7042 modeli
A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…
Remix of Tronnic's bridging tower, with the temperatures from highest on the bottom to lowest on the top. This way, you shouldn't experience clogging issues if the lowest temperature is not enough to properly melt the filament. Many…
Download, load and print! Every filament and printer is different. To get the best out of your printer, you need specific settings, which means a particular nozzle temperature. That is the time when Temperature Tower comes in handy. Every…
I wanted a temperature tower that was fast as most of the models would take several hours. Found this model by spiga76 , changed the PLA model a bit to go from 230-190 instead of 240-200 and added labels for filament types. Printing For…
Very quickly slapped together Stringing Test. Markings 1cm apart so you can post-process z-height changes. Deliberatly no temperature numbers b/c they confuse when you use different temperatures (or - like me - test retract distances…
This is the well known Temptower from Tronnic as .3mf to load into PrusaSlicer as well as sliced and ready for the Prusa Mini. Just print the gcode. All gcodes were created with PrusaSlicer 2.2.0 using -) PrinterSetting: "Prusa Mini"…
Skyscraper modeled onscreen on YouTube. I used PLA, 0,10 mm layer height and 0.4 mm nozzle. You dont have to use any supports and 5 % infill is fine. In this configuration, it will take roughly 17 hours to print.
Please don't forget to like the model if you find it useful. Thanks!
When I was looking for templates for printing coin roll paper for private use, I noticed that there were no templates to be found anywhere. So I quickly created some myself. These are print templates for private purposes, so the sizes are…
Tool for make corner radius with router inside table. If you need any other size, just send request I will make it. Changelog: 05/15/2022 - Added 17.5mm version (requested) 07/22/2023 - Added 70mm and 80mm version (requested) Print…
Pre-Sliced the Temp-Tower with the Standard PETG Profile in PrusaSlicer and added the temperature changes accordingly. USE THE .GCODE ONLY IF YOU HAVE AN PRUSA MK3, MK3S or MK3S+ IIT HEATS UP TO 160° FOR BED LEVELING, FINAL TEMPERATURE…
Zen Bridge and Temple. Print separately. Size to your preference.
Tests from 195 - 210 for PLA on my Ender 3 w/ a Micro Swiss Hotend. Remixed from ([https://www.thingiverse.com/thing:2729076) https://www.thingiverse.com/thing:2729076 %5Bhttps://www.thingiverse.com/thing:2729076)] for testing my Ender 3…
Thank you steveleader for making this and available to us. I just swapped the temperature sequence, because starting with 190°C got my print get knocked off. Important: when importing the 3.mf file, copy the Before layer change G-code and…
EN: I wanted temp tower from lowest temperature to highest, but first temperature from 195. Didnť find, so I remixed one for myself. Use it with PLA filaments. Included Gcode file was generated for Prusa Mini in PrusaSlicer. CZ: Chtěl…
I created this parametric OpenSCAD drilling template to help me mount an inset door into a cabinet using some Blum inset hinges. Adjust the “inset” variable in the OpenSCAD code to suite the thickness of your door. I've provided STL and…
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa MK4S with and without MMU3. 17th December - Add MMU3 PETG and PLA 23th November - Fix for…
Sun Shield enclosure that transforms your indoor aqara temperature, humidity and air pressure sensor into an outdoor wireless weather station. The combination of sun shield dishes and internal cavity ensures some degree of air ventilation…
Simple Process Diagramm Template (ISO 5807) in a 5 mm Grid (20x40)
These are very simple drilling template for Blum ClipTop concealed hinges. Mark the position, align the notch, drill/mark I have uploaded the two TB distances I generally use (4.5 and 6.0mm) - see drilling diagram
Why I remixed it I remixed this one because of a comment I read from DERacing: "I get around the 220 mark and the part snaps away from the glass bed." and exactly the same happend to me and as I couldn't find any premade Temperature Tower…
Description Circle template, from 1/4 inch to 2 inches, in 1/8 increments. Corners are radius gauges, 1/4, 1/2, 3/4 and 1 inch. Printing Make sure your bed adhesion and first layer is spot on, details in the numbers are the most…
Temperature towers should be fast and easy. I don't want to wait for hours just for a test. This tower is shorter and narrower than most models out there and uses increments of 10C to quickly get you close to the optimal temperature for…
Useful combination of a box and templates for your notes. The templates come in three versions: To-Do list, with a tick off field lines, for longer sentences blank, for you to add your logo The box keeps your desk clean and organized.…
