600 modeli
If you enjoy this model, take a look at the new F23 Glider: https://www.printables.com/model/456057-f23-ultralight-glider-print-in-place or a glider starship:…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
A completely new Ultralight Glider design inspired by the YF23 fighter jet concept and using lessons learned from my previous Ultralight 2gram Glider: https://www.printables.com/model/430012-ultralight-2gram-glider-print-in-place (also…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
The green mat is 1 meter for scale. You can count frames to determine the speed it you like! The video is at 30 fps like all standard youtube videos. It covered the distance in about 1.2 frames, so it is going around 25 m/s, or 90 km/h. I…
Wydruk około 0,45 €–0,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model flies really well and looks really cool! Please let the print cool down fully before carefully removing the glider as to not unevenly bend the wings. For better gliding bend the wings and tail wings slightly so there is about a…
Wydruk około 1,28 €–1,57 € nettoWstępna wycena jednego wariantu
Hello! This Glider has been based off the world’s largest passenger plane the Airbus A380-800 . Both the wing (and body) shape as well as the tail wing/stabiliser are nearly identical to the actual plane however to allow the plane to…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
Hey ! This is a fun project I really wanted to share with you because I had lots of fun with it ! The concept As you can see, the concept is simple, it is juste a tiny 3d printed glider with the wings made out of "soap bubble liquid"!…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Lukisegler 2.0 an RC electric glider with brushless drive Attention! Since this is a large project with many files, I will add more instructions here in the near future! Instructions for the fuselage are included in PDF format. The first…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello! This Glider has been based off one the worlds most sold aircraft since 1986, the Airbus A320 . Both the wing (and body) shape as well as the tail wing/stabiliser are nearly identical to the actual plane however to allow the plane…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
Ultralight glider by robotfriend scaled down to print on the mini+ or smaller printers. UPDATED TO V3 No modifications have been made aside from the scale down but it still flies well.
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Print Instructions Supports or ballast are not required. It is beneficial to have the perfect first layer function of the Prusa MK3.9(S), MK4(S), Core One, or XL. The following settings in PrusaSlicer are recommended: Printer Hardware…
Wydruk około 0,60 €–0,74 € nettoWstępna wycena jednego wariantu
beder filamet pro tento plme je pla+
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
Stokke sells for their Tripp Trapp high chair Extended Gliders for more stability. They are recommended by Stokke when using the Baby and Newborn Sets and are also helpful to prevent the chair from tripping over backwards when the child…
Wydruk około 1,34 €–1,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a stand for the Estes Solo model rocket. Since the rocket has asymmetrical fins it doesn't stand on its own. Just flip the glider upside down and rest the rocket on the stand. Also included is a replacement glider ring STL if you…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
This was printed on the Bambu P1P and printed in 23 minutes(17 minutes of actual printing) with white PLA basic. It used just under 10 grams of filament. Check out the Makerworld profile…
NOTE: After reading this paper on the effect of Tail Dihedral on stability, and experimenting on my design, it seems that it is a great idea to angle the Horizontal Stabilizer into a negative dihedral (anhedral). Or in other words, for…
Features: 10 by 10 inches (scale down in slicer for smaller sizes) Flies 35 to 50 feet 20 grams of PLA One part No supports needed! Usage: Pinch behind wings Adjustable flaps for optimal preformance Bend front wing flaps down and back…
This plane is designed to be printed directly onto thin tissue paper (17gsm) to produce a lightweight glider. Printing tips: To hold the tissue paper to build plate, I used thin 2mm magnets (mine were 30x10x2mm, but they can be smaller).…
the final version of my glider model, which is very easy to print. all it takes is one print, a little editing, and it's ready to fly! Recommended print parameters: 3 walls 20% infil Material PET-G (can use PLA but PLA is brittle so there…
This glider was printed on a Ender 3 V2 NEO with Creality PLA. The first two layers shall be printed slowly (50mm/s) to ensure layer adhesion. Settings 100% infill 0.2 mm layer height max speed 100 mm/s Post processing Use a hot air gun…
This model is a remix of another glider but I wanted to make it faster so I designed a hook for it. I went through 4 iterations of the hook to make it strong enough to withstand hard impacts. I've printed more of these than I can count,…
