrania
134
Polubienia
21
Ocena
0
P
PrintablesFrankti

Halter Tenways Ladegerät Ebike alte und neue Version

Der Halter passt zu Tenways Ebike Ladegerät für das alte und neue Genneration er kann an der Wand befestigt werde oder auch mit Kabelbindern an diversen Objekten.

Pobrania
134
Polubienia
6
Ocena
5
P
Printablesnagromnewo

Lectric ebike screen cover

This cover fits the screen on ebikes from Lectric and many other makes. It is meant to protect the screen during transport.

Pobrania
131
Polubienia
20
Ocena
4,33
P
PrintablesMarcus

Hailong Ebike Battery Wall Mount

Updated version, better fit and added screw mount. I am not sure which batteries fit, se pictures.

Pobrania
127
Polubienia
25
Ocena
0
P
Printables3ddruckandi

Yamaha Ebike Ladegeräthalter

Hiermit können sie das Ladegerät für ihr Yamaha Ebike sicher und platzsparend an die Wand hängen.

Pobrania
123
Polubienia
5
Ocena
0
P
PrintablesMartin.Ö

Super73 / ebike headlight

Didn't like the round cheap metal housing for my headlight that I bought so I decided to make my own design. The housing is made from three printed parts sandwiching the LED light and lens together. You will also need some kind of fork…

Pobrania
117
Polubienia
16
Ocena
0
P
PrintablesJekal

Wandhalter eBike Bosch Ladegerät BPC3400

einfacher Wandhalter für das Ladegerät in Garage oder Keller.

Pobrania
116
Polubienia
8
Ocena
0
P
PrintablesMichał

S830 e-bike LCD holder (Samebike LO26)

Alternative, smaller holder for S830 e-bike LCD, used for example on Samebike LO26. Original holder goes over handlebars and is quite wide. I made this one so i could more easily fit a phone holder on the bars. Uses screws from the…

Pobrania
115
Polubienia
11
Ocena
5
P
PrintablesJulian Schrader

Yamaha 2024 Ebike Charger Wallmount

In my case Its a charger for a 2024 Yamaha PWX3 System Chargermodel is BC222360040 or similar

Pobrania
113
Polubienia
10
Ocena
0
P
PrintablesMartin Kessler

Bosch EBike Charger 6A Wall Mount BCS250

Easy to print. Fit's little tight, so feel free to adjust using the Fusion360 file.

Pobrania
110
Polubienia
8
Ocena
5
P
PrintablesHeliguy71

Milk Crate Mount Lectric XP 2.0 Rear Rack eBike

Mount a $10.00 Milk Crate from “The Container Store” SKU#: 280070 to the rear rack of a Lectric XP 2.0 eBike using the stock rear rack. I you want to mount a Milk Crate to a Rad Mini see here:…

Pobrania
110
Polubienia
16
Ocena
0
P
Printables3ddruckandi

Bosch Ladegeräthalter Ebike

Hiermit können sie ihr Bosch Ladegerät für das Ebike sicher und platzsparend an die Wand hängen.

Pobrania
110
Polubienia
6
Ocena
0
P
Printablesmartin

Bosch eBike charger holder

Wallmount holder for 4A BOSCH eBike Battery Charger 36-4/230 Easy to print without supports - see photos Stable design fits perfect Easy and quick insert and remove of charger

Pobrania
109
Polubienia
22
Ocena
0
P
PrintablesSimple3D

Solar eBike Trailer

We are planning on some overnight bike trips with our eBikes. We will need to bring our tent and other camping supplies. We will not always have access to AC charging. I developed this solar panel system that attaches to the trailer. It…

Pobrania
108
Polubienia
44
Ocena
0
P
PrintablesZaQ_1

Battery Plate Connector Engwe c20 pro folding ebike

Beside parts from original battery plate/connector You will need: Soldering flux Solder Soldering iron Super glue Optional nail polish 2 M5x10 screws (check your spare parts bin, I used disc (from disk brake) mounting screws Detailed…

Pobrania
107
Polubienia
5
Ocena
0
P
PrintablesIvaylo

Ebike, hydraulic brakes, magnet holder

I bought e-bike conversion kit and it comes with sensors for the brake levers to shut off motor when braking. Usually you stick the sensor and the magnet to the levers and you are good to go. Not in my case. The magnet travel was minimal…