!! ATTENTION You can't scale the model as the battery size needs to be kept. I would suggest to do min. 4 top layers as I only used 2 which definitely is not enough as you can see on the pictures. For the infill I did 8% Grid. You can go…
Pre-Sliced the Temperature Tower starting with the Generic PETG Profile in PrusaSlicer and added the temperature changes accordingly. Included the .STL too, keep in mind when using it you need to add temperature changes by right clicking…
Remixed and sliced for Temp Tower PLA Core One
I created the template based on a Telecaster body model by Gustavo Rocha in GrabCad. I used it for a guitar I'm currently building. There are six parts to the template, each part sized to fit on a Prusa Mini+'s build plate. I printed them…
This model was originally designed by gaaZolee on Thingiverse. Here is a link to his original model with more information: https://www.thingiverse.com/thing:2729076
Gcode ready to print, to test temperatur lvl of artillery. from 220 to 180 °C Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 10 Filament: everyone PLA, PLA+ Notes: just connect and print. Category: 3D Printing Tests
Small temptower that doesn't take hours to print, just around 1 hour (and 10 minutes). gcode is made in PrusaSlicer for Prusa Mini with a Prusament PLA custom profile. I remixed this from something i found on thingiverse: Smart compact…
One to rule them all. I simply liked the idea of: Filament cutter tool (thanks Pomi ) Sharper point cutter tool (60 ° , thanks kk ) That it could catch the leftovers (thanks Wapameepto ) But without wasting too much (thanks -IIl ) And it…
Find english version below... Box bzw. Behältnis zur Aufbewahrung von AA-Akkus (HR6) und/oder AAA-Akkus (HR03). Unterschiedliche Bereiche und Farben dienen der Unterscheidung ob die Akkus VOLL aufgeladen oder LEER sind. Die…
Wanted a smaller temp tower to just fine tune Prusaments +- 10c of recommended temperature. These are PLA and PETG models. Also sliced with PrusaSlicer. 3mf model files includes custom g-code for different temperatures so you just need to…
Źródło oznaczyło ten model jako treść 18+.
To adjust the temp tower you can use the py-script. https://github.com/HerrSkunkhunt42/temptower-gcode-adjustment Or use the example gcode for PETG or PLA with 0.4 nozzle at 0.2mm layer height. If you use Prusaslicer, you can insert the…
Young Contemplating Girl. I have a few models that I worked on for the nativity set that dont quite fit in. I realized when I added the other models to the plate for size comparisons that the style was just way to different to fit. Enjoy.
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
This is a straight edged version of the Butterfly router template. I included the F3D file so you can scale it to whatever size you need. The inner butterflies of the template are included and are sized .1mm smaller for tolerance. Makes…
Based on the "Prusa Mini Temptower for PLA, PETG and ABS" from steveleader (original Tower from Tronnic), just included commands to wait for the hotend to heat up before continuing the print: PrusaSlicer 2.3.0, Expert mode, tab "Print…
Temperature tower for PLA and PETG including the ready made G-codes for the Ender 3 V3 SE.
Printing The model has two parts: The SPQR text between the laurel branches The pedestal support Both of these can be printed in place. I've tested them with 0.2mm and 638.27% scaling (this makes the SPQR text 4 mm thick). For printing…
This is my third attempt at a 2 speed automatic gearbox and it's been delaying my Unimog RC project for quite some time… You won't see attempt #2 because it didn't work… The clutch would break (too) soon, so I gave up and tried something…
Tefillin House - New Temple Model I uploaded different variations of a new model with minor improvements (such as 2 axes). I uploaded files with "Shel Yad" and "Shel Rosh" embossed or highlighted. The inscription "If I Forget You" is…
Tempomat for Sowlow SO3 E-Scooter
GoPro mount to attach the action camera to all possible surfaces with the help of double-sided adhesive tape. In my case to a fullface helmet. There is a hole where the hexagon screw can be easily attached. I would be very happy about any…
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Print with plastic that flexes a little, PETG or ABS will work. You can put it on or use double sided tape and and stick it somewhere. You may need support on the rabbit's feet.
Any feedback would be greatly appreciated . Add a frame so looks better Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) No Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
This is the gcode for a temperature tower for the original Prusa MK4 with Input Shaper firmware. 0.2mm SPEED stock profile 0.4mm nozzle verbose gcode on your printer must have input shaper firmware and enabled.
