Wyniki wyszukiwania: gears

Sortowanie

850 modeli

P
PrintablesSDHayes

MUCH Improved Spool Winder - Helical Gears

Version Two of my reimagined spool winder. Les Kaye's model is really nice, but as I mentioned in my previous remix I ran into several issues (some mechanical and some cosmetic) that I felt could be improved, hence my Reimagined Spool…

Pobrania
3427
Polubienia
645
Ocena
4,8
P
Printableskaje

Lathe Change Gears 7x10, 7x12, minilathe

Update Oct. 14, 2022 : Missing files for 60 tooth gear added. These lathe change gears should fit most 7x10, 7x12, or 7x14 mini-lathes. These prints include all of the standard gears, plus some additional gears to make additional thread…

Pobrania
1877
Polubienia
128
Ocena
5
P
PrintablesKiwibloke

LEGO Technic Gears

Three fridge magnets that use some STLs I found online. I adapted the axles so they could accept neodymium magnets so they stick to my fridge. Print the axles with black filament. Glue 8mm diameter by 3mm thick magnets into the axles.…

Pobrania
1111
Polubienia
174
Ocena
2,5
P
PrintablesPrinter Go Brrr

PiP Fidget Planetary Gears - Stack & Linkable

Stackable Print-in-place planetary gears with two different sized links. Stack and connect the sun and planet gears to each other in any way you like. Depending on your printer's tolerances, the gears might run loose or tight. As a guide,…

Pobrania
473
Polubienia
20
Ocena
5
P
Printableschubbs8697

Ford F-150 Gearshift Detent for 2009-2014 F-150s with Floor Shifter / Console Shifter

This is a replacement detent arm for Ford F-150 trucks built from 2009-2014 that shift gears using a floor shifter / console shifter. The original Ford part is very fragile and can easily break when the gear shift assembly is being…

Pobrania
455
Polubienia
16
Ocena
5
P
PrintablesBooks

Demonstration Bevel Gears (2 to 1 Ring to Pinion Ratio)

A set of bevel gears where the pinions have half the teeth of the ring gear. This results in a 0.5 reduction in angular velocity from the drive gear to the free gear. The holes are designed for 8mm diameter shafts, and the free gear sits…

Pobrania
418
Polubienia
39
Ocena
5
P
PrintablesHank

Geared Fidget Spinner - Now with Ovaloid Gears!!!

Basic Info PLA 0.3 mm layers (I did locally refined the layer height for the retention features on the shaft) 3 perimeters 40% Infill

Pobrania
203
Polubienia
40
Ocena
5
P
PrintablesG.R.Gradwohl

Tree Xmas Gears (gearbox) (gear cube)

------------------------- 01.12.2019 ---------------------------- (Updated .GCODE - .3 Draft, bigger and easier Orientation for less Support for easier print and tree-gearbox-final-v2.stl (scaled, oriented) should be printable now)…

Pobrania
187
Polubienia
29
Ocena
3
P
Printables3D a medida

Helicoidal Gears

Helicoidal Gears for treadmill

Pobrania
173
Polubienia
8
Ocena
0
P
Printablesmcfada

National Geographic 2 Pound Rock Tumbler Gears for Speed Reduction

These herringbone spur gears fit the National Geographic Professional 2 Pound Rock Tumbler Kit , which is known for being much too fast compared to other popular tumblers on the market. This gear reduction slows the speed from about 80-85…

Pobrania
157
Polubienia
35
Ocena
0
P
PrintablesChrizz

Gears of War - Reyna's Necklace

Reyna's Necklace from Queen Myrrah in Gears of War 4 Size 61mm x 69mm x 9mm I Printed it on a DLP / SLS Printer but it can easily done with a FDM to, but I'am to lazy to sand these kind of objects :) A Complete Model is included for resin…

Pobrania
148
Polubienia
36
Ocena
5
P
PrintablesAuzziebogan26

Test Print Spur Gears 1:1 Gear Ratio

the bigger gear has 32 teeth and the smaller one has 16 when loading the STL in you will need to split them

