P
PrintablesSneh
SU27 Firewall
This is a 3d print file for the SU27 RC model that can be purchased on aliexpress here:…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
- Pobrania
- 23
- Polubienia
- 3
- Ocena
- 0
Wyniki wyszukiwania: firewall
102 modeli
P
Printablesfiip_hozjan
Rc plane firewall/motor mount
I made a firewall for rc planes. You can glue one side to the plane and screw the other to your motor. It's 49.5x44x2mm on one side and 2.2mm on the other side because of one motor. the holes aren't perfectly aligned because my motor…
- Pobrania
- 183
- Polubienia
- 21
- Ocena
- 5
P
PrintablesAtlas
Flite Test Swappable Firewall
Elite Test Swappable Firewall, it is 5.1 cm wide by 4.35 cm tall by 2.4 mm thick Category: R/C Vehicles
- Pobrania
- 171
- Polubienia
- 6
- Ocena
- 5
P
PrintablesDennis Howse
Nissan 240sx Firewall Brake line clamps
broke the factory clips off the brake lines on my 240sx so designed these to hold the clamps in using a standard M6 bolt and rivnut on the firewall. made both the 4 Line clamp( closer to brake booster) and 3 Line clamp (other side of the…
- Pobrania
- 165
- Polubienia
- 26
- Ocena
- 0
P
Printablesjurassic73
Firewalla Purple - Mounting Bracket
Print with supports in PETG. You can forego supports and test your printer's bridging. :) Mounts using a few smaller wood screws.
- Pobrania
- 132
- Polubienia
- 13
- Ocena
- 5
P
PrintablesDavid H
Customizable RC Motor Mounting Bracket/Firewall
A configurable motor mounting bracket/firewall for attaching electric motors to Remote Controlled aeroplanes and so on. It was designed to allow easy attachment using hot-glue, cable ties or fixing screws -- or all of the above if you're…
- Pobrania
- 123
- Polubienia
- 13
- Ocena
- 0
P
PrintablesTimPrints
Firewalla Purple 10 Inch Rack Mount
This is designed to house a Firewalla Purple within 1RU in a 10-inch comms cabinet or minilab rack. There are no screws or anything required beyond what you use to bolt it into the rack, the Firewalla will press-fit into the cage and will…
- Pobrania
- 115
- Polubienia
- 10
- Ocena
- 5
P
PrintablesCameron Carranza
Firewall Clip for 92-97 OBS Ford F-Series Truck
Traced this out in FreeCAD from a flatbed printer scan (image included in photos), FreeCAD file is included for any alterations or changes. Unsure of if the bricknose trucks had these so labeling for 92-97 only for now. I started off with…
- Pobrania
- 109
- Polubienia
- 25
- Ocena
- 5
P
Printablesechoromeo
FT Elements Simple Firewall from FliteTest
Yet another version of the FT Elements Simple Firewall. This one prints quickly and assembles just like the laser-cut wooden original. Just add some CA glue and go crash something. Instructions I print using ABS at 100% infill. CA glue to…
- Pobrania
- 104
- Polubienia
- 8
- Ocena
- 3,5
P
PrintablesNeti
FIREWALL 6100 / 4100 1U RACK MOUNT (pfsense)
4x M4 x 40 screws needed for the 6100 or 4100 firewall (optional) velcro tape for the powersupply (optional) c14 to c7 adapter v5.0 with enhanced stability v4.2 1st online release Print: front to print bed (look at the print 3mf)…
- Pobrania
- 103
- Polubienia
- 4
- Ocena
- 5
P
Printablessalvagedcircuitry
Jeep Cherokee Comanche XJ MJ 4.0L Oval Firewall Grommet
This is the Oval-shaped firewall boot / grommet for the Engine Control Harness used by the 4.0L AMC engine. Used by AMC Jeep Chrysler from 1984-1996. It was commonly found in the engine bay of the Jeep Cherokee Comanche XJ MJ. It is exact.