Pobrania
105
Polubienia
13
Ocena
0
P
PrintablesBringle

Aventon Ebike Digital Display Cover

Display case I made for an aventon ebike, this specific display is called the BC280 on their website. No supports needed for print, only tried installing on the bike with a tpu printed version, you can try something stiffer but that has…

Pobrania
103
Polubienia
13
Ocena
5
P
PrintablesOkcazure

Lectric eBike Battery Charger mount

This wall mount was designed for Lectric XP3.0 54.6Vdc 2.0A charger (https://lectricebikes.com/collections/parts/products/charger). It may work for other chargers. I printed in PLA but PETG would be better for outdoor (garage)…

Pobrania
99
Polubienia
14
Ocena
0
P
PrintablesJochen2023

eBike-Ladehalterungen BOSCH Update

UPDATE :Halter für BOSCH eBike Akkuladegerät 36-4/230 4 Ampere Standard-Ladegerät BCS220 – 0 275.007 907 Grundlage von @Erwin Habe seitlich zwei Laschen dazu gemacht, damit ich den Halter in meinem Wohnmobil mit zwei Klebedübeln…

Pobrania
99
Polubienia
14
Ocena
5
P
Printableszea

Bafang eBike brake disconnect hal sensor and magnet attachment to Shimano SLX brake

This is made up of four prints. The holder of the sensor attaches to the main brake body using thin zip ties and points up towards the length of pull adjustment knob. The two parts with threads on the outside sandwich around the length of…

Pobrania
99
Polubienia
16
Ocena
0

Bosch 36V Ebike Battery connector with CAN pins (5 pins) 100W

Use an Arduino with MCP2515 to Power on the Ebike battery (MCP2515 lib needed) Used the components as described in https://www.printables.com/model/49417-bosch-36v-ebike-battery-connector-diy-2a-charger Isolate with heat shrink and hot…

Pobrania
97
Polubienia
3
Ocena
0
P
PrintablesBent Derailleur

eBike Battery with Holder

Model of the very standard shark battery for your eBike design projects. This particular model is the “Jumbo Shark” version which has no space for controller. Mount is accurate. Battery is just a mock up, not too precise and detailed. Two…

Pobrania
93
Polubienia
12
Ocena
0
P
PrintablesRoket

MTB Chain guide for 36T chainring (Raymon ebike)

I have a Raymon Trailray e-Mtb, changing my chainring from 38T to 34T I needed a new chainguide because the original one leaves a big gap, so the chain could fall off while riding. Based on the old one I created a new one to be flush with…

Pobrania
92
Polubienia
20
Ocena
0
P
PrintablesLime

TranzX DP15 ebike display

TranzX button replacement for the DP15 Print 100% in TPU with supports Cylinder are in PLA Should be glued in place

Pobrania
89
Polubienia
0
Ocena
0
P
PrintablesSchuMaker

Chainguard Yamaha-Ebike

I printed it out of PETG and it worked for one season now. It is mounted at the two screws of the lower cover.

Pobrania
87
Polubienia
15
Ocena
0
P
PrintablesShaun577

Shimano EC-E6002 Ebike Charger Wall Mount

Wall mount for Shimano E-Bike battery charger. Print two of the brackets per charger. Remove four T10 screws from the four corners of the charger. Insert the pins of the printed brackets into the holes where the screws came out of and put…

Pobrania
86
Polubienia
10
Ocena
5
P
PrintablesHeliguy71

Milk Crate Mount for RadMini Rear Rack eBike

Milk Crate Mount Rad Mini Mount a $10.00 Milk Crate from “The Container Store” SKU#: 280070 to the rear rack of a Rad Power Mini eBike If you want to mount this milk crate to a Lectric XP 2.0 click here…

Pobrania
84
Polubienia
19
Ocena
0
P
Printablesgoju

Wall mount for Bosch ebike Battery Charger 36-4/230

Wall mount for Bosch ebike Battery Charger 36-4/230. It offers a small tray, a hook and holder for both plugs. Prints without supports.

Pobrania
83
Polubienia
9
Ocena
0
P
Printableschris-k

BOSCH eBike Pin Cover for Smart System

This is a cover to protect the pins of the Smart System of your eBike when travelling. I recommend to print it with TPU. When it is too loose, you can scale it to 99% or 98%.