Pobrania
130
Polubienia
7
Ocena
0
P
Printableskosteklvp

Warning Sign - Gears

This is a sign with a gears warning. It is designed for printing with a color change mid-print. One from Warning Signs collection. Recommended print settings layer height: 0.2 mm infill: 20% gyroid solid layers: 5 perimeters: 2 seam…

Pobrania
82
Polubienia
15
Ocena
5
P
PrintablesDirkHoefle

GearstickBootclamp

clamps the rubber around the Gearstick down

Pobrania
54
Polubienia
17
Ocena
0

Gears Fridge Magnet

Programs used: Onshape Dimensions: approx. 11 x 6.6 x 0.6 cm Printer: Craftbot Plus Pro Design by Alle43221 Just glue a magnet or two on the back and you're set to go.

Pobrania
52
Polubienia
10
Ocena
0
P
Printablesk.makesstuff

Cryptex Gears and Holder

These gears can be used to encode/decode secret messages and to be used in puzzles. By Providing a starting point such as Square = A. Then you can provide a list of symbols to relay a secret message. We used them for relaying combinations…

Pobrania
39
Polubienia
6
Ocena
0
P
PrintablesBooks

Gear Mount for PIXMA 2522 Feed Mechanism Gears

Gear mount for the gears of a Canon PIXMA 2522 inkjet printer feed mechanism.

Pobrania
32
Polubienia
4
Ocena
0
P
PrintablesAdam

Replacement crank for classic Playskool Busy Gears

This is a replacement crank for the vintage Playskool Busy Gears set: I did not have an original to model, so my version is a bit different (it has an octogonal interface and a print-in-place handle spinner for maximum fun). The edges are…

Pobrania
27
Polubienia
9
Ocena
0
P
Printableswerz 99

Bushing and Nut for Changegears

Addtional Nut and Bushing for Emco Maximat Super 11 Lathe. The bushing is part of the stud to mount changegears. The M18x1.5 finethread needs to be recut - you can do this with the threads of the original stud in your lathe (ASA has more…

Pobrania
21
Polubienia
3
Ocena
0
P
Printableswerz 99

Spacer for Changegears

10mm spacer for changegears of Emco Maximat Super 11. Needed when there is only a single gear mounted in the geartrain to fit for this bushing : https://www.printables.com/model/1001638-bushing-and-nut-for-changegears

Pobrania
14
Polubienia
1
Ocena
0
P
PrintablesLV3D

Planetary Gears Fidget Spinner

🌀 Fidget Spinner with Planetary Gearbox (Double Helical Gears) Description: A stylish fidget spinner combined with a functional planetary gear system. It features six planet gears rotating around a central sun gear, all enclosed in a ring…

Pobrania
21 049
Polubienia
1770
Ocena
4,81
P
PrintablesJerryie

Gearshift fidget toy V2

Update 25.8 Added a version separated into 3 parts to prevent the stick from breaking. V2 – with "R" gear and new design. Available with keychain holes. Fully print-in-place – no assembly required. Tip: When removing the plate from the…

Pobrania
11 618
Polubienia
1660
Ocena
4,06
P
PrintablesSTORM DESIGN

Bambu Lab Filament Spool Winder - Upgraded All Gears and Axes

BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “All Gears and Axes” for an amazing project " Filament Spool Switcher & Winder " Design by…

Pobrania
11 580
Polubienia
1097
Ocena
4,86
P
Printablesonez

LEGO TECHNIC COMPATIBLE Gears & Differential

Gears&Differential that are compatible with brick systems. Load the file into your slicer and right click, select “split→to objects”. Then pick the gears you need out of the stl/step and delete the ones you dont want to use - print laying…

Pobrania
7422
Polubienia
743
Ocena
4,73
P
PrintablesLI-Maker 15

Gearshift Fidget

The Gearshift Fidget is the perfect fidget for all car lovers! But it's also perfect for everyone else, because it's simply great fun to use. The aim is to move the gearshift lever through the various positions. It is designed so that you…