Prints on the Bambu P1S in exactly 30 minutes with the provided 3mf file. Print in PLA with 100% infill. Be careful not to bend the wings while removing from the build plate. Once you take the glider off the build plate, flip it over(flat…
Printsettings: 0.2mm ~20% infill (still testing!) no support needed use PETG! PLA might be to bridle You need a rubber launcher! like this or this I'm currently trying to build a rubber toy glider, which can be printed in one piece…
V2: Version 2 is now available! The pinch grip has been removed and replaced with a hook to launch the glider with a rubber band. A rubber band holder/handle is also included. (Gif of V2 flying has been added at the bottom of this post!)…
This glider will be: Furthest gliding Quickest to print Printable on Prusa mini Continually improved through Iterative design Flight preparation: Bend wings upward (5 degrees is best I've found) (Dihedral) Bend rear elevators UP (points…
This is the final iteration of my lightweight 3D printable glider, developed and optimized after beta phase. During the beta stage, I tested balance and tail geometry. Based on "flight trials", the rear section (tail assembly) has been…
There are a couple of problems with most of the 3D printed flying rings: Firstly, it's difficult to get the right mass distribution with 3D printed plastic. Secondly, they are damnedably difficult to throw with the proper spin, and liable…
Lukisegler-NG XS Span: approx. 900 mm Body length: approx. 500 mm Take-off weight (LW-PLA): approx. 100 g Controls: elevator / aileron Center of gravity: 7 mm behind the profile nose (next to the fuselage) Rudder deflections: aileron…
use 30% infil but also dont chuck the plane at the ground just give it light throw fold back wings up like in picture. also if you remix my model please honor the original creator. hope you guys like it
This model is the V2 version of the original VasePlane which can be found here . This glider is inspired by the stereotypical single seat fighter jet appearance and has a hook just under the nose so that a rubber band can be used to…
UPDATE 4: tests with kf airfoil wing very successful, can fly longer, faster and stable without fluttering UPDATE 3: test video of glider 1: https://youtube.com/shorts/DSoBWi8LOhU UPDATE 2: the first version's wing can be stiffened with…
CArts Lukisegler !! Attention !! There is an updated version of the fuselage of the Lukisegler: https://www.printables.com/de/model/927540-lukisegler-20-electrical-rc-glider CArts Lukisegler (english) Span: approx. 1700 mm Body length:…
Overview : One of my favourite bird is common swift. The true kings of flying. It is the only species that spends most of its life in the air including eating, drinking, mating and even sleeping. They can spend up to 10 months in the air…
UPDATE: I have made another glider that blows this one out of the water. It may take slightly longer to print but trust me it is worth it. Check it out yourself! Viper Glider (Impressive Sturdy Glider) by jSamz12 | Download free STL model…
The first two layers use variable layer height to keep the wing thickness at only 0.2 mm while still maintaining better strength using two printed layers. A lightweight miniature glider plane designed for simple hand launching and smooth…
After designing my business card glider , I decided to try an all 3D printed design. Taking a lot of inspiration from exosequitur's collection of gliders , I came up with this smooth gliding design that just fits on the bed of a Prusa…
This is a super fun toy, and the best part about is that it is print in place! Simply slide of rubber band onto the launcher, and have fun! The plane is designed so that with its thin wings, it can be manipulated to fly in any way. By…
This model has been superseded by my remix that improves the interference fit I suggest downloading the new version. https://www.printables.com/model/1736993-hoop-glider-redux-improved-interference-fit This is a ring wing glider also…
Glider modelled after the silhouette of a Nightfury dragon. I saw Sevro's dragon glider and I had to make my own. Printing Instructions : Print at 100% infill to ensure proper weight and with the 105% first layer extrusion width to ensure…
This is a scaled flyable micro version of the ASW20 sailplane from Schleicher. The model was created to be lightweight and printable in normal PLA. Because of it's lightweight behaviour it's a little bit fiddly to get it together properly…
This glider can very easily be launched by hand, just as a paper airplane would. It glides very well. There is also a stand for displaying your glider when not being used. I hope everyone enjoys this I have put many hours into it. If…
Print as a gift or toy for you fold the wings up for more action (sorry i could not get an image :D)
I updated all files that were in giant dimensions and reduced the size of the wings a little to better frame Use 100% filling with some hard material and with thin layers, as this model has small and precise parts that fit together, after…