- Pobrania
- 98
- Polubienia
- 31
- Ocena
- 0
P
PrintablesEmre O
Firewalla Gold / Gold Plus 19" Rack Mount Kit
A 1U rack mount kit for Firewalla Gold / Gold Plus. There are 3 pieces to print Left: The main piece for Firewalla. This is a no-screw design and may require some sanding on the interlocking parts. It also may need supports. I shared a…
- Pobrania
- 95
- Polubienia
- 13
- Ocena
- 0
P
PrintablesCameron Carranza
Oil Catch Can Firewall Mount for 92-97 OBS Ford F-Series Truck for Evil Energy Catch Can
Based off of my 92-97 OBS Ford F-Series Truck Firewall Clip . I wanted to mount an Evil Energy Oil Catch Can to my 1997 F-250HD 7.5L (old body style) but couldn't find a good place to mount it so decided to create a drop-in replacement…
- Pobrania
- 95
- Polubienia
- 21
- Ocena
- 0
P
PrintablesSwaggyMike
Firewalla Gold 10" Rack Mount
A 10" rack mount for your firewalla gold
- Pobrania
- 88
- Polubienia
- 12
- Ocena
- 0
P
PrintablesRedPill_Phil
FireWalla Gold Se 1u Rack mount
You need to break this apart in your slicer to fit in the bed. I used CA glue to put this together once it was done printing! if you make it please Share!
- Pobrania
- 84
- Polubienia
- 2
- Ocena
- 0
P
PrintablesTimPrints
Firewalla Purple 19 Inch Rack Mount
This is designed to house a Firewalla Purple within 1RU in a 19-inch rack. This is a remix off the 10-inch design I previously made, but this allows for the wider rack option. The design has been cut so you can print this on any common…
- Pobrania
- 82
- Polubienia
- 4
- Ocena
- 0
P
PrintablesPatman86
Firewalla Purple Wall Mount
A wall mount for the Firewalla Purple.
- Pobrania
- 81
- Polubienia
- 6
- Ocena
- 5
P
Printablesvrsn3ptoh
Qotom/Topton Quad NIC Firewall 10" 1.5U Rack Mount
Rack I made to hold an old Qotom quad NIC PC I've been using as a PFsense box for years. Designed around the space as the top of “Modular 10 Inch Server Rack - Reworked”, which is technically 1.5U but eats into some of the vertical space…
- Pobrania
- 71
- Polubienia
- 17
- Ocena
- 0
P
Printablestransammatt
Firewall Wiring Grommet
This is really nothing special, I just wanted to share the design because it worked well when I printed it. Its not as much of a printable file as it is an example of what worked for me, especially regarding the overhang area. I printed…
- Pobrania
- 70
- Polubienia
- 17
- Ocena
- 0
P
Printablesmarcotheboy
Flitetest FT Firewall
An improved firewall for the standard size Flitetest power pod (for Spitfire, Mustang, Simple Cub, Corsair, etc). I have included motor mount holes (1.2mm diameter, 34mm PCD). There is a hole at the bottom to feed your XT60 connector from…
- Pobrania
- 67
- Polubienia
- 8
- Ocena
- 0
P
PrintablesJeffrey Bird
Firewalla Gold Stand
A simple stand to elevate a Firewalla Gold to allow for better ventilation. You will need to print a top and bottom, along with four of the locking feet. The STLs are correctly oriented for printing. The step file can be split into parts…
- Pobrania
- 61
- Polubienia
- 12
- Ocena
- 0
P
PrintablesKen Mills
Scion / Toyota Firewall Insulation Nut Retainer
Replacement plastic nut to hold the firewall insulation mat on my Scion tC. This will likely fit other Scions and Toyotas. I couldn't find a replacement part so I just made my own. I will update this description with the original part…
- Pobrania
- 60
- Polubienia
- 14
- Ocena
- 0
P
PrintablesChaotic Brain
Parkzone / E-flite F4F wildcat 1.0m replacement firewall
The firewall is not available for purchase from horizon hobby except as part of a whole fuselage. My plane was fine except for the smashed motor mount and firewall. So I designed this printable replacement firewall. It is compatible with…
- Pobrania
- 59
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSP0NZ
Firewall Flanged Standard
Brushless outrunner electric motor firewall for use with most motors with a 16mm x 19mm bolt circle for direct mount, or 34.5mm X-mount bolt circle. 16mm x 19mm mounting locations are slotted to accommodate any motor orientation. Ribbed…
- Pobrania
- 59
- Polubienia
- 6
- Ocena
- 0
P
PrintablesB&B TECH
Easy print firewall grommet
An easy to print firewall grommet for 4AWG wire pass through. For +/- 10mm hole.
- Pobrania
- 59
- Polubienia
- 8
- Ocena
- 0
P
PrintablesLogan K.
Firewall For RC Plane
Drill holes in the fire wall to make it fit your motor. The one hole is the middle.