Pobrania
6902
Polubienia
907
Ocena
4,75
P
PrintablesShoshke

Planetary Gears Fidget - Print in Place

This is a Herringbone Planetary gear fidget to keep your hands busy. With a 3/1 reduction can also be used to demonstrate planetary gear reduction. (The ornate option is great for this demonstration) The design incorporates herringbone…

Pobrania
6741
Polubienia
801
Ocena
4,84
P

Fidget Gears - Print in Place

Designed with a 0.3mm clearance. This model will bridge a maximum of 27mm towards the end of the print, so make sure your printer can handle that :) Slicing 0.16mm Layer Height 3 Walls instead of infill No supports No brim Warning Do not…

Pobrania
6239
Polubienia
969
Ocena
4,88
P
Printablesmarian42

Lego Technic compatible gears with custom sizes

Lego Technic compatible gears/cogs with custom numbers of teeth. If two gears have a combined number of teeth that is a multiple of 16, the distance between the axes is an integer number of Lego holes. For example, a combination of a 24…

Pobrania
5768
Polubienia
784
Ocena
4,7
P
PrintablesTomek

Turbine blower (two planetary gears 36:1 - faster, stronger, louder)

My hand cranked turbine blower is cool and works fine - however you have to crank it really fast for a nice blow. So i tried to add another planetary gearbox - and it works so much better (and unfortunately louder). All parts are 3d…

Pobrania
5730
Polubienia
1712
Ocena
4,36
P

Gearshift Keychain - Keyring Shifter

The revisiting of an old project of mine, which I had published here on Thingiverse with my old profile Ive printed using a Bambulab X1C and printed with Sunlu Matte PLA.

Pobrania
4791
Polubienia
843
Ocena
4,75
P
PrintablesAndrew Deml

Helical Fidget Gears

Just a fun fidget toy that I designed to understand helical gears more. You will need to print 2 Gears 2 Pegs 1 Holder Use this link to get commercial use and to support my projects! use code PRINTABLES20 to get 20% off!…

Pobrania
3273
Polubienia
590
Ocena
4,68
P
Printablesyahbluez

Three Cube Gears

Cubed Gears A cube made from gears with a center block and pins to fit everything together. Easily printable with PLA no supports needed . This one is printed with a two colored illusion filament. This kind of filament changes his color…

Pobrania
2651
Polubienia
459
Ocena
4,9
P
Printablesdarko.straus

Lego Technic compatible double helical gears

Lego Technic complatible double helical (herringbone) gears. The dimension axle hole for the gears were taken from the Lego Technic compatible gears with custom sizes with axle holes able to slide along the axels.

Pobrania
2304
Polubienia
330
Ocena
4,71
P
PrintablesJonathan Hill

Fidget Gear (Herringbone Gears)

This is my first published model, it took lots of prototyping and works really well. I hope you enjoy it.

Pobrania
2209
Polubienia
257
Ocena
5
P
Printablesrcmz

Eccentric Planetary Gears 12

Drawn from https://x.com/Yugemaku/status/2065409694076948676 Remix it at https://cad.onshape.com/documents/ecef395d0126740c808e8498/w/7459f0b74d728c49a07721c2/e/cfa0ce91547c69737216c425?renderMode=0&uiState=6a30621c8ef74c640e30e41c Runs…

Pobrania
2041
Polubienia
326
Ocena
4,72

STL Hardware Parts - Gears

A selection of gears from the STL Hardware Parts library. print at 0.12mm and add brim and/or supports as required. Bevel Gear Internal Gear Gear Rack Ratcheting Gear Ratcheting Pawl Round Bore Worm Worm Gear 90° Crossed Gear Ring Gear…

Pobrania
2004
Polubienia
902
Ocena
0

Jedi Holocron (with gears) - Star Wars

Update August 31 2022 - Got a little ahead of myself by posting this remix without testing out the assembly (made mine out of the original) so once I printed it found the gears are easy enough to get in for the first 3 but the fourth one…