Prints in 15 minutes on the Bambu P1P, 33 on the Ender 3 V2. Once printed, wait for the hotbed to cool down and gently remove with a scraper tool. Bend the elevator slightly upwards and bend the ends of the wings up. Hold the plane from…
This is my model of the Death Glider from the Stargate franchise. I made the model myself and printed it and painted it. The model has all the features seen in the show - foldable wings, retractable cockpit windows, retractable cockpit…
This stomp rocket/glider combo has an angled launch tube, making it great for inter-cubicle warfare. Providing, of course, everyone is wearing safety glasses. Truth be told, the glider is a little on the heavy side, so don't expect long,…
PRINT SETTINGS Wing & Elevator Filament: PETG Perimeters: 4 Layer thickness: 0.1 mm First layer: 0.1 mm Infill density: 100% Overlap Infill/Perimeters: 30% Fuselage Filament: PETG Perimeters: 4 Layer thickness: 0.1 mm First layer: 0.1 mm…
Have the burning desire to conquer the skies? Then you're not alone. The pioneers of aviation risked their lives to learn how to control their barely flying contraptions. You don't have to risk yours to re-imagine their early feats with…
Ultralight Glider - Start Trek (Star Trek Online STO) Odyssey Class USS Enterprise 1701-F. Print at 0.2mm layer height. Carefully remove from build plate (use scraper from front and slowly work your way down through the nacelles). If you…
Este modelo é dividido em duas partes com pinos separados para não precisar de suporte
Fun little glider plane powered by Nerf. Modeled to fit with a Nerf Jolt but should work with most single-shot front loaders. Tested on Jolt and Sidestrike with success. Simply load the blaster with a dart as normal, then slide the glider…
Quick howto print planeur15_crochet.stl, preferably in PETG, in vase mode with 0.18 layer height, 30mm solid bottom at 20mm/s with cooling fan enabled at full speed. print lanceur.stl normally in PLA (0.15 layer height, 2 perimeters, 10%…
Lightweight glider plane for kids
Printing instructions: Add some extra veritcal shells to increase durabilitie of the wings Remove “Elephant foot compensation” to make the connection link at the tail wing work. Let the model cool down after printing. Removing it while it…
Intro I love flying wing gliders, but they're very difficult to launch by hand with any significant flight time due to instability at high speeds and typically large aspect ratio. I came across expired US Patent 4836817 for a folding wing…
Rubber band powered gun for launching a glider. Minimalistic model for a small consumption of material. Easy to print and assembly. I printed it on MINI+ with 0,4mm nozzle and PLA. Print info Body, Cover and Trigger need to be printed…
Small aviator for a gift at a model building show. At our exhibition I printed the planes with my Delta printer and gave them away to children. One template is with text and one without for your own text. The model is flat at the bottom…
Glider Presenting you the aerodynamically designed hand launchable glider. The design incorporates features favouring adequate lift, lower drag and yaw…providing a stable flight to the glider. It is to be printed as separate parts and…
This model is a folding wing glider, tilt the wings down and backward and it will fly like a dart, once it hits its apex the rubber band will be able to overcome air resistance and will flip the wings into glide configuration. With…
Stealth Glider Concept I designed in Blender for the Printables contest! Use the least possible material, so it comes out light! I recommend 0.12 layer height, with no more than 2 walls, and below 4% infill For optimal flight/gliding it…
**please click download all! ** This is a super fun glider with a satisfying launcher mechanism that I made on fusion! This is the best thing I have designed on fusion yet, and I will focus more on this kind of thing if it “takes off.” I…
Flies slower and more accurately than v2, at the cost of reliability and build difficulty. Is more durable and can be modified more. Print with 100% infill in PLA. A brim isn't needed. Wait until the build plate is cool before removing…
Das ist ein Haken der für die Thule Produktreihe (Urban Glider 2/ Chariot Sport / etc.) funktioniert. Im Gegensatz zum Original ist er etwas größer.
This is a detailed scale-model of the popular Ka8 Glider! Facts: Wingspan: 35cm Length: 16cm Height: ca. 5cm Update 06.03.2023 : Reworked geometry at the wings! Especially the thin areas around the trailing edge and the aileron create a…
The glider prints in two halfs, that way you dont need supports. For print settings I used the standard 0.1mm profile and increased support to 25%. That way the balance front to back is pretty spot on. You will probably also want to turn…
A simple glider inpired by a paper airplane. Instructions: Print with low or no infill as it will be to nose heavy if you put infill Use 2 walls Make sure to level your bed properly before starting the print Any remixes are very welcome…
Remember those gliders you would buy at the book fair? Well, now you can print one. Print at .10mm at 5% infill.
Model on photos is printed in 70% scale.
A glider that is 216 mm in width. Should print on most printers.