- Pobrania
- 58
- Polubienia
- 9
- Ocena
- 0
P
Printablesmichal00ss
FT mighty mini firewall 19x16 and 16x16
FT mini firewall for FT mini power pod. Supports 19x16 mm and 16x16 mm motor mounts (most 2205 - 2306 sizes). Three thicknesses to choose from 2, 2.5 and 3 mm. I think 2.5mm is a good happy medium size- works well with my FT Arrow. Large…
- Pobrania
- 52
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMatt Topper
DeskPI 10 Inch Mini Rack Ears for Firewalla Gold Pro
I needed to set my Firewalla Gold Pro back in my DeskPI 8u Mini Rack, due to their metal bar that takes up the last ⅓ of a U. I added a 5.5mm cut out and placed the holes so the whole unit sits back a few MM. All ports are still active…
- Pobrania
- 51
- Polubienia
- 8
- Ocena
- 0
P
PrintablesTim
Rack Ears for Securepoint/Terra Firewall
Brackets for rackmounting firewall appliances including a small bar to fill the remaining space for a 1U rack
- Pobrania
- 50
- Polubienia
- 6
- Ocena
- 0
P
PrintablesRazorsnake706
Firewall for Redcat Impala Chassis
I used black Overture PETG with 15% infill, but i'm sure that lower infill and PLA would be fine, just used what i had on hand at the time.
- Pobrania
- 50
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJasonMakes07
Flite Test Mini Firewall (Simplified)
A 3D printable, simplified firewall for the Flite Test Tiny Trainer . The original is made out of wood, but this works just as well! The hole in the middle is for the shaft to pass through and the four holes on the edges are for screwing…
- Pobrania
- 46
- Polubienia
- 2
- Ocena
- 0
P
Printablesjeremeyi
10 inch rack Firewall with JetKVM
There are two keystone jacks above the JetKVM that I have connected to the hdmi and usb (data only, I am powering the JetKVM on a separate usb port) on the back of the JetKVM. This way I just use a short usb/hdmi patch cable to connect to…
- Pobrania
- 43
- Polubienia
- 18
- Ocena
- 0
P
PrintablesGraFabLab.com
Firewall Frontlines "King" - chess piece
If you’d like to get this model or explore even more of our work, including full figurine collections, exclusive designs, commercial licenses, and other great perks, you can find everything on our Patreon—see you there:…
- Pobrania
- 43
- Polubienia
- 7
- Ocena
- 0
P
PrintablesKamikaze Wombat
Firewalla Gold SE router Wall Mount
Modeled in Onshape. Designed to be printed face down. Onshape document here if you'd like to adjust it yourself: https://cad.onshape.com/documents/f0c431a31746da22a4890fb4/w/612cd78bfe7cc568f03757d9/e/26b2a0ce039ecf70620fe78e
- Pobrania
- 39
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSP0NZ
Firewall Flanged XL
Brushless outrunner electric motor firewall for use with most motors with a 19mm x 25mm bolt circle for direct mount, or 44mm X-mount bolt circle. 19mm x 25mm mounting locations are slotted to accommodate any motor orientation. Ribbed…
- Pobrania
- 39
- Polubienia
- 2
- Ocena
- 0
P
PrintablesPango3001
FT Powerpod Firewall motor mount
Originally designed for the FT Kraken but can be used by other FT design that use the powerpods. Pictured is the firewall_kraken which is the longest but I also included the medium and short designs if you want to save on weight/filament.…
- Pobrania
- 36
- Polubienia
- 3
- Ocena
- 0
P
PrintablesKendall Bennett
FT Mini Firewall Power Pods
Should use 4 or more top and bottom layers or choose a higher infill for more strength. I printed these with PETG for more strength for a lighter pod.