Pobrania
1920
Polubienia
908
Ocena
4,88
P
PrintablesSpike Mix

Gears heart fidget toy keychain

I've added an alternative set of gears that are a little shallower for those who had problems with the clearance between the gears and the body. I'm keeping up the original set bc it works just fine when i print it, and maybe you prefer…

Pobrania
1827
Polubienia
440
Ocena
4,75
P
PrintablesFurial

GEARS COLLECTION - SET OF 22 HIGHLY DETAILED REPLACEMENT GEARS

Update: 10.06.2024 - additional 12 gears added This is a set of 22 replacement gears with different inside and outside teeth amout. Size of the internal hole for the axle: 3.2mm Let me know if you require any other gear to be created. 3D…

Pobrania
1671
Polubienia
640
Ocena
5
P
PrintablesMORON

Bevel Gears (semi-finished)

The model of the part is suitable and made for further modification for various projects, just like the Universal Ball Joint (https://www.printables.com/model/78847-universal-ball-joint). If needed I can export to other files or improve…

Pobrania
1604
Polubienia
85
Ocena
5
P
PrintablesJerryie

BIG Gearshift fidget toy

“R” gear - available in both right-side and left-side versions For a smoother gear shifting experience, press the lever down while changing gears . Fully print-in-place – no assembly required No supports needed Tip: When removing the…

Pobrania
1525
Polubienia
159
Ocena
5
P
PrintablesDangineering

Print in Place 3 in 1 Planetary Gears

It is what it is! The inner most bearing can be difficult to print as it has the closest tolerances. So I would be careful while printing that one. Assembly/Demonstration Video: I printed these at 0.15mm out of PLA Pro. However you can…

Pobrania
1423
Polubienia
232
Ocena
5
P
PrintablesCal LF

Sprockets/Gears For Print In Place Gear Chain - Fischertechnik

Set of sprockets or gears for the chain listed below. Each pair is a set screw locking hub and a idler style. 10, 15, 20 and 30 tooth to get many ratio options. https://www.thingiverse.com/thing:3313211 fischertechnik compatible…

Pobrania
1362
Polubienia
149
Ocena
5
P
PrintablesKasinatorHH

Fidget Gears V2 Keychain Print In Place

Update 2029-07-21: added post print section. After all the updates to my Anycubic I3 Mega-S printer I'm now able to print this at 100% size! Updates on Printer were: TMC2208 Steppers, Marlin 1.1.9 Firmware, new part cooling. Important…

Pobrania
1288
Polubienia
138
Ocena
4,2
P
Printablesbiketiger

FIDGET SPINNER KEYCHAIN WITH MOVING GEARS

Spinner keychain with spinning gears. 0.2mm layer height recommended ***NEW "BUILDABLE" VERSION ADDED FOR THOSE THAT DO NOT WANT TO FUSS WITH PRINT-IN-PLACE*** ***BUILD VERSION UPDATED TO BE A BIT MORE FRIENDLY*** This is an advanced…

Pobrania
1251
Polubienia
162
Ocena
4,33
P
Printablesjirka

Helical Fidget Gears - remix

This is a modification of another model by @AndrewDeml_310771 where I shrunk the edges to make the fidget more comfortable in the hand but mainly modified the holder/cage for the gears so that it can be printed without supports. I…

Pobrania
1172
Polubienia
203
Ocena
4,71
P
Printablesicybaker

GEARS! (Metric)

Check out my Imperial set of gears here for gears with a convenient tooth size for things designed in inches. This is a set of mating gears with a diametral pitch (P) of 1tooth/mm. I include gears for 10-40teeth in increments of 2 teeth.…

Pobrania
1141
Polubienia
87
Ocena
5
P
PrintablesMoreMorris

Differential Gears

Differential gear is something that is pretty hard to understand. So why not print one out and see how it works! Please print the connectors horizontally, this means when you put it in your slicer orientate it horizontally. So when you…

Pobrania
1064
Polubienia
135
Ocena
4
P
PrintablesMeideC

Bevel Gear tester with parametric gears

I needed a bevel gear system to another project, and I tried to look for existing solutions, but I could only find ones where the files were provided as STLs, making them hard to modify. So I decided to try my hands at designing my own…