Pobrania
83
Polubienia
5
Ocena
4,67
P
PrintablesKubabro14

DIY connection box for ebike controller, wire connection box screw

connection box for connecting wires of ebike controller to motor or anything else with round screw ends wires box is protected from top from shorting for securing bottom is udes hot glue and two side duct tape printed 0.2mm layer height,…

Pobrania
81
Polubienia
6
Ocena
0
P
PrintablesZaQ_1

Discharge Plate Connector Engwe c20 pro folding ebike

Original plate (probably abs) cracked in many places from chemical damage (wd-40 and brake cleaner) I found it under DCH-009 name on aliexpress. So it may fit many more folding ebikes. Printed in PETg, require supports, 3 walls 20%…

Pobrania
81
Polubienia
3
Ocena
0
P

eBike Bafang Battery and Charger Wall Mounts

Wall mounts for Bafang eBike Battery and Chargers. Charger mount holds 2 chargers and would easily hold one with room for extra accessories. I included gcodes for printing 2 battery wall mounts at the same time as well as the single…

Pobrania
80
Polubienia
15
Ocena
5
P
Printablescmos

improved wall bracket for Bosch ebike battery "PowerPack 500" - now with cutout for battery status indicator

better cutout to see the battery status indicator. (bigger than on the image, did not print out the latest version yet)

Pobrania
79
Polubienia
7
Ocena
0
P
PrintablesDrTob

eBike Charger Wall Mount BMZ / Norco

Wall Mount for a BMZ /Norco eBike Charger

Pobrania
79
Polubienia
6
Ocena
0
P
PrintablesScott

Dengfu E22 Ebike Rear Mud Guard

mud guard for E22, recommend to attach with double sided adhesive tape

Pobrania
79
Polubienia
10
Ocena
0
P
PrintablesReewen

Bosch eBike Charger Wallmount (2A Compact Charger)

This is a remix of Svw Bosch eBike Charger Wallmount model to add an option for the smaller 2A Bosch compact charger (see last image to see if your charger is compatible with this model) Printing: I recommend printing in ASA or PETG for…

Pobrania
78
Polubienia
3
Ocena
5
P
PrintablesMagat82

Kettenblattschutz Cube Reaction Hybrid Ebike

Kettenblattschutz zum anklipsen an das Ritzel, ohne Schrauben oder Werkzeug

Pobrania
77
Polubienia
7
Ocena
0
P
Printablessoundwave

Bosch ebike battery handle

This is a replacement handle for all bosch powertube ebike batteries. Print as sturdy as possibly. My settings are: infill 30-50% 3 perimeters paint-on supports for notches Happy printing

Pobrania
76
Polubienia
10
Ocena
0
P
Printablesobfuscurity

Ebike controller mount

This design is a bracket for mounting an ebike controller box to the seat tube. My particular seat tube is 32mm in diameter. The controller was part of a Leeds ebike conversion kit. There are no pre-drilled holes for mounting the actual…

Pobrania
75
Polubienia
11
Ocena
0
P
Printablesmbiersack

Ebike battery shelf

Shelf to hold my battery on my ebike. uses Velcro straps to keep it in place. Also made a tray to keep the battery from sloshing around side to side. Category: Electronics

Pobrania
74
Polubienia
24
Ocena
0
P
PrintablesWolfgang Nagele

Hailong eBike Battery Mount

46mm diameter tube mount. To adjust diameter use OpenSCAD file provided.

Pobrania
74
Polubienia
8
Ocena
0
P
Printablesaeharding

Bosch eBike Standard (4a) Charger Hanger

⚠️ Important! This model works with the 4 amp “standard” Bosch charger. Please check the following picture and make sure your charger matches. ➡ Do you have the smaller 2 amp “compact” charger? Click here to go to the variant! About this…

Pobrania
72
Polubienia
8
Ocena
0
P
Printablesshenanigans

Kids Ride Shotgun Spacer for Canyon ebikes

Update 2025-09-15: Added a shield to the top spacer to prevent the wire going into the handlebar through the stem from getting tangled on the screw. Uploaded as a new step file v2. Designed a custom spacer kit to install onto a Canyon…

Pobrania
67
Polubienia
4
Ocena
0
P
PrintablesMichal

Ebike Escooter twist throttle

STL dimensions are in mm. For 22mm handlebar. I provide also the blender file so feel free to modify the design for your needs. You can adjust the throttle preload by choosing different spring hole on the handle part. Print the stator…