- Pobrania
- 36
- Polubienia
- 0
- Ocena
- 0
P
Printablesnetwolfx
FT Mini Firewall for 13mm bolt pattern
The firewall included in most of the Flite Test kits did not fit the bolt pattern for the motors I had, so I designed one that did. Edit 2/13/19 - I increased the height of the model from 1.5mm to 2mm, slightly thicker than the FT plywood…
- Pobrania
- 35
- Polubienia
- 0
- Ocena
- 0
P
PrintablesHuy
Topton router/firewall custom bottom cover
So I wanted to build a compact all-in-one router + server solution for traveling, and this is the best x86-based mini PC I could find at the time being with all my requirements. Although the cpu never goes over 54C, the AsiaRF…
- Pobrania
- 34
- Polubienia
- 6
- Ocena
- 0
P
PrintablesThatGuy
Firewall Stand v1 - Slots Edition
This stand will support a TOPTON n100 firewall to allow you to place a standard 80mm PC fan underneath for cooling. I specifically made it with these AC Infinity fans in mind since they have silicone rubber feet and external USB power but…
- Pobrania
- 34
- Polubienia
- 3
- Ocena
- 0
P
PrintablesStavros
FT Goblin firewall/motor mount
A better firewall for the FT Goblin, with holes for the hot glue to "catch" better. Every other mount I used has come unglued because there's nothing for the glue to adhere to. This is designed for 16x16 motors, the OnShape model is…
- Pobrania
- 33
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSP0NZ
Firewall No Flange Standard
Brushless outrunner electric motor firewall for use with most motors with a 16mm x 19mm bolt circle for direct mount, or 34.5mm X-mount bolt circle. 16mm x 19mm mounting locations are slotted to accommodate any motor orientation. Can be…
- Pobrania
- 33
- Polubienia
- 2
- Ocena
- 0
P
PrintablesThatGuy
Firewall Stand v4 - Voronai Edition
This stand will support a TOPTON n100 firewall to allow you to place a standard 80mm PC fan underneath for cooling. I specifically made it with these AC Infinity fans in mind since they have silicone rubber feet and external USB power but…
- Pobrania
- 33
- Polubienia
- 7
- Ocena
- 0
P
Printablesbr34ker
ZoHD Dart XL Extreme Firewall Bossmod
This is a reinforced firewall for the ZoHD Dart XL Extreme. It has the trust angle correction already implemented. To install it, remove the original firewall. Make some holes with a sharp knife on the position of the "spikes". Put some…
- Pobrania
- 31
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSupraGuy
Flight Test Mini Sportster Firewall and control horn
I wanted to try some Flite Test models before I built my speed pack, so I downloaded the plans, and when faced with needing to make the firewall and control horns, of course I decided to 3D print it. I used these models for the Tiny…
- Pobrania
- 31
- Polubienia
- 5
- Ocena
- 0
P
Printables3Diocrity
Sheet Metal Press Die for Firewall AC or Heater Lines - Classic Auto Air
Sheet Metal Press Die for Firewall AC or Heater Lines - Classic Auto Air This model was designed very specific for its purpose, but I have had a few people ask me for it, so here it is! I also did my best to make it parametric so you…
- Pobrania
- 30
- Polubienia
- 8
- Ocena
- 0
P
PrintablesPrusdara
Firewall (HUNSN RJ03) wall mount
Wall Mount for the Firewall HUNSN RJ03
- Pobrania
- 28
- Polubienia
- 1
- Ocena
- 0
P
Printableshackoholic
Firewall for Swappable Power pod (mirrored)
A simple, mirrored version of the original Firewall provided by Flitetest for people who don't know how or don't want to mirror the original STL in their slicer, Fusion 360 etc. Basically allows the wiring to come through on the opposite…
- Pobrania
- 27
- Polubienia
- 1
- Ocena
- 0
P
Printablesavb
RC Firewall V2
After flying a full year with the old firewall on several pusher style wings I now improved the design. The walls are thicker to improve the durability and the design now has mounting holes for the motors. The hole spacing center to…
- Pobrania
- 27
- Polubienia
- 2
- Ocena
- 0
P
Printablesjoey
PC Engines APU4C4 Case with SSD Hotswap frame, perfect Firewall
Perfect DIY Case for this nice little Mainboard. Perfect for Building a nice Firewall with PFSense or IPfire. 4gB Lan Ports and a nice amount of speed and flexibility. You just need an old Nortbridge cooler or something like that.…
- Pobrania
- 26
- Polubienia
- 0
- Ocena
- 0
P
PrintablesQwiktune
A/C Delete Firewall Grommet Plugs
I'm not sure what all vehicles use this same firewall grommet, but it was made for my fwd SR20 Nissan's as they all use the same one. So I deleted the A/C in my Sentra/NX2000 and pulled the high and low pressure lines. I then pulled the…
- Pobrania
- 26
- Polubienia
- 4
- Ocena
- 0
P
PrintablesThatGuy
Firewall Stand v3 - Honeycomb Edition
This stand will support a TOPTON n100 firewall to allow you to place a standard 80mm PC fan underneath for cooling. I specifically made it with these AC Infinity fans in mind since they have silicone rubber feet and external USB power but…
- Pobrania
- 25