Pobrania
923
Polubienia
97
Ocena
5
P
Printableswolffaayyy

Drip Caddy V2 for Heygears Reflex RS

If you read this, please leave a ❤! While using my original design I noticed it was difficult to grab onto the build plate with one hand. The caddy was in the way! I've mirrored the design so it mounts on the back of the plate instead of…

Pobrania
905
Polubienia
30
Ocena
5
P
PrintablesLayerLogic3D

Mountain Bike Gears

Mountain Bike Gears Scale and print as desired!

Pobrania
897
Polubienia
147
Ocena
5
P
Printablestmackay

Compound Planetary Gears 1:3915

Playing around with more gear ratios. Might use this in a puzzle… Customized version of https://www.thingiverse.com/thing:3497579 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3497579 Instructions…

Pobrania
854
Polubienia
24
Ocena
5
P
PrintablesShadowRaven1808

Screwless Cube Gears

Not my models all the credit goes to @ emmett

Pobrania
808
Polubienia
392
Ocena
4,91
P
PrintablesCalwys3DForge

Planetary Gears Fidget Spinner - Double Helix, Print In Place

About A fidget spinner featuring planetary gears. A wonderful fidget toy great for relieving stress. The double helix design of the gears creates a unique and innovative aesthetic style. The design has an outer diameter of 100 mm and a…

Pobrania
787
Polubienia
49
Ocena
3
P
PrintablesAdioliquid

Slot Car Chassis and gears

Slot Car Chassis that fits a DC Motor 3-6VDC 25MM

Pobrania
777
Polubienia
55
Ocena
5
P
PrintablesMrJamin

BexGears Prusacaster

I ordered the BexGears TL kit from Amazon (before price hikes) and ended up needing to update the Pruscaster model to make it work with the kit. Updates: Removed 5th Neck Hole Slightly Adjusted positioning of the Neck mounting holes…

Pobrania
697
Polubienia
141
Ocena
4,7
P
PrintablesmahatmaJman

Planet gears

This is a really basic planetary gear set for fun and for learning about gear systems. Uses 3 x M3x15 screws for assembly.

Pobrania
688
Polubienia
66
Ocena
4,33
P
PrintablesLinkreincarnate

Gears Of War Cogtag

Printer friendly remix of both of the gears of war cog logos. (Yay mashups) Print flatback to print with no support. Print the other for a nicer cogtag using your slicer support options or on an sla or sls type 3d printer. Category: Costume

Pobrania
687
Polubienia
60
Ocena
4,75
P
Printablesrcmz

Eccentric Planetary Gears 6

Drawn from https://x.com/Yugemaku/status/2065448124529975712 Remix it at https://cad.onshape.com/documents/ecef395d0126740c808e8498/w/7459f0b74d728c49a07721c2/e/cfa0ce91547c69737216c425?renderMode=0&uiState=6a30621c8ef74c640e30e41c Runs…

Pobrania
673
Polubienia
131
Ocena
4,75
P
PrintablesDragon

Print in Place Gears

This was made for a blender video I made on the subject…

Pobrania
649
Polubienia
90
Ocena
5
P
PrintablesTomKnox

LEGO - Technical Gears

LEGO Technic Gears - most common gears and colors. Parts included: 3647 Technic Gear 8 Tooth 3649 Technic Gear 40 Tooth 3650 Technic Gear 24 Tooth Crown Type III (x pattern) 4019 - 4562487 - 4211563 Technic Gear 16 Tooth 4143 Technic Gear…

Pobrania
648
Polubienia
55
Ocena
0
P
Printableskaje

Lathe Change Gears - 9x20

If you have a 9x20 lathe then you know what change gears are, and if you bought a used 9x20 lathe some of those gears may have gone missing. These 3D printed gears can be used to replace missing gears. Even if you have the original metal…