Your printer has to be able to print smooth 1st and 2nd layers. PLA 0.20 mm layer height 2 perimeters At least 15% infill Instructions: Glue the parts together with plastic glue, hot glue, or superglue. If throwing, hold the glider…
Overview and Background Have you ever considered how aircraft are designed and tested? The search of faster, safer, and better air travel is constantly producing improvements to aircraft designs. An important step in the design process is…
Here is the Sugar Glider model! This free listing includes only the single-color STL for printing. On my Patreon you'll get the multicolor 3MF files, easy-to-paint STLs, keychain versions and split-color files, plus access to 60+ other…
On my cults page you can download planes like this one on a larger scale and detail, they are for sale for 10 euros https://cults3d.com/es/usuarios/ivangonzalezm/creaci%C3%B3n Print Settings Printer Brand: ELEGOO Printer: ELEGOO Neptune 2…
This is my first upload here – I spent a huge amount of time over the last few weeks designing and perfecting this, and in the end I decided to share it. This is a working, balanced, aerodynamic glider that can be thrown, or launched from…
Quick, fun print for a kid or someone who likes the avatar or gliders. Less than 30 min print time! Ik it looks silly with the front that way but I wanted it to be fully 3d printed. Make sure you have a good first layer! -90% infill (this…
Glider with a futuristic-looking outline, prints in one step Instructions Print with 100% fill, I used PLA with 0.2mm first layer, 0.1mm layers for the rest. You'll probably need to bend up the tail a little to get it trimmed and bend up…
Made for the Printables ‘make it fly’ event. A flexible glider design with multiple variants, designed to print flat at standard size on any printer 210x210 square or larger (with diagonal orientation). Instructions for use: Print solid…
A plane that is printed in three parts. 1: Wing 217(L) x 40(W) mm 2: Tail 90(L) x 20(W) x 25(H) mm 3: Nose cone 23(L) x 10(dia) mm The wings and tail are orientated to print along the leading edge. Filamant: PLA (printed versions in red…
WITHOUT ELECTRONICS 530 GR. READY TO FLY 780 GR CG 76mm from the leading edge. 2 METER 3D PRINTABLE CIRRUS GLIDER. I SATTLED ON THIS DESIGN AFTER MANY ITERATIONS. WINGS ARE NOT FULLY 3D PRINTED. YOU NEED TO COVER WİTH COVERING FILM. I…
Original model: https://www.printables.com/de/model/577942-simple-indoor-glider-v2 Same print settings and same Instructions :-)
A 750mm Wing for rc gliders that can be printed in PETG, with spaces for a 10mm dowel as supporting spar, with connector in middle allowing for one 500mm dowel and 1 250mm dowel. This allows to buy 3 500mm dowles for both wings. Suitable…
HLG Glider: HLG Glider is designed to be accessible and functional 3D printed hand-throw glider. All parts are printed, the only additional component is CA glue. Glider is designed to be printed out of regular non-foaming PLA using 0.3 mm…
Back in 1966, Wham-o introduced the first commercial version of this type of glider called the Turbo-Tube. This was followed by the Skyro, the Toobee, the Zoom Toob and the X-Zylo. Tossed like a football with a little spin, these fliers…
Model Blaniku L13 - NElítá Model of L13 Blanik - no flight
Wings are now more than one layer thick, more durable. BEND THE TAIL TIPS UP AND ADJUST THE ELEVATORS.
mini glider v1.1 by Alex scaled down to 170mm wingspan to fit on the Prusa Mini+ or printers with smaller beds.
The Curly Bracket (AKA "{" ) is a one piece, minimal design glider with a whimsical, typographic aesthetic. Also looking like an open book, the design was based on fond memories of playing with stunt paper planes. These were the kind of…
This is a 2 pieces glider model. Supports: no Infill: 0% Walls: 2 Printed with 200%, both wings rotated to be printed upwards and later glued to get a 24cm wide glider, 25g weight with PLA. Thrown slightly upward inclined like shown in…
MQ-9 REAPER (Predator-B) model cleaned to the best of my ability designed to be thrown. Was aiming for a medium glide with proper aerofoil that fits on a Prusa mini 180mmx180mm bed; prints within 30mins without supports (Printed in wet…
This is the first model which I have uploaded, so please let me know if there is any issue with the file. Print Settings: Infill: 100% Seam Position: random Perimeters: 3 This is a quick experiment to make a glider that could be taken…
Great tool for launching gliders, rockets, and other things. Many other people have had issues with hitting their fingers when launching so here is the solution. 5.5g of filament and 17 min print on Bambu printers. The design was made so…
3d printed lightweight glider Make sure the plane is printed solid. Experiment with the angle of the wings and the pitch for the best results. Finaly make sure to throw the glider slowly. Happy printing :)
This is a boeing 737 without details and the engine. Because im lazy i did not terminate it. So i searched if the boeing 737 can glide. And the answer was yes. (I am just 11 years old) I did not printed it ):
You know the inner turmoil that results when you go to order business cards and you see that 1000 cards cost only $2 more than the 250 cards you really need, but you think "why on earth would I need so many cards?". Maybe this business…
Lockheed SR-71 Blackbird Glider
created by Duct Tape Magic, and The Dragonator.
ENG: This is complete set for RC conversion of Lidl Glider. Cotrolled by wing rotartion, using two servos of HXT900 size. The center parts are in two variants - with full cage for servo and with reduced size and weight. Wings connected by…
Lukisegler update (english) Update of the wing-parts 10 (l/r) and 12 (l/r) from version 2 (v02) to version 3 (v03). The perforation for the servo-cables are now included in the printed part. It is no longer necessary to cut the holes by…