- Polubienia
- 2
- Ocena
- 0
P
PrintablesNicolaiVdS
FT Dart Firewall
Desing in Fusion360. Dimensions are 100% true to the ones to the plans (available on the Flite Test site) There are 2 versions: Asseble it your self Print and install motor share your makes with us :D If you like it consider to tip. Print…
- Pobrania
- 24
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJangy
Horizon Hobby airplane firewall / motor mount
Horizon Hobby airplane firewall / motor mount for a F4U-4 Corsair 1.2m Category: R/C Vehicles
- Pobrania
- 24
- Polubienia
- 1
- Ocena
- 0
P
PrintablesThatGuy
Firewall Stand v2 - Speed Holes Edition
This stand will support a TOPTON n100 firewall to allow you to place a standard 80mm PC fan underneath for cooling. I specifically made it with these AC Infinity fans in mind since they have silicone rubber feet and external USB power but…
- Pobrania
- 24
- Polubienia
- 4
- Ocena
- 0
P
Printablesczechyour6
Chevy Silverado, GMC Firewall Heat Shield Retention Nuts
I got tired of looking at my fuzzy cardboard heatshield pull away at the top on my 2500HD 2006 LBZ Duramax. There are factory coarse threaded studs on the drivers and passengers side that pass through. These large 40mm (passenger) and 50…
- Pobrania
- 23
- Polubienia
- 8
- Ocena
- 0
P
PrintablesSK S
Eyelets for awnings, banners, firewalls, and tie-downs, 20 mm
Eyelets for awnings, banners, firewalls, and tie-downs, 20 mm
- Pobrania
- 22
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAquaHorizon
ESRack - Firewalla Gold
The ESRack system includes components: Mounting Brackets - used to install unit in the rack, available in 3 sizes: Short Medium Long Device Modules - each module can handle a single device Possible Configurations: - [Mounting Bracket…
- Pobrania
- 20
- Polubienia
- 6
- Ocena
- 0
P
PrintablesSP0NZ
Firewall No Flange XL
Brushless outrunner electric motor firewall for use with most motors with a 19mm x 25mm bolt circle for direct mount, or 44mm X-mount bolt circle. 19mm x 25mm mounting locations are slotted to accommodate any motor orientation. Can be hot…
- Pobrania
- 20
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMakerMeik
Wall mount for "Topton Firewall Soft Router N100"
The bracket is suitable for the mini PC sold as “Topton pfSense Firewall Soft Router N6000 N5105 N100 4x i226-V 2.5G LAN NVMe Barebone Fanless Mini PC HDMI2.0 DP AES-NI OPNsense” on Aliexpress (as of Nov 2024). It replaces the base plate…
- Pobrania
- 19
- Polubienia
- 4
- Ocena
- 0
P
Printablesichraffsnicht
bowden Throttle cable Firewall end M50 S13 S14 S15
A End Piece for a trottlecable of the BMW M50 Throttlecable. Fits Perfect for Schassis. (made it for my S14) Should fit in various nissans or custom builds. 7mm bowden. 15mm Hole. No supports needed.
- Pobrania
- 19
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJose Mauricio Eguivar Duran
Flitetest Swappable power pod Firewall
The latest version of the swappable power pod firewall, works better than the simple flat one. Crash tested.
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJulsen
Aruba Instant On 1930 8G Switch Firewall Mount
Just a little Firewall mount for the Aruba Instant On 1930 switch. I did not want to place the Firewall directly onto the switch since the fw uses the housing for heat dissipation so I designed a little mount for it. After attaching the…
- Pobrania
- 19
- Polubienia
- 1
- Ocena
- 0
P
Printablesdhbiker
2006-2012 Toyota Auris AC firewall pipe
On a daily driver from my father the original bendy pipe seemed to always get dirty and clog up This is kinda sorta the solution to disassemble the original pipe… print this and grab a random hose that fits it with at least bends as…
- Pobrania
- 17
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAquaHorizon
ESRack - Firewalla Gold Plus
The ESRack system includes components: Mounting Brackets - used to install unit in the rack, available in 3 sizes: Short Medium Long Device Modules - each module can handle a single device Possible Configurations: - [Mounting Bracket…
- Pobrania
- 16
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKamikaze Wombat
Firewalla Gold router Wall mount
Modeled in Onshape. Designed to be printed face down. Onshape document here if you'd like to adjust it yourself: https://cad.onshape.com/documents/f0c431a31746da22a4890fb4/w/612cd78bfe7cc568f03757d9/e/95d8bcecdb195f75453ec474 I didn't…
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAdam North
Firewalla Patch Panel cover
Made to replace a group of keystone jacks or rj-45 jacks in certain patch panels
- Pobrania
- 14
- Polubienia
- 2
- Ocena
- 5
P
PrintablesKamikaze Wombat
Firewalla Purple Rack Mount Left
Front edge of opening is raised to prevent device from working its way out over time Modeled in Onshape. Designed to be printed face down. Onshape document here if you'd like to adjust it yourself:…
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesCraftywoods
A Firewall!