Pobrania
642
Polubienia
45
Ocena
5
P
PrintablesBerkay

12 Teeth Gears

12 tooth gear. inner diameter 5 outer diameter 13.5

Pobrania
635
Polubienia
16
Ocena
4,67
P
PrintablesJBoe

Universal Spur Gears Collection, module = 1

Object Description: This is a collection of spur gears with a pressure angle of 20°, module = 1 and 12 to 40 teeth. You can easily modify this basic models for your needs with slicer functions only. For example: all models are 5mm thick.…

Pobrania
634
Polubienia
33
Ocena
0
P
PrintablesKasinatorHH

Fidget Gears Revolving V2 Print-in-Place

Maybe that saves some lives against corona: Corona Hook Thanks for all the 45 successful makes reported on thingyverse! Appreciated! Let's see how many prusa-community makes. If you like my design and want to support me, please leave a…

Pobrania
625
Polubienia
68
Ocena
3,83
P
Printableshonza03210

Planetary gears fidget spinner

Fidget spinner adapter for herringbone planetary gears -https://www.printables.com/model/3119-herringbone-planetary-gear

Pobrania
593
Polubienia
46
Ocena
5
P
PrintablesMW-Mechanical

Piston Engine Mechanical Sculpture (With Dual Stage Fan and Double Helical Gears)

View the following link for video demo. View 10-step assembly guide in photos. Post your makes! Seeing your prints is my main motivator for posting models! Design intended for .4mm nozzle and ≤.3mm layer height. Support material ONLY on…

Pobrania
581
Polubienia
134
Ocena
5
P
PrintablesJBoe

Universal Spur Gears Collection, module = 0,9

Object Description: This is a collection of spur gears with a pressure angle of 20°, module = 0,9 and 12 to 40 teeth. You can easily modify this basic models for your needs with slicer functions only. For example: all models are 5mm…

Pobrania
579
Polubienia
40
Ocena
5
P
PrintablesAdam

Gears

Other necessary components: 2x screw M3-10 Printing parameter: Nozzle: 0,4 mm Layer height: 0,2 mm Perimeters: 2 Infill: 15% Supports: None Filament: PLA

Pobrania
561
Polubienia
69
Ocena
5
P
PrintablesPeter L

Sam's Gears

My nephew Sam has a birthday coming up, so I designed and made him this gear toy. This set has gears of multiple sizes and lets you stack gears together so you can make different gear ratios. For the base you can either print out the…

Pobrania
514
Polubienia
110
Ocena
5
P
Printablesbzqp

Super Bot Gears - a 3D-printed Arduino starter kit

Hello! This is an educational Arduino set I've prepared for my nieces to teach them about electronics. While I was at it - I decided to also make it Open Source and publish it on the internet for free! The wiring diagrams, Arduino Code,…

Pobrania
513
Polubienia
140
Ocena
5
P
PrintablesDrJones

fidget gear ring with 2-toothed planet gears

I have made planetary gears with 4-toothed planet gears… I have made them with 3-toothed planet gears… (see my collection ) and now with planet gears that have only 2 teeth! Their movement in perfect unison is quite mesmerizing to watch.…

Pobrania
507
Polubienia
44
Ocena
4,75
P
Printablesv0lc1f3r

HeyGears Ultracraft RS Resin tank cover

Two models are included, the entire plate can be printed at once if you have a large format machine. For smaller machines, the plate is cut into 3 parts and fixed using 2 structures requiring 3.5 / 4 mm diameter wood screws (they must be…

Pobrania
469
Polubienia
37
Ocena
4,75
P
PrintablesRelive93

VW T5 Gearshift cover

Broke my gearshift cover. so i reconstructed it in CAD. Printed it with my Prusa Sl1 s.