I couldn't find a temperature tower I liked because I normally use between 210 and 220°C in PLA. I did not find a simple tower that gives me idea of stringing, bridge and surface in the temps I wanted unless starting at very low temp.…
Jason voorhees mask part 4/IV template. people are selling pdf tempates for a few bucks. but i have a printer and spare time :) I made the template in fusion 360 with the correct dimensions. how to use: Place the template on a paper. use…
Alien Temple Bas-Relief. Looks like it could be split down the middle and made into a gate kind of thing.
Temptower to indicate best temperature for current PLA Temperature in gcode 190 - 235 Celsius
It’s 1 mm high with additional 0,4mm for the text. You can easily change colours between layers for 2-colour effect. Scale it up as you need on axis X and Y (I don’t recommend scaling down).
Holder for temperature sensor from Aqara. The sensor just slide in the holder and can be placed on shelf or furniture. Print settings: PLA Layer height: 0.10mm
This is my terrible attempt to make death whistle. Sounds pretty bad enough to make all the dogs in neighbourhood want to kill me even though I tried it inside with closed windows … so yeah, it is also pretty loud. You need to blow air in…
Temp of nozzle is the main cause of stringing. Print this gcode before trying other adjustments. It starts at 220C, and automatically decreases 5C after each 5mm increments, ending at 180C The picture shows the results when filament is…
All in One Temperature & Bridging Tower - PLA MK4S GCode. Specifically sliced for the latest MK4S version with the 0.4mm high flow nozzle (HF0.4) Uses the default PrusaSlicer 0.2mm STRUCTURAL preset as that is what you will most likely be…
I printed this in PLA for rigidity. You can use the holes to screw down the tick stick or as registration marks. This video explains how to use the Tick Stick in a simple and straight forward way.
This cup behaves normally until it you fill it almost to the top. Then it will automatically empty itself completely. Inspired by a documentary about the ancient Greeks where this Pythagoras Cup was displayed, I wanted to 3D print a…
A really simple wall mount for the "square" Xiaomi Mijia BLE temperature/humidity sensor (LYWSD03MMC). Depending on your printer, you might have to adjust the size a bit. For our Mk3S I created the model with 0.2 mm clearances on each…
Since this model uses bridge infill as the door texture, it's recommended to use Classic instead of Arachne. I provided models with NO shelves and also clean fronts so you can do your thing.
Here are some temple blocks, sizes 4in and 6in. I have included the g-code for printing both and the STLs for each block. Here is a playing example…. Printed on CR-10 using white Sunlu PLA 0.6 mm nozzle .24 mm layer height 15% gyroid…
Just something I designed by request, needed 2 pauses first to set the magnets, second for color change.. Used 5x3 (5mm wide 3mm tall) magnets from amazon was only $7 for 80 **added a blank base to make remixes easy. no text or magnet…
A case for Arudino DHT11 temperature and humidity sensor. The case is printed in two parts. No glue or screws needed. The chassi may have to be cleaned from any residual before inserting the cover. The case can be mounted with…
Holds the square Xiaomi temperature and humidity sensor. (I think this is the Aqara version?) It mounts with a common drywall screw, or with a zip-tie. (There's a flat bit at the top of the screw hole to make zip-tie mounting a little…
Includes TST Original Logo TST Collegiate Affiliate Program Logo TST Satanic GoodWorks Logo TST Helping Hands Logo TST Protect Children Project Logo TST Religious Reproductive Rights Logo The Mission Of The Satanic Temple Is To Encourage…
This is a simple holder for a XIAOMI Digital Temperature/Humidity Sensor (LYWSD03MMC) . I attach the holder to the wall with a small command strip . I use several of these sensors with ATC MiThermometer custom firmware and collect data in…
A template for drawing a No Bullshit Sign : Prints as one piece for easy use. Works with fine tip pens like mechanical pencils. Also functions as a spray paint stencil.
This template is for marking the mounting holes for the 2025 type Ikea Utrusta (110°) and Blum Clip Top Inserta hinges. The small part of the template is for the cupboard side, the big part for the door side. All you need is a pencil and…
Resliced temp&bridge tower for MK4 and XL slicer 2.6.0, PLA, brim, 0.20 DETAIL MK4 - 0.4mm XL - 0.6mm nozzle resliced for new FW 5.1.0 slicer 2.7.0, PLA, brim, 0.20 STRUCTURAL MK4IS - 0.4 nozzle XLIS - 0.6 nozzle
2 gang box is 4.5x4.5 cutout so conduit box can mount low current box cutout for single gang snap-in box
Drapeau de sécurité Carabine Ce drapeau indique que votre arme à feu est déchargée et ne présente aucun danger. Avec sa couleur orange, cette étiquette est très visible et rassure l'ensemble des personnes présentes et les autres tireurs.…
Adjust the four arms to the desired shape, and tighten the nuts to lock them in place. They’re often used as layouts for stairs and window sills or patterns in tile. Measurements are provided in metric and inches. The knob threads into a…
The original hair catcher hangs deep in the drain in the water, which I found very unpleasant, so I designed this hair catcher so that the sieve and the hair can dry and it is perceived as more hygienic. The part was created with FreeCAD.…
Cerimonial Alien Temple. Major mesh fixes with added uv displacement. ' Resculpting to head and temple base.