A random wall of bricks with a fire on top, also known as a ?
- Pobrania
- 12
- Polubienia
- 2
- Ocena
- 0
P
PrintablesTheGrantz3D
Replacement Firewall for a Great Planes Gee Bee R-2
This firewall is a replacement of the balsa and ply firewall in the original airplane. Print instructions I printed this with the standard setup at .20 layer thickness. You could probably stand to print with a .60mm nozzle for speed and…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
Printablesazdle
SG-1000 Firewall Rack Mount
I'm starting working on mounting all my (non-rack-sized) networking equipment in the side of my rack to get it out of the way for new rack-sized things. This vertically mounts an SG-1000 to any standard server rack. I've used it on the…
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLightBringer
RC Firewall (Flite Test Swappables)
Works on Flite Test swappable planes. Print, glue, and fly! I made screw holes for the motor mount.
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDani Goland
Topton Firewall Ventilated Bottom Cover
This is my first model I ever created, used Fusion 360. A Ventilated and heightened bottom cover for a Topton Firewall to help with the heat generated from the NVMe and the RAM. Couldn't find a model that fit this specific mini pc so I…
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJangy
HobbyKing Durafly Hyperbipe firewall
HobbyKing Durafly Hyperbipe firewall Print Settings Printer: Tronxy D01 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Esun PLA + yellow Category: R/C Vehicles
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesClean Socks
Dragoon motor mount and firewall jig - 30mm
Slicer settings: Top layers - 3 Bottom layers - 3 Infill - 20% Wall lines - 2 Infill pattern - Grid Uses four #4-40 x 5/16 bolts/blind nuts and 2 servo mounting screws. Use a ½ square stick (preferably balsa) along with a 42mm x 42mm x…
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAnthonyH
Firewall motor mount tool
Attach to firewall/motor mount plate and insert into fuselage. Align the post to the angle required and glue firewall in place. The long post allows you to pull the firewall forward for a tight fit in a plane such as a glider that has a…
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
PrintablesClean Socks
Dragoon motor mount and firewall jig - 20mm
Slicer settings: Top layers - 3 Bottom layers - 3 Infill - 20% Wall lines - 2 Infill pattern - Grid Uses four #4-40 x 5/16 bolts/blind nuts and 2 servo mounting screws. Uses a ½ inch square stick or the laminated plywood in your kit.…
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
Printablesbernieke
Wall mount for OPNsense DEC600 (DEC677 and DEC697) series firewall
OPNsense at this point in time does not sell a wall mount for the DEC600 series, only for the DEC700 series, which is not compatible with the DEC600 series. So I created these feet to serve as wallmount. You print two pair of them, one…
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKamikaze Wombat
Firewalla Purple router Wall Mount
Modeled in Onshape. Designed to be printed face down. Onshape document here if you'd like to adjust it yourself: https://cad.onshape.com/documents/f0c431a31746da22a4890fb4/w/612cd78bfe7cc568f03757d9/e/e6db366a632e06c9c9ff0645
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
Printablesnserrett
Pontiac Fiero Parking Brake Cable Firewall Boot
Printed in TPU 95a filament. I used 20% infill, you will need supports enabled for the outer lip of the part. It is a 2 piece design, slip the split inner bushing over the cable, apply a liberal amount of PVC primer to at least one side,…
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesemptyL
Wall Mount Firewalla Orange
This is a wall mount for the Firewalla Orange. Print it in PETG for the flex. Use supports for the bridge over the top. Screw or mount it where you want it. Then press it into the holder. will snap right into place. The PETG has just…
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
Printablesnserrett
Pontiac Fiero Shift and Select Cable Firewall Boot
Printed in TPU 95a filament. I used 20% infill, you will need supports enabled for the outer lip of the part. It is a 2 piece design, install the outer bushing into the firewall, slip the inner bushing over the cable, apply a liberal…
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBeetlebeetle
Flite Test Spear Firewall
Motor-mount holes are 30mm square. The other two holes are to allow bolts to pass through the aft fuselage, which you can then secure with nuts, inside. Category: R/C Vehicles
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesChudsaviet
20mm to 8AWG cable gland (for Nissan Leaf firewall)
20mm sheet metal hole, 6.5mm 8AWG Ancor marine cable, Used to go through a firewall hole in Nissan Leaf ZE1. Shall also work for ZE0.