Pobrania
465
Polubienia
46
Ocena
5
P
Printablesturnipninja

Nautilus gears with improved frame

Remix of a great model by MishaT. These spiral shaped nautilus gears have varying gear ratio throughout the rotation, unlike normal circular gears. I found that the wheels kept catching on the frame, so I added a ring segment to the…

Pobrania
460
Polubienia
48
Ocena
4,63
P
Printablesmarci.l

Gears for Tchibo Vollautomat coffee machine from Amazon

Spare Gears for Tchibo Vollautomat coffee machine from Amazon. 10 teeth, 22 teeth and 24 teeth. printed: 0.1 layer height 0.2 layer with The teeth on the gears broke and I drew new ones. I printed them with PETG material and they worked…

Pobrania
459
Polubienia
9
Ocena
4
P
PrintablesJulian

Crawl gears for TRX4m

Because of the availability issues of the original Traxxas part TRX9776R i've decided to recreate those exact gears to print on my resin printer. Print everything with supports to avoid the elephants foot, and orient all gears as shown in…

Pobrania
457
Polubienia
66
Ocena
0
P
PrintablesArea 3d Studio

Gears of war wall art

Decorative plate for a door or a wall inspired by the video game Gears of War. Print instructions The file is prepared for filament changes at certain heights just press slice on the Prusa Slicer and you can see what colors you need and…

Pobrania
453
Polubienia
56
Ocena
5
P
PrintablesFotsyrk

kinetic gears

spining kinetic gears for god feeling

Pobrania
449
Polubienia
37
Ocena
1
P
PrintablesFurial

FLAT GEARS COLLECTION - SET OF 10 HIGHLY DETAILED REPLACEMENT GEARS

This is a set of 10 replacement gears with different teeth amount and inside hole sizes. Size of the internal hole for the axle differs between 2mm and 8mm. Let me know if you require any other gear to be created. 3D PRINTING SETTINGS:…

Pobrania
449
Polubienia
55
Ocena
0
P
PrintablesBrandon

Roomba Compatible Side Brush with Replacement Gears

My brush gears have stripped over the years of use, and the brush lost one of the arms due to wear. These are a direct replacement for the brush and gears. Step file added for any needed minor adjustments. Models could potentially be…

Pobrania
448
Polubienia
51
Ocena
0
P
Printablescas

gears

gears from 10mm to 100mm with 10mm center hole exept 10 teeht gear that one is 5mm. and a depth of 5mm

Pobrania
422
Polubienia
29
Ocena
5
P
PrintablesMakerwiz

IBC Cube Gears

Customized version of http://www.thingiverse.com/thing:213946 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=213946 Print instructions Category: Interactive Art Instructions Using the following options:…

Pobrania
419
Polubienia
25
Ocena
5
P
Printablesvulcan

STEM / Robotics Fidget Spinner Trophy made with Planetary and Spur gears

Hey there! I made this super cool trophy that screams STEM with three planetary gears and spur gears – it's like robotics magic! See how it rocks in this YT short. Putting it together is a breeze. Just five parts that snugly click into…

Pobrania
408
Polubienia
35
Ocena
0
P
PrintablesAdrianM.

Gearshift Dacia Logan / Renault Logan

Gearshift Dacia Logan Lever hole diameter 12 mm Software: PrusaSlicer 2.7.1 Perimeters : 4 Infill : 10% Brim : Yes Skirt : No Support : Yes Layer height: 0.2 mm Material : ABS If you print this accesories please share your make, leave a…

Pobrania
407
Polubienia
38
Ocena
0
P
PrintablesCkobar

Fidget Gears for School Math. Basic calculation 2 to 9

I did these for my wifes school class. Printed them in PLA with a layerchange for the last 2 layers, for the numbers. it depends a little on the filament but with the blue one there were loose at once. The tricolour was a little tighter.…

Pobrania
403
Polubienia
90
Ocena
5
P
PrintablesRyCoFX

Snap Together Mechanical Gears

Gears print separately. Before snapping the gears onto the pegs, use an exacto knife to cut/clean out the cross sections for each peg. At some point I'm going to revisit this design to incorporate a pegboard and more gear shapes.