When you need to mount curtain rods above a window frame, this template provides a quick way to consistently mark accurate drilling holes. Two holes are available, one at 3” and the other at 4” measured diagonally 45 degrees from the top…
🇯🇵 東京へようこそ! ⛩ Welcome to Tokyo! Celebrate Ten Years of MiniWorld3D with an update to one of our first models. You'll need the free model for each featured building in this assembly, this entry is just the base platforms for each, they fit…
To attatch Nanoleaf Shapes Trianglles with screws. After the Nanoleaf Support stated I should use a ruler to make drill holes for the Triangles I construct this drill template. Print with support! Printer: Artillery Sidewinder X1…
EN : Now that the buds and the pollen are back, the greenery appears again on the trees and plants, the white veil gives way to beautiful blue, purple, red, yellow colors among a carpet of green grass. Spring is back ! To celebrate,…
Filament length Less than 2.5m Filament weight Less than 6.5g You can easily test the strength of the filament with leftover filament.The model has a cutout for easy breakage, so you can feel it break at the center of the letter. 260~235℃…
Needed a MINI+ version with the setup so i combined all of the information from the 4 remixed models
This set includes five different sizes of bushings that fit the Milwaukee trim router's large base. They push in and stay securely. There is a 3/8, ½, 5/8, ¾ and 1" bushing to accommodate different sized bits. There is also a baseplate…
Japanese Temple Guardian
🇲🇽 ¡Bienvenidos a Querétaro, México! Welcome to Querétaro, Mexico! The Temple and College of Santa Cruz (Holy Cross) of Querétaro was a Franciscan missionary college, or seminary, in New Spain, in present-day Querétaro, Mexico, and was…
This is a simple template I created to mark the wholes for hinges for Ikea Pax system. You will need also a 35mm cutter for the big whole, the smaller wholes are 5mm, go slow because the thickness of the fronts is only 18mm (ask me how I…
To replace the Ikea Pressa clothespin who's breaking all the time . My model have a print in place pivot point for a better life span. Print instructions Print in one part and press ( until you hear a clic) it before use. Install the…
Salut, Voici une impression pour agrémenter une tour en Kapla pour la réalisation d'un château. J'ai utilisé le nouveau paramètre dans Prusaslicer “surface irrégulière” (épaisseur 0,1 - distance 0,3). Calibré pour les Kaplas originales…
Systemprofil-Eckverbinder für Aluminuim-Systemprofile der Abmessung 20mm x 20mm. in das Loch in der Mitte des Alu-Profils (4,3mm) muss ein M5 Gewinde geschnitten werden. Die drei Alu-Profile werden mit M5x16 Senkkopfschrauben an dem…
STC-1000 is a nice little temperature controller that can be used to control both a heater and a ventilation in an enclosure. 12V and 220V versions are available for 10-15 EUR (Amazon) or $3-5 (AliExpress). This box is designed to be…
Harness the power of 3D printing technology with our free template for a 96-well plate designed specifically for PCR and qPCR strips. This user-friendly template makes organizing and conducting your PCR and qPCR tests a breeze, ensuring…
M104 S260 ; set the current hotend temperature to 260 degrees Ender 3v2 neo
Youtube timelapse video-
Print resolution at 0.10. Print with PLA. gray for the first 0.7 mm, gary for the next 0.7mm, white, and red for the final 0.7mm. I used Sunlu PLA. These templates are the same dimensions as the official ones. Please check out my other…
🇱🇰 ශර ලකවට සදරයන පළගනම! Welcome to Sri Lanka! Sri Dalada Maligawa (Sinhala: ශර දළද මළගව), commonly known in English as the Temple of the Sacred Tooth Relic , is a Buddhist temple in Kandy, Sri Lanka, in the central highlands of the island…
This is a template for easy drilling of Circuitron Tortoise Turnout Motor mounting holes. The Tortoise is a well regarded, slow motion turnout motor that provides reliable operation of model railroad turnouts. Use: Drill a 1/4” hole…