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesCMBD
68 Mustang passenger side firewall wiring passthrough.
Attaches to two existing screw holes in the upper passenger side firewall. Mounting holes are for use with a button head 10-24 SHCS.
- Pobrania
- 5
- Polubienia
- 2
- Ocena
- 0
P
PrintablesAtlas
BL4108 Motor Firewall
I've included both an STL and an OBJ file, the mount is 2.2in x 3.2in designed for use in a RC Drone edits: I converted holes to slots due to measurement error on the first model
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSteffen Moeller
Cisco Firewall - for whiteboard 3x3mm round magnets
Use colour switching - Dark blue/White top or simular. Any filament - PLA/PETG/ASA… any
- Pobrania
- 4
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMauro Alexandre Pinto
Wall Mount Support for Firewall PfSense J4125
Mounting bracket for mini-computer used as a PfSense Firewall (Width x Height x Depth [WHD]: 137mm
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
Printableshandro
E30 Firewall Stud Zip Tie mount
Replacement for BMW 61131373669 "push button" that screws into firewall or other stud location and has holes for zip ties. Source in OnShape here:…
- Pobrania
- 3
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDom
Refuse Consent Glyph - Privacy Layer-0 Firewall
The Refuse Consent Glyph is a machine-readable, optical Layer-0 firewall designed to protect physical spaces from unauthorized ambient Edge-AI surveillance. As always-on recording devices like AI smart glasses, service robots, and…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesTeamD3dp
Firewalla Gold SE surface mount
This is a fairly simple design that I modeled up to be able to securely mount my Firewalla Gold SE router to the back of a desk without restricting airflow. As is often the case, I wasn't very happy with the available mounts designed by…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesIsaiah_Dupree
Vehicle Firewall-Slot Tapered Fit Gauge V5
# Vehicle Firewall-Slot Tapered Fit Gauge V5 An original, AI-assisted measurement-tool set by Isaiah Dupree for checking the proposed firewall-slot envelope of a vehicle A/C diagnostic electronics enclosure before another full enclosure…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
bowden Throttle cable Firewall end M50 S13 S14 S15
A End Piece for a trottlecable of the BMW M50 Throttlecable. Fits Perfect for Schassis. (made it for my S14) Should fit in various nissans or custom builds. 7mm bowden. 15mm Hole. No supports needed.
P
Printables
Flitetest Swappable power pod Firewall
The latest version of the swappable power pod firewall, works better than the simple flat one. Crash tested.
P
Printables
Firewall Stand v2 - Speed Holes Edition
This stand will support a TOPTON n100 firewall to allow you to place a standard 80mm PC fan underneath for cooling. I specifically made it with these AC Infinity fans in mind since they have silicone rubber feet and external USB power but…
P
Printables
Firewall Stand v3 - Honeycomb Edition
This stand will support a TOPTON n100 firewall to allow you to place a standard 80mm PC fan underneath for cooling. I specifically made it with these AC Infinity fans in mind since they have silicone rubber feet and external USB power but…
P
Printables
Firewall Stand v4 - Voronai Edition
This stand will support a TOPTON n100 firewall to allow you to place a standard 80mm PC fan underneath for cooling. I specifically made it with these AC Infinity fans in mind since they have silicone rubber feet and external USB power but…
P
PrintablesGraFabLab.com
Firewall Frontlines "Bishop" - chess piece
If you’d like to get this model or explore even more of our work, including full figurine collections, exclusive designs, commercial licenses, and other great perks, you can find everything on our Patreon—see you there:…
- Polubienia
- 1
- Ocena
- 0