Pobrania
401
Polubienia
55
Ocena
3,5
P
PrintablesJBoe

Universal Spur Gears Collection, module = 2

Object Description: This is a collection of spur gears with a pressure angle of 20°, module = 2 and 12 to 51 teeth. You can easily modify this basic models for your needs with slicer functions only. For example: all models are 5mm thick.…

Pobrania
399
Polubienia
20
Ocena
0
P
PrintablesNotSure

Obscure Gears (print in place)

Print it, turn and see what happens. Simple planetary gear that is obscured when turning. If turning in one direction it will at some point go back to normal but it takes a lot of turns. Not sure how many (18 thanks to ChrisHitchabout…

Pobrania
389
Polubienia
48
Ocena
5
P
PrintablesLumian

Gears of War Gnasher

Decided to design the Gears of War Gnasher in a printable form as a personal challenge No Glue required for assembly, only screws and nuts Trigger has two pins, one for the trigger itself, one for a rubber band to be slung around to for…

Pobrania
386
Polubienia
110
Ocena
0
P
PrintablesAlzibiff

Nautilus Gears with a stronger connecting bar

The design by MishaT is amazing, fascinating and intriguing but it didn't take long for the pins to snap on two of the prints which I had made of this thing despite me printing out the latest version of the connecting bar, V2. Thinking…

Pobrania
376
Polubienia
42
Ocena
5
P
Printableslmc555cmx/nopb

Rack and pinion gears

Rack and pinion gears

Pobrania
374
Polubienia
22
Ocena
5
P
PrintablesAkira4king

Fidget Gears

These are two different sized gears to fidget with. I have printed them out of PLA, PETG and Nylon. The Nylon version worked the best as nylon is nice and slippery. Both of the other materials worked as well but you may have to modify…

Pobrania
373
Polubienia
78
Ocena
4
P
PrintablesIsaac Howard

PrusaCaster mod for BexGears Electric Guitar Kits

UPDATE Guitarv2.stl now has the Bridge and Pickups lowered by 12mm to fit the BexGears kit better. The 4 holes used to attach the neck are in totally different areas. PrusaCaster mod for BexGears Electric Guitar Kits…

Pobrania
373
Polubienia
84
Ocena
5
P
Printablesquibeck

Meshing Gears Finger Fidget- (2x Video included) modular!

Geared Finger Fidget – The Gears Are Connected! A satisfying 3D-printed fidget toy that connects all four fingers through a set of interlocking helical gears. Slide your fingers into the four rings and move them — thanks to the…

Pobrania
369
Polubienia
125
Ocena
5
P
PrintablesAndrey Dolgikh

Porsche Boxster 987 Convertible Top Transmission Worm Gears

Porsche Boxster 987 convertible top transmission worm gears occasionally break due to age and/or excessive strain due to malfunctions. I have designed a replacement. Left and right gears are slightly different. Mirroring one gear in the…

Pobrania
365
Polubienia
24
Ocena
5
P
PrintablesŁukasz Dubczyk

Set of common toy replecament gears

10, 20, 38, 36, 40, 60, 100 teeth gears

Pobrania
352
Polubienia
43
Ocena
0
P
Printables3DPeter

Fidget Gears 2

A simple fidget with two gears to keep your hands occupied. A decently tuned printer should handle the tolerances and the bridging. Printing instructions: No supports required. Layer height: 0.2mm. Good bridging needed.

Pobrania
344
Polubienia
15
Ocena
5
P
PrintablesStuart800

Solder Scroll - Adjustable Solder Tool Without Gears

Thanks to Victor for the great Solder Scroll. In the original the drive rollers have different diameters, but the gears give them the same speed. This causes a drive wheel to slip. I removed the gears, widened the rollers and inserted a…

Pobrania
343
Polubienia
78
Ocena
4
P
PrintablesMLampe

Sim Racing 8x8 LED Case/Mount (For Gears/Flags/etc)

Included is a two piece case for an 8x8 WS2812B LED matrix. I use this wired up into an Arduino Uno connected via USB to my PC and controlled with SimHub. Materials Here is the exact 8x8 LED matrix I bought from amazon: 8x8 LED WS2812B…

Pobrania
342
Polubienia
56
Ocena
0