Pobrania
67
Polubienia
5
Ocena
0
P
PrintablesLaksa

Wandhalter für Bosch eBike Intuvia Fahrrad Computer (Display) und Schlüssel

Eine Wandhalterung für den Intuvia Fahrradomputer von Bosch. Dieser wird von oben aufgeschoben. Daran kann man dann gleich auch noch die Schlüssel hängen, damit man gleich alles beisammen hat. Gedruckt habe ich das in PLA+. Aber das Teil…

Pobrania
66
Polubienia
2
Ocena
0
P
Printablesome_cor

Bosch eBike Charger Wall Mount – BPC3400 Holder

Description Bosch eBike Charger Wall Mount – BPC3400 I designed this wall mount to neatly store a Bosch eBike charger (BPC3400). It keeps the charger off the floor and makes cable management much cleaner in a garage or charging station.…

Pobrania
63
Polubienia
3
Ocena
5
P
PrintablesJiK

Battery Ebike pad - podložka pod elektrobaterii EVBIKE na rám

Podložka pod baterii elektrokolo, na rám 35mm. Pad under battery holder EVbike on frame 35mm. Distanční podložka mezi rám a držák baterie. Baterie EVBIKE.

Pobrania
63
Polubienia
8
Ocena
0
P
PrintablesFeiler

eBike Ladegeräthalter Bosch eBike Battery Charger 36-4/1 (0 275 007 900)

EN: eBike charger holder Bosch eBike Battery Charger 36-4/1 (0 275 007 900) DE: eBike Ladegeräthalter Bosch eBike Battery Charger 36-4/1 (0 275 007 900) Parameter: Material: PETG or better Layer: 0,2mm Infill: 100% Support: Yes

Pobrania
63
Polubienia
3
Ocena
0
P
PrintablesmozWORLD
Pobrania
63
Polubienia
9
Ocena
4
P
Printablesc13m3n7

Bosch Powertube Smart eBike battery holder with LED

Added fiber optic path for charging light indicator to the “eBike_Powertube_Smart_Bottom-Vertical-Front” version

Pobrania
62
Polubienia
3
Ocena
5
P
Printableslukasz.jot

Bike / Ebike handlebar cap blinker with mirror holder

Ever since I saw handlebar caps with blinkers for bikes I wanted one on my ebike. But I already had these mirrors that mounted into the hadlebar ends: https://pl.aliexpress.com/item/2041222145.html I really like these mirrors, they are…

Pobrania
62
Polubienia
10
Ocena
0
P
PrintablesJRosello

Specialized Turbo Levo eBike Charger Riser

Specialized Turbo Levo Charger Riser. My Levo is the Aluminum Comp 2023, and I think all the chargers are the same. The charger gets hot when charging and I'm not comfortable with it because floor or table gets hot too, so let's rise it…

Pobrania
62
Polubienia
8
Ocena
0
P
PrintablesTritschi

Bosch Logo for my eBike Charger

When I created a charger holder I realized that the Bosch Logo was upside down. So I svg'ed Bosch's Logo and applied it. After wall mount it looks much nicer than with logo upside down, agreed? CorelDraw traced the logo, export to…

Pobrania
62
Polubienia
3
Ocena
0
P
PrintablesBTran1234

SW900 Ebike Display Cover

Basic snap on cover for the SW900 ebike display. Just designed for aesthetics and as a bumper as I did not like the original glossy plastic. Note that the retention clip at the top of the case is not really needed to fit the cover on the…

Pobrania
61
Polubienia
5
Ocena
0
P
PrintablesPMF

Front Mudguard Extension for MTB Cycletech Code Man eBike

Upgrade your MTB Cycletech Code Man eBike with this specially designed click-on front mudguard extension. Engineered for easy click-on installation, this extension offers superior protection against mud and debris, ensuring a cleaner ride…

Pobrania
61
Polubienia
6
Ocena
0
P
Printablestrevor229

Remixed Sabvoton Controller Wire Cover (Modded for Stealth Bomber Ebike Frame)

I modded the original design to taper towards the top to better fit a Chinese stealth bomber frame profile. This is mounted on the underside near the forks. Using a SVMC72150 controller. I also increased the height of the base piece by…

Pobrania
59
Polubienia
4
Ocena
0
P
PrintablesSteven Martin

EBIKE HYDRAULIC DISC BRAKE CUT OFF SENSOR - Shimano STEF505 3x8s, Hydraulic Brakes

This is a part to place on the brake. It allow you to put in place the sensors to make sure de magnet is aligned to it. Once printed you have to cut the part which is going arround the cable to make it trought. Also i've already make…

Pobrania
59
Polubienia
4
Ocena